* [Qemu-devel] [PATCH 01/26] acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
@ 2010-05-14 7:28 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 02/26] acpi: split out apm register emulation from acpi.c Isaku Yamahata
` (25 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:28 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel, Aurelien Jarno
Split out piix4 smbus routines from acpi.c into pm_smbus.c and
use it.
The split out smbus emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
---
changes v11 -> v12
- switch the prefix, pc to pm since this is used by not only pc,
but also mips. both filenames and symbol names.
changes v10 -> v11
- add DeviceState *qdev argument to pc_smbus_init()
for info qtree.
---
Makefile.target | 2 +
hw/acpi.c | 164 +++------------------------------------------------
hw/pm_smbus.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/pm_smbus.h | 21 +++++++
4 files changed, 209 insertions(+), 156 deletions(-)
create mode 100644 hw/pm_smbus.c
create mode 100644 hw/pm_smbus.h
diff --git a/Makefile.target b/Makefile.target
index c092900..c2539bd 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -195,6 +195,7 @@ obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmmouse.o vmport.o hpet.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
+obj-i386-y += pm_smbus.o
# shared objects
obj-ppc-y = ppc.o
@@ -220,6 +221,7 @@ obj-mips-y += dma.o vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o
obj-mips-y += piix4.o cirrus_vga.o
+obj-mips-y += pm_smbus.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
diff --git a/hw/acpi.c b/hw/acpi.c
index e3b63b7..ad8f4c7 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -17,6 +17,7 @@
*/
#include "hw.h"
#include "pc.h"
+#include "pm_smbus.h"
#include "pci.h"
#include "qemu-timer.h"
#include "sysemu.h"
@@ -39,15 +40,9 @@ typedef struct PIIX4PMState {
uint8_t apms;
QEMUTimer *tmr_timer;
int64_t tmr_overflow_time;
- i2c_bus *smbus;
- uint8_t smb_stat;
- uint8_t smb_ctl;
- uint8_t smb_cmd;
- uint8_t smb_addr;
- uint8_t smb_data0;
- uint8_t smb_data1;
- uint8_t smb_data[32];
- uint8_t smb_index;
+
+ PMSMBus smb;
+
qemu_irq irq;
qemu_irq cmos_s3;
qemu_irq smi_irq;
@@ -68,14 +63,6 @@ typedef struct PIIX4PMState {
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
-#define SMBHSTSTS 0x00
-#define SMBHSTCNT 0x02
-#define SMBHSTCMD 0x03
-#define SMBHSTADD 0x04
-#define SMBHSTDAT0 0x05
-#define SMBHSTDAT1 0x06
-#define SMBBLKDAT 0x07
-
static PIIX4PMState *pm_state;
static uint32_t get_pmtmr(PIIX4PMState *s)
@@ -282,141 +269,6 @@ static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
#endif
}
-static void smb_transaction(PIIX4PMState *s)
-{
- uint8_t prot = (s->smb_ctl >> 2) & 0x07;
- uint8_t read = s->smb_addr & 0x01;
- uint8_t cmd = s->smb_cmd;
- uint8_t addr = s->smb_addr >> 1;
- i2c_bus *bus = s->smbus;
-
-#ifdef DEBUG
- printf("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
-#endif
- switch(prot) {
- case 0x0:
- smbus_quick_command(bus, addr, read);
- break;
- case 0x1:
- if (read) {
- s->smb_data0 = smbus_receive_byte(bus, addr);
- } else {
- smbus_send_byte(bus, addr, cmd);
- }
- break;
- case 0x2:
- if (read) {
- s->smb_data0 = smbus_read_byte(bus, addr, cmd);
- } else {
- smbus_write_byte(bus, addr, cmd, s->smb_data0);
- }
- break;
- case 0x3:
- if (read) {
- uint16_t val;
- val = smbus_read_word(bus, addr, cmd);
- s->smb_data0 = val;
- s->smb_data1 = val >> 8;
- } else {
- smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
- }
- break;
- case 0x5:
- if (read) {
- s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data);
- } else {
- smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
- }
- break;
- default:
- goto error;
- }
- return;
-
- error:
- s->smb_stat |= 0x04;
-}
-
-static void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
- PIIX4PMState *s = opaque;
- addr &= 0x3f;
-#ifdef DEBUG
- printf("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
-#endif
- switch(addr) {
- case SMBHSTSTS:
- s->smb_stat = 0;
- s->smb_index = 0;
- break;
- case SMBHSTCNT:
- s->smb_ctl = val;
- if (val & 0x40)
- smb_transaction(s);
- break;
- case SMBHSTCMD:
- s->smb_cmd = val;
- break;
- case SMBHSTADD:
- s->smb_addr = val;
- break;
- case SMBHSTDAT0:
- s->smb_data0 = val;
- break;
- case SMBHSTDAT1:
- s->smb_data1 = val;
- break;
- case SMBBLKDAT:
- s->smb_data[s->smb_index++] = val;
- if (s->smb_index > 31)
- s->smb_index = 0;
- break;
- default:
- break;
- }
-}
-
-static uint32_t smb_ioport_readb(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
- uint32_t val;
-
- addr &= 0x3f;
- switch(addr) {
- case SMBHSTSTS:
- val = s->smb_stat;
- break;
- case SMBHSTCNT:
- s->smb_index = 0;
- val = s->smb_ctl & 0x1f;
- break;
- case SMBHSTCMD:
- val = s->smb_cmd;
- break;
- case SMBHSTADD:
- val = s->smb_addr;
- break;
- case SMBHSTDAT0:
- val = s->smb_data0;
- break;
- case SMBHSTDAT1:
- val = s->smb_data1;
- break;
- case SMBBLKDAT:
- val = s->smb_data[s->smb_index++];
- if (s->smb_index > 31)
- s->smb_index = 0;
- break;
- default:
- val = 0;
- break;
- }
-#ifdef DEBUG
- printf("SMB readb port=0x%04x val=0x%02x\n", addr, val);
-#endif
- return val;
-}
-
static void pm_io_space_update(PIIX4PMState *s)
{
uint32_t pm_io_base;
@@ -545,8 +397,8 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
pci_conf[0x90] = smb_io_base | 1;
pci_conf[0x91] = smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
- register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, s);
- register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, s);
+ register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
+ register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
@@ -554,13 +406,13 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
vmstate_register(0, &vmstate_acpi, s);
- s->smbus = i2c_init_bus(NULL, "i2c");
+ pm_smbus_init(NULL, &s->smb);
s->irq = sci_irq;
s->cmos_s3 = cmos_s3;
s->smi_irq = smi_irq;
qemu_register_reset(piix4_reset, s);
- return s->smbus;
+ return s->smb.smbus;
}
#define GPE_BASE 0xafe0
diff --git a/hw/pm_smbus.c b/hw/pm_smbus.c
new file mode 100644
index 0000000..6ef6b9e
--- /dev/null
+++ b/hw/pm_smbus.c
@@ -0,0 +1,178 @@
+/*
+ * PC SMBus implementation
+ * splitted from acpi.c
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+ */
+#include "hw.h"
+#include "pc.h"
+#include "pm_smbus.h"
+#include "pci.h"
+#include "qemu-timer.h"
+#include "sysemu.h"
+#include "i2c.h"
+#include "smbus.h"
+#include "kvm.h"
+
+/* no save/load? */
+
+#define SMBHSTSTS 0x00
+#define SMBHSTCNT 0x02
+#define SMBHSTCMD 0x03
+#define SMBHSTADD 0x04
+#define SMBHSTDAT0 0x05
+#define SMBHSTDAT1 0x06
+#define SMBBLKDAT 0x07
+
+static void smb_transaction(PMSMBus *s)
+{
+ uint8_t prot = (s->smb_ctl >> 2) & 0x07;
+ uint8_t read = s->smb_addr & 0x01;
+ uint8_t cmd = s->smb_cmd;
+ uint8_t addr = s->smb_addr >> 1;
+ i2c_bus *bus = s->smbus;
+
+#ifdef DEBUG
+ printf("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
+#endif
+ switch(prot) {
+ case 0x0:
+ smbus_quick_command(bus, addr, read);
+ break;
+ case 0x1:
+ if (read) {
+ s->smb_data0 = smbus_receive_byte(bus, addr);
+ } else {
+ smbus_send_byte(bus, addr, cmd);
+ }
+ break;
+ case 0x2:
+ if (read) {
+ s->smb_data0 = smbus_read_byte(bus, addr, cmd);
+ } else {
+ smbus_write_byte(bus, addr, cmd, s->smb_data0);
+ }
+ break;
+ case 0x3:
+ if (read) {
+ uint16_t val;
+ val = smbus_read_word(bus, addr, cmd);
+ s->smb_data0 = val;
+ s->smb_data1 = val >> 8;
+ } else {
+ smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+ }
+ break;
+ case 0x5:
+ if (read) {
+ s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data);
+ } else {
+ smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+ }
+ break;
+ default:
+ goto error;
+ }
+ return;
+
+ error:
+ s->smb_stat |= 0x04;
+}
+
+void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ PMSMBus *s = opaque;
+ addr &= 0x3f;
+#ifdef DEBUG
+ printf("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
+#endif
+ switch(addr) {
+ case SMBHSTSTS:
+ s->smb_stat = 0;
+ s->smb_index = 0;
+ break;
+ case SMBHSTCNT:
+ s->smb_ctl = val;
+ if (val & 0x40)
+ smb_transaction(s);
+ break;
+ case SMBHSTCMD:
+ s->smb_cmd = val;
+ break;
+ case SMBHSTADD:
+ s->smb_addr = val;
+ break;
+ case SMBHSTDAT0:
+ s->smb_data0 = val;
+ break;
+ case SMBHSTDAT1:
+ s->smb_data1 = val;
+ break;
+ case SMBBLKDAT:
+ s->smb_data[s->smb_index++] = val;
+ if (s->smb_index > 31)
+ s->smb_index = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+uint32_t smb_ioport_readb(void *opaque, uint32_t addr)
+{
+ PMSMBus *s = opaque;
+ uint32_t val;
+
+ addr &= 0x3f;
+ switch(addr) {
+ case SMBHSTSTS:
+ val = s->smb_stat;
+ break;
+ case SMBHSTCNT:
+ s->smb_index = 0;
+ val = s->smb_ctl & 0x1f;
+ break;
+ case SMBHSTCMD:
+ val = s->smb_cmd;
+ break;
+ case SMBHSTADD:
+ val = s->smb_addr;
+ break;
+ case SMBHSTDAT0:
+ val = s->smb_data0;
+ break;
+ case SMBHSTDAT1:
+ val = s->smb_data1;
+ break;
+ case SMBBLKDAT:
+ val = s->smb_data[s->smb_index++];
+ if (s->smb_index > 31)
+ s->smb_index = 0;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+#ifdef DEBUG
+ printf("SMB readb port=0x%04x val=0x%02x\n", addr, val);
+#endif
+ return val;
+}
+
+void pm_smbus_init(DeviceState *parent, PMSMBus *smb)
+{
+ smb->smbus = i2c_init_bus(parent, "i2c");
+}
diff --git a/hw/pm_smbus.h b/hw/pm_smbus.h
new file mode 100644
index 0000000..4750a40
--- /dev/null
+++ b/hw/pm_smbus.h
@@ -0,0 +1,21 @@
+#ifndef PM_SMBUS_H
+#define PM_SMBUS_H
+
+typedef struct PMSMBus {
+ i2c_bus *smbus;
+
+ uint8_t smb_stat;
+ uint8_t smb_ctl;
+ uint8_t smb_cmd;
+ uint8_t smb_addr;
+ uint8_t smb_data0;
+ uint8_t smb_data1;
+ uint8_t smb_data[32];
+ uint8_t smb_index;
+} PMSMBus;
+
+void pm_smbus_init(DeviceState *parent, PMSMBus *smb);
+void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val);
+uint32_t smb_ioport_readb(void *opaque, uint32_t addr);
+
+#endif /* !PM_SMBUS_H */
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 02/26] acpi: split out apm register emulation from acpi.c
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
2010-05-14 7:28 ` [Qemu-devel] [PATCH 01/26] acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 03/26] acpi: add acpi constants from linux header files and use them Isaku Yamahata
` (24 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel, Aurelien Jarno
Split out apm register emulation for acpi.c into apm.c.
The apm emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
---
changes v11 -> v12
- drop pc prefix as this is used by not only pc, but also mips.
including filenames and symbol names
---
Makefile.target | 4 +-
hw/acpi.c | 61 +++++++++++----------------------------
hw/apm.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/apm.h | 22 ++++++++++++++
4 files changed, 127 insertions(+), 45 deletions(-)
create mode 100644 hw/apm.c
create mode 100644 hw/apm.h
diff --git a/Makefile.target b/Makefile.target
index c2539bd..4e1101b 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -195,7 +195,7 @@ obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmmouse.o vmport.o hpet.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pm_smbus.o
+obj-i386-y += pm_smbus.o apm.o
# shared objects
obj-ppc-y = ppc.o
@@ -221,7 +221,7 @@ obj-mips-y += dma.o vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o
obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-y += pm_smbus.o
+obj-mips-y += pm_smbus.o apm.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
diff --git a/hw/acpi.c b/hw/acpi.c
index ad8f4c7..8dc9538 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -17,6 +17,7 @@
*/
#include "hw.h"
#include "pc.h"
+#include "apm.h"
#include "pm_smbus.h"
#include "pci.h"
#include "qemu-timer.h"
@@ -36,8 +37,9 @@ typedef struct PIIX4PMState {
uint16_t pmsts;
uint16_t pmen;
uint16_t pmcntrl;
- uint8_t apmc;
- uint8_t apms;
+
+ APMState apm;
+
QEMUTimer *tmr_timer;
int64_t tmr_overflow_time;
@@ -218,48 +220,22 @@ static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
return val;
}
-static void pm_smi_writeb(void *opaque, uint32_t addr, uint32_t val)
+static void apm_ctrl_changed(uint32_t val, void *arg)
{
- PIIX4PMState *s = opaque;
- addr &= 1;
-#ifdef DEBUG
- printf("pm_smi_writeb addr=0x%x val=0x%02x\n", addr, val);
-#endif
- if (addr == 0) {
- s->apmc = val;
-
- /* ACPI specs 3.0, 4.7.2.5 */
- if (val == ACPI_ENABLE) {
- s->pmcntrl |= SCI_EN;
- } else if (val == ACPI_DISABLE) {
- s->pmcntrl &= ~SCI_EN;
- }
+ PIIX4PMState *s = arg;
- if (s->dev.config[0x5b] & (1 << 1)) {
- if (s->smi_irq) {
- qemu_irq_raise(s->smi_irq);
- }
- }
- } else {
- s->apms = val;
+ /* ACPI specs 3.0, 4.7.2.5 */
+ if (val == ACPI_ENABLE) {
+ s->pmcntrl |= SCI_EN;
+ } else if (val == ACPI_DISABLE) {
+ s->pmcntrl &= ~SCI_EN;
}
-}
-static uint32_t pm_smi_readb(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
- uint32_t val;
-
- addr &= 1;
- if (addr == 0) {
- val = s->apmc;
- } else {
- val = s->apms;
+ if (s->dev.config[0x5b] & (1 << 1)) {
+ if (s->smi_irq) {
+ qemu_irq_raise(s->smi_irq);
+ }
}
-#ifdef DEBUG
- printf("pm_smi_readb addr=0x%x val=0x%02x\n", addr, val);
-#endif
- return val;
}
static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
@@ -315,8 +291,7 @@ static const VMStateDescription vmstate_acpi = {
VMSTATE_UINT16(pmsts, PIIX4PMState),
VMSTATE_UINT16(pmen, PIIX4PMState),
VMSTATE_UINT16(pmcntrl, PIIX4PMState),
- VMSTATE_UINT8(apmc, PIIX4PMState),
- VMSTATE_UINT8(apms, PIIX4PMState),
+ VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
VMSTATE_TIMER(tmr_timer, PIIX4PMState),
VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
VMSTATE_END_OF_LIST()
@@ -375,8 +350,8 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
pci_conf[0x40] = 0x01; /* PM io base read only bit */
- register_ioport_write(0xb2, 2, 1, pm_smi_writeb, s);
- register_ioport_read(0xb2, 2, 1, pm_smi_readb, s);
+ /* APM */
+ apm_init(&s->apm, apm_ctrl_changed, s);
register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
diff --git a/hw/apm.c b/hw/apm.c
new file mode 100644
index 0000000..d20db3d
--- /dev/null
+++ b/hw/apm.c
@@ -0,0 +1,85 @@
+/*
+ * QEMU PC APM controller Emulation
+ * This is split out from acpi.c
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "apm.h"
+#include "hw.h"
+#include "isa.h"
+
+//#define DEBUG
+
+/* fixed I/O location */
+#define APM_CNT_IOPORT 0xb2
+#define APM_STS_IOPORT 0xb3
+
+static void apm_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ APMState *apm = opaque;
+ addr &= 1;
+#ifdef DEBUG
+ printf("apm_ioport_writeb addr=0x%x val=0x%02x\n", addr, val);
+#endif
+ if (addr == 0) {
+ apm->apmc = val;
+
+ if (apm->callback) {
+ (apm->callback)(val, apm->arg);
+ }
+ } else {
+ apm->apms = val;
+ }
+}
+
+static uint32_t apm_ioport_readb(void *opaque, uint32_t addr)
+{
+ APMState *apm = opaque;
+ uint32_t val;
+
+ addr &= 1;
+ if (addr == 0) {
+ val = apm->apmc;
+ } else {
+ val = apm->apms;
+ }
+#ifdef DEBUG
+ printf("apm_ioport_readb addr=0x%x val=0x%02x\n", addr, val);
+#endif
+ return val;
+}
+
+const VMStateDescription vmstate_apm = {
+ .name = "APM State",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(apmc, APMState),
+ VMSTATE_UINT8(apms, APMState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+void apm_init(APMState *apm, apm_ctrl_changed_t callback, void *arg)
+{
+ apm->callback = callback;
+ apm->arg = arg;
+
+ /* ioport 0xb2, 0xb3 */
+ register_ioport_write(APM_CNT_IOPORT, 2, 1, apm_ioport_writeb, apm);
+ register_ioport_read(APM_CNT_IOPORT, 2, 1, apm_ioport_readb, apm);
+}
diff --git a/hw/apm.h b/hw/apm.h
new file mode 100644
index 0000000..f7c741e
--- /dev/null
+++ b/hw/apm.h
@@ -0,0 +1,22 @@
+#ifndef APM_H
+#define APM_H
+
+#include <stdint.h>
+#include "qemu-common.h"
+#include "hw.h"
+
+typedef void (*apm_ctrl_changed_t)(uint32_t val, void *arg);
+
+typedef struct APMState {
+ uint8_t apmc;
+ uint8_t apms;
+
+ apm_ctrl_changed_t callback;
+ void *arg;
+} APMState;
+
+void apm_init(APMState *s, apm_ctrl_changed_t callback, void *arg);
+
+extern const VMStateDescription vmstate_apm;
+
+#endif /* APM_H */
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 03/26] acpi: add acpi constants from linux header files and use them.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
2010-05-14 7:28 ` [Qemu-devel] [PATCH 01/26] acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 02/26] acpi: split out apm register emulation from acpi.c Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 04/26] acpi: split acpi.c into the common part and the piix4 part Isaku Yamahata
` (23 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
add acpi constants from linux header files and
replace the old constants with them.
The acpi constants will be used by other file.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/acpi.c | 56 +++++++++++++++++++------------------------
hw/acpi.h | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 103 insertions(+), 31 deletions(-)
create mode 100644 hw/acpi.h
diff --git a/hw/acpi.c b/hw/acpi.c
index 8dc9538..891378c 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -24,12 +24,10 @@
#include "sysemu.h"
#include "i2c.h"
#include "smbus.h"
+#include "acpi.h"
//#define DEBUG
-/* i82731AB (PIIX4) compatible power management function */
-#define PM_FREQ 3579545
-
#define ACPI_DBG_IO_ADDR 0xb044
typedef struct PIIX4PMState {
@@ -51,17 +49,6 @@ typedef struct PIIX4PMState {
int kvm_enabled;
} PIIX4PMState;
-#define RSM_STS (1 << 15)
-#define PWRBTN_STS (1 << 8)
-#define RTC_EN (1 << 10)
-#define PWRBTN_EN (1 << 8)
-#define GBL_EN (1 << 5)
-#define TMROF_EN (1 << 0)
-
-#define SCI_EN (1 << 0)
-
-#define SUS_EN (1 << 13)
-
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
@@ -70,7 +57,7 @@ static PIIX4PMState *pm_state;
static uint32_t get_pmtmr(PIIX4PMState *s)
{
uint32_t d;
- d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
return d & 0xffffff;
}
@@ -78,9 +65,10 @@ static int get_pmsts(PIIX4PMState *s)
{
int64_t d;
- d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
+ get_ticks_per_sec());
if (d >= s->tmr_overflow_time)
- s->pmsts |= TMROF_EN;
+ s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
return s->pmsts;
}
@@ -91,11 +79,16 @@ static void pm_update_sci(PIIX4PMState *s)
pmsts = get_pmsts(s);
sci_level = (((pmsts & s->pmen) &
- (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
+ (ACPI_BITMASK_RT_CLOCK_ENABLE |
+ ACPI_BITMASK_POWER_BUTTON_ENABLE |
+ ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
+ ACPI_BITMASK_TIMER_ENABLE)) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
- if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
- expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_FREQ);
+ if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
+ !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
+ expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
+ PM_TIMER_FREQUENCY);
qemu_mod_timer(s->tmr_timer, expire_time);
} else {
qemu_del_timer(s->tmr_timer);
@@ -118,9 +111,9 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
int64_t d;
int pmsts;
pmsts = get_pmsts(s);
- if (pmsts & val & TMROF_EN) {
+ if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
/* if TMRSTS is reset, then compute the new overflow time */
- d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ,
+ d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
get_ticks_per_sec());
s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
}
@@ -135,8 +128,8 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
case 0x04:
{
int sus_typ;
- s->pmcntrl = val & ~(SUS_EN);
- if (val & SUS_EN) {
+ s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
+ if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
sus_typ = (val >> 10) & 7;
switch(sus_typ) {
@@ -144,9 +137,10 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
qemu_system_shutdown_request();
break;
case 1:
- /* RSM_STS should be set on resume. Pretend that resume
- was caused by power button */
- s->pmsts |= (RSM_STS | PWRBTN_STS);
+ /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
+ Pretend that resume was caused by power button */
+ s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
+ ACPI_BITMASK_POWER_BUTTON_STATUS);
qemu_system_reset_request();
if (s->cmos_s3) {
qemu_irq_raise(s->cmos_s3);
@@ -226,9 +220,9 @@ static void apm_ctrl_changed(uint32_t val, void *arg)
/* ACPI specs 3.0, 4.7.2.5 */
if (val == ACPI_ENABLE) {
- s->pmcntrl |= SCI_EN;
+ s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
} else if (val == ACPI_DISABLE) {
- s->pmcntrl &= ~SCI_EN;
+ s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
}
if (s->dev.config[0x5b] & (1 << 1)) {
@@ -320,8 +314,8 @@ static void piix4_powerdown(void *opaque, int irq, int power_failing)
if (!s) {
qemu_system_shutdown_request();
- } else if (s->pmen & PWRBTN_EN) {
- s->pmsts |= PWRBTN_EN;
+ } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
+ s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
pm_update_sci(s);
}
}
diff --git a/hw/acpi.h b/hw/acpi.h
new file mode 100644
index 0000000..51b56b6
--- /dev/null
+++ b/hw/acpi.h
@@ -0,0 +1,78 @@
+#ifndef QEMU_HW_ACPI_H
+#define QEMU_HW_ACPI_H
+/*
+ * Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
+ * VA Linux Systems Japan K.K.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
+ */
+
+/* from linux include/acpi/actype.h */
+/* Default ACPI register widths */
+
+#define ACPI_GPE_REGISTER_WIDTH 8
+#define ACPI_PM1_REGISTER_WIDTH 16
+#define ACPI_PM2_REGISTER_WIDTH 8
+#define ACPI_PM_TIMER_WIDTH 32
+
+/* PM Timer ticks per second (HZ) */
+#define PM_TIMER_FREQUENCY 3579545
+
+
+/* ACPI fixed hardware registers */
+
+/* from linux/drivers/acpi/acpica/aclocal.h */
+/* Masks used to access the bit_registers */
+
+/* PM1x_STS */
+#define ACPI_BITMASK_TIMER_STATUS 0x0001
+#define ACPI_BITMASK_BUS_MASTER_STATUS 0x0010
+#define ACPI_BITMASK_GLOBAL_LOCK_STATUS 0x0020
+#define ACPI_BITMASK_POWER_BUTTON_STATUS 0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_STATUS 0x0200
+#define ACPI_BITMASK_RT_CLOCK_STATUS 0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_STATUS 0x4000 /* ACPI 3.0 */
+#define ACPI_BITMASK_WAKE_STATUS 0x8000
+
+#define ACPI_BITMASK_ALL_FIXED_STATUS (\
+ ACPI_BITMASK_TIMER_STATUS | \
+ ACPI_BITMASK_BUS_MASTER_STATUS | \
+ ACPI_BITMASK_GLOBAL_LOCK_STATUS | \
+ ACPI_BITMASK_POWER_BUTTON_STATUS | \
+ ACPI_BITMASK_SLEEP_BUTTON_STATUS | \
+ ACPI_BITMASK_RT_CLOCK_STATUS | \
+ ACPI_BITMASK_WAKE_STATUS)
+
+/* PM1x_EN */
+#define ACPI_BITMASK_TIMER_ENABLE 0x0001
+#define ACPI_BITMASK_GLOBAL_LOCK_ENABLE 0x0020
+#define ACPI_BITMASK_POWER_BUTTON_ENABLE 0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_ENABLE 0x0200
+#define ACPI_BITMASK_RT_CLOCK_ENABLE 0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_DISABLE 0x4000 /* ACPI 3.0 */
+
+/* PM1x_CNT */
+#define ACPI_BITMASK_SCI_ENABLE 0x0001
+#define ACPI_BITMASK_BUS_MASTER_RLD 0x0002
+#define ACPI_BITMASK_GLOBAL_LOCK_RELEASE 0x0004
+#define ACPI_BITMASK_SLEEP_TYPE 0x1C00
+#define ACPI_BITMASK_SLEEP_ENABLE 0x2000
+
+/* PM2_CNT */
+#define ACPI_BITMASK_ARB_DISABLE 0x0001
+
+/* PM_TMR */
+
+#endif /* !QEMU_HW_ACPI_H */
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 04/26] acpi: split acpi.c into the common part and the piix4 part.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (2 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 03/26] acpi: add acpi constants from linux header files and use them Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 05/26] pc: initialize ioapic before use Isaku Yamahata
` (22 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
Makefile.target | 4 +-
hw/acpi.c | 562 -------------------------------------------
hw/{acpi.c => acpi_piix4.c} | 170 -------------
3 files changed, 2 insertions(+), 734 deletions(-)
copy hw/{acpi.c => acpi_piix4.c} (76%)
diff --git a/Makefile.target b/Makefile.target
index 4e1101b..9d44660 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -195,7 +195,7 @@ obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmmouse.o vmport.o hpet.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pm_smbus.o apm.o
+obj-i386-y += pm_smbus.o apm.o acpi_piix4.o
# shared objects
obj-ppc-y = ppc.o
@@ -221,7 +221,7 @@ obj-mips-y += dma.o vga.o i8259.o
obj-mips-y += g364fb.o jazz_led.o
obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o
obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-y += pm_smbus.o apm.o
+obj-mips-y += pm_smbus.o apm.o acpi_piix4.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
diff --git a/hw/acpi.c b/hw/acpi.c
index 891378c..4c4df56 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -17,572 +17,10 @@
*/
#include "hw.h"
#include "pc.h"
-#include "apm.h"
-#include "pm_smbus.h"
#include "pci.h"
-#include "qemu-timer.h"
#include "sysemu.h"
-#include "i2c.h"
-#include "smbus.h"
#include "acpi.h"
-//#define DEBUG
-
-#define ACPI_DBG_IO_ADDR 0xb044
-
-typedef struct PIIX4PMState {
- PCIDevice dev;
- uint16_t pmsts;
- uint16_t pmen;
- uint16_t pmcntrl;
-
- APMState apm;
-
- QEMUTimer *tmr_timer;
- int64_t tmr_overflow_time;
-
- PMSMBus smb;
-
- qemu_irq irq;
- qemu_irq cmos_s3;
- qemu_irq smi_irq;
- int kvm_enabled;
-} PIIX4PMState;
-
-#define ACPI_ENABLE 0xf1
-#define ACPI_DISABLE 0xf0
-
-static PIIX4PMState *pm_state;
-
-static uint32_t get_pmtmr(PIIX4PMState *s)
-{
- uint32_t d;
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
- return d & 0xffffff;
-}
-
-static int get_pmsts(PIIX4PMState *s)
-{
- int64_t d;
-
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- if (d >= s->tmr_overflow_time)
- s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
- return s->pmsts;
-}
-
-static void pm_update_sci(PIIX4PMState *s)
-{
- int sci_level, pmsts;
- int64_t expire_time;
-
- pmsts = get_pmsts(s);
- sci_level = (((pmsts & s->pmen) &
- (ACPI_BITMASK_RT_CLOCK_ENABLE |
- ACPI_BITMASK_POWER_BUTTON_ENABLE |
- ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
- ACPI_BITMASK_TIMER_ENABLE)) != 0);
- qemu_set_irq(s->irq, sci_level);
- /* schedule a timer interruption if needed */
- if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
- !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
- expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
- PM_TIMER_FREQUENCY);
- qemu_mod_timer(s->tmr_timer, expire_time);
- } else {
- qemu_del_timer(s->tmr_timer);
- }
-}
-
-static void pm_tmr_timer(void *opaque)
-{
- PIIX4PMState *s = opaque;
- pm_update_sci(s);
-}
-
-static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
-{
- PIIX4PMState *s = opaque;
- addr &= 0x3f;
- switch(addr) {
- case 0x00:
- {
- int64_t d;
- int pmsts;
- pmsts = get_pmsts(s);
- if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
- /* if TMRSTS is reset, then compute the new overflow time */
- d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
- get_ticks_per_sec());
- s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
- }
- s->pmsts &= ~val;
- pm_update_sci(s);
- }
- break;
- case 0x02:
- s->pmen = val;
- pm_update_sci(s);
- break;
- case 0x04:
- {
- int sus_typ;
- s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
- if (val & ACPI_BITMASK_SLEEP_ENABLE) {
- /* change suspend type */
- sus_typ = (val >> 10) & 7;
- switch(sus_typ) {
- case 0: /* soft power off */
- qemu_system_shutdown_request();
- break;
- case 1:
- /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
- Pretend that resume was caused by power button */
- s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
- ACPI_BITMASK_POWER_BUTTON_STATUS);
- qemu_system_reset_request();
- if (s->cmos_s3) {
- qemu_irq_raise(s->cmos_s3);
- }
- default:
- break;
- }
- }
- }
- break;
- default:
- break;
- }
-#ifdef DEBUG
- printf("PM writew port=0x%04x val=0x%04x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
- uint32_t val;
-
- addr &= 0x3f;
- switch(addr) {
- case 0x00:
- val = get_pmsts(s);
- break;
- case 0x02:
- val = s->pmen;
- break;
- case 0x04:
- val = s->pmcntrl;
- break;
- default:
- val = 0;
- break;
- }
-#ifdef DEBUG
- printf("PM readw port=0x%04x val=0x%04x\n", addr, val);
-#endif
- return val;
-}
-
-static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
-{
- // PIIX4PMState *s = opaque;
-#ifdef DEBUG
- addr &= 0x3f;
- printf("PM writel port=0x%04x val=0x%08x\n", addr, val);
-#endif
-}
-
-static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
-{
- PIIX4PMState *s = opaque;
- uint32_t val;
-
- addr &= 0x3f;
- switch(addr) {
- case 0x08:
- val = get_pmtmr(s);
- break;
- default:
- val = 0;
- break;
- }
-#ifdef DEBUG
- printf("PM readl port=0x%04x val=0x%08x\n", addr, val);
-#endif
- return val;
-}
-
-static void apm_ctrl_changed(uint32_t val, void *arg)
-{
- PIIX4PMState *s = arg;
-
- /* ACPI specs 3.0, 4.7.2.5 */
- if (val == ACPI_ENABLE) {
- s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
- } else if (val == ACPI_DISABLE) {
- s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
- }
-
- if (s->dev.config[0x5b] & (1 << 1)) {
- if (s->smi_irq) {
- qemu_irq_raise(s->smi_irq);
- }
- }
-}
-
-static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
-{
-#if defined(DEBUG)
- printf("ACPI: DBG: 0x%08x\n", val);
-#endif
-}
-
-static void pm_io_space_update(PIIX4PMState *s)
-{
- uint32_t pm_io_base;
-
- if (s->dev.config[0x80] & 1) {
- pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
- pm_io_base &= 0xffc0;
-
- /* XXX: need to improve memory and ioport allocation */
-#if defined(DEBUG)
- printf("PM: mapping to 0x%x\n", pm_io_base);
-#endif
- register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
- register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
- register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
- register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
- }
-}
-
-static void pm_write_config(PCIDevice *d,
- uint32_t address, uint32_t val, int len)
-{
- pci_default_write_config(d, address, val, len);
- if (range_covers_byte(address, len, 0x80))
- pm_io_space_update((PIIX4PMState *)d);
-}
-
-static int vmstate_acpi_post_load(void *opaque, int version_id)
-{
- PIIX4PMState *s = opaque;
-
- pm_io_space_update(s);
- return 0;
-}
-
-static const VMStateDescription vmstate_acpi = {
- .name = "piix4_pm",
- .version_id = 1,
- .minimum_version_id = 1,
- .minimum_version_id_old = 1,
- .post_load = vmstate_acpi_post_load,
- .fields = (VMStateField []) {
- VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
- VMSTATE_UINT16(pmsts, PIIX4PMState),
- VMSTATE_UINT16(pmen, PIIX4PMState),
- VMSTATE_UINT16(pmcntrl, PIIX4PMState),
- VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
- VMSTATE_TIMER(tmr_timer, PIIX4PMState),
- VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static void piix4_reset(void *opaque)
-{
- PIIX4PMState *s = opaque;
- uint8_t *pci_conf = s->dev.config;
-
- pci_conf[0x58] = 0;
- pci_conf[0x59] = 0;
- pci_conf[0x5a] = 0;
- pci_conf[0x5b] = 0;
-
- if (s->kvm_enabled) {
- /* Mark SMM as already inited (until KVM supports SMM). */
- pci_conf[0x5B] = 0x02;
- }
-}
-
-static void piix4_powerdown(void *opaque, int irq, int power_failing)
-{
- PIIX4PMState *s = opaque;
-
- if (!s) {
- qemu_system_shutdown_request();
- } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
- s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
- pm_update_sci(s);
- }
-}
-
-i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
- qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
- int kvm_enabled)
-{
- PIIX4PMState *s;
- uint8_t *pci_conf;
-
- s = (PIIX4PMState *)pci_register_device(bus,
- "PM", sizeof(PIIX4PMState),
- devfn, NULL, pm_write_config);
- pm_state = s;
- pci_conf = s->dev.config;
- pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
- pci_conf[0x06] = 0x80;
- pci_conf[0x07] = 0x02;
- pci_conf[0x08] = 0x03; // revision number
- pci_conf[0x09] = 0x00;
- pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
- pci_conf[0x3d] = 0x01; // interrupt pin 1
-
- pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
- /* APM */
- apm_init(&s->apm, apm_ctrl_changed, s);
-
- register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
-
- s->kvm_enabled = kvm_enabled;
- if (s->kvm_enabled) {
- /* Mark SMM as already inited to prevent SMM from running. KVM does not
- * support SMM mode. */
- pci_conf[0x5B] = 0x02;
- }
-
- /* XXX: which specification is used ? The i82731AB has different
- mappings */
- pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
- pci_conf[0x63] = 0x60;
- pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
- (serial_hds[1] != NULL ? 0x90 : 0);
-
- pci_conf[0x90] = smb_io_base | 1;
- pci_conf[0x91] = smb_io_base >> 8;
- pci_conf[0xd2] = 0x09;
- register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
- register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
-
- s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
-
- qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
-
- vmstate_register(0, &vmstate_acpi, s);
-
- pm_smbus_init(NULL, &s->smb);
- s->irq = sci_irq;
- s->cmos_s3 = cmos_s3;
- s->smi_irq = smi_irq;
- qemu_register_reset(piix4_reset, s);
-
- return s->smb.smbus;
-}
-
-#define GPE_BASE 0xafe0
-#define PCI_BASE 0xae00
-#define PCI_EJ_BASE 0xae08
-
-struct gpe_regs {
- uint16_t sts; /* status */
- uint16_t en; /* enabled */
-};
-
-struct pci_status {
- uint32_t up;
- uint32_t down;
-};
-
-static struct gpe_regs gpe;
-static struct pci_status pci0_status;
-
-static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
-{
- if (addr & 1)
- return (val >> 8) & 0xff;
- return val & 0xff;
-}
-
-static uint32_t gpe_readb(void *opaque, uint32_t addr)
-{
- uint32_t val = 0;
- struct gpe_regs *g = opaque;
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- val = gpe_read_val(g->sts, addr);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- val = gpe_read_val(g->en, addr);
- break;
- default:
- break;
- }
-
-#if defined(DEBUG)
- printf("gpe read %x == %x\n", addr, val);
-#endif
- return val;
-}
-
-static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
-{
- if (addr & 1)
- *cur = (*cur & 0xff) | (val << 8);
- else
- *cur = (*cur & 0xff00) | (val & 0xff);
-}
-
-static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
-{
- uint16_t x1, x0 = val & 0xff;
- int shift = (addr & 1) ? 8 : 0;
-
- x1 = (*cur >> shift) & 0xff;
-
- x1 = x1 & ~x0;
-
- *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
-}
-
-static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
- struct gpe_regs *g = opaque;
- switch (addr) {
- case GPE_BASE:
- case GPE_BASE + 1:
- gpe_reset_val(&g->sts, addr, val);
- break;
- case GPE_BASE + 2:
- case GPE_BASE + 3:
- gpe_write_val(&g->en, addr, val);
- break;
- default:
- break;
- }
-
-#if defined(DEBUG)
- printf("gpe write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
-{
- uint32_t val = 0;
- struct pci_status *g = opaque;
- switch (addr) {
- case PCI_BASE:
- val = g->up;
- break;
- case PCI_BASE + 4:
- val = g->down;
- break;
- default:
- break;
- }
-
-#if defined(DEBUG)
- printf("pcihotplug read %x == %x\n", addr, val);
-#endif
- return val;
-}
-
-static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
-{
- struct pci_status *g = opaque;
- switch (addr) {
- case PCI_BASE:
- g->up = val;
- break;
- case PCI_BASE + 4:
- g->down = val;
- break;
- }
-
-#if defined(DEBUG)
- printf("pcihotplug write %x <== %d\n", addr, val);
-#endif
-}
-
-static uint32_t pciej_read(void *opaque, uint32_t addr)
-{
-#if defined(DEBUG)
- printf("pciej read %x\n", addr);
-#endif
- return 0;
-}
-
-static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
-{
- BusState *bus = opaque;
- DeviceState *qdev, *next;
- PCIDevice *dev;
- int slot = ffs(val) - 1;
-
- QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
- dev = DO_UPCAST(PCIDevice, qdev, qdev);
- if (PCI_SLOT(dev->devfn) == slot) {
- qdev_free(qdev);
- }
- }
-
-
-#if defined(DEBUG)
- printf("pciej write %x <== %d\n", addr, val);
-#endif
-}
-
-static int piix4_device_hotplug(PCIDevice *dev, int state);
-
-void piix4_acpi_system_hot_add_init(PCIBus *bus)
-{
- register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
- register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe);
-
- register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status);
- register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, &pci0_status);
-
- register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
- register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
-
- pci_bus_hotplug(bus, piix4_device_hotplug);
-}
-
-static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
- g->sts |= 2;
- p->up |= (1 << slot);
-}
-
-static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
-{
- g->sts |= 2;
- p->down |= (1 << slot);
-}
-
-static int piix4_device_hotplug(PCIDevice *dev, int state)
-{
- int slot = PCI_SLOT(dev->devfn);
-
- pci0_status.up = 0;
- pci0_status.down = 0;
- if (state)
- enable_device(&pci0_status, &gpe, slot);
- else
- disable_device(&pci0_status, &gpe, slot);
- if (gpe.en & 2) {
- qemu_set_irq(pm_state->irq, 1);
- qemu_set_irq(pm_state->irq, 0);
- }
- return 0;
-}
-
struct acpi_table_header
{
char signature [4]; /* ACPI signature (4 ASCII characters) */
diff --git a/hw/acpi.c b/hw/acpi_piix4.c
similarity index 76%
copy from hw/acpi.c
copy to hw/acpi_piix4.c
index 891378c..1292d2b 100644
--- a/hw/acpi.c
+++ b/hw/acpi_piix4.c
@@ -20,7 +20,6 @@
#include "apm.h"
#include "pm_smbus.h"
#include "pci.h"
-#include "qemu-timer.h"
#include "sysemu.h"
#include "i2c.h"
#include "smbus.h"
@@ -582,172 +581,3 @@ static int piix4_device_hotplug(PCIDevice *dev, int state)
}
return 0;
}
-
-struct acpi_table_header
-{
- char signature [4]; /* ACPI signature (4 ASCII characters) */
- uint32_t length; /* Length of table, in bytes, including header */
- uint8_t revision; /* ACPI Specification minor version # */
- uint8_t checksum; /* To make sum of entire table == 0 */
- char oem_id [6]; /* OEM identification */
- char oem_table_id [8]; /* OEM table identification */
- uint32_t oem_revision; /* OEM revision number */
- char asl_compiler_id [4]; /* ASL compiler vendor ID */
- uint32_t asl_compiler_revision; /* ASL compiler revision number */
-} __attribute__((packed));
-
-char *acpi_tables;
-size_t acpi_tables_len;
-
-static int acpi_checksum(const uint8_t *data, int len)
-{
- int sum, i;
- sum = 0;
- for(i = 0; i < len; i++)
- sum += data[i];
- return (-sum) & 0xff;
-}
-
-int acpi_table_add(const char *t)
-{
- static const char *dfl_id = "QEMUQEMU";
- char buf[1024], *p, *f;
- struct acpi_table_header acpi_hdr;
- unsigned long val;
- size_t off;
-
- memset(&acpi_hdr, 0, sizeof(acpi_hdr));
-
- if (get_param_value(buf, sizeof(buf), "sig", t)) {
- strncpy(acpi_hdr.signature, buf, 4);
- } else {
- strncpy(acpi_hdr.signature, dfl_id, 4);
- }
- if (get_param_value(buf, sizeof(buf), "rev", t)) {
- val = strtoul(buf, &p, 10);
- if (val > 255 || *p != '\0')
- goto out;
- } else {
- val = 1;
- }
- acpi_hdr.revision = (int8_t)val;
-
- if (get_param_value(buf, sizeof(buf), "oem_id", t)) {
- strncpy(acpi_hdr.oem_id, buf, 6);
- } else {
- strncpy(acpi_hdr.oem_id, dfl_id, 6);
- }
-
- if (get_param_value(buf, sizeof(buf), "oem_table_id", t)) {
- strncpy(acpi_hdr.oem_table_id, buf, 8);
- } else {
- strncpy(acpi_hdr.oem_table_id, dfl_id, 8);
- }
-
- if (get_param_value(buf, sizeof(buf), "oem_rev", t)) {
- val = strtol(buf, &p, 10);
- if(*p != '\0')
- goto out;
- } else {
- val = 1;
- }
- acpi_hdr.oem_revision = cpu_to_le32(val);
-
- if (get_param_value(buf, sizeof(buf), "asl_compiler_id", t)) {
- strncpy(acpi_hdr.asl_compiler_id, buf, 4);
- } else {
- strncpy(acpi_hdr.asl_compiler_id, dfl_id, 4);
- }
-
- if (get_param_value(buf, sizeof(buf), "asl_compiler_rev", t)) {
- val = strtol(buf, &p, 10);
- if(*p != '\0')
- goto out;
- } else {
- val = 1;
- }
- acpi_hdr.asl_compiler_revision = cpu_to_le32(val);
-
- if (!get_param_value(buf, sizeof(buf), "data", t)) {
- buf[0] = '\0';
- }
-
- acpi_hdr.length = sizeof(acpi_hdr);
-
- f = buf;
- while (buf[0]) {
- struct stat s;
- char *n = strchr(f, ':');
- if (n)
- *n = '\0';
- if(stat(f, &s) < 0) {
- fprintf(stderr, "Can't stat file '%s': %s\n", f, strerror(errno));
- goto out;
- }
- acpi_hdr.length += s.st_size;
- if (!n)
- break;
- *n = ':';
- f = n + 1;
- }
-
- if (!acpi_tables) {
- acpi_tables_len = sizeof(uint16_t);
- acpi_tables = qemu_mallocz(acpi_tables_len);
- }
- p = acpi_tables + acpi_tables_len;
- acpi_tables_len += sizeof(uint16_t) + acpi_hdr.length;
- acpi_tables = qemu_realloc(acpi_tables, acpi_tables_len);
-
- acpi_hdr.length = cpu_to_le32(acpi_hdr.length);
- *(uint16_t*)p = acpi_hdr.length;
- p += sizeof(uint16_t);
- memcpy(p, &acpi_hdr, sizeof(acpi_hdr));
- off = sizeof(acpi_hdr);
-
- f = buf;
- while (buf[0]) {
- struct stat s;
- int fd;
- char *n = strchr(f, ':');
- if (n)
- *n = '\0';
- fd = open(f, O_RDONLY);
-
- if(fd < 0)
- goto out;
- if(fstat(fd, &s) < 0) {
- close(fd);
- goto out;
- }
-
- do {
- int r;
- r = read(fd, p + off, s.st_size);
- if (r > 0) {
- off += r;
- s.st_size -= r;
- } else if ((r < 0 && errno != EINTR) || r == 0) {
- close(fd);
- goto out;
- }
- } while(s.st_size);
-
- close(fd);
- if (!n)
- break;
- f = n + 1;
- }
-
- ((struct acpi_table_header*)p)->checksum = acpi_checksum((uint8_t*)p, off);
- /* increase number of tables */
- (*(uint16_t*)acpi_tables) =
- cpu_to_le32(le32_to_cpu(*(uint16_t*)acpi_tables) + 1);
- return 0;
-out:
- if (acpi_tables) {
- qemu_free(acpi_tables);
- acpi_tables = NULL;
- }
- return -1;
-}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 05/26] pc: initialize ioapic before use.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (3 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 04/26] acpi: split acpi.c into the common part and the piix4 part Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 06/26] pc, i440fx: Make smm enable/disable function i440fx independent Isaku Yamahata
` (21 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
The changeset of 2c8d9340203c7f19265fd4cb2341f568217a3af6
prevents isa_irq_handler() from NULL refering of IsaIrqState::ioapic.
However it would be better to initialize the member before reference.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index db2b9a2..8842766 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -921,6 +921,9 @@ static void pc_init1(ram_addr_t ram_size,
i8259 = i8259_init(cpu_irq[0]);
isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
isa_irq_state->i8259 = i8259;
+ if (pci_enabled) {
+ isa_irq_state->ioapic = ioapic_init();
+ }
isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
if (pci_enabled) {
@@ -964,9 +967,6 @@ static void pc_init1(ram_addr_t ram_size,
register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
- if (pci_enabled) {
- isa_irq_state->ioapic = ioapic_init();
- }
pit = pit_init(0x40, isa_reserve_irq(0));
pcspk_init(pit);
if (!no_hpet) {
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 06/26] pc, i440fx: Make smm enable/disable function i440fx independent.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (4 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 05/26] pc: initialize ioapic before use Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 07/26] pc: make an unnecessary global variable, pit, local Isaku Yamahata
` (20 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
make cpu_smm_update() generic to be independent on i440fx by
registering a callback.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 18 +++++++++++++++---
hw/pc.h | 4 +++-
hw/piix_pci.c | 5 ++++-
3 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 8842766..691803f 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -68,7 +68,6 @@
static FDCtrl *floppy_controller;
static RTCState *rtc_state;
static PITState *pit;
-static PCII440FXState *i440fx_state;
#define E820_NR_ENTRIES 16
@@ -125,10 +124,22 @@ uint64_t cpu_get_tsc(CPUX86State *env)
}
/* SMM support */
+
+static cpu_set_smm_t smm_set;
+static void *smm_arg;
+
+void cpu_smm_register(cpu_set_smm_t callback, void *arg)
+{
+ assert(smm_set == NULL);
+ assert(smm_arg == NULL);
+ smm_set = callback;
+ smm_arg = arg;
+}
+
void cpu_smm_update(CPUState *env)
{
- if (i440fx_state && env == first_cpu)
- i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
+ if (smm_set && smm_arg && env == first_cpu)
+ smm_set(!!(env->hflags & HF_SMM_MASK), smm_arg);
}
@@ -813,6 +824,7 @@ static void pc_init1(ram_addr_t ram_size,
ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
int bios_size, isa_bios_size;
PCIBus *pci_bus;
+ PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *cpu_irq;
qemu_irq *isa_irq;
diff --git a/hw/pc.h b/hw/pc.h
index d11a576..77239a0 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -80,6 +80,9 @@ extern int fd_bootchk;
void ioport_set_a20(int enable);
int ioport_get_a20(void);
+typedef void (*cpu_set_smm_t)(int smm, void *arg);
+void cpu_smm_register(cpu_set_smm_t callback, void *arg);
+
/* acpi.c */
extern int acpi_enabled;
extern char *acpi_tables;
@@ -108,7 +111,6 @@ struct PCII440FXState;
typedef struct PCII440FXState PCII440FXState;
PCIBus *i440fx_init(PCII440FXState **pi440fx_state, int *piix_devfn, qemu_irq *pic, int ram_size);
-void i440fx_set_smm(PCII440FXState *d, int val);
void i440fx_init_memory_mappings(PCII440FXState *d);
/* piix4.c */
diff --git a/hw/piix_pci.c b/hw/piix_pci.c
index 97519db..aff7f6d 100644
--- a/hw/piix_pci.c
+++ b/hw/piix_pci.c
@@ -114,8 +114,10 @@ static void i440fx_update_memory_mappings(PCII440FXState *d)
}
}
-void i440fx_set_smm(PCII440FXState *d, int val)
+static void i440fx_set_smm(int val, void *arg)
{
+ PCII440FXState *d = arg;
+
val = (val != 0);
if (d->smm_enabled != val) {
d->smm_enabled = val;
@@ -210,6 +212,7 @@ static int i440fx_initfn(PCIDevice *dev)
d->dev.config[I440FX_SMRAM] = 0x02;
+ cpu_smm_register(&i440fx_set_smm, d);
return 0;
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 07/26] pc: make an unnecessary global variable, pit, local.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (5 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 06/26] pc, i440fx: Make smm enable/disable function i440fx independent Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 08/26] pc: remove a global variable, floppy_controller Isaku Yamahata
` (19 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
remove unnecessary global static variables, pit.
Make it local.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 691803f..b23684e 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -67,7 +67,6 @@
static FDCtrl *floppy_controller;
static RTCState *rtc_state;
-static PITState *pit;
#define E820_NR_ENTRIES 16
@@ -835,6 +834,7 @@ static void pc_init1(ram_addr_t ram_size,
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DriveInfo *fd[MAX_FD];
void *fw_cfg;
+ PITState *pit;
if (ram_size >= 0xe0000000 ) {
above_4g_mem_size = ram_size - 0xe0000000;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 08/26] pc: remove a global variable, floppy_controller.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (6 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 07/26] pc: make an unnecessary global variable, pit, local Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 09/26] pc: remove global variable rtc_state by using qemu_irq Isaku Yamahata
` (18 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Remove a global variable, floppy_controller.
Since it is unnecessarily global, make it local and pass it as
a function argument.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 8 +++++---
1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index b23684e..3b6da4a 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -65,7 +65,6 @@
#define MAX_IDE_BUS 2
-static FDCtrl *floppy_controller;
static RTCState *rtc_state;
#define E820_NR_ENTRIES 16
@@ -273,7 +272,8 @@ static int pc_boot_set(void *opaque, const char *boot_device)
/* hd_table must contain 4 block drivers */
static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
- const char *boot_device, DriveInfo **hd_table)
+ const char *boot_device, DriveInfo **hd_table,
+ FDCtrl *floppy_controller)
{
RTCState *s = rtc_state;
int val;
@@ -834,6 +834,7 @@ static void pc_init1(ram_addr_t ram_size,
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DriveInfo *fd[MAX_FD];
void *fw_cfg;
+ FDCtrl *floppy_controller;
PITState *pit;
if (ram_size >= 0xe0000000 ) {
@@ -1035,7 +1036,8 @@ static void pc_init1(ram_addr_t ram_size,
}
floppy_controller = fdctrl_init_isa(fd);
- cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
+ cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
+ floppy_controller);
if (pci_enabled && usb_enabled) {
usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 09/26] pc: remove global variable rtc_state by using qemu_irq.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (7 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 08/26] pc: remove a global variable, floppy_controller Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 10/26] pc: introduce a function to allocate cpu irq Isaku Yamahata
` (17 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, Paolo Bonzini, kraxel
Remove the reference to the global variable, rtc_state, by passing
function argument to cmos_init_hd(), cmos_init().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Paolo Bonzini <bonzini@gnu.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
---
Changes v12 -> v13
Blue already converted the CMOS S3 to use qemu_irq by
the change set of 53b67b3052f39b049bc7c79ae1ce132c90098c6c.
So the patch is simplified.
---
hw/pc.c | 16 +++++++---------
1 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 3b6da4a..c88158c 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -65,8 +65,6 @@
#define MAX_IDE_BUS 2
-static RTCState *rtc_state;
-
#define E820_NR_ENTRIES 16
struct e820_entry {
@@ -207,9 +205,9 @@ static int cmos_get_fd_drive_type(int fd0)
return val;
}
-static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
+static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd,
+ RTCState *s)
{
- RTCState *s = rtc_state;
int cylinders, heads, sectors;
bdrv_get_geometry_hint(hd, &cylinders, &heads, §ors);
rtc_set_memory(s, type_ofs, 47);
@@ -273,9 +271,8 @@ static int pc_boot_set(void *opaque, const char *boot_device)
/* hd_table must contain 4 block drivers */
static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
const char *boot_device, DriveInfo **hd_table,
- FDCtrl *floppy_controller)
+ FDCtrl *floppy_controller, RTCState *s)
{
- RTCState *s = rtc_state;
int val;
int fd0, fd1, nb;
int i;
@@ -350,9 +347,9 @@ static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
if (hd_table[0])
- cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
+ cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv, s);
if (hd_table[1])
- cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
+ cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv, s);
val = 0;
for (i = 0; i < 4; i++) {
@@ -835,6 +832,7 @@ static void pc_init1(ram_addr_t ram_size,
DriveInfo *fd[MAX_FD];
void *fw_cfg;
FDCtrl *floppy_controller;
+ RTCState *rtc_state;
PITState *pit;
if (ram_size >= 0xe0000000 ) {
@@ -1037,7 +1035,7 @@ static void pc_init1(ram_addr_t ram_size,
floppy_controller = fdctrl_init_isa(fd);
cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
- floppy_controller);
+ floppy_controller, rtc_state);
if (pci_enabled && usb_enabled) {
usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 10/26] pc: introduce a function to allocate cpu irq.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (8 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 09/26] pc: remove global variable rtc_state by using qemu_irq Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 11/26] pc: make pc_init1() not refer ferr_irq directly Isaku Yamahata
` (16 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Introduce a function, pc_allocate_cpu_irq(), to allocate cpu irq
in order to make pic_irq_request() piix independent.
Later piix code will be split out to another file keeping pic_irq_request()
static.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index c88158c..fa11477 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -805,6 +805,11 @@ static CPUState *pc_new_cpu(const char *cpu_model)
return env;
}
+static qemu_irq *pc_allocate_cpu_irq(void)
+{
+ return qemu_allocate_irqs(pic_irq_request, NULL, 1);
+}
+
/* PC hardware initialisation */
static void pc_init1(ram_addr_t ram_size,
const char *boot_device,
@@ -928,7 +933,7 @@ static void pc_init1(ram_addr_t ram_size,
rom_add_option(option_rom[i]);
}
- cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
+ cpu_irq = pc_allocate_cpu_irq();
i8259 = i8259_init(cpu_irq[0]);
isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
isa_irq_state->i8259 = i8259;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 11/26] pc: make pc_init1() not refer ferr_irq directly.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (9 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 10/26] pc: introduce a function to allocate cpu irq Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 12/26] pc: split out cpu initialization from pc_init1() into pc_cpus_init() Isaku Yamahata
` (15 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
By introducing a registering function, make pc_init1() not refer to
ferr_irq directly in order to make ferr_irq piix independent.
Later pc_init1() will be split out into another file keeping ferr_irq
static.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 8 +++++++-
hw/pc.h | 2 ++
2 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index fa11477..18c025b 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -102,6 +102,12 @@ static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
/* MSDOS compatibility mode FPU exception support */
static qemu_irq ferr_irq;
+
+void pc_register_ferr_irq(qemu_irq irq)
+{
+ ferr_irq = irq;
+}
+
/* XXX: add IGNNE support */
void cpu_set_ferr(CPUX86State *s)
{
@@ -950,7 +956,7 @@ static void pc_init1(ram_addr_t ram_size,
}
isa_bus_irqs(isa_irq);
- ferr_irq = isa_reserve_irq(13);
+ pc_register_ferr_irq(isa_reserve_irq(13));
/* init basic PC hardware */
register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
diff --git a/hw/pc.h b/hw/pc.h
index 77239a0..abf02de 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -77,6 +77,8 @@ void rtc_set_date(RTCState *s, const struct tm *tm);
/* pc.c */
extern int fd_bootchk;
+void pc_register_ferr_irq(qemu_irq irq);
+
void ioport_set_a20(int enable);
int ioport_get_a20(void);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 12/26] pc: split out cpu initialization from pc_init1() into pc_cpus_init().
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (10 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 11/26] pc: make pc_init1() not refer ferr_irq directly Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 13/26] pc: split out memory allocation from pc_init1() into pc_memory_init() Isaku Yamahata
` (14 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
split out cpu initialization which is piix independent from pc_init1()
into pc_cpus_init(). Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 31 +++++++++++++++++++------------
1 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 18c025b..9f720df 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -811,6 +811,24 @@ static CPUState *pc_new_cpu(const char *cpu_model)
return env;
}
+static void pc_cpus_init(const char *cpu_model)
+{
+ int i;
+
+ /* init CPUs */
+ if (cpu_model == NULL) {
+#ifdef TARGET_X86_64
+ cpu_model = "qemu64";
+#else
+ cpu_model = "qemu32";
+#endif
+ }
+
+ for(i = 0; i < smp_cpus; i++) {
+ pc_new_cpu(cpu_model);
+ }
+}
+
static qemu_irq *pc_allocate_cpu_irq(void)
{
return qemu_allocate_irqs(pic_irq_request, NULL, 1);
@@ -855,18 +873,7 @@ static void pc_init1(ram_addr_t ram_size,
linux_boot = (kernel_filename != NULL);
- /* init CPUs */
- if (cpu_model == NULL) {
-#ifdef TARGET_X86_64
- cpu_model = "qemu64";
-#else
- cpu_model = "qemu32";
-#endif
- }
-
- for (i = 0; i < smp_cpus; i++) {
- pc_new_cpu(cpu_model);
- }
+ pc_cpus_init(cpu_model);
vmport_init();
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 13/26] pc: split out memory allocation from pc_init1() into pc_memory_init()
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (11 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 12/26] pc: split out cpu initialization from pc_init1() into pc_cpus_init() Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 14/26] pc: split out vga initialization from pc_init1() into pc_vga_init() Isaku Yamahata
` (13 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Split out memory allocation and rom/bios loading which doesn't depend
on piix from pc_init1() into pc_memory_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 73 ++++++++++++++++++++++++++++++++++++++------------------------
1 files changed, 45 insertions(+), 28 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 9f720df..2e37c63 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -834,35 +834,19 @@ static qemu_irq *pc_allocate_cpu_irq(void)
return qemu_allocate_irqs(pic_irq_request, NULL, 1);
}
-/* PC hardware initialisation */
-static void pc_init1(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model,
- int pci_enabled)
+static void pc_memory_init(ram_addr_t ram_size,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ ram_addr_t *below_4g_mem_size_p,
+ ram_addr_t *above_4g_mem_size_p)
{
char *filename;
int ret, linux_boot, i;
ram_addr_t ram_addr, bios_offset, option_rom_offset;
ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
int bios_size, isa_bios_size;
- PCIBus *pci_bus;
- PCII440FXState *i440fx_state;
- int piix3_devfn = -1;
- qemu_irq *cpu_irq;
- qemu_irq *isa_irq;
- qemu_irq *i8259;
- qemu_irq *cmos_s3;
- qemu_irq *smi_irq;
- IsaIrqState *isa_irq_state;
- DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
- DriveInfo *fd[MAX_FD];
- void *fw_cfg;
- FDCtrl *floppy_controller;
- RTCState *rtc_state;
- PITState *pit;
+ void **fw_cfg;
if (ram_size >= 0xe0000000 ) {
above_4g_mem_size = ram_size - 0xe0000000;
@@ -870,13 +854,11 @@ static void pc_init1(ram_addr_t ram_size,
} else {
below_4g_mem_size = ram_size;
}
+ *above_4g_mem_size_p = above_4g_mem_size;
+ *below_4g_mem_size_p = below_4g_mem_size;
linux_boot = (kernel_filename != NULL);
- pc_cpus_init(cpu_model);
-
- vmport_init();
-
/* allocate RAM */
ram_addr = qemu_ram_alloc(below_4g_mem_size);
cpu_register_physical_memory(0, 0xa0000, ram_addr);
@@ -939,12 +921,47 @@ static void pc_init1(ram_addr_t ram_size,
rom_set_fw(fw_cfg);
if (linux_boot) {
- load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
+ load_linux(*fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
}
for (i = 0; i < nb_option_roms; i++) {
rom_add_option(option_rom[i]);
}
+}
+
+/* PC hardware initialisation */
+static void pc_init1(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model,
+ int pci_enabled)
+{
+ int i;
+ ram_addr_t below_4g_mem_size, above_4g_mem_size;
+ PCIBus *pci_bus;
+ PCII440FXState *i440fx_state;
+ int piix3_devfn = -1;
+ qemu_irq *cpu_irq;
+ qemu_irq *isa_irq;
+ qemu_irq *i8259;
+ qemu_irq *cmos_s3;
+ qemu_irq *smi_irq;
+ IsaIrqState *isa_irq_state;
+ DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+ DriveInfo *fd[MAX_FD];
+ FDCtrl *floppy_controller;
+ RTCState *rtc_state;
+ PITState *pit;
+
+ pc_cpus_init(cpu_model);
+
+ vmport_init();
+
+ /* allocate ram and load rom/bios */
+ pc_memory_init(ram_size, kernel_filename, kernel_cmdline, initrd_filename,
+ &below_4g_mem_size, &above_4g_mem_size);
cpu_irq = pc_allocate_cpu_irq();
i8259 = i8259_init(cpu_irq[0]);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 14/26] pc: split out vga initialization from pc_init1() into pc_vga_init().
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (12 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 13/26] pc: split out memory allocation from pc_init1() into pc_memory_init() Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 15/26] pc: split out basic device init from pc_init1() into pc_basic_device_init() Isaku Yamahata
` (12 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Split out vga initialization which is independent of piix
from pc_init1() as pc_vga_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 41 +++++++++++++++++++++++------------------
1 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 2e37c63..53df13d 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -929,6 +929,28 @@ static void pc_memory_init(ram_addr_t ram_size,
}
}
+static void pc_vga_init(PCIBus *pci_bus)
+{
+ if (cirrus_vga_enabled) {
+ if (pci_bus) {
+ pci_cirrus_vga_init(pci_bus);
+ } else {
+ isa_cirrus_vga_init();
+ }
+ } else if (vmsvga_enabled) {
+ if (pci_bus)
+ pci_vmsvga_init(pci_bus);
+ else
+ fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
+ } else if (std_vga_enabled) {
+ if (pci_bus) {
+ pci_vga_init(pci_bus, 0, 0);
+ } else {
+ isa_vga_init();
+ }
+ }
+}
+
/* PC hardware initialisation */
static void pc_init1(ram_addr_t ram_size,
const char *boot_device,
@@ -987,24 +1009,7 @@ static void pc_init1(ram_addr_t ram_size,
register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
- if (cirrus_vga_enabled) {
- if (pci_enabled) {
- pci_cirrus_vga_init(pci_bus);
- } else {
- isa_cirrus_vga_init();
- }
- } else if (vmsvga_enabled) {
- if (pci_enabled)
- pci_vmsvga_init(pci_bus);
- else
- fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
- } else if (std_vga_enabled) {
- if (pci_enabled) {
- pci_vga_init(pci_bus, 0, 0);
- } else {
- isa_vga_init();
- }
- }
+ pc_vga_init(pci_enabled? pci_bus: NULL);
rtc_state = rtc_init(2000);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 15/26] pc: split out basic device init from pc_init1() into pc_basic_device_init()
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (13 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 14/26] pc: split out vga initialization from pc_init1() into pc_vga_init() Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 16/26] pc: split out pci device init from pc_init1() into pc_pci_device_init() Isaku Yamahata
` (11 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Split out basic device, i.e. legacy devices like floppy, initialization
from pc_init1() into pc_basic_device_init().
Later it will be used.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 86 +++++++++++++++++++++++++++++++++++---------------------------
1 files changed, 48 insertions(+), 38 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 53df13d..d820a51 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -951,6 +951,52 @@ static void pc_vga_init(PCIBus *pci_bus)
}
}
+static void pc_basic_device_init(qemu_irq *isa_irq,
+ FDCtrl **floppy_controller,
+ RTCState **rtc_state)
+{
+ int i;
+ DriveInfo *fd[MAX_FD];
+ PITState *pit;
+
+ register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
+
+ register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
+
+ *rtc_state = rtc_init(2000);
+
+ qemu_register_boot_set(pc_boot_set, *rtc_state);
+
+ register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
+ register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
+
+ pit = pit_init(0x40, isa_reserve_irq(0));
+ pcspk_init(pit);
+ if (!no_hpet) {
+ hpet_init(isa_irq);
+ }
+
+ for(i = 0; i < MAX_SERIAL_PORTS; i++) {
+ if (serial_hds[i]) {
+ serial_isa_init(i, serial_hds[i]);
+ }
+ }
+
+ for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
+ if (parallel_hds[i]) {
+ parallel_init(i, parallel_hds[i]);
+ }
+ }
+
+ isa_create_simple("i8042");
+ DMA_init(0);
+
+ for(i = 0; i < MAX_FD; i++) {
+ fd[i] = drive_get(IF_FLOPPY, 0, i);
+ }
+ *floppy_controller = fdctrl_init_isa(fd);
+}
+
/* PC hardware initialisation */
static void pc_init1(ram_addr_t ram_size,
const char *boot_device,
@@ -972,10 +1018,8 @@ static void pc_init1(ram_addr_t ram_size,
qemu_irq *smi_irq;
IsaIrqState *isa_irq_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
- DriveInfo *fd[MAX_FD];
FDCtrl *floppy_controller;
RTCState *rtc_state;
- PITState *pit;
pc_cpus_init(cpu_model);
@@ -1004,37 +1048,10 @@ static void pc_init1(ram_addr_t ram_size,
pc_register_ferr_irq(isa_reserve_irq(13));
- /* init basic PC hardware */
- register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
-
- register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
-
pc_vga_init(pci_enabled? pci_bus: NULL);
- rtc_state = rtc_init(2000);
-
- qemu_register_boot_set(pc_boot_set, rtc_state);
-
- register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
- register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
-
- pit = pit_init(0x40, isa_reserve_irq(0));
- pcspk_init(pit);
- if (!no_hpet) {
- hpet_init(isa_irq);
- }
-
- for(i = 0; i < MAX_SERIAL_PORTS; i++) {
- if (serial_hds[i]) {
- serial_isa_init(i, serial_hds[i]);
- }
- }
-
- for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
- if (parallel_hds[i]) {
- parallel_init(i, parallel_hds[i]);
- }
- }
+ /* init basic PC hardware */
+ pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
for(i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
@@ -1063,17 +1080,10 @@ static void pc_init1(ram_addr_t ram_size,
}
}
- isa_create_simple("i8042");
- DMA_init(0);
#ifdef HAS_AUDIO
audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
#endif
- for(i = 0; i < MAX_FD; i++) {
- fd[i] = drive_get(IF_FLOPPY, 0, i);
- }
- floppy_controller = fdctrl_init_isa(fd);
-
cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
floppy_controller, rtc_state);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 16/26] pc: split out pci device init from pc_init1() into pc_pci_device_init()
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (14 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 15/26] pc: split out basic device init from pc_init1() into pc_basic_device_init() Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 17/26] pc: split out piix specific part from pc.c into pc_piix.c Isaku Yamahata
` (10 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Split out pci device initialization from pc_init1() into pc_pci_device_init().
and removed unnecessary braces.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pc.c | 19 ++++++++++++-------
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index d820a51..5c8a11b 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -997,6 +997,17 @@ static void pc_basic_device_init(qemu_irq *isa_irq,
*floppy_controller = fdctrl_init_isa(fd);
}
+static void pc_pci_device_init(PCIBus *pci_bus)
+{
+ int max_bus;
+ int bus;
+
+ max_bus = drive_get_max_bus(IF_SCSI);
+ for (bus = 0; bus <= max_bus; bus++) {
+ pci_create_simple(pci_bus, -1, "lsi53c895a");
+ }
+}
+
/* PC hardware initialisation */
static void pc_init1(ram_addr_t ram_size,
const char *boot_device,
@@ -1116,13 +1127,7 @@ static void pc_init1(ram_addr_t ram_size,
}
if (pci_enabled) {
- int max_bus;
- int bus;
-
- max_bus = drive_get_max_bus(IF_SCSI);
- for (bus = 0; bus <= max_bus; bus++) {
- pci_create_simple(pci_bus, -1, "lsi53c895a");
- }
+ pc_pci_device_init(pci_bus);
}
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 17/26] pc: split out piix specific part from pc.c into pc_piix.c
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (15 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 16/26] pc: split out pci device init from pc_init1() into pc_pci_device_init() Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 18/26] pc: move rtc declarations from pc.h into a dedicated header file Isaku Yamahata
` (9 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
Makefile.target | 2 +-
hw/fdc.h | 5 +
hw/pc.c | 351 ++++---------------------------------------------------
hw/pc.h | 33 +++++
hw/pc_piix.c | 317 +++++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 381 insertions(+), 327 deletions(-)
create mode 100644 hw/pc_piix.c
diff --git a/Makefile.target b/Makefile.target
index 9d44660..a5c6b8d 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -195,7 +195,7 @@ obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmmouse.o vmport.o hpet.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pm_smbus.o apm.o acpi_piix4.o
+obj-i386-y += pm_smbus.o apm.o acpi_piix4.o pc_piix.o
# shared objects
obj-ppc-y = ppc.o
diff --git a/hw/fdc.h b/hw/fdc.h
index d173902..c48b5e0 100644
--- a/hw/fdc.h
+++ b/hw/fdc.h
@@ -1,3 +1,6 @@
+#ifndef HW_FDC_H
+#define HW_FDC_H
+
/* fdc.c */
#include "sysemu.h"
#define MAX_FD 2
@@ -10,3 +13,5 @@ FDCtrl *fdctrl_init_sysbus(qemu_irq irq, int dma_chann,
FDCtrl *sun4m_fdctrl_init(qemu_irq irq, target_phys_addr_t io_base,
DriveInfo **fds, qemu_irq *fdc_tc);
int fdctrl_get_drive_type(FDCtrl *fdctrl, int drive_num);
+
+#endif
diff --git a/hw/pc.c b/hw/pc.c
index 5c8a11b..4f65049 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -27,26 +27,13 @@
#include "fdc.h"
#include "pci.h"
#include "vmware_vga.h"
-#include "usb-uhci.h"
-#include "usb-ohci.h"
-#include "prep_pci.h"
-#include "apb_pci.h"
-#include "block.h"
-#include "sysemu.h"
-#include "audio/audio.h"
-#include "net.h"
-#include "smbus.h"
-#include "boards.h"
#include "monitor.h"
#include "fw_cfg.h"
#include "hpet_emul.h"
-#include "watchdog.h"
#include "smbios.h"
-#include "ide.h"
#include "loader.h"
#include "elf.h"
#include "multiboot.h"
-#include "kvm.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@@ -63,8 +50,6 @@
#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
#define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)
-#define MAX_IDE_BUS 2
-
#define E820_NR_ENTRIES 16
struct e820_entry {
@@ -80,12 +65,7 @@ struct e820_table {
static struct e820_table e820_table;
-typedef struct isa_irq_state {
- qemu_irq *i8259;
- qemu_irq *ioapic;
-} IsaIrqState;
-
-static void isa_irq_handler(void *opaque, int n, int level)
+void isa_irq_handler(void *opaque, int n, int level)
{
IsaIrqState *isa = (IsaIrqState *)opaque;
@@ -275,9 +255,9 @@ static int pc_boot_set(void *opaque, const char *boot_device)
}
/* hd_table must contain 4 block drivers */
-static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
- const char *boot_device, DriveInfo **hd_table,
- FDCtrl *floppy_controller, RTCState *s)
+void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
+ const char *boot_device, DriveInfo **hd_table,
+ FDCtrl *floppy_controller, RTCState *s)
{
int val;
int fd0, fd1, nb;
@@ -723,10 +703,6 @@ static void load_linux(void *fw_cfg,
nb_option_roms++;
}
-static const int ide_iobase[2] = { 0x1f0, 0x170 };
-static const int ide_iobase2[2] = { 0x3f6, 0x376 };
-static const int ide_irq[2] = { 14, 15 };
-
#define NE2000_NB_MAX 6
static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
@@ -737,7 +713,7 @@ static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
#ifdef HAS_AUDIO
-static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
+void pc_audio_init (PCIBus *pci_bus, qemu_irq *pic)
{
struct soundhw *c;
@@ -755,7 +731,7 @@ static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
}
#endif
-static void pc_init_ne2k_isa(NICInfo *nd)
+void pc_init_ne2k_isa(NICInfo *nd)
{
static int nb_ne2k = 0;
@@ -774,7 +750,7 @@ int cpu_is_bsp(CPUState *env)
/* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
BIOS will read it and start S3 resume at POST Entry */
-static void cmos_set_s3_resume(void *opaque, int irq, int level)
+void pc_cmos_set_s3_resume(void *opaque, int irq, int level)
{
RTCState *s = opaque;
@@ -783,7 +759,7 @@ static void cmos_set_s3_resume(void *opaque, int irq, int level)
}
}
-static void acpi_smi_interrupt(void *opaque, int irq, int level)
+void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
{
CPUState *s = opaque;
@@ -811,7 +787,7 @@ static CPUState *pc_new_cpu(const char *cpu_model)
return env;
}
-static void pc_cpus_init(const char *cpu_model)
+void pc_cpus_init(const char *cpu_model)
{
int i;
@@ -829,17 +805,12 @@ static void pc_cpus_init(const char *cpu_model)
}
}
-static qemu_irq *pc_allocate_cpu_irq(void)
-{
- return qemu_allocate_irqs(pic_irq_request, NULL, 1);
-}
-
-static void pc_memory_init(ram_addr_t ram_size,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- ram_addr_t *below_4g_mem_size_p,
- ram_addr_t *above_4g_mem_size_p)
+void pc_memory_init(ram_addr_t ram_size,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ ram_addr_t *below_4g_mem_size_p,
+ ram_addr_t *above_4g_mem_size_p)
{
char *filename;
int ret, linux_boot, i;
@@ -929,7 +900,12 @@ static void pc_memory_init(ram_addr_t ram_size,
}
}
-static void pc_vga_init(PCIBus *pci_bus)
+qemu_irq *pc_allocate_cpu_irq(void)
+{
+ return qemu_allocate_irqs(pic_irq_request, NULL, 1);
+}
+
+void pc_vga_init(PCIBus *pci_bus)
{
if (cirrus_vga_enabled) {
if (pci_bus) {
@@ -951,9 +927,9 @@ static void pc_vga_init(PCIBus *pci_bus)
}
}
-static void pc_basic_device_init(qemu_irq *isa_irq,
- FDCtrl **floppy_controller,
- RTCState **rtc_state)
+void pc_basic_device_init(qemu_irq *isa_irq,
+ FDCtrl **floppy_controller,
+ RTCState **rtc_state)
{
int i;
DriveInfo *fd[MAX_FD];
@@ -997,7 +973,7 @@ static void pc_basic_device_init(qemu_irq *isa_irq,
*floppy_controller = fdctrl_init_isa(fd);
}
-static void pc_pci_device_init(PCIBus *pci_bus)
+void pc_pci_device_init(PCIBus *pci_bus)
{
int max_bus;
int bus;
@@ -1007,280 +983,3 @@ static void pc_pci_device_init(PCIBus *pci_bus)
pci_create_simple(pci_bus, -1, "lsi53c895a");
}
}
-
-/* PC hardware initialisation */
-static void pc_init1(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model,
- int pci_enabled)
-{
- int i;
- ram_addr_t below_4g_mem_size, above_4g_mem_size;
- PCIBus *pci_bus;
- PCII440FXState *i440fx_state;
- int piix3_devfn = -1;
- qemu_irq *cpu_irq;
- qemu_irq *isa_irq;
- qemu_irq *i8259;
- qemu_irq *cmos_s3;
- qemu_irq *smi_irq;
- IsaIrqState *isa_irq_state;
- DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
- FDCtrl *floppy_controller;
- RTCState *rtc_state;
-
- pc_cpus_init(cpu_model);
-
- vmport_init();
-
- /* allocate ram and load rom/bios */
- pc_memory_init(ram_size, kernel_filename, kernel_cmdline, initrd_filename,
- &below_4g_mem_size, &above_4g_mem_size);
-
- cpu_irq = pc_allocate_cpu_irq();
- i8259 = i8259_init(cpu_irq[0]);
- isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
- isa_irq_state->i8259 = i8259;
- if (pci_enabled) {
- isa_irq_state->ioapic = ioapic_init();
- }
- isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
-
- if (pci_enabled) {
- pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq, ram_size);
- } else {
- pci_bus = NULL;
- isa_bus_new(NULL);
- }
- isa_bus_irqs(isa_irq);
-
- pc_register_ferr_irq(isa_reserve_irq(13));
-
- pc_vga_init(pci_enabled? pci_bus: NULL);
-
- /* init basic PC hardware */
- pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
-
- for(i = 0; i < nb_nics; i++) {
- NICInfo *nd = &nd_table[i];
-
- if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
- pc_init_ne2k_isa(nd);
- else
- pci_nic_init_nofail(nd, "e1000", NULL);
- }
-
- if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
- fprintf(stderr, "qemu: too many IDE bus\n");
- exit(1);
- }
-
- for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
- hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
- }
-
- if (pci_enabled) {
- pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
- } else {
- for(i = 0; i < MAX_IDE_BUS; i++) {
- isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
- hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
- }
- }
-
-#ifdef HAS_AUDIO
- audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
-#endif
-
- cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
- floppy_controller, rtc_state);
-
- if (pci_enabled && usb_enabled) {
- usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
- }
-
- if (pci_enabled && acpi_enabled) {
- uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
- i2c_bus *smbus;
-
- cmos_s3 = qemu_allocate_irqs(cmos_set_s3_resume, rtc_state, 1);
- smi_irq = qemu_allocate_irqs(acpi_smi_interrupt, first_cpu, 1);
- /* TODO: Populate SPD eeprom data. */
- smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
- isa_reserve_irq(9), *cmos_s3, *smi_irq,
- kvm_enabled());
- for (i = 0; i < 8; i++) {
- DeviceState *eeprom;
- eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
- qdev_prop_set_uint8(eeprom, "address", 0x50 + i);
- qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
- qdev_init_nofail(eeprom);
- }
- piix4_acpi_system_hot_add_init(pci_bus);
- }
-
- if (i440fx_state) {
- i440fx_init_memory_mappings(i440fx_state);
- }
-
- if (pci_enabled) {
- pc_pci_device_init(pci_bus);
- }
-}
-
-static void pc_init_pci(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- pc_init1(ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model, 1);
-}
-
-static void pc_init_isa(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- if (cpu_model == NULL)
- cpu_model = "486";
- pc_init1(ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model, 0);
-}
-
-static QEMUMachine pc_machine = {
- .name = "pc-0.13",
- .alias = "pc",
- .desc = "Standard PC",
- .init = pc_init_pci,
- .max_cpus = 255,
- .is_default = 1,
-};
-
-static QEMUMachine pc_machine_v0_12 = {
- .name = "pc-0.12",
- .desc = "Standard PC",
- .init = pc_init_pci,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-serial-pci",
- .property = "max_nr_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },
- { /* end of list */ }
- }
-};
-
-static QEMUMachine pc_machine_v0_11 = {
- .name = "pc-0.11",
- .desc = "Standard PC, qemu 0.11",
- .init = pc_init_pci,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_nr_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "ide-drive",
- .property = "ver",
- .value = "0.11",
- },{
- .driver = "scsi-disk",
- .property = "ver",
- .value = "0.11",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },
- { /* end of list */ }
- }
-};
-
-static QEMUMachine pc_machine_v0_10 = {
- .name = "pc-0.10",
- .desc = "Standard PC, qemu 0.10",
- .init = pc_init_pci,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-blk-pci",
- .property = "class",
- .value = stringify(PCI_CLASS_STORAGE_OTHER),
- },{
- .driver = "virtio-serial-pci",
- .property = "class",
- .value = stringify(PCI_CLASS_DISPLAY_OTHER),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_nr_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-net-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "ide-drive",
- .property = "ver",
- .value = "0.10",
- },{
- .driver = "scsi-disk",
- .property = "ver",
- .value = "0.10",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },
- { /* end of list */ }
- },
-};
-
-static QEMUMachine isapc_machine = {
- .name = "isapc",
- .desc = "ISA-only PC",
- .init = pc_init_isa,
- .max_cpus = 1,
-};
-
-static void pc_machine_init(void)
-{
- qemu_register_machine(&pc_machine);
- qemu_register_machine(&pc_machine_v0_12);
- qemu_register_machine(&pc_machine_v0_11);
- qemu_register_machine(&pc_machine_v0_10);
- qemu_register_machine(&isapc_machine);
-}
-
-machine_init(pc_machine_init);
diff --git a/hw/pc.h b/hw/pc.h
index abf02de..8cfec6c 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -3,6 +3,8 @@
#include "qemu-common.h"
#include "ioport.h"
+#include "isa.h"
+#include "fdc.h"
/* PC-style peripherals (also used by other machines). */
@@ -36,6 +38,14 @@ uint32_t pic_intack_read(PicState2 *s);
void pic_info(Monitor *mon);
void irq_info(Monitor *mon);
+/* ISA */
+typedef struct isa_irq_state {
+ qemu_irq *i8259;
+ qemu_irq *ioapic;
+} IsaIrqState;
+
+void isa_irq_handler(void *opaque, int n, int level);
+
/* i8254.c */
#define PIT_FREQ 1193182
@@ -78,6 +88,29 @@ void rtc_set_date(RTCState *s, const struct tm *tm);
extern int fd_bootchk;
void pc_register_ferr_irq(qemu_irq irq);
+void pc_cmos_set_s3_resume(void *opaque, int irq, int level);
+void pc_acpi_smi_interrupt(void *opaque, int irq, int level);
+
+void pc_cpus_init(const char *cpu_model);
+void pc_memory_init(ram_addr_t ram_size,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ ram_addr_t *below_4g_mem_size_p,
+ ram_addr_t *above_4g_mem_size_p);
+qemu_irq *pc_allocate_cpu_irq(void);
+void pc_vga_init(PCIBus *pci_bus);
+void pc_basic_device_init(qemu_irq *isa_irq,
+ FDCtrl **floppy_controller,
+ RTCState **rtc_state);
+void pc_init_ne2k_isa(NICInfo *nd);
+#ifdef HAS_AUDIO
+void pc_audio_init (PCIBus *pci_bus, qemu_irq *pic);
+#endif
+void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
+ const char *boot_device, DriveInfo **hd_table,
+ FDCtrl *floppy_controller, RTCState *s);
+void pc_pci_device_init(PCIBus *pci_bus);
void ioport_set_a20(int enable);
int ioport_get_a20(void);
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
new file mode 100644
index 0000000..52d8591
--- /dev/null
+++ b/hw/pc_piix.c
@@ -0,0 +1,317 @@
+/*
+ * QEMU PC System Emulator
+ *
+ * Copyright (c) 2003-2004 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "apic.h"
+#include "pci.h"
+#include "usb-uhci.h"
+#include "usb-ohci.h"
+#include "net.h"
+#include "boards.h"
+#include "ide.h"
+#include "kvm.h"
+
+#define MAX_IDE_BUS 2
+
+static const int ide_iobase[MAX_IDE_BUS] = { 0x1f0, 0x170 };
+static const int ide_iobase2[MAX_IDE_BUS] = { 0x3f6, 0x376 };
+static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
+
+/* PC hardware initialisation */
+static void pc_init1(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model,
+ int pci_enabled)
+{
+ int i;
+ ram_addr_t below_4g_mem_size, above_4g_mem_size;
+ PCIBus *pci_bus;
+ PCII440FXState *i440fx_state;
+ int piix3_devfn = -1;
+ qemu_irq *cpu_irq;
+ qemu_irq *isa_irq;
+ qemu_irq *i8259;
+ qemu_irq *cmos_s3;
+ qemu_irq *smi_irq;
+ IsaIrqState *isa_irq_state;
+ DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+ FDCtrl *floppy_controller;
+ RTCState *rtc_state;
+
+ pc_cpus_init(cpu_model);
+
+ vmport_init();
+
+ /* allocate ram and load rom/bios */
+ pc_memory_init(ram_size, kernel_filename, kernel_cmdline, initrd_filename,
+ &below_4g_mem_size, &above_4g_mem_size);
+
+ cpu_irq = pc_allocate_cpu_irq();
+ i8259 = i8259_init(cpu_irq[0]);
+ isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
+ isa_irq_state->i8259 = i8259;
+ if (pci_enabled) {
+ isa_irq_state->ioapic = ioapic_init();
+ }
+ isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
+
+ if (pci_enabled) {
+ pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq, ram_size);
+ } else {
+ pci_bus = NULL;
+ isa_bus_new(NULL);
+ }
+ isa_bus_irqs(isa_irq);
+
+ pc_register_ferr_irq(isa_reserve_irq(13));
+
+ pc_vga_init(pci_enabled? pci_bus: NULL);
+
+ /* init basic PC hardware */
+ pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
+
+ for(i = 0; i < nb_nics; i++) {
+ NICInfo *nd = &nd_table[i];
+
+ if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
+ pc_init_ne2k_isa(nd);
+ else
+ pci_nic_init_nofail(nd, "e1000", NULL);
+ }
+
+ if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
+ fprintf(stderr, "qemu: too many IDE bus\n");
+ exit(1);
+ }
+
+ for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
+ hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
+ }
+
+ if (pci_enabled) {
+ pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+ } else {
+ for(i = 0; i < MAX_IDE_BUS; i++) {
+ isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
+ hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+ }
+ }
+
+#ifdef HAS_AUDIO
+ pc_audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
+#endif
+
+ pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
+ floppy_controller, rtc_state);
+
+ if (pci_enabled && usb_enabled) {
+ usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ }
+
+ if (pci_enabled && acpi_enabled) {
+ uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
+ i2c_bus *smbus;
+
+ cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
+ smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
+ /* TODO: Populate SPD eeprom data. */
+ smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
+ isa_reserve_irq(9), *cmos_s3, *smi_irq,
+ kvm_enabled());
+ for (i = 0; i < 8; i++) {
+ DeviceState *eeprom;
+ eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
+ qdev_prop_set_uint8(eeprom, "address", 0x50 + i);
+ qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
+ qdev_init_nofail(eeprom);
+ }
+ piix4_acpi_system_hot_add_init(pci_bus);
+ }
+
+ if (i440fx_state) {
+ i440fx_init_memory_mappings(i440fx_state);
+ }
+
+ if (pci_enabled) {
+ pc_pci_device_init(pci_bus);
+ }
+}
+
+static void pc_init_pci(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ pc_init1(ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, 1);
+}
+
+static void pc_init_isa(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ if (cpu_model == NULL)
+ cpu_model = "486";
+ pc_init1(ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, 0);
+}
+
+static QEMUMachine pc_machine = {
+ .name = "pc-0.13",
+ .alias = "pc",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .is_default = 1,
+};
+
+static QEMUMachine pc_machine_v0_12 = {
+ .name = "pc-0.12",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-serial-pci",
+ .property = "max_nr_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },
+ { /* end of list */ }
+ }
+};
+
+static QEMUMachine pc_machine_v0_11 = {
+ .name = "pc-0.11",
+ .desc = "Standard PC, qemu 0.11",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-blk-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "max_nr_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "ide-drive",
+ .property = "ver",
+ .value = "0.11",
+ },{
+ .driver = "scsi-disk",
+ .property = "ver",
+ .value = "0.11",
+ },{
+ .driver = "PCI",
+ .property = "rombar",
+ .value = stringify(0),
+ },
+ { /* end of list */ }
+ }
+};
+
+static QEMUMachine pc_machine_v0_10 = {
+ .name = "pc-0.10",
+ .desc = "Standard PC, qemu 0.10",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-blk-pci",
+ .property = "class",
+ .value = stringify(PCI_CLASS_STORAGE_OTHER),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "class",
+ .value = stringify(PCI_CLASS_DISPLAY_OTHER),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "max_nr_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-net-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "ide-drive",
+ .property = "ver",
+ .value = "0.10",
+ },{
+ .driver = "scsi-disk",
+ .property = "ver",
+ .value = "0.10",
+ },{
+ .driver = "PCI",
+ .property = "rombar",
+ .value = stringify(0),
+ },
+ { /* end of list */ }
+ },
+};
+
+static QEMUMachine isapc_machine = {
+ .name = "isapc",
+ .desc = "ISA-only PC",
+ .init = pc_init_isa,
+ .max_cpus = 1,
+};
+
+static void pc_machine_init(void)
+{
+ qemu_register_machine(&pc_machine);
+ qemu_register_machine(&pc_machine_v0_12);
+ qemu_register_machine(&pc_machine_v0_11);
+ qemu_register_machine(&pc_machine_v0_10);
+ qemu_register_machine(&isapc_machine);
+}
+
+machine_init(pc_machine_init);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 18/26] pc: move rtc declarations from pc.h into a dedicated header file.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (16 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 17/26] pc: split out piix specific part from pc.c into pc_piix.c Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 19/26] rtc: make rtc_xxx accept/return ISADevice instead of RTCState Isaku Yamahata
` (8 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Move rtc_xxx declarations from pc.h into mc146818rtc.h.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/mc146818rtc.h | 10 ++++++++++
hw/pc.h | 9 +--------
2 files changed, 11 insertions(+), 8 deletions(-)
create mode 100644 hw/mc146818rtc.h
diff --git a/hw/mc146818rtc.h b/hw/mc146818rtc.h
new file mode 100644
index 0000000..7211dae
--- /dev/null
+++ b/hw/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef MC146818RTC_H
+#define MC146818RTC_H
+
+typedef struct RTCState RTCState;
+
+RTCState *rtc_init(int base_year);
+void rtc_set_memory(RTCState *s, int addr, int val);
+void rtc_set_date(RTCState *s, const struct tm *tm);
+
+#endif /* !MC146818RTC_H */
diff --git a/hw/pc.h b/hw/pc.h
index 8cfec6c..e3cc0a5 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -5,6 +5,7 @@
#include "ioport.h"
#include "isa.h"
#include "fdc.h"
+#include "mc146818rtc.h"
/* PC-style peripherals (also used by other machines). */
@@ -76,14 +77,6 @@ void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,
target_phys_addr_t base, ram_addr_t size,
target_phys_addr_t mask);
-/* mc146818rtc.c */
-
-typedef struct RTCState RTCState;
-
-RTCState *rtc_init(int base_year);
-void rtc_set_memory(RTCState *s, int addr, int val);
-void rtc_set_date(RTCState *s, const struct tm *tm);
-
/* pc.c */
extern int fd_bootchk;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 19/26] rtc: make rtc_xxx accept/return ISADevice instead of RTCState.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (17 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 18/26] pc: move rtc declarations from pc.h into a dedicated header file Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 20/26] acpi_piix4: qdevfy Isaku Yamahata
` (7 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/mc146818rtc.c | 26 +++++++++++++++-----------
hw/mc146818rtc.h | 8 ++++----
hw/mips_jazz.c | 1 +
hw/mips_malta.c | 3 ++-
hw/mips_r4k.c | 3 ++-
hw/pc.c | 11 ++++++-----
hw/pc.h | 5 ++---
hw/pc_piix.c | 2 +-
hw/ppc_prep.c | 1 +
9 files changed, 34 insertions(+), 26 deletions(-)
diff --git a/hw/mc146818rtc.c b/hw/mc146818rtc.c
index 89a423e..cd5e0d7 100644
--- a/hw/mc146818rtc.c
+++ b/hw/mc146818rtc.c
@@ -28,6 +28,7 @@
#include "apic.h"
#include "isa.h"
#include "hpet_emul.h"
+#include "mc146818rtc.h"
//#define DEBUG_CMOS
@@ -65,7 +66,7 @@
#define REG_C_PF 0x40
#define REG_C_AF 0x20
-struct RTCState {
+typedef struct RTCState {
ISADevice dev;
uint8_t cmos_data[128];
uint8_t cmos_index;
@@ -85,7 +86,7 @@ struct RTCState {
QEMUTimer *coalesced_timer;
QEMUTimer *second_timer;
QEMUTimer *second_timer2;
-};
+} RTCState;
static void rtc_irq_raise(qemu_irq irq)
{
@@ -492,14 +493,16 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t addr)
}
}
-void rtc_set_memory(RTCState *s, int addr, int val)
+void rtc_set_memory(ISADevice *dev, int addr, int val)
{
+ RTCState *s = DO_UPCAST(RTCState, dev, dev);
if (addr >= 0 && addr <= 127)
s->cmos_data[addr] = val;
}
-void rtc_set_date(RTCState *s, const struct tm *tm)
+void rtc_set_date(ISADevice *dev, const struct tm *tm)
{
+ RTCState *s = DO_UPCAST(RTCState, dev, dev);
s->current_tm = *tm;
rtc_copy_date(s);
}
@@ -508,18 +511,19 @@ void rtc_set_date(RTCState *s, const struct tm *tm)
#define REG_IBM_CENTURY_BYTE 0x32
#define REG_IBM_PS2_CENTURY_BYTE 0x37
-static void rtc_set_date_from_host(RTCState *s)
+static void rtc_set_date_from_host(ISADevice *dev)
{
+ RTCState *s = DO_UPCAST(RTCState, dev, dev);
struct tm tm;
int val;
/* set the CMOS date */
qemu_get_timedate(&tm, 0);
- rtc_set_date(s, &tm);
+ rtc_set_date(dev, &tm);
val = rtc_to_bcd(s, (tm.tm_year / 100) + 19);
- rtc_set_memory(s, REG_IBM_CENTURY_BYTE, val);
- rtc_set_memory(s, REG_IBM_PS2_CENTURY_BYTE, val);
+ rtc_set_memory(dev, REG_IBM_CENTURY_BYTE, val);
+ rtc_set_memory(dev, REG_IBM_PS2_CENTURY_BYTE, val);
}
static int rtc_post_load(void *opaque, int version_id)
@@ -591,7 +595,7 @@ static int rtc_initfn(ISADevice *dev)
s->cmos_data[RTC_REG_C] = 0x00;
s->cmos_data[RTC_REG_D] = 0x80;
- rtc_set_date_from_host(s);
+ rtc_set_date_from_host(dev);
s->periodic_timer = qemu_new_timer(rtc_clock, rtc_periodic_timer, s);
#ifdef TARGET_I386
@@ -614,14 +618,14 @@ static int rtc_initfn(ISADevice *dev)
return 0;
}
-RTCState *rtc_init(int base_year)
+ISADevice *rtc_init(int base_year)
{
ISADevice *dev;
dev = isa_create("mc146818rtc");
qdev_prop_set_int32(&dev->qdev, "base_year", base_year);
qdev_init_nofail(&dev->qdev);
- return DO_UPCAST(RTCState, dev, dev);
+ return dev;
}
static ISADeviceInfo mc146818rtc_info = {
diff --git a/hw/mc146818rtc.h b/hw/mc146818rtc.h
index 7211dae..6f46a68 100644
--- a/hw/mc146818rtc.h
+++ b/hw/mc146818rtc.h
@@ -1,10 +1,10 @@
#ifndef MC146818RTC_H
#define MC146818RTC_H
-typedef struct RTCState RTCState;
+#include "isa.h"
-RTCState *rtc_init(int base_year);
-void rtc_set_memory(RTCState *s, int addr, int val);
-void rtc_set_date(RTCState *s, const struct tm *tm);
+ISADevice *rtc_init(int base_year);
+void rtc_set_memory(ISADevice *dev, int addr, int val);
+void rtc_set_date(ISADevice *dev, const struct tm *tm);
#endif /* !MC146818RTC_H */
diff --git a/hw/mips_jazz.c b/hw/mips_jazz.c
index 5609597..6e0ec8f 100644
--- a/hw/mips_jazz.c
+++ b/hw/mips_jazz.c
@@ -35,6 +35,7 @@
#include "esp.h"
#include "mips-bios.h"
#include "loader.h"
+#include "mc146818rtc.h"
enum jazz_model_e
{
diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index 586c1c3..792709b 100644
--- a/hw/mips_malta.c
+++ b/hw/mips_malta.c
@@ -44,6 +44,7 @@
#include "ide.h"
#include "loader.h"
#include "elf.h"
+#include "mc146818rtc.h"
//#define DEBUG_BOARD_INIT
@@ -776,7 +777,7 @@ void mips_malta_init (ram_addr_t ram_size,
PCIBus *pci_bus;
ISADevice *isa_dev;
CPUState *env;
- RTCState *rtc_state;
+ ISADevice *rtc_state;
FDCtrl *floppy_controller;
MaltaFPGAState *malta_fpga;
qemu_irq *i8259;
diff --git a/hw/mips_r4k.c b/hw/mips_r4k.c
index 0d5e2a6..f1fcfcd 100644
--- a/hw/mips_r4k.c
+++ b/hw/mips_r4k.c
@@ -21,6 +21,7 @@
#include "ide.h"
#include "loader.h"
#include "elf.h"
+#include "mc146818rtc.h"
#define MAX_IDE_BUS 2
@@ -165,7 +166,7 @@ void mips_r4k_init (ram_addr_t ram_size,
int bios_size;
CPUState *env;
ResetData *reset_info;
- RTCState *rtc_state;
+ ISADevice *rtc_state;
int i;
qemu_irq *i8259;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
diff --git a/hw/pc.c b/hw/pc.c
index 4f65049..20dc7fd 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -34,6 +34,7 @@
#include "loader.h"
#include "elf.h"
#include "multiboot.h"
+#include "mc146818rtc.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@@ -192,7 +193,7 @@ static int cmos_get_fd_drive_type(int fd0)
}
static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd,
- RTCState *s)
+ ISADevice *s)
{
int cylinders, heads, sectors;
bdrv_get_geometry_hint(hd, &cylinders, &heads, §ors);
@@ -225,7 +226,7 @@ static int boot_device2nibble(char boot_device)
return 0;
}
-static int set_boot_dev(RTCState *s, const char *boot_device, int fd_bootchk)
+static int set_boot_dev(ISADevice *s, const char *boot_device, int fd_bootchk)
{
#define PC_MAX_BOOT_DEVICES 3
int nbds, bds[3] = { 0, };
@@ -257,7 +258,7 @@ static int pc_boot_set(void *opaque, const char *boot_device)
/* hd_table must contain 4 block drivers */
void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
const char *boot_device, DriveInfo **hd_table,
- FDCtrl *floppy_controller, RTCState *s)
+ FDCtrl *floppy_controller, ISADevice *s)
{
int val;
int fd0, fd1, nb;
@@ -752,7 +753,7 @@ int cpu_is_bsp(CPUState *env)
BIOS will read it and start S3 resume at POST Entry */
void pc_cmos_set_s3_resume(void *opaque, int irq, int level)
{
- RTCState *s = opaque;
+ ISADevice *s = opaque;
if (level) {
rtc_set_memory(s, 0xF, 0xFE);
@@ -929,7 +930,7 @@ void pc_vga_init(PCIBus *pci_bus)
void pc_basic_device_init(qemu_irq *isa_irq,
FDCtrl **floppy_controller,
- RTCState **rtc_state)
+ ISADevice **rtc_state)
{
int i;
DriveInfo *fd[MAX_FD];
diff --git a/hw/pc.h b/hw/pc.h
index e3cc0a5..2e2f4e2 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -5,7 +5,6 @@
#include "ioport.h"
#include "isa.h"
#include "fdc.h"
-#include "mc146818rtc.h"
/* PC-style peripherals (also used by other machines). */
@@ -95,14 +94,14 @@ qemu_irq *pc_allocate_cpu_irq(void);
void pc_vga_init(PCIBus *pci_bus);
void pc_basic_device_init(qemu_irq *isa_irq,
FDCtrl **floppy_controller,
- RTCState **rtc_state);
+ ISADevice **rtc_state);
void pc_init_ne2k_isa(NICInfo *nd);
#ifdef HAS_AUDIO
void pc_audio_init (PCIBus *pci_bus, qemu_irq *pic);
#endif
void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
const char *boot_device, DriveInfo **hd_table,
- FDCtrl *floppy_controller, RTCState *s);
+ FDCtrl *floppy_controller, ISADevice *s);
void pc_pci_device_init(PCIBus *pci_bus);
void ioport_set_a20(int enable);
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index 52d8591..a0ed7ad 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -61,7 +61,7 @@ static void pc_init1(ram_addr_t ram_size,
IsaIrqState *isa_irq_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
FDCtrl *floppy_controller;
- RTCState *rtc_state;
+ ISADevice *rtc_state;
pc_cpus_init(cpu_model);
diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
index a5e25b5..09a9881 100644
--- a/hw/ppc_prep.c
+++ b/hw/ppc_prep.c
@@ -36,6 +36,7 @@
#include "qemu-log.h"
#include "ide.h"
#include "loader.h"
+#include "mc146818rtc.h"
//#define HARD_DEBUG_PPC_IO
//#define DEBUG_PPC_IO
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 20/26] acpi_piix4: qdevfy.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (18 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 19/26] rtc: make rtc_xxx accept/return ISADevice instead of RTCState Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 21/26] pci hotplug: add argument to pci hot plug callback Isaku Yamahata
` (6 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
qdevfy acpi_piix4.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
changes v10 -> v11:
- pass DeviceState of piix4-pm to pc_smbus_init().
Now info qtree shows smbus.
---
hw/acpi_piix4.c | 61 +++++++++++++++++++++++++++++++++++++++++-------------
1 files changed, 46 insertions(+), 15 deletions(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index 1292d2b..d4f4662 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -41,6 +41,7 @@ typedef struct PIIX4PMState {
int64_t tmr_overflow_time;
PMSMBus smb;
+ uint32_t smb_io_base;
qemu_irq irq;
qemu_irq cmos_s3;
@@ -319,16 +320,11 @@ static void piix4_powerdown(void *opaque, int irq, int power_failing)
}
}
-i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
- qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
- int kvm_enabled)
+static int piix4_pm_initfn(PCIDevice *dev)
{
- PIIX4PMState *s;
+ PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
uint8_t *pci_conf;
- s = (PIIX4PMState *)pci_register_device(bus,
- "PM", sizeof(PIIX4PMState),
- devfn, NULL, pm_write_config);
pm_state = s;
pci_conf = s->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
@@ -348,7 +344,6 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
- s->kvm_enabled = kvm_enabled;
if (s->kvm_enabled) {
/* Mark SMM as already inited to prevent SMM from running. KVM does not
* support SMM mode. */
@@ -362,27 +357,63 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
(serial_hds[1] != NULL ? 0x90 : 0);
- pci_conf[0x90] = smb_io_base | 1;
- pci_conf[0x91] = smb_io_base >> 8;
+ pci_conf[0x90] = s->smb_io_base | 1;
+ pci_conf[0x91] = s->smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
- register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
- register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
+ register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
+ register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
- vmstate_register(0, &vmstate_acpi, s);
+ pm_smbus_init(&s->dev.qdev, &s->smb);
+ qemu_register_reset(piix4_reset, s);
+
+ return 0;
+}
- pm_smbus_init(NULL, &s->smb);
+i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+ qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
+ int kvm_enabled)
+{
+ PCIDevice *dev;
+ PIIX4PMState *s;
+
+ dev = pci_create(bus, devfn, "PIIX4_PM");
+ qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
+
+ s = DO_UPCAST(PIIX4PMState, dev, dev);
s->irq = sci_irq;
s->cmos_s3 = cmos_s3;
s->smi_irq = smi_irq;
- qemu_register_reset(piix4_reset, s);
+ s->kvm_enabled = kvm_enabled;
+
+ qdev_init_nofail(&dev->qdev);
return s->smb.smbus;
}
+static PCIDeviceInfo piix4_pm_info = {
+ .qdev.name = "PIIX4_PM",
+ .qdev.desc = "PM",
+ .qdev.size = sizeof(PIIX4PMState),
+ .qdev.vmsd = &vmstate_acpi,
+ .init = piix4_pm_initfn,
+ .config_write = pm_write_config,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void piix4_pm_register(void)
+{
+ pci_qdev_register(&piix4_pm_info);
+}
+
+device_init(piix4_pm_register);
+
#define GPE_BASE 0xafe0
#define PCI_BASE 0xae00
#define PCI_EJ_BASE 0xae08
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 21/26] pci hotplug: add argument to pci hot plug callback.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (19 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 20/26] acpi_piix4: qdevfy Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 22/26] pci hotadd, acpi_piix4: remove global variables Isaku Yamahata
` (5 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
Add argument, DeviceState*, to pci hot plug callback.
The argument will be used later to remove global variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
changes v10 -> v11:
- change callback argument from void* to DeviceState*.
---
hw/acpi_piix4.c | 6 +++---
hw/pci.c | 8 +++++---
hw/pci.h | 4 ++--
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index d4f4662..c3e71e3 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -568,7 +568,7 @@ static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
#endif
}
-static int piix4_device_hotplug(PCIDevice *dev, int state);
+static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
void piix4_acpi_system_hot_add_init(PCIBus *bus)
{
@@ -581,7 +581,7 @@ void piix4_acpi_system_hot_add_init(PCIBus *bus)
register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
- pci_bus_hotplug(bus, piix4_device_hotplug);
+ pci_bus_hotplug(bus, piix4_device_hotplug, NULL);
}
static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
@@ -596,7 +596,7 @@ static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
p->down |= (1 << slot);
}
-static int piix4_device_hotplug(PCIDevice *dev, int state)
+static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
{
int slot = PCI_SLOT(dev->devfn);
diff --git a/hw/pci.c b/hw/pci.c
index f167436..679f067 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -42,6 +42,7 @@ struct PCIBus {
pci_set_irq_fn set_irq;
pci_map_irq_fn map_irq;
pci_hotplug_fn hotplug;
+ DeviceState *hotplug_qdev;
void *irq_opaque;
PCIDevice *devices[256];
PCIDevice *parent_dev;
@@ -233,10 +234,11 @@ void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
bus->irq_count = qemu_mallocz(nirq * sizeof(bus->irq_count[0]));
}
-void pci_bus_hotplug(PCIBus *bus, pci_hotplug_fn hotplug)
+void pci_bus_hotplug(PCIBus *bus, pci_hotplug_fn hotplug, DeviceState *qdev)
{
bus->qbus.allow_hotplug = 1;
bus->hotplug = hotplug;
+ bus->hotplug_qdev = qdev;
}
void pci_bus_set_mem_base(PCIBus *bus, target_phys_addr_t base)
@@ -1661,7 +1663,7 @@ static int pci_qdev_init(DeviceState *qdev, DeviceInfo *base)
pci_add_option_rom(pci_dev);
if (qdev->hotplugged)
- bus->hotplug(pci_dev, 1);
+ bus->hotplug(bus->hotplug_qdev, pci_dev, 1);
return 0;
}
@@ -1669,7 +1671,7 @@ static int pci_unplug_device(DeviceState *qdev)
{
PCIDevice *dev = DO_UPCAST(PCIDevice, qdev, qdev);
- dev->bus->hotplug(dev, 0);
+ dev->bus->hotplug(dev->bus->hotplug_qdev, dev, 0);
return 0;
}
diff --git a/hw/pci.h b/hw/pci.h
index 625188c..f6e6c5f 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -209,13 +209,13 @@ int pci_device_load(PCIDevice *s, QEMUFile *f);
typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);
typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
-typedef int (*pci_hotplug_fn)(PCIDevice *pci_dev, int state);
+typedef int (*pci_hotplug_fn)(DeviceState *qdev, PCIDevice *pci_dev, int state);
void pci_bus_new_inplace(PCIBus *bus, DeviceState *parent,
const char *name, int devfn_min);
PCIBus *pci_bus_new(DeviceState *parent, const char *name, int devfn_min);
void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
void *irq_opaque, int nirq);
-void pci_bus_hotplug(PCIBus *bus, pci_hotplug_fn hotplug);
+void pci_bus_hotplug(PCIBus *bus, pci_hotplug_fn hotplug, DeviceState *dev);
PCIBus *pci_register_bus(DeviceState *parent, const char *name,
pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
void *irq_opaque, int devfn_min, int nirq);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 22/26] pci hotadd, acpi_piix4: remove global variables
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (20 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 21/26] pci hotplug: add argument to pci hot plug callback Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 23/26] pm_smbus: remove #ifdef DEBUG Isaku Yamahata
` (4 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
remove global variables, gpe and pci0_status by moving them
into PIIX4PMState.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
Changes v12 -> v13:
- minor style clean up
Changes v10 -> v11:
- change callback argument of hotplug from void* to DeviceState*.
---
hw/acpi_piix4.c | 89 +++++++++++++++++++++++++++++-------------------------
hw/pc.h | 1 -
hw/pc_piix.c | 1 -
3 files changed, 48 insertions(+), 43 deletions(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index c3e71e3..bb3d094 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -29,6 +29,20 @@
#define ACPI_DBG_IO_ADDR 0xb044
+#define GPE_BASE 0xafe0
+#define PCI_BASE 0xae00
+#define PCI_EJ_BASE 0xae08
+
+struct gpe_regs {
+ uint16_t sts; /* status */
+ uint16_t en; /* enabled */
+};
+
+struct pci_status {
+ uint32_t up;
+ uint32_t down;
+};
+
typedef struct PIIX4PMState {
PCIDevice dev;
uint16_t pmsts;
@@ -47,13 +61,17 @@ typedef struct PIIX4PMState {
qemu_irq cmos_s3;
qemu_irq smi_irq;
int kvm_enabled;
+
+ /* for pci hotplug */
+ struct gpe_regs gpe;
+ struct pci_status pci0_status;
} PIIX4PMState;
+static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
+
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
-static PIIX4PMState *pm_state;
-
static uint32_t get_pmtmr(PIIX4PMState *s)
{
uint32_t d;
@@ -325,7 +343,6 @@ static int piix4_pm_initfn(PCIDevice *dev)
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
uint8_t *pci_conf;
- pm_state = s;
pci_conf = s->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
@@ -369,6 +386,7 @@ static int piix4_pm_initfn(PCIDevice *dev)
pm_smbus_init(&s->dev.qdev, &s->smb);
qemu_register_reset(piix4_reset, s);
+ piix4_acpi_system_hot_add_init(dev->bus, s);
return 0;
}
@@ -414,23 +432,6 @@ static void piix4_pm_register(void)
device_init(piix4_pm_register);
-#define GPE_BASE 0xafe0
-#define PCI_BASE 0xae00
-#define PCI_EJ_BASE 0xae08
-
-struct gpe_regs {
- uint16_t sts; /* status */
- uint16_t en; /* enabled */
-};
-
-struct pci_status {
- uint32_t up;
- uint32_t down;
-};
-
-static struct gpe_regs gpe;
-static struct pci_status pci0_status;
-
static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
{
if (addr & 1)
@@ -570,45 +571,51 @@ static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
-void piix4_acpi_system_hot_add_init(PCIBus *bus)
+static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
- register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
- register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe);
+ struct gpe_regs *gpe = &s->gpe;
+ struct pci_status *pci0_status = &s->pci0_status;
- register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status);
- register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, &pci0_status);
+ register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, gpe);
+ register_ioport_read(GPE_BASE, 4, 1, gpe_readb, gpe);
+
+ register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
+ register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
- pci_bus_hotplug(bus, piix4_device_hotplug, NULL);
+ pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
}
-static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
+static void enable_device(PIIX4PMState *s, int slot)
{
- g->sts |= 2;
- p->up |= (1 << slot);
+ s->gpe.sts |= 2;
+ s->pci0_status.up |= (1 << slot);
}
-static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
+static void disable_device(PIIX4PMState *s, int slot)
{
- g->sts |= 2;
- p->down |= (1 << slot);
+ s->gpe.sts |= 2;
+ s->pci0_status.down |= (1 << slot);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
{
int slot = PCI_SLOT(dev->devfn);
+ PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
+ DO_UPCAST(PCIDevice, qdev, qdev));
- pci0_status.up = 0;
- pci0_status.down = 0;
- if (state)
- enable_device(&pci0_status, &gpe, slot);
- else
- disable_device(&pci0_status, &gpe, slot);
- if (gpe.en & 2) {
- qemu_set_irq(pm_state->irq, 1);
- qemu_set_irq(pm_state->irq, 0);
+ s->pci0_status.up = 0;
+ s->pci0_status.down = 0;
+ if (state) {
+ enable_device(s, slot);
+ } else {
+ disable_device(s, slot);
+ }
+ if (s->gpe.en & 2) {
+ qemu_set_irq(s->irq, 1);
+ qemu_set_irq(s->irq, 0);
}
return 0;
}
diff --git a/hw/pc.h b/hw/pc.h
index 2e2f4e2..654b7b3 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -124,7 +124,6 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
int kvm_enabled);
void piix4_smbus_register_device(SMBusDevice *dev, uint8_t addr);
-void piix4_acpi_system_hot_add_init(PCIBus *bus);
/* hpet.c */
extern int no_hpet;
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index a0ed7ad..70f563a 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -150,7 +150,6 @@ static void pc_init1(ram_addr_t ram_size,
qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
qdev_init_nofail(eeprom);
}
- piix4_acpi_system_hot_add_init(pci_bus);
}
if (i440fx_state) {
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 23/26] pm_smbus: remove #ifdef DEBUG.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (21 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 22/26] pci hotadd, acpi_piix4: remove global variables Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 24/26] acpi_piix4: " Isaku Yamahata
` (3 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
remove #ifdef DEBUG by using macro.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/pm_smbus.c | 21 ++++++++++++---------
1 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/hw/pm_smbus.c b/hw/pm_smbus.c
index 6ef6b9e..9929d72 100644
--- a/hw/pm_smbus.c
+++ b/hw/pm_smbus.c
@@ -37,6 +37,15 @@
#define SMBHSTDAT1 0x06
#define SMBBLKDAT 0x07
+//#define DEBUG
+
+#ifdef DEBUG
+# define SMBUS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
+#else
+# define SMBUS_DPRINTF(format, ...) do { } while (0)
+#endif
+
+
static void smb_transaction(PMSMBus *s)
{
uint8_t prot = (s->smb_ctl >> 2) & 0x07;
@@ -45,9 +54,7 @@ static void smb_transaction(PMSMBus *s)
uint8_t addr = s->smb_addr >> 1;
i2c_bus *bus = s->smbus;
-#ifdef DEBUG
- printf("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
-#endif
+ SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
switch(prot) {
case 0x0:
smbus_quick_command(bus, addr, read);
@@ -96,9 +103,7 @@ void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
{
PMSMBus *s = opaque;
addr &= 0x3f;
-#ifdef DEBUG
- printf("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
-#endif
+ SMBUS_DPRINTF("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
switch(addr) {
case SMBHSTSTS:
s->smb_stat = 0;
@@ -166,9 +171,7 @@ uint32_t smb_ioport_readb(void *opaque, uint32_t addr)
val = 0;
break;
}
-#ifdef DEBUG
- printf("SMB readb port=0x%04x val=0x%02x\n", addr, val);
-#endif
+ SMBUS_DPRINTF("SMB readb port=0x%04x val=0x%02x\n", addr, val);
return val;
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 24/26] acpi_piix4: remove #ifdef DEBUG.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (22 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 23/26] pm_smbus: remove #ifdef DEBUG Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 25/26] apm: " Isaku Yamahata
` (2 subsequent siblings)
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
removed #ifdef DEBUG by using macro.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/acpi_piix4.c | 55 ++++++++++++++++++-------------------------------------
1 files changed, 18 insertions(+), 37 deletions(-)
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index bb3d094..fdef697 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -27,6 +27,12 @@
//#define DEBUG
+#ifdef DEBUG
+# define PIIX4_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
+#else
+# define PIIX4_DPRINTF(format, ...) do { } while (0)
+#endif
+
#define ACPI_DBG_IO_ADDR 0xb044
#define GPE_BASE 0xafe0
@@ -172,9 +178,7 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
default:
break;
}
-#ifdef DEBUG
- printf("PM writew port=0x%04x val=0x%04x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", addr, val);
}
static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
@@ -197,19 +201,14 @@ static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
val = 0;
break;
}
-#ifdef DEBUG
- printf("PM readw port=0x%04x val=0x%04x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", addr, val);
return val;
}
static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
{
// PIIX4PMState *s = opaque;
-#ifdef DEBUG
- addr &= 0x3f;
- printf("PM writel port=0x%04x val=0x%08x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr & 0x3f, val);
}
static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
@@ -226,9 +225,7 @@ static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
val = 0;
break;
}
-#ifdef DEBUG
- printf("PM readl port=0x%04x val=0x%08x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
return val;
}
@@ -252,9 +249,7 @@ static void apm_ctrl_changed(uint32_t val, void *arg)
static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
{
-#if defined(DEBUG)
- printf("ACPI: DBG: 0x%08x\n", val);
-#endif
+ PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
}
static void pm_io_space_update(PIIX4PMState *s)
@@ -266,9 +261,7 @@ static void pm_io_space_update(PIIX4PMState *s)
pm_io_base &= 0xffc0;
/* XXX: need to improve memory and ioport allocation */
-#if defined(DEBUG)
- printf("PM: mapping to 0x%x\n", pm_io_base);
-#endif
+ PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
@@ -456,9 +449,7 @@ static uint32_t gpe_readb(void *opaque, uint32_t addr)
break;
}
-#if defined(DEBUG)
- printf("gpe read %x == %x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
return val;
}
@@ -498,9 +489,7 @@ static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
break;
}
-#if defined(DEBUG)
- printf("gpe write %x <== %d\n", addr, val);
-#endif
+ PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
}
static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
@@ -518,9 +507,7 @@ static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
break;
}
-#if defined(DEBUG)
- printf("pcihotplug read %x == %x\n", addr, val);
-#endif
+ PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
return val;
}
@@ -536,16 +523,12 @@ static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
break;
}
-#if defined(DEBUG)
- printf("pcihotplug write %x <== %d\n", addr, val);
-#endif
+ PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
}
static uint32_t pciej_read(void *opaque, uint32_t addr)
{
-#if defined(DEBUG)
- printf("pciej read %x\n", addr);
-#endif
+ PIIX4_DPRINTF("pciej read %x\n", addr);
return 0;
}
@@ -564,9 +547,7 @@ static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
}
-#if defined(DEBUG)
- printf("pciej write %x <== %d\n", addr, val);
-#endif
+ PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 25/26] apm: remove #ifdef DEBUG.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (23 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 24/26] acpi_piix4: " Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-14 7:29 ` [Qemu-devel] [PATCH 26/26] mc146818rtc: remove #ifdef DEBUG_CMOS Isaku Yamahata
2010-05-15 17:02 ` [Qemu-devel] Re: [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Blue Swirl
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
remove #ifdef DEBUG by using macro.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/apm.c | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/hw/apm.c b/hw/apm.c
index d20db3d..3cbde43 100644
--- a/hw/apm.c
+++ b/hw/apm.c
@@ -23,6 +23,12 @@
//#define DEBUG
+#ifdef DEBUG
+# define APM_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
+#else
+# define APM_DPRINTF(format, ...) do { } while (0)
+#endif
+
/* fixed I/O location */
#define APM_CNT_IOPORT 0xb2
#define APM_STS_IOPORT 0xb3
@@ -31,9 +37,7 @@ static void apm_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
{
APMState *apm = opaque;
addr &= 1;
-#ifdef DEBUG
- printf("apm_ioport_writeb addr=0x%x val=0x%02x\n", addr, val);
-#endif
+ APM_DPRINTF("apm_ioport_writeb addr=0x%x val=0x%02x\n", addr, val);
if (addr == 0) {
apm->apmc = val;
@@ -56,9 +60,7 @@ static uint32_t apm_ioport_readb(void *opaque, uint32_t addr)
} else {
val = apm->apms;
}
-#ifdef DEBUG
- printf("apm_ioport_readb addr=0x%x val=0x%02x\n", addr, val);
-#endif
+ APM_DPRINTF("apm_ioport_readb addr=0x%x val=0x%02x\n", addr, val);
return val;
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] [PATCH 26/26] mc146818rtc: remove #ifdef DEBUG_CMOS.
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (24 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 25/26] apm: " Isaku Yamahata
@ 2010-05-14 7:29 ` Isaku Yamahata
2010-05-15 17:02 ` [Qemu-devel] Re: [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Blue Swirl
26 siblings, 0 replies; 29+ messages in thread
From: Isaku Yamahata @ 2010-05-14 7:29 UTC (permalink / raw)
To: qemu-devel; +Cc: blauwirbel, yamahata, kraxel
remove #ifdef DEBUG_CMOS by using macro.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
---
hw/mc146818rtc.c | 18 ++++++++++--------
1 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/hw/mc146818rtc.c b/hw/mc146818rtc.c
index cd5e0d7..bf648e5 100644
--- a/hw/mc146818rtc.c
+++ b/hw/mc146818rtc.c
@@ -32,6 +32,12 @@
//#define DEBUG_CMOS
+#ifdef DEBUG_CMOS
+# define CMOS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
+#else
+# define CMOS_DPRINTF(format, ...) do { } while (0)
+#endif
+
#define RTC_REINJECT_ON_ACK_COUNT 20
#define RTC_SECONDS 0
@@ -211,10 +217,8 @@ static void cmos_ioport_write(void *opaque, uint32_t addr, uint32_t data)
if ((addr & 1) == 0) {
s->cmos_index = data & 0x7f;
} else {
-#ifdef DEBUG_CMOS
- printf("cmos: write index=0x%02x val=0x%02x\n",
- s->cmos_index, data);
-#endif
+ CMOS_DPRINTF("cmos: write index=0x%02x val=0x%02x\n",
+ s->cmos_index, data);
switch(s->cmos_index) {
case RTC_SECONDS_ALARM:
case RTC_MINUTES_ALARM:
@@ -485,10 +489,8 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t addr)
ret = s->cmos_data[s->cmos_index];
break;
}
-#ifdef DEBUG_CMOS
- printf("cmos: read index=0x%02x val=0x%02x\n",
- s->cmos_index, ret);
-#endif
+ CMOS_DPRINTF("cmos: read index=0x%02x val=0x%02x\n",
+ s->cmos_index, ret);
return ret;
}
}
--
1.6.6.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [Qemu-devel] Re: [PATCH 00/26] split out piix specific part from pc emulator and some clean ups
2010-05-14 7:28 [Qemu-devel] [PATCH 00/26] split out piix specific part from pc emulator and some clean ups Isaku Yamahata
` (25 preceding siblings ...)
2010-05-14 7:29 ` [Qemu-devel] [PATCH 26/26] mc146818rtc: remove #ifdef DEBUG_CMOS Isaku Yamahata
@ 2010-05-15 17:02 ` Blue Swirl
2010-05-17 11:18 ` Markus Armbruster
26 siblings, 1 reply; 29+ messages in thread
From: Blue Swirl @ 2010-05-15 17:02 UTC (permalink / raw)
To: Isaku Yamahata; +Cc: qemu-devel, kraxel
Thanks, applied all.
On 5/14/10, Isaku Yamahata <yamahata@valinux.co.jp> wrote:
> patch series description:
> This patch series is for spliting out piix specific part from pc emulator
> to make it easier to implement other pc chipset emulator.
>
> I observed that make was confused not to rebuild files sometimes due to
> splitting up a file into files. It results in duplicated/undefined symbols.
> In that case, 'make clean;make' will fix it.
>
>
> Blue, your patches were combied into 21/26, and 22/26. Please check it.
> Your patches to acpi.c had some issues. I fixed them in this patch series.
>
> 1/2 acpi: remove static pm_state:
> The first argument, dev, of piix4_device_hotplug() is not
> PIIX4PMState device, but hot plugged device.
> So the container_of() doesn't make sense.
> 2/2 acpi: remove static gpe and pci0_status variables
> The call back argument to pge_readb(), gpe_writeb() is struct gpe_regs.
> Not PIIX4PMState.
> The callback argument pcihotplug_read(), pcihotplug_write() is
> struct pci_status. Not PIIX4PMState.
> Those argument type is void*, so compiler didn't catch it.
>
> thanks,
>
> Changes from V12:
> - 2/26 acpi: split out apm register emulation from acpi.c
> The patch originally convert CMOS S3 code to qemu_irq. However
> the conversion is already done by Blue Swirl. So the patch was simplified.
> - 22/26 pci hotadd, acpi_piix4: remove global variables
> Minor style fix according to Blue's patch.
> - rebased to 5acd0646b6033d40ef5d0ae06338cc354108f640
>
> Changes from V11:
> - s/pc_smbus/pm_smbus/g, s/pc_apm/apm/g and so on
> because it isn't pc specifc. mips also uses it.
> - No logic changes.
>
> Changes from V10:
> - pass DeviceState* to pc_smbus_init(), now info qtree shows smbus.
> - change pci hotplug argument from void * to DeviceState*.
>
> Changes from V9:
> - rebased 502e64fe23f19c086d42f6178cdda19e58996080
> - use qemu_irq to remove global variables, rtc_state
> - make rtc_xxx functions accept/return ISADevice and related clean ups
> - pci hot plug clean up
> - removed #ifdef DEBUG patches.
>
>
> Changes from V8:
> - make rtc_xxx functions accept/return ISADevice.
> - move up ioapic initalization patch.
> - fixed up copyright notice.
>
> Changes from V7:
> - rebased to fe0d61231eb6be6a83c54f4a2795f924ee963f8f
>
> Changes from v6:
> - rebased to 731c54f86988d3f28268f184fabfe9b2a32fb5d3
>
> Changes from v5:
> - rebased 0.11.0-rc0
> - changed qemu_system_powerdown_register() to call
> qemu_system_shutdown_request() if qemu_system_shutdown() is called before
> registering.
>
> Changes from v4:
> - fix version number.
> - rebased anthony's staging tree whose latest change set is
> 62969268f876c547ee64da6d60e0f363e0f1df75
>
> Changes from v3:
> - move qemu_system_powerdown() in vl.c and more generic
> following the comment by Marcelo Tosatti <mtosatti@redhat.com>
> acpi.c: make qemu_system_powerdown() piix independent.
> - define cmos_set_s3_resume_init() and cmos_set_s3_resume() in pc.c
> even if TARGET_I386 isn't defined following th ecommit by
> Paolo Bonzini <bonzini@gnu.org>
> pc.c: remove a global variable, RTCState *rtc_state.
> - minor compilation fixes
>
> Changes from v2:
> - clean up pc_pci_device_init() not to use unnecessary braces.
>
> Changes from v1:
> - make patches full bisectable
> - typo s/allocte/allocate/
> - some minor fixes
> - dropped a merged patch
>
> Isaku Yamahata (26):
> acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c
> acpi: split out apm register emulation from acpi.c
> acpi: add acpi constants from linux header files and use them.
> acpi: split acpi.c into the common part and the piix4 part.
> pc: initialize ioapic before use.
> pc, i440fx: Make smm enable/disable function i440fx independent.
> pc: make an unnecessary global variable, pit, local.
> pc: remove a global variable, floppy_controller.
> pc: remove global variable rtc_state by using qemu_irq.
> pc: introduce a function to allocate cpu irq.
> pc: make pc_init1() not refer ferr_irq directly.
> pc: split out cpu initialization from pc_init1() into pc_cpus_init().
> pc: split out memory allocation from pc_init1() into pc_memory_init()
> pc: split out vga initialization from pc_init1() into pc_vga_init().
> pc: split out basic device init from pc_init1() into
> pc_basic_device_init()
> pc: split out pci device init from pc_init1() into
> pc_pci_device_init()
> pc: split out piix specific part from pc.c into pc_piix.c
> pc: move rtc declarations from pc.h into a dedicated header file.
> rtc: make rtc_xxx accept/return ISADevice instead of RTCState.
> acpi_piix4: qdevfy.
> pci hotplug: add argument to pci hot plug callback.
> pci hotadd, acpi_piix4: remove global variables
> pm_smbus: remove #ifdef DEBUG.
> acpi_piix4: remove #ifdef DEBUG.
> apm: remove #ifdef DEBUG.
> mc146818rtc: remove #ifdef DEBUG_CMOS.
>
> Makefile.target | 2 +
> hw/acpi.c | 743 +-----------------------------------------------------
> hw/acpi.h | 78 ++++++
> hw/acpi_piix4.c | 602 +++++++++++++++++++++++++++++++++++++++++++
> hw/apm.c | 87 +++++++
> hw/apm.h | 22 ++
> hw/fdc.h | 5 +
> hw/mc146818rtc.c | 44 ++--
> hw/mc146818rtc.h | 10 +
> hw/mips_jazz.c | 1 +
> hw/mips_malta.c | 3 +-
> hw/mips_r4k.c | 3 +-
> hw/pc.c | 423 +++++++------------------------
> hw/pc.h | 48 +++-
> hw/pc_piix.c | 316 +++++++++++++++++++++++
> hw/pci.c | 8 +-
> hw/pci.h | 4 +-
> hw/piix_pci.c | 5 +-
> hw/pm_smbus.c | 181 +++++++++++++
> hw/pm_smbus.h | 21 ++
> hw/ppc_prep.c | 1 +
> 21 files changed, 1500 insertions(+), 1107 deletions(-)
> create mode 100644 hw/acpi.h
> create mode 100644 hw/acpi_piix4.c
> create mode 100644 hw/apm.c
> create mode 100644 hw/apm.h
> create mode 100644 hw/mc146818rtc.h
> create mode 100644 hw/pc_piix.c
> create mode 100644 hw/pm_smbus.c
> create mode 100644 hw/pm_smbus.h
>
>
^ permalink raw reply [flat|nested] 29+ messages in thread