qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Checkoway <stephen.checkoway@oberlin.edu>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>,
	qemu-block@nongnu.org,
	Stephen Checkoway <stephen.checkoway@oberlin.edu>
Subject: [Qemu-devel] [PATCH v2 00/10] block/pflash_cfi02: Implement missing AMD pflash functionality
Date: Mon,  8 Apr 2019 22:01:21 -0400	[thread overview]
Message-ID: <cover.1554774454.git.stephen.checkoway@oberlin.edu> (raw)

The goal of this patch series implement the following AMD command-set parallel
flash functionality:
- flash interleaving;
- nonuniform sector sizes;
- erase suspend/resume commands; and
- multi-sector erase.

During refactoring and implementation, I discovered several bugs that are
fixed here as well:
- flash commands use only 11-bits of the address in most cases, but the
  current code uses all of them [1];
- entering CFI mode from autoselect mode and then exiting CFI mode should
  return the chip to autoselect mode, but the current code returns to read
  array mode; and
- reset command should be ignored during sector/chip erase, but the current
  code performs the reset.

The first patch in the series adds a test for the existing behavior. Tests for
additional behavior/bug fixes are added in the relevant patch.

1. I found firmware in the wild that relies on the 11-bit address behavior,
   probably due to a bug in the firmware itself.

Changes from v1:
- Fix missing spaces around *, -, and ?.
- Fix missing Signed-off-by line on patch 7
- Replace use of errc with g_printerr and exit

Stephen Checkoway (10):
  block/pflash_cfi02: Add test for supported commands
  block/pflash_cfi02: Refactor, NFC intended
  block/pflash_cfi02: Fix command address comparison
  block/pflash_cfi02: Implement intereleaved flash devices
  block/pflash_cfi02: Implement nonuniform sector sizes
  block/pflash_cfi02: Fix CFI in autoselect mode
  block/pflash_cfi02: Fix reset command not ignored during erase
  block/pflash_cfi02: Implement multi-sector erase
  block/pflash_cfi02: Implement erase suspend/resume
  block/pflash_cfi02: Use the chip erase time specified in the CFI table

 hw/block/pflash_cfi02.c   | 843 +++++++++++++++++++++++++++-----------
 tests/Makefile.include    |   2 +
 tests/pflash-cfi02-test.c | 759 ++++++++++++++++++++++++++++++++++
 3 files changed, 1367 insertions(+), 237 deletions(-)
 create mode 100644 tests/pflash-cfi02-test.c

-- 
2.20.1 (Apple Git-117)

WARNING: multiple messages have this Message-ID (diff)
From: Stephen Checkoway <stephen.checkoway@oberlin.edu>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Stephen Checkoway <stephen.checkoway@oberlin.edu>,
	qemu-block@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v2 00/10] block/pflash_cfi02: Implement missing AMD pflash functionality
Date: Mon,  8 Apr 2019 22:01:21 -0400	[thread overview]
Message-ID: <cover.1554774454.git.stephen.checkoway@oberlin.edu> (raw)
Message-ID: <20190409020121.NyN6g50ii3G5ItIFt34cr6JyDeYvTTNU4tQbmgLa14k@z> (raw)

The goal of this patch series implement the following AMD command-set parallel
flash functionality:
- flash interleaving;
- nonuniform sector sizes;
- erase suspend/resume commands; and
- multi-sector erase.

During refactoring and implementation, I discovered several bugs that are
fixed here as well:
- flash commands use only 11-bits of the address in most cases, but the
  current code uses all of them [1];
- entering CFI mode from autoselect mode and then exiting CFI mode should
  return the chip to autoselect mode, but the current code returns to read
  array mode; and
- reset command should be ignored during sector/chip erase, but the current
  code performs the reset.

The first patch in the series adds a test for the existing behavior. Tests for
additional behavior/bug fixes are added in the relevant patch.

1. I found firmware in the wild that relies on the 11-bit address behavior,
   probably due to a bug in the firmware itself.

Changes from v1:
- Fix missing spaces around *, -, and ?.
- Fix missing Signed-off-by line on patch 7
- Replace use of errc with g_printerr and exit

Stephen Checkoway (10):
  block/pflash_cfi02: Add test for supported commands
  block/pflash_cfi02: Refactor, NFC intended
  block/pflash_cfi02: Fix command address comparison
  block/pflash_cfi02: Implement intereleaved flash devices
  block/pflash_cfi02: Implement nonuniform sector sizes
  block/pflash_cfi02: Fix CFI in autoselect mode
  block/pflash_cfi02: Fix reset command not ignored during erase
  block/pflash_cfi02: Implement multi-sector erase
  block/pflash_cfi02: Implement erase suspend/resume
  block/pflash_cfi02: Use the chip erase time specified in the CFI table

 hw/block/pflash_cfi02.c   | 843 +++++++++++++++++++++++++++-----------
 tests/Makefile.include    |   2 +
 tests/pflash-cfi02-test.c | 759 ++++++++++++++++++++++++++++++++++
 3 files changed, 1367 insertions(+), 237 deletions(-)
 create mode 100644 tests/pflash-cfi02-test.c

-- 
2.20.1 (Apple Git-117)



             reply	other threads:[~2019-04-09  2:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-09  2:01 Stephen Checkoway [this message]
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 00/10] block/pflash_cfi02: Implement missing AMD pflash functionality Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 01/10] block/pflash_cfi02: Add test for supported commands Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 02/10] block/pflash_cfi02: Refactor, NFC intended Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 03/10] block/pflash_cfi02: Fix command address comparison Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 04/10] block/pflash_cfi02: Implement intereleaved flash devices Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 05/10] block/pflash_cfi02: Implement nonuniform sector sizes Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 06/10] block/pflash_cfi02: Fix CFI in autoselect mode Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 07/10] block/pflash_cfi02: Fix reset command not ignored during erase Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 08/10] block/pflash_cfi02: Implement multi-sector erase Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 09/10] block/pflash_cfi02: Implement erase suspend/resume Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway
2019-04-09  2:01 ` [Qemu-devel] [PATCH v2 10/10] block/pflash_cfi02: Use the chip erase time specified in the CFI table Stephen Checkoway
2019-04-09  2:01   ` Stephen Checkoway

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1554774454.git.stephen.checkoway@oberlin.edu \
    --to=stephen.checkoway@oberlin.edu \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).