[Qemu-devel] [PATCH v2 0/5] Add Microblaze configuration options

[Qemu-devel] [PATCH v2 0/5] Add Microblaze configuration options

[Alistair Francis]

Firstly this patch series tidies up some code and removes
a "xlnx." prefix.

Then it moves the Microblaze PVR registers to the end
of the CPUMBState to preserve them during reset. This
allows most of the operations on them to be moved from
the reset to the realise. Except for the machine specific
ones which will be moved when the other properties are
converted across to standard QEMU props, after this patch
series is accepted (either merged or the method I'm using
is approved). See the individual commit for more details.

Next it adds the "use-stack-protection" property
to the Microblaze CPU, which allows stack protection to be
disabled.

It also converts the previously hardcoded method of enabling
the FPU to use standard QEMU properties. This simplifies the
logic in the target-microblaze translate.c.

V2:
 - Small fixes
 - Disable stack protection by default
 - Remove the memset and cpu_reset functions from the MB realise
Changes since RFC:
 - Preserve the PVR registers during resets
 - Move most of the logic into realise functions
 - Small name and function changes

Alistair Francis (5):
  target-microblaze: Fix up indentation
  target-microblaze: Preserve the pvr registers during reset
  target-microblaze: Allow the stack protection to be disabled/enabled
  target-microblaze: Tidy up the base-vectors property
  target-microblaze: Convert use-fpu to a CPU property

 hw/microblaze/petalogix_ml605_mmu.c |    4 +-
 target-microblaze/cpu-qom.h         |    9 +++++-
 target-microblaze/cpu.c             |   56 +++++++++++++++++++++-------------
 target-microblaze/cpu.h             |   11 ++++--
 target-microblaze/helper.c          |    8 ++--
 target-microblaze/op_helper.c       |   10 +++---
 target-microblaze/translate.c       |   14 +++-----
 7 files changed, 65 insertions(+), 47 deletions(-)

[Qemu-devel] [PATCH v2 1/5] target-microblaze: Fix up indentation

[Alistair Francis]

Fix up the incorrect indentation level in the helper_stackprot() function.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---

 target-microblaze/op_helper.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/target-microblaze/op_helper.c b/target-microblaze/op_helper.c
index a4c8f04..d2b3624 100644
--- a/target-microblaze/op_helper.c
+++ b/target-microblaze/op_helper.c
@@ -468,11 +468,11 @@ void helper_memalign(CPUMBState *env, uint32_t addr, uint32_t dr, uint32_t wr,
 void helper_stackprot(CPUMBState *env, uint32_t addr)
 {
     if (addr < env->slr || addr > env->shr) {
-            qemu_log("Stack protector violation at %x %x %x\n",
-                     addr, env->slr, env->shr);
-            env->sregs[SR_EAR] = addr;
-            env->sregs[SR_ESR] = ESR_EC_STACKPROT;
-            helper_raise_exception(env, EXCP_HW_EXCP);
+        qemu_log("Stack protector violation at %x %x %x\n",
+                 addr, env->slr, env->shr);
+        env->sregs[SR_EAR] = addr;
+        env->sregs[SR_ESR] = ESR_EC_STACKPROT;
+        helper_raise_exception(env, EXCP_HW_EXCP);
     }
 }
 
-- 
1.7.1

Re: [Qemu-devel] [PATCH v2 1/5] target-microblaze: Fix up indentation

[Edgar E. Iglesias]

On Thu, May 28, 2015 at 03:36:25PM +1000, Alistair Francis wrote:
> Fix up the incorrect indentation level in the helper_stackprot() function.
> 
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>


> ---
> 
>  target-microblaze/op_helper.c |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/target-microblaze/op_helper.c b/target-microblaze/op_helper.c
> index a4c8f04..d2b3624 100644
> --- a/target-microblaze/op_helper.c
> +++ b/target-microblaze/op_helper.c
> @@ -468,11 +468,11 @@ void helper_memalign(CPUMBState *env, uint32_t addr, uint32_t dr, uint32_t wr,
>  void helper_stackprot(CPUMBState *env, uint32_t addr)
>  {
>      if (addr < env->slr || addr > env->shr) {
> -            qemu_log("Stack protector violation at %x %x %x\n",
> -                     addr, env->slr, env->shr);
> -            env->sregs[SR_EAR] = addr;
> -            env->sregs[SR_ESR] = ESR_EC_STACKPROT;
> -            helper_raise_exception(env, EXCP_HW_EXCP);
> +        qemu_log("Stack protector violation at %x %x %x\n",
> +                 addr, env->slr, env->shr);
> +        env->sregs[SR_EAR] = addr;
> +        env->sregs[SR_ESR] = ESR_EC_STACKPROT;
> +        helper_raise_exception(env, EXCP_HW_EXCP);
>      }
>  }
>  
> -- 
> 1.7.1
> 

[Qemu-devel] [PATCH v2 2/5] target-microblaze: Preserve the pvr registers during reset

[Alistair Francis]

Move the Microblaze PVR registers to the end of the CPUMBState
and preserve them during reset. This is similar to what the
QEMU ARM model does with some of it's registers.

This allows the Microblaze PVR registers to only be set once
at realise instead of constantly at reset.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
V2:
 - Remove the memset and cpu_reset functions as they aren't
   required in the realize and I'm touching them anyway.

NOTE: The individual machine resets still write to the PVR
registers on each reset. This is no longer required as it only
needs to be done once. Instead of moving them now, they are
being left there and will be removed when they are all
converted to the standard CPU properties.

 target-microblaze/cpu.c |   40 ++++++++++++++++++++++------------------
 target-microblaze/cpu.h |   10 ++++++----
 2 files changed, 28 insertions(+), 22 deletions(-)

diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
index 67e3182..95be540 100644
--- a/target-microblaze/cpu.c
+++ b/target-microblaze/cpu.c
@@ -63,13 +63,34 @@ static void mb_cpu_reset(CPUState *s)
 
     mcc->parent_reset(s);
 
-    memset(env, 0, sizeof(CPUMBState));
+    memset(env, 0, offsetof(CPUMBState, pvr));
     env->res_addr = RES_ADDR_NONE;
     tlb_flush(s, 1);
 
     /* Disable stack protector.  */
     env->shr = ~0;
 
+#if defined(CONFIG_USER_ONLY)
+    /* start in user mode with interrupts enabled.  */
+    env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
+#else
+    env->sregs[SR_MSR] = 0;
+    mmu_init(&env->mmu);
+    env->mmu.c_mmu = 3;
+    env->mmu.c_mmu_tlb_access = 3;
+    env->mmu.c_mmu_zones = 16;
+#endif
+}
+
+static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
+{
+    CPUState *cs = CPU(dev);
+    MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
+    MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
+    CPUMBState *env = &cpu->env;
+
+    qemu_init_vcpu(cs);
+
     env->pvr.regs[0] = PVR0_PVR_FULL_MASK \
                        | PVR0_USE_BARREL_MASK \
                        | PVR0_USE_DIV_MASK \
@@ -99,25 +120,8 @@ static void mb_cpu_reset(CPUState *s)
     env->sregs[SR_PC] = cpu->base_vectors;
 
 #if defined(CONFIG_USER_ONLY)
-    /* start in user mode with interrupts enabled.  */
-    env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
     env->pvr.regs[10] = 0x0c000000; /* Spartan 3a dsp.  */
-#else
-    env->sregs[SR_MSR] = 0;
-    mmu_init(&env->mmu);
-    env->mmu.c_mmu = 3;
-    env->mmu.c_mmu_tlb_access = 3;
-    env->mmu.c_mmu_zones = 16;
 #endif
-}
-
-static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
-{
-    CPUState *cs = CPU(dev);
-    MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
-
-    cpu_reset(cs);
-    qemu_init_vcpu(cs);
 
     mcc->parent_realize(dev, errp);
 }
diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
index 4ea04ac..e4c1cde 100644
--- a/target-microblaze/cpu.h
+++ b/target-microblaze/cpu.h
@@ -260,16 +260,18 @@ struct CPUMBState {
 #define IFLAGS_TB_MASK  (D_FLAG | IMM_FLAG | DRTI_FLAG | DRTE_FLAG | DRTB_FLAG)
     uint32_t iflags;
 
-    struct {
-        uint32_t regs[16];
-    } pvr;
-
 #if !defined(CONFIG_USER_ONLY)
     /* Unified MMU.  */
     struct microblaze_mmu mmu;
 #endif
 
     CPU_COMMON
+
+    /* These fields are preserved on reset.  */
+
+    struct {
+        uint32_t regs[16];
+    } pvr;
 };
 
 #include "cpu-qom.h"
-- 
1.7.1

Re: [Qemu-devel] [PATCH v2 2/5] target-microblaze: Preserve the pvr registers during reset

[Edgar E. Iglesias]

On Thu, May 28, 2015 at 03:37:03PM +1000, Alistair Francis wrote:
> Move the Microblaze PVR registers to the end of the CPUMBState
> and preserve them during reset. This is similar to what the
> QEMU ARM model does with some of it's registers.
> 
> This allows the Microblaze PVR registers to only be set once
> at realise instead of constantly at reset.
> 
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>



> ---
> V2:
>  - Remove the memset and cpu_reset functions as they aren't
>    required in the realize and I'm touching them anyway.
> 
> NOTE: The individual machine resets still write to the PVR
> registers on each reset. This is no longer required as it only
> needs to be done once. Instead of moving them now, they are
> being left there and will be removed when they are all
> converted to the standard CPU properties.
> 
>  target-microblaze/cpu.c |   40 ++++++++++++++++++++++------------------
>  target-microblaze/cpu.h |   10 ++++++----
>  2 files changed, 28 insertions(+), 22 deletions(-)
> 
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index 67e3182..95be540 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -63,13 +63,34 @@ static void mb_cpu_reset(CPUState *s)
>  
>      mcc->parent_reset(s);
>  
> -    memset(env, 0, sizeof(CPUMBState));
> +    memset(env, 0, offsetof(CPUMBState, pvr));
>      env->res_addr = RES_ADDR_NONE;
>      tlb_flush(s, 1);
>  
>      /* Disable stack protector.  */
>      env->shr = ~0;
>  
> +#if defined(CONFIG_USER_ONLY)
> +    /* start in user mode with interrupts enabled.  */
> +    env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
> +#else
> +    env->sregs[SR_MSR] = 0;
> +    mmu_init(&env->mmu);
> +    env->mmu.c_mmu = 3;
> +    env->mmu.c_mmu_tlb_access = 3;
> +    env->mmu.c_mmu_zones = 16;
> +#endif
> +}
> +
> +static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
> +{
> +    CPUState *cs = CPU(dev);
> +    MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
> +    MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
> +    CPUMBState *env = &cpu->env;
> +
> +    qemu_init_vcpu(cs);
> +
>      env->pvr.regs[0] = PVR0_PVR_FULL_MASK \
>                         | PVR0_USE_BARREL_MASK \
>                         | PVR0_USE_DIV_MASK \
> @@ -99,25 +120,8 @@ static void mb_cpu_reset(CPUState *s)
>      env->sregs[SR_PC] = cpu->base_vectors;
>  
>  #if defined(CONFIG_USER_ONLY)
> -    /* start in user mode with interrupts enabled.  */
> -    env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
>      env->pvr.regs[10] = 0x0c000000; /* Spartan 3a dsp.  */
> -#else
> -    env->sregs[SR_MSR] = 0;
> -    mmu_init(&env->mmu);
> -    env->mmu.c_mmu = 3;
> -    env->mmu.c_mmu_tlb_access = 3;
> -    env->mmu.c_mmu_zones = 16;
>  #endif
> -}
> -
> -static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
> -{
> -    CPUState *cs = CPU(dev);
> -    MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
> -
> -    cpu_reset(cs);
> -    qemu_init_vcpu(cs);
>  
>      mcc->parent_realize(dev, errp);
>  }
> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
> index 4ea04ac..e4c1cde 100644
> --- a/target-microblaze/cpu.h
> +++ b/target-microblaze/cpu.h
> @@ -260,16 +260,18 @@ struct CPUMBState {
>  #define IFLAGS_TB_MASK  (D_FLAG | IMM_FLAG | DRTI_FLAG | DRTE_FLAG | DRTB_FLAG)
>      uint32_t iflags;
>  
> -    struct {
> -        uint32_t regs[16];
> -    } pvr;
> -
>  #if !defined(CONFIG_USER_ONLY)
>      /* Unified MMU.  */
>      struct microblaze_mmu mmu;
>  #endif
>  
>      CPU_COMMON
> +
> +    /* These fields are preserved on reset.  */
> +
> +    struct {
> +        uint32_t regs[16];
> +    } pvr;
>  };
>  
>  #include "cpu-qom.h"
> -- 
> 1.7.1
> 

[Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Alistair Francis]

Microblaze stack protection is configurable and isn't always enabled.
This patch allows the stack protection to be disabled/enabled from the
CPU properties.

The stack protection is disabled by default as by default the Microblaze
machines enable the MMU and stack protection can't be enabled if the
MMU is.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
---
V2:
 - Change the variable name to stackprot
 - Include protection for the second time stack protection
   is enabled
 - Disable stack protection by default
Changes since RFC:
 - Move the cfg.stackproc check into translate.c
 - Set the PVR register

 target-microblaze/cpu-qom.h   |    5 +++++
 target-microblaze/cpu.c       |    5 +++++
 target-microblaze/cpu.h       |    1 +
 target-microblaze/translate.c |    4 ++--
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
index e3e0701..e08adb9 100644
--- a/target-microblaze/cpu-qom.h
+++ b/target-microblaze/cpu-qom.h
@@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
     uint32_t base_vectors;
     /*< public >*/
 
+    /* Microblaze Configuration Settings */
+    struct {
+        bool stackprot;
+    } cfg;
+
     CPUMBState env;
 } MicroBlazeCPU;
 
diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
index 95be540..ead2fcd 100644
--- a/target-microblaze/cpu.c
+++ b/target-microblaze/cpu.c
@@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
                         | PVR2_USE_FPU2_MASK \
                         | PVR2_FPU_EXC_MASK \
                         | 0;
+
+    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
+
     env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
     env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
 
@@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
 
 static Property mb_properties[] = {
     DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
+    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
+                     false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
index e4c1cde..481f463 100644
--- a/target-microblaze/cpu.h
+++ b/target-microblaze/cpu.h
@@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
 #define PVR0_FAULT			0x00100000
 #define PVR0_VERSION_MASK               0x0000FF00
 #define PVR0_USER1_MASK                 0x000000FF
+#define PVR0_SPROT_MASK                 0x00000001
 
 /* User 2 PVR mask */
 #define PVR1_USER2_MASK                 0xFFFFFFFF
diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
index 4068946..bd10b40 100644
--- a/target-microblaze/translate.c
+++ b/target-microblaze/translate.c
@@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
     int stackprot = 0;
 
     /* All load/stores use ra.  */
-    if (dc->ra == 1) {
+    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
         stackprot = 1;
     }
 
@@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
             return &cpu_R[dc->ra];
         }
 
-        if (dc->rb == 1) {
+        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
             stackprot = 1;
         }
 
-- 
1.7.1

Re: [Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Edgar E. Iglesias]

On Thu, May 28, 2015 at 03:37:42PM +1000, Alistair Francis wrote:
> Microblaze stack protection is configurable and isn't always enabled.
> This patch allows the stack protection to be disabled/enabled from the
> CPU properties.
> 
> The stack protection is disabled by default as by default the Microblaze
> machines enable the MMU and stack protection can't be enabled if the
> MMU is.
> 
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>

Hi Alistair,


> ---
> V2:
>  - Change the variable name to stackprot
>  - Include protection for the second time stack protection
>    is enabled
>  - Disable stack protection by default
> Changes since RFC:
>  - Move the cfg.stackproc check into translate.c
>  - Set the PVR register
> 
>  target-microblaze/cpu-qom.h   |    5 +++++
>  target-microblaze/cpu.c       |    5 +++++
>  target-microblaze/cpu.h       |    1 +
>  target-microblaze/translate.c |    4 ++--
>  4 files changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
> index e3e0701..e08adb9 100644
> --- a/target-microblaze/cpu-qom.h
> +++ b/target-microblaze/cpu-qom.h
> @@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
>      uint32_t base_vectors;
>      /*< public >*/
>  
> +    /* Microblaze Configuration Settings */
> +    struct {
> +        bool stackprot;
> +    } cfg;
> +
>      CPUMBState env;
>  } MicroBlazeCPU;
>  
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index 95be540..ead2fcd 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>                          | PVR2_USE_FPU2_MASK \
>                          | PVR2_FPU_EXC_MASK \
>                          | 0;
> +
> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);

Could you please skip the parentheses.

> +
>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>  
> @@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
>  
>  static Property mb_properties[] = {
>      DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
> +    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
> +                     false),

I think the change to default false should be done in a separate patch
as it changes the function behaviour of the default CPU.




>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
> index e4c1cde..481f463 100644
> --- a/target-microblaze/cpu.h
> +++ b/target-microblaze/cpu.h
> @@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
>  #define PVR0_FAULT			0x00100000
>  #define PVR0_VERSION_MASK               0x0000FF00
>  #define PVR0_USER1_MASK                 0x000000FF
> +#define PVR0_SPROT_MASK                 0x00000001
>  
>  /* User 2 PVR mask */
>  #define PVR1_USER2_MASK                 0xFFFFFFFF
> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> index 4068946..bd10b40 100644
> --- a/target-microblaze/translate.c
> +++ b/target-microblaze/translate.c
> @@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>      int stackprot = 0;
>  
>      /* All load/stores use ra.  */
> -    if (dc->ra == 1) {
> +    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
>          stackprot = 1;
>      }
>  
> @@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>              return &cpu_R[dc->ra];
>          }
>  
> -        if (dc->rb == 1) {
> +        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
>              stackprot = 1;
>          }
>  
> -- 
> 1.7.1
> 

Re: [Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Alistair Francis]

On Thu, May 28, 2015 at 4:17 PM, Edgar E. Iglesias
<edgar.iglesias@xilinx.com> wrote:
> On Thu, May 28, 2015 at 03:37:42PM +1000, Alistair Francis wrote:
>> Microblaze stack protection is configurable and isn't always enabled.
>> This patch allows the stack protection to be disabled/enabled from the
>> CPU properties.
>>
>> The stack protection is disabled by default as by default the Microblaze
>> machines enable the MMU and stack protection can't be enabled if the
>> MMU is.
>>
>> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
>
> Hi Alistair,
>
>
>> ---
>> V2:
>>  - Change the variable name to stackprot
>>  - Include protection for the second time stack protection
>>    is enabled
>>  - Disable stack protection by default
>> Changes since RFC:
>>  - Move the cfg.stackproc check into translate.c
>>  - Set the PVR register
>>
>>  target-microblaze/cpu-qom.h   |    5 +++++
>>  target-microblaze/cpu.c       |    5 +++++
>>  target-microblaze/cpu.h       |    1 +
>>  target-microblaze/translate.c |    4 ++--
>>  4 files changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
>> index e3e0701..e08adb9 100644
>> --- a/target-microblaze/cpu-qom.h
>> +++ b/target-microblaze/cpu-qom.h
>> @@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
>>      uint32_t base_vectors;
>>      /*< public >*/
>>
>> +    /* Microblaze Configuration Settings */
>> +    struct {
>> +        bool stackprot;
>> +    } cfg;
>> +
>>      CPUMBState env;
>>  } MicroBlazeCPU;
>>
>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
>> index 95be540..ead2fcd 100644
>> --- a/target-microblaze/cpu.c
>> +++ b/target-microblaze/cpu.c
>> @@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>>                          | PVR2_USE_FPU2_MASK \
>>                          | PVR2_FPU_EXC_MASK \
>>                          | 0;
>> +
>> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
>
> Could you please skip the parentheses.

Hey Edgar,

Yeah I will. They get re-added straight away, which is why I left them in.

>
>> +
>>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>>
>> @@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
>>
>>  static Property mb_properties[] = {
>>      DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
>> +    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>> +                     false),
>
> I think the change to default false should be done in a separate patch
> as it changes the function behaviour of the default CPU.

Fair enough. I will leave it here and add a patch at the end that disables it.

Thanks,

Alistair

>
>
>
>
>>      DEFINE_PROP_END_OF_LIST(),
>>  };
>>
>> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
>> index e4c1cde..481f463 100644
>> --- a/target-microblaze/cpu.h
>> +++ b/target-microblaze/cpu.h
>> @@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
>>  #define PVR0_FAULT                   0x00100000
>>  #define PVR0_VERSION_MASK               0x0000FF00
>>  #define PVR0_USER1_MASK                 0x000000FF
>> +#define PVR0_SPROT_MASK                 0x00000001
>>
>>  /* User 2 PVR mask */
>>  #define PVR1_USER2_MASK                 0xFFFFFFFF
>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
>> index 4068946..bd10b40 100644
>> --- a/target-microblaze/translate.c
>> +++ b/target-microblaze/translate.c
>> @@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>>      int stackprot = 0;
>>
>>      /* All load/stores use ra.  */
>> -    if (dc->ra == 1) {
>> +    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
>>          stackprot = 1;
>>      }
>>
>> @@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>>              return &cpu_R[dc->ra];
>>          }
>>
>> -        if (dc->rb == 1) {
>> +        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
>>              stackprot = 1;
>>          }
>>
>> --
>> 1.7.1
>>
>

Re: [Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Alistair Francis]

On Fri, May 29, 2015 at 3:35 PM, Alistair Francis
<alistair.francis@xilinx.com> wrote:
> On Thu, May 28, 2015 at 4:17 PM, Edgar E. Iglesias
> <edgar.iglesias@xilinx.com> wrote:
>> On Thu, May 28, 2015 at 03:37:42PM +1000, Alistair Francis wrote:
>>> Microblaze stack protection is configurable and isn't always enabled.
>>> This patch allows the stack protection to be disabled/enabled from the
>>> CPU properties.
>>>
>>> The stack protection is disabled by default as by default the Microblaze
>>> machines enable the MMU and stack protection can't be enabled if the
>>> MMU is.
>>>
>>> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
>>
>> Hi Alistair,
>>
>>
>>> ---
>>> V2:
>>>  - Change the variable name to stackprot
>>>  - Include protection for the second time stack protection
>>>    is enabled
>>>  - Disable stack protection by default
>>> Changes since RFC:
>>>  - Move the cfg.stackproc check into translate.c
>>>  - Set the PVR register
>>>
>>>  target-microblaze/cpu-qom.h   |    5 +++++
>>>  target-microblaze/cpu.c       |    5 +++++
>>>  target-microblaze/cpu.h       |    1 +
>>>  target-microblaze/translate.c |    4 ++--
>>>  4 files changed, 13 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
>>> index e3e0701..e08adb9 100644
>>> --- a/target-microblaze/cpu-qom.h
>>> +++ b/target-microblaze/cpu-qom.h
>>> @@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
>>>      uint32_t base_vectors;
>>>      /*< public >*/
>>>
>>> +    /* Microblaze Configuration Settings */
>>> +    struct {
>>> +        bool stackprot;
>>> +    } cfg;
>>> +
>>>      CPUMBState env;
>>>  } MicroBlazeCPU;
>>>
>>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
>>> index 95be540..ead2fcd 100644
>>> --- a/target-microblaze/cpu.c
>>> +++ b/target-microblaze/cpu.c
>>> @@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>>>                          | PVR2_USE_FPU2_MASK \
>>>                          | PVR2_FPU_EXC_MASK \
>>>                          | 0;
>>> +
>>> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
>>
>> Could you please skip the parentheses.
>
> Hey Edgar,
>
> Yeah I will. They get re-added straight away, which is why I left them in.
>
>>
>>> +
>>>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>>>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>>>
>>> @@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
>>>
>>>  static Property mb_properties[] = {
>>>      DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
>>> +    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>>> +                     false),
>>
>> I think the change to default false should be done in a separate patch
>> as it changes the function behaviour of the default CPU.
>
> Fair enough. I will leave it here and add a patch at the end that disables it.

On that note, should the current machines enable it?

It has always been enabled for them, but they do support MMU's so it
should be disabled.

Thanks,

Alistair

>
> Thanks,
>
> Alistair
>
>>
>>
>>
>>
>>>      DEFINE_PROP_END_OF_LIST(),
>>>  };
>>>
>>> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
>>> index e4c1cde..481f463 100644
>>> --- a/target-microblaze/cpu.h
>>> +++ b/target-microblaze/cpu.h
>>> @@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
>>>  #define PVR0_FAULT                   0x00100000
>>>  #define PVR0_VERSION_MASK               0x0000FF00
>>>  #define PVR0_USER1_MASK                 0x000000FF
>>> +#define PVR0_SPROT_MASK                 0x00000001
>>>
>>>  /* User 2 PVR mask */
>>>  #define PVR1_USER2_MASK                 0xFFFFFFFF
>>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
>>> index 4068946..bd10b40 100644
>>> --- a/target-microblaze/translate.c
>>> +++ b/target-microblaze/translate.c
>>> @@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>>>      int stackprot = 0;
>>>
>>>      /* All load/stores use ra.  */
>>> -    if (dc->ra == 1) {
>>> +    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
>>>          stackprot = 1;
>>>      }
>>>
>>> @@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>>>              return &cpu_R[dc->ra];
>>>          }
>>>
>>> -        if (dc->rb == 1) {
>>> +        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
>>>              stackprot = 1;
>>>          }
>>>
>>> --
>>> 1.7.1
>>>
>>

Re: [Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Edgar E. Iglesias]

On Fri, May 29, 2015 at 03:39:32PM +1000, Alistair Francis wrote:
> On Fri, May 29, 2015 at 3:35 PM, Alistair Francis
> <alistair.francis@xilinx.com> wrote:
> > On Thu, May 28, 2015 at 4:17 PM, Edgar E. Iglesias
> > <edgar.iglesias@xilinx.com> wrote:
> >> On Thu, May 28, 2015 at 03:37:42PM +1000, Alistair Francis wrote:
> >>> Microblaze stack protection is configurable and isn't always enabled.
> >>> This patch allows the stack protection to be disabled/enabled from the
> >>> CPU properties.
> >>>
> >>> The stack protection is disabled by default as by default the Microblaze
> >>> machines enable the MMU and stack protection can't be enabled if the
> >>> MMU is.
> >>>
> >>> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> >>
> >> Hi Alistair,
> >>
> >>
> >>> ---
> >>> V2:
> >>>  - Change the variable name to stackprot
> >>>  - Include protection for the second time stack protection
> >>>    is enabled
> >>>  - Disable stack protection by default
> >>> Changes since RFC:
> >>>  - Move the cfg.stackproc check into translate.c
> >>>  - Set the PVR register
> >>>
> >>>  target-microblaze/cpu-qom.h   |    5 +++++
> >>>  target-microblaze/cpu.c       |    5 +++++
> >>>  target-microblaze/cpu.h       |    1 +
> >>>  target-microblaze/translate.c |    4 ++--
> >>>  4 files changed, 13 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
> >>> index e3e0701..e08adb9 100644
> >>> --- a/target-microblaze/cpu-qom.h
> >>> +++ b/target-microblaze/cpu-qom.h
> >>> @@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
> >>>      uint32_t base_vectors;
> >>>      /*< public >*/
> >>>
> >>> +    /* Microblaze Configuration Settings */
> >>> +    struct {
> >>> +        bool stackprot;
> >>> +    } cfg;
> >>> +
> >>>      CPUMBState env;
> >>>  } MicroBlazeCPU;
> >>>
> >>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> >>> index 95be540..ead2fcd 100644
> >>> --- a/target-microblaze/cpu.c
> >>> +++ b/target-microblaze/cpu.c
> >>> @@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
> >>>                          | PVR2_USE_FPU2_MASK \
> >>>                          | PVR2_FPU_EXC_MASK \
> >>>                          | 0;
> >>> +
> >>> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
> >>
> >> Could you please skip the parentheses.
> >
> > Hey Edgar,
> >
> > Yeah I will. They get re-added straight away, which is why I left them in.
> >
> >>
> >>> +
> >>>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
> >>>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
> >>>
> >>> @@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
> >>>
> >>>  static Property mb_properties[] = {
> >>>      DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
> >>> +    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
> >>> +                     false),
> >>
> >> I think the change to default false should be done in a separate patch
> >> as it changes the function behaviour of the default CPU.
> >
> > Fair enough. I will leave it here and add a patch at the end that disables it.
> 
> On that note, should the current machines enable it?
> 
> It has always been enabled for them, but they do support MMU's so it
> should be disabled.


Right, stackprot should be disabled as the MMU is on.
I wasn't aware that the stackprot was not used in combination with
the MMU at the time...

Cheers,
Edgar


> 
> Thanks,
> 
> Alistair
> 
> >
> > Thanks,
> >
> > Alistair
> >
> >>
> >>
> >>
> >>
> >>>      DEFINE_PROP_END_OF_LIST(),
> >>>  };
> >>>
> >>> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
> >>> index e4c1cde..481f463 100644
> >>> --- a/target-microblaze/cpu.h
> >>> +++ b/target-microblaze/cpu.h
> >>> @@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
> >>>  #define PVR0_FAULT                   0x00100000
> >>>  #define PVR0_VERSION_MASK               0x0000FF00
> >>>  #define PVR0_USER1_MASK                 0x000000FF
> >>> +#define PVR0_SPROT_MASK                 0x00000001
> >>>
> >>>  /* User 2 PVR mask */
> >>>  #define PVR1_USER2_MASK                 0xFFFFFFFF
> >>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> >>> index 4068946..bd10b40 100644
> >>> --- a/target-microblaze/translate.c
> >>> +++ b/target-microblaze/translate.c
> >>> @@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
> >>>      int stackprot = 0;
> >>>
> >>>      /* All load/stores use ra.  */
> >>> -    if (dc->ra == 1) {
> >>> +    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
> >>>          stackprot = 1;
> >>>      }
> >>>
> >>> @@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
> >>>              return &cpu_R[dc->ra];
> >>>          }
> >>>
> >>> -        if (dc->rb == 1) {
> >>> +        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
> >>>              stackprot = 1;
> >>>          }
> >>>
> >>> --
> >>> 1.7.1
> >>>
> >>

Re: [Qemu-devel] [PATCH v2 3/5] target-microblaze: Allow the stack protection to be disabled/enabled

[Alistair Francis]

On Fri, May 29, 2015 at 3:42 PM, Edgar E. Iglesias
<edgar.iglesias@xilinx.com> wrote:
> On Fri, May 29, 2015 at 03:39:32PM +1000, Alistair Francis wrote:
>> On Fri, May 29, 2015 at 3:35 PM, Alistair Francis
>> <alistair.francis@xilinx.com> wrote:
>> > On Thu, May 28, 2015 at 4:17 PM, Edgar E. Iglesias
>> > <edgar.iglesias@xilinx.com> wrote:
>> >> On Thu, May 28, 2015 at 03:37:42PM +1000, Alistair Francis wrote:
>> >>> Microblaze stack protection is configurable and isn't always enabled.
>> >>> This patch allows the stack protection to be disabled/enabled from the
>> >>> CPU properties.
>> >>>
>> >>> The stack protection is disabled by default as by default the Microblaze
>> >>> machines enable the MMU and stack protection can't be enabled if the
>> >>> MMU is.
>> >>>
>> >>> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
>> >>
>> >> Hi Alistair,
>> >>
>> >>
>> >>> ---
>> >>> V2:
>> >>>  - Change the variable name to stackprot
>> >>>  - Include protection for the second time stack protection
>> >>>    is enabled
>> >>>  - Disable stack protection by default
>> >>> Changes since RFC:
>> >>>  - Move the cfg.stackproc check into translate.c
>> >>>  - Set the PVR register
>> >>>
>> >>>  target-microblaze/cpu-qom.h   |    5 +++++
>> >>>  target-microblaze/cpu.c       |    5 +++++
>> >>>  target-microblaze/cpu.h       |    1 +
>> >>>  target-microblaze/translate.c |    4 ++--
>> >>>  4 files changed, 13 insertions(+), 2 deletions(-)
>> >>>
>> >>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
>> >>> index e3e0701..e08adb9 100644
>> >>> --- a/target-microblaze/cpu-qom.h
>> >>> +++ b/target-microblaze/cpu-qom.h
>> >>> @@ -59,6 +59,11 @@ typedef struct MicroBlazeCPU {
>> >>>      uint32_t base_vectors;
>> >>>      /*< public >*/
>> >>>
>> >>> +    /* Microblaze Configuration Settings */
>> >>> +    struct {
>> >>> +        bool stackprot;
>> >>> +    } cfg;
>> >>> +
>> >>>      CPUMBState env;
>> >>>  } MicroBlazeCPU;
>> >>>
>> >>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
>> >>> index 95be540..ead2fcd 100644
>> >>> --- a/target-microblaze/cpu.c
>> >>> +++ b/target-microblaze/cpu.c
>> >>> @@ -114,6 +114,9 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>> >>>                          | PVR2_USE_FPU2_MASK \
>> >>>                          | PVR2_FPU_EXC_MASK \
>> >>>                          | 0;
>> >>> +
>> >>> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
>> >>
>> >> Could you please skip the parentheses.
>> >
>> > Hey Edgar,
>> >
>> > Yeah I will. They get re-added straight away, which is why I left them in.
>> >
>> >>
>> >>> +
>> >>>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>> >>>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>> >>>
>> >>> @@ -156,6 +159,8 @@ static const VMStateDescription vmstate_mb_cpu = {
>> >>>
>> >>>  static Property mb_properties[] = {
>> >>>      DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
>> >>> +    DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>> >>> +                     false),
>> >>
>> >> I think the change to default false should be done in a separate patch
>> >> as it changes the function behaviour of the default CPU.
>> >
>> > Fair enough. I will leave it here and add a patch at the end that disables it.
>>
>> On that note, should the current machines enable it?
>>
>> It has always been enabled for them, but they do support MMU's so it
>> should be disabled.
>
>
> Right, stackprot should be disabled as the MMU is on.
> I wasn't aware that the stackprot was not used in combination with
> the MMU at the time...

Ok, I will disable it by default and for all of the current machines.

Thanks,

Alistair

>
> Cheers,
> Edgar
>
>
>>
>> Thanks,
>>
>> Alistair
>>
>> >
>> > Thanks,
>> >
>> > Alistair
>> >
>> >>
>> >>
>> >>
>> >>
>> >>>      DEFINE_PROP_END_OF_LIST(),
>> >>>  };
>> >>>
>> >>> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
>> >>> index e4c1cde..481f463 100644
>> >>> --- a/target-microblaze/cpu.h
>> >>> +++ b/target-microblaze/cpu.h
>> >>> @@ -128,6 +128,7 @@ typedef struct CPUMBState CPUMBState;
>> >>>  #define PVR0_FAULT                   0x00100000
>> >>>  #define PVR0_VERSION_MASK               0x0000FF00
>> >>>  #define PVR0_USER1_MASK                 0x000000FF
>> >>> +#define PVR0_SPROT_MASK                 0x00000001
>> >>>
>> >>>  /* User 2 PVR mask */
>> >>>  #define PVR1_USER2_MASK                 0xFFFFFFFF
>> >>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
>> >>> index 4068946..bd10b40 100644
>> >>> --- a/target-microblaze/translate.c
>> >>> +++ b/target-microblaze/translate.c
>> >>> @@ -862,7 +862,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>> >>>      int stackprot = 0;
>> >>>
>> >>>      /* All load/stores use ra.  */
>> >>> -    if (dc->ra == 1) {
>> >>> +    if (dc->ra == 1 && dc->cpu->cfg.stackprot) {
>> >>>          stackprot = 1;
>> >>>      }
>> >>>
>> >>> @@ -875,7 +875,7 @@ static inline TCGv *compute_ldst_addr(DisasContext *dc, TCGv *t)
>> >>>              return &cpu_R[dc->ra];
>> >>>          }
>> >>>
>> >>> -        if (dc->rb == 1) {
>> >>> +        if (dc->rb == 1 && dc->cpu->cfg.stackprot) {
>> >>>              stackprot = 1;
>> >>>          }
>> >>>
>> >>> --
>> >>> 1.7.1
>> >>>
>> >>
>

[Qemu-devel] [PATCH v2 4/5] target-microblaze: Tidy up the base-vectors property

[Alistair Francis]

Rename the "xlnx.base-vectors" string to "base-vectors" and
move the base_vectors variable into the cfg struct.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---

 target-microblaze/cpu-qom.h |    3 ++-
 target-microblaze/cpu.c     |    4 ++--
 target-microblaze/helper.c  |    8 ++++----
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
index e08adb9..dd04199 100644
--- a/target-microblaze/cpu-qom.h
+++ b/target-microblaze/cpu-qom.h
@@ -56,12 +56,13 @@ typedef struct MicroBlazeCPUClass {
 typedef struct MicroBlazeCPU {
     /*< private >*/
     CPUState parent_obj;
-    uint32_t base_vectors;
+
     /*< public >*/
 
     /* Microblaze Configuration Settings */
     struct {
         bool stackprot;
+        uint32_t base_vectors;
     } cfg;
 
     CPUMBState env;
diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
index ead2fcd..aefdd7a 100644
--- a/target-microblaze/cpu.c
+++ b/target-microblaze/cpu.c
@@ -120,7 +120,7 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
     env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
     env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
 
-    env->sregs[SR_PC] = cpu->base_vectors;
+    env->sregs[SR_PC] = cpu->cfg.base_vectors;
 
 #if defined(CONFIG_USER_ONLY)
     env->pvr.regs[10] = 0x0c000000; /* Spartan 3a dsp.  */
@@ -158,7 +158,7 @@ static const VMStateDescription vmstate_mb_cpu = {
 };
 
 static Property mb_properties[] = {
-    DEFINE_PROP_UINT32("xlnx.base-vectors", MicroBlazeCPU, base_vectors, 0),
+    DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
     DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
                      false),
     DEFINE_PROP_END_OF_LIST(),
diff --git a/target-microblaze/helper.c b/target-microblaze/helper.c
index 32896f4..69c3252 100644
--- a/target-microblaze/helper.c
+++ b/target-microblaze/helper.c
@@ -154,7 +154,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
                           env->sregs[SR_ESR], env->iflags);
             log_cpu_state_mask(CPU_LOG_INT, cs, 0);
             env->iflags &= ~(IMM_FLAG | D_FLAG);
-            env->sregs[SR_PC] = cpu->base_vectors + 0x20;
+            env->sregs[SR_PC] = cpu->cfg.base_vectors + 0x20;
             break;
 
         case EXCP_MMU:
@@ -194,7 +194,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
                           env->sregs[SR_PC], env->sregs[SR_EAR], env->iflags);
             log_cpu_state_mask(CPU_LOG_INT, cs, 0);
             env->iflags &= ~(IMM_FLAG | D_FLAG);
-            env->sregs[SR_PC] = cpu->base_vectors + 0x20;
+            env->sregs[SR_PC] = cpu->cfg.base_vectors + 0x20;
             break;
 
         case EXCP_IRQ:
@@ -235,7 +235,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
             env->sregs[SR_MSR] |= t;
 
             env->regs[14] = env->sregs[SR_PC];
-            env->sregs[SR_PC] = cpu->base_vectors + 0x10;
+            env->sregs[SR_PC] = cpu->cfg.base_vectors + 0x10;
             //log_cpu_state_mask(CPU_LOG_INT, cs, 0);
             break;
 
@@ -254,7 +254,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
             if (cs->exception_index == EXCP_HW_BREAK) {
                 env->regs[16] = env->sregs[SR_PC];
                 env->sregs[SR_MSR] |= MSR_BIP;
-                env->sregs[SR_PC] = cpu->base_vectors + 0x18;
+                env->sregs[SR_PC] = cpu->cfg.base_vectors + 0x18;
             } else
                 env->sregs[SR_PC] = env->btarget;
             break;
-- 
1.7.1

[Qemu-devel] [PATCH v2 5/5] target-microblaze: Convert use-fpu to a CPU property

[Alistair Francis]

Originally the use-fpu PVR bits were manually set for each machine. This
is a hassle and difficult to read, instead set them based on the CPU
properties.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
V2:
 - Remove unnecessary declaration of r
Changes since RFC:
 - Tidy up the if logic

 hw/microblaze/petalogix_ml605_mmu.c |    4 ++--
 target-microblaze/cpu-qom.h         |    1 +
 target-microblaze/cpu.c             |    9 ++++++---
 target-microblaze/translate.c       |   10 +++-------
 4 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index 48c264b..a93ca51 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
     env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
     /* setup pvr to match kernel setting */
     env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
-    env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
+    env->pvr.regs[0] |= PVR0_ENDI;
     env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
-    env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
     env->pvr.regs[4] = 0xc56b8000;
     env->pvr.regs[5] = 0xc56be000;
 }
@@ -95,6 +94,7 @@ petalogix_ml605_init(MachineState *machine)
 
     /* init CPUs */
     cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
+    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
     object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
 
     /* Attach emulated BRAM through the LMB.  */
diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
index dd04199..a6474f9 100644
--- a/target-microblaze/cpu-qom.h
+++ b/target-microblaze/cpu-qom.h
@@ -63,6 +63,7 @@ typedef struct MicroBlazeCPU {
     struct {
         bool stackprot;
         uint32_t base_vectors;
+        uint8_t usefpu;
     } cfg;
 
     CPUMBState env;
diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
index aefdd7a..20c4b9b 100644
--- a/target-microblaze/cpu.c
+++ b/target-microblaze/cpu.c
@@ -110,12 +110,14 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
                         | PVR2_USE_DIV_MASK \
                         | PVR2_USE_HW_MUL_MASK \
                         | PVR2_USE_MUL64_MASK \
-                        | PVR2_USE_FPU_MASK \
-                        | PVR2_USE_FPU2_MASK \
                         | PVR2_FPU_EXC_MASK \
                         | 0;
 
-    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
+    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0) |
+                        (cpu->cfg.usefpu ? PVR0_USE_FPU_MASK : 0);
+
+    env->pvr.regs[2] |= (cpu->cfg.usefpu ? PVR2_USE_FPU_MASK : 0) |
+                        (cpu->cfg.usefpu > 1 ? PVR2_USE_FPU2_MASK : 0);
 
     env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
     env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
@@ -161,6 +163,7 @@ static Property mb_properties[] = {
     DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
     DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
                      false),
+    DEFINE_PROP_UINT8("use-fpu", MicroBlazeCPU, cfg.usefpu, 2),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
index bd10b40..8187700 100644
--- a/target-microblaze/translate.c
+++ b/target-microblaze/translate.c
@@ -1411,15 +1411,11 @@ static void dec_rts(DisasContext *dc)
 
 static int dec_check_fpuv2(DisasContext *dc)
 {
-    int r;
-
-    r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
-
-    if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
+    if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
         tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
         t_gen_raise_exception(dc, EXCP_HW_EXCP);
     }
-    return r;
+    return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
 }
 
 static void dec_fpu(DisasContext *dc)
@@ -1428,7 +1424,7 @@ static void dec_fpu(DisasContext *dc)
 
     if ((dc->tb_flags & MSR_EE_FLAG)
           && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
-          && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
+          && (dc->cpu->cfg.usefpu != 1)) {
         tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
         t_gen_raise_exception(dc, EXCP_HW_EXCP);
         return;
-- 
1.7.1

Re: [Qemu-devel] [PATCH v2 5/5] target-microblaze: Convert use-fpu to a CPU property

[Edgar E. Iglesias]

On Thu, May 28, 2015 at 03:38:59PM +1000, Alistair Francis wrote:
> Originally the use-fpu PVR bits were manually set for each machine. This
> is a hassle and difficult to read, instead set them based on the CPU
> properties.
> 
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> ---
> V2:
>  - Remove unnecessary declaration of r
> Changes since RFC:
>  - Tidy up the if logic
> 
>  hw/microblaze/petalogix_ml605_mmu.c |    4 ++--
>  target-microblaze/cpu-qom.h         |    1 +
>  target-microblaze/cpu.c             |    9 ++++++---
>  target-microblaze/translate.c       |   10 +++-------
>  4 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
> index 48c264b..a93ca51 100644
> --- a/hw/microblaze/petalogix_ml605_mmu.c
> +++ b/hw/microblaze/petalogix_ml605_mmu.c
> @@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
>      env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
>      /* setup pvr to match kernel setting */
>      env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
> -    env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
> +    env->pvr.regs[0] |= PVR0_ENDI;
>      env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
> -    env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
>      env->pvr.regs[4] = 0xc56b8000;
>      env->pvr.regs[5] = 0xc56be000;
>  }
> @@ -95,6 +94,7 @@ petalogix_ml605_init(MachineState *machine)
>  
>      /* init CPUs */
>      cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
> +    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);


Can you please add a comment on the values of use-fpu?


>      object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
>  
>      /* Attach emulated BRAM through the LMB.  */
> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
> index dd04199..a6474f9 100644
> --- a/target-microblaze/cpu-qom.h
> +++ b/target-microblaze/cpu-qom.h
> @@ -63,6 +63,7 @@ typedef struct MicroBlazeCPU {
>      struct {
>          bool stackprot;
>          uint32_t base_vectors;
> +        uint8_t usefpu;
>      } cfg;
>  
>      CPUMBState env;
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index aefdd7a..20c4b9b 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -110,12 +110,14 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>                          | PVR2_USE_DIV_MASK \
>                          | PVR2_USE_HW_MUL_MASK \
>                          | PVR2_USE_MUL64_MASK \
> -                        | PVR2_USE_FPU_MASK \
> -                        | PVR2_USE_FPU2_MASK \
>                          | PVR2_FPU_EXC_MASK \
>                          | 0;
>  
> -    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0) |
> +                        (cpu->cfg.usefpu ? PVR0_USE_FPU_MASK : 0);
> +
> +    env->pvr.regs[2] |= (cpu->cfg.usefpu ? PVR2_USE_FPU_MASK : 0) |
> +                        (cpu->cfg.usefpu > 1 ? PVR2_USE_FPU2_MASK : 0);
>  
>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
> @@ -161,6 +163,7 @@ static Property mb_properties[] = {
>      DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
>      DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>                       false),
> +    DEFINE_PROP_UINT8("use-fpu", MicroBlazeCPU, cfg.usefpu, 2),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> index bd10b40..8187700 100644
> --- a/target-microblaze/translate.c
> +++ b/target-microblaze/translate.c
> @@ -1411,15 +1411,11 @@ static void dec_rts(DisasContext *dc)
>  
>  static int dec_check_fpuv2(DisasContext *dc)
>  {
> -    int r;
> -
> -    r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
> -
> -    if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
> +    if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>      }
> -    return r;
> +    return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
>  }
>  
>  static void dec_fpu(DisasContext *dc)
> @@ -1428,7 +1424,7 @@ static void dec_fpu(DisasContext *dc)
>  
>      if ((dc->tb_flags & MSR_EE_FLAG)
>            && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
> -          && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
> +          && (dc->cpu->cfg.usefpu != 1)) {
>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>          return;
> -- 
> 1.7.1
> 

Re: [Qemu-devel] [PATCH v2 5/5] target-microblaze: Convert use-fpu to a CPU property

[Alistair Francis]

On Thu, May 28, 2015 at 4:25 PM, Edgar E. Iglesias
<edgar.iglesias@xilinx.com> wrote:
> On Thu, May 28, 2015 at 03:38:59PM +1000, Alistair Francis wrote:
>> Originally the use-fpu PVR bits were manually set for each machine. This
>> is a hassle and difficult to read, instead set them based on the CPU
>> properties.
>>
>> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
>> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
>> ---
>> V2:
>>  - Remove unnecessary declaration of r
>> Changes since RFC:
>>  - Tidy up the if logic
>>
>>  hw/microblaze/petalogix_ml605_mmu.c |    4 ++--
>>  target-microblaze/cpu-qom.h         |    1 +
>>  target-microblaze/cpu.c             |    9 ++++++---
>>  target-microblaze/translate.c       |   10 +++-------
>>  4 files changed, 12 insertions(+), 12 deletions(-)
>>
>> diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
>> index 48c264b..a93ca51 100644
>> --- a/hw/microblaze/petalogix_ml605_mmu.c
>> +++ b/hw/microblaze/petalogix_ml605_mmu.c
>> @@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
>>      env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
>>      /* setup pvr to match kernel setting */
>>      env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
>> -    env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
>> +    env->pvr.regs[0] |= PVR0_ENDI;
>>      env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
>> -    env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
>>      env->pvr.regs[4] = 0xc56b8000;
>>      env->pvr.regs[5] = 0xc56be000;
>>  }
>> @@ -95,6 +94,7 @@ petalogix_ml605_init(MachineState *machine)
>>
>>      /* init CPUs */
>>      cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
>> +    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
>
>
> Can you please add a comment on the values of use-fpu?

Ok, I will.

Thanks,

Alistair

>
>
>>      object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
>>
>>      /* Attach emulated BRAM through the LMB.  */
>> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
>> index dd04199..a6474f9 100644
>> --- a/target-microblaze/cpu-qom.h
>> +++ b/target-microblaze/cpu-qom.h
>> @@ -63,6 +63,7 @@ typedef struct MicroBlazeCPU {
>>      struct {
>>          bool stackprot;
>>          uint32_t base_vectors;
>> +        uint8_t usefpu;
>>      } cfg;
>>
>>      CPUMBState env;
>> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
>> index aefdd7a..20c4b9b 100644
>> --- a/target-microblaze/cpu.c
>> +++ b/target-microblaze/cpu.c
>> @@ -110,12 +110,14 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
>>                          | PVR2_USE_DIV_MASK \
>>                          | PVR2_USE_HW_MUL_MASK \
>>                          | PVR2_USE_MUL64_MASK \
>> -                        | PVR2_USE_FPU_MASK \
>> -                        | PVR2_USE_FPU2_MASK \
>>                          | PVR2_FPU_EXC_MASK \
>>                          | 0;
>>
>> -    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0);
>> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0) |
>> +                        (cpu->cfg.usefpu ? PVR0_USE_FPU_MASK : 0);
>> +
>> +    env->pvr.regs[2] |= (cpu->cfg.usefpu ? PVR2_USE_FPU_MASK : 0) |
>> +                        (cpu->cfg.usefpu > 1 ? PVR2_USE_FPU2_MASK : 0);
>>
>>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
>> @@ -161,6 +163,7 @@ static Property mb_properties[] = {
>>      DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
>>      DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>>                       false),
>> +    DEFINE_PROP_UINT8("use-fpu", MicroBlazeCPU, cfg.usefpu, 2),
>>      DEFINE_PROP_END_OF_LIST(),
>>  };
>>
>> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
>> index bd10b40..8187700 100644
>> --- a/target-microblaze/translate.c
>> +++ b/target-microblaze/translate.c
>> @@ -1411,15 +1411,11 @@ static void dec_rts(DisasContext *dc)
>>
>>  static int dec_check_fpuv2(DisasContext *dc)
>>  {
>> -    int r;
>> -
>> -    r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
>> -
>> -    if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
>> +    if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
>>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
>>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>>      }
>> -    return r;
>> +    return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
>>  }
>>
>>  static void dec_fpu(DisasContext *dc)
>> @@ -1428,7 +1424,7 @@ static void dec_fpu(DisasContext *dc)
>>
>>      if ((dc->tb_flags & MSR_EE_FLAG)
>>            && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
>> -          && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
>> +          && (dc->cpu->cfg.usefpu != 1)) {
>>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
>>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>>          return;
>> --
>> 1.7.1
>>
>