[PATCH v1 0/6] RISC-V: Add more machine memory

[Alistair Francis <alistair.francis@wdc.com>]

This series aims to improve the use of QEMU for developing boot code. It
does a few things:

 - sifive_u machine:
   - Adds a chunk of memory in the Flash area. This allows boot loaders
   to use this memory. I can't find details on the QSPI flash used on
   the real board, so this is the best bet at the moment.
   - Adds a chunk of memory in the L2-LIM area. This is actualy the L2
   cache and should shrink as the L2 cache is enalbed. Unfortunatley I
   don't see a nice way to shrink this memory.
   - Adds a property that allows users to specify if QEMU should jump to
   flash or DRAM after the ROM code.

 - virt machine:
   - Add the pflash_cfi01 flash device. This is based on the ARM virt
   board implementation
   - Adjusts QEMU to jump to the flash if a user has speciefied any
   pflash.

Both machines have been tested with oreboot, but this should also help
the coreboot developers.

Alistair Francis (6):
  riscv/sifive_u: Add L2-LIM cache memory
  riscv/sifive_u: Add QSPI memory region
  riscv/sifive_u: Manually define the machine
  riscv/sifive_u: Add the start-in-flash property
  riscv/virt: Add the PFlash CFI01 device
  riscv/virt: Jump to pflash if specified

 hw/riscv/Kconfig            |  1 +
 hw/riscv/sifive_u.c         | 77 +++++++++++++++++++++++++++++--
 hw/riscv/virt.c             | 91 ++++++++++++++++++++++++++++++++++++-
 include/hw/riscv/sifive_u.h | 11 ++++-
 include/hw/riscv/virt.h     |  3 ++
 5 files changed, 177 insertions(+), 6 deletions(-)

-- 
2.23.0