From: Akihiko Odaki <akihiko.odaki@gmail.com>
To: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>, qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org,
jasowang@redhat.com, phillip.ennen@gmail.com, armbru@redhat.com,
dirty@apple.com, f4bug@amsat.org, r.bolshakov@yadro.com,
agraf@csgraf.de, phillip@axleos.com, roman@roolebo.dev,
hsp.cat7@gmail.com, hello@adns.io, qemu_oss@crudebyte.com,
eblake@redhat.com, kraxel@redhat.com
Subject: Re: [PATCH v13 2/7] net/vmnet: add vmnet backends to qapi/net
Date: Fri, 14 Jan 2022 17:43:14 +0900 [thread overview]
Message-ID: <d8da9df4-404f-92f3-9dce-e82a39e23802@gmail.com> (raw)
In-Reply-To: <20220113172219.66372-3-yaroshchuk2000@gmail.com>
Hi,
Thank you for fixing the feature availability check.
I decided to just check the series thoroughly before adding Reviewed-By,
and unfortunately ended up finding minor memory leaks and style
problems. I'm sorry for adding comments so late.
Particulalry, his patch has several 2-space indents. They should be
4-space. Reviews for other patch will shortly follow.
Regards,
Akihiko Odaki
On 2022/01/14 2:22, Vladislav Yaroshchuk wrote:
> Create separate netdevs for each vmnet operating mode:
> - vmnet-host
> - vmnet-shared
> - vmnet-bridged
>
> Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> ---
> net/clients.h | 11 ++++
> net/meson.build | 7 +++
> net/net.c | 10 ++++
> net/vmnet-bridged.m | 25 +++++++++
> net/vmnet-common.m | 20 +++++++
> net/vmnet-host.c | 24 ++++++++
> net/vmnet-shared.c | 25 +++++++++
> net/vmnet_int.h | 25 +++++++++
> qapi/net.json | 133 +++++++++++++++++++++++++++++++++++++++++++-
> 9 files changed, 278 insertions(+), 2 deletions(-)
> create mode 100644 net/vmnet-bridged.m
> create mode 100644 net/vmnet-common.m
> create mode 100644 net/vmnet-host.c
> create mode 100644 net/vmnet-shared.c
> create mode 100644 net/vmnet_int.h
>
> diff --git a/net/clients.h b/net/clients.h
> index 92f9b59aed..c9157789f2 100644
> --- a/net/clients.h
> +++ b/net/clients.h
> @@ -63,4 +63,15 @@ int net_init_vhost_user(const Netdev *netdev, const char *name,
>
> int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
> NetClientState *peer, Error **errp);
> +#ifdef CONFIG_VMNET
> +int net_init_vmnet_host(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp);
> +
> +int net_init_vmnet_shared(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp);
> +
> +int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp);
> +#endif /* CONFIG_VMNET */
> +
> #endif /* QEMU_NET_CLIENTS_H */
> diff --git a/net/meson.build b/net/meson.build
> index 847bc2ac85..00a88c4951 100644
> --- a/net/meson.build
> +++ b/net/meson.build
> @@ -42,4 +42,11 @@ softmmu_ss.add(when: 'CONFIG_POSIX', if_true: files(tap_posix))
> softmmu_ss.add(when: 'CONFIG_WIN32', if_true: files('tap-win32.c'))
> softmmu_ss.add(when: 'CONFIG_VHOST_NET_VDPA', if_true: files('vhost-vdpa.c'))
>
> +vmnet_files = files(
> + 'vmnet-common.m',
> + 'vmnet-bridged.m',
> + 'vmnet-host.c',
> + 'vmnet-shared.c'
> +)
> +softmmu_ss.add(when: vmnet, if_true: vmnet_files)
> subdir('can')
> diff --git a/net/net.c b/net/net.c
> index f0d14dbfc1..1dbb64b935 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -1021,6 +1021,11 @@ static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
> #ifdef CONFIG_L2TPV3
> [NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
> #endif
> +#ifdef CONFIG_VMNET
> + [NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
> + [NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
> + [NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
> +#endif /* CONFIG_VMNET */
> };
>
>
> @@ -1106,6 +1111,11 @@ void show_netdevs(void)
> #endif
> #ifdef CONFIG_VHOST_VDPA
> "vhost-vdpa",
> +#endif
> +#ifdef CONFIG_VMNET
> + "vmnet-host",
> + "vmnet-shared",
> + "vmnet-bridged",
> #endif
> };
>
> diff --git a/net/vmnet-bridged.m b/net/vmnet-bridged.m
> new file mode 100644
> index 0000000000..4e42a90391
> --- /dev/null
> +++ b/net/vmnet-bridged.m
> @@ -0,0 +1,25 @@
> +/*
> + * vmnet-bridged.m
> + *
> + * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/qapi-types-net.h"
> +#include "vmnet_int.h"
> +#include "clients.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +
> +#include <vmnet/vmnet.h>
> +
> +int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp)
> +{
> + error_setg(errp, "vmnet-bridged is not implemented yet");
> + return -1;
> +}
> diff --git a/net/vmnet-common.m b/net/vmnet-common.m
> new file mode 100644
> index 0000000000..532d152840
> --- /dev/null
> +++ b/net/vmnet-common.m
> @@ -0,0 +1,20 @@
> +/*
> + * vmnet-common.m - network client wrapper for Apple vmnet.framework
> + *
> + * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> + * Copyright(c) 2021 Phillip Tennen <phillip@axleos.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/qapi-types-net.h"
> +#include "vmnet_int.h"
> +#include "clients.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +
> +#include <vmnet/vmnet.h>
> +
> diff --git a/net/vmnet-host.c b/net/vmnet-host.c
> new file mode 100644
> index 0000000000..4a5ef99dc7
> --- /dev/null
> +++ b/net/vmnet-host.c
> @@ -0,0 +1,24 @@
> +/*
> + * vmnet-host.c
> + *
> + * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/qapi-types-net.h"
> +#include "vmnet_int.h"
> +#include "clients.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +
> +#include <vmnet/vmnet.h>
> +
> +int net_init_vmnet_host(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp) {
> + error_setg(errp, "vmnet-host is not implemented yet");
> + return -1;
> +}
> diff --git a/net/vmnet-shared.c b/net/vmnet-shared.c
> new file mode 100644
> index 0000000000..f8c4a4f3b8
> --- /dev/null
> +++ b/net/vmnet-shared.c
> @@ -0,0 +1,25 @@
> +/*
> + * vmnet-shared.c
> + *
> + * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/qapi-types-net.h"
> +#include "vmnet_int.h"
> +#include "clients.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +
> +#include <vmnet/vmnet.h>
> +
> +int net_init_vmnet_shared(const Netdev *netdev, const char *name,
> + NetClientState *peer, Error **errp)
> +{
> + error_setg(errp, "vmnet-shared is not implemented yet");
> + return -1;
> +}
> diff --git a/net/vmnet_int.h b/net/vmnet_int.h
> new file mode 100644
> index 0000000000..c5982259a4
> --- /dev/null
> +++ b/net/vmnet_int.h
> @@ -0,0 +1,25 @@
> +/*
> + * vmnet_int.h
> + *
> + * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +#ifndef VMNET_INT_H
> +#define VMNET_INT_H
> +
> +#include "qemu/osdep.h"
> +#include "vmnet_int.h"
> +#include "clients.h"
> +
> +#include <vmnet/vmnet.h>
> +
> +typedef struct VmnetCommonState {
> + NetClientState nc;
> +
> +} VmnetCommonState;
> +
> +
> +#endif /* VMNET_INT_H */
> diff --git a/qapi/net.json b/qapi/net.json
> index 7fab2e7cd8..b922e2e34f 100644
> --- a/qapi/net.json
> +++ b/qapi/net.json
> @@ -452,6 +452,120 @@
> '*vhostdev': 'str',
> '*queues': 'int' } }
>
> +##
> +# @NetdevVmnetHostOptions:
> +#
> +# vmnet (host mode) network backend.
> +#
> +# Allows the vmnet interface to communicate with other vmnet
> +# interfaces that are in host mode and also with the host.
> +#
> +# @start-address: The starting IPv4 address to use for the interface.
> +# Must be in the private IP range (RFC 1918). Must be
> +# specified along with @end-address and @subnet-mask.
> +# This address is used as the gateway address. The
> +# subsequent address up to and including end-address are
> +# placed in the DHCP pool.
> +#
> +# @end-address: The DHCP IPv4 range end address to use for the
> +# interface. Must be in the private IP range (RFC 1918).
> +# Must be specified along with @start-address and
> +# @subnet-mask.
> +#
> +# @subnet-mask: The IPv4 subnet mask to use on the interface. Must
> +# be specified along with @start-address and @subnet-mask.
> +#
> +# @isolated: Enable isolation for this interface. Interface isolation
> +# ensures that vmnet interface is not able to communicate
> +# with any other vmnet interfaces. Only communication with
> +# host is allowed. Available since macOS Big Sur 11.0.
> +#
> +# @net-uuid: The identifier (UUID) to uniquely identify the isolated
> +# network vmnet interface should be added to. If
> +# set, no DHCP service is provided for this interface and
> +# network communication is allowed only with other interfaces
> +# added to this network identified by the UUID. Available
> +# since macOS Big Sur 11.0.
> +#
> +# Since: 7.0
> +##
> +{ 'struct': 'NetdevVmnetHostOptions',
> + 'data': {
> + '*start-address': 'str',
> + '*end-address': 'str',
> + '*subnet-mask': 'str',
> + '*isolated': 'bool',
> + '*net-uuid': 'str' },
> + 'if': 'CONFIG_VMNET' }
> +
> +##
> +# @NetdevVmnetSharedOptions:
> +#
> +# vmnet (shared mode) network backend.
> +#
> +# Allows traffic originating from the vmnet interface to reach the
> +# Internet through a network address translator (NAT).
> +# The vmnet interface can communicate with the host and with
> +# other shared mode interfaces on the same subnet. If no DHCP
> +# settings, subnet mask and IPv6 prefix specified, the interface can
> +# communicate with any of other interfaces in shared mode.
> +#
> +# @start-address: The starting IPv4 address to use for the interface.
> +# Must be in the private IP range (RFC 1918). Must be
> +# specified along with @end-address and @subnet-mask.
> +# This address is used as the gateway address. The
> +# subsequent address up to and including end-address are
> +# placed in the DHCP pool.
> +#
> +# @end-address: The DHCP IPv4 range end address to use for the
> +# interface. Must be in the private IP range (RFC 1918).
> +# Must be specified along with @start-address and @subnet-mask.
> +#
> +# @subnet-mask: The IPv4 subnet mask to use on the interface. Must
> +# be specified along with @start-address and @subnet-mask.
> +#
> +# @isolated: Enable isolation for this interface. Interface isolation
> +# ensures that vmnet interface is not able to communicate
> +# with any other vmnet interfaces. Only communication with
> +# host is allowed. Available since macOS Big Sur 11.0.
> +#
> +# @nat66-prefix: The IPv6 prefix to use into guest network. Must be a
> +# unique local address i.e. start with fd00::/8 and have
> +# length of 64.
> +#
> +# Since: 7.0
> +##
> +{ 'struct': 'NetdevVmnetSharedOptions',
> + 'data': {
> + '*start-address': 'str',
> + '*end-address': 'str',
> + '*subnet-mask': 'str',
> + '*isolated': 'bool',
> + '*nat66-prefix': 'str' },
> + 'if': 'CONFIG_VMNET' }
> +
> +##
> +# @NetdevVmnetBridgedOptions:
> +#
> +# vmnet (bridged mode) network backend.
> +#
> +# Bridges the vmnet interface with a physical network interface.
> +#
> +# @ifname: The name of the physical interface to be bridged.
> +#
> +# @isolated: Enable isolation for this interface. Interface isolation
> +# ensures that vmnet interface is not able to communicate
> +# with any other vmnet interfaces. Only communication with
> +# host is allowed. Available since macOS Big Sur 11.0.
> +#
> +# Since: 7.0
> +##
> +{ 'struct': 'NetdevVmnetBridgedOptions',
> + 'data': {
> + 'ifname': 'str',
> + '*isolated': 'bool' },
> + 'if': 'CONFIG_VMNET' }
> +
> ##
> # @NetClientDriver:
> #
> @@ -460,10 +574,16 @@
> # Since: 2.7
> #
> # @vhost-vdpa since 5.1
> +# @vmnet-host since 7.0
> +# @vmnet-shared since 7.0
> +# @vmnet-bridged since 7.0
> ##
> { 'enum': 'NetClientDriver',
> 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
> - 'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa' ] }
> + 'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa',
> + { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' },
> + { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' },
> + { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] }
>
> ##
> # @Netdev:
> @@ -477,6 +597,9 @@
> # Since: 1.2
> #
> # 'l2tpv3' - since 2.1
> +# 'vmnet-host' - since 7.0
> +# 'vmnet-shared' - since 7.0
> +# 'vmnet-bridged' - since 7.0
> ##
> { 'union': 'Netdev',
> 'base': { 'id': 'str', 'type': 'NetClientDriver' },
> @@ -492,7 +615,13 @@
> 'hubport': 'NetdevHubPortOptions',
> 'netmap': 'NetdevNetmapOptions',
> 'vhost-user': 'NetdevVhostUserOptions',
> - 'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
> + 'vhost-vdpa': 'NetdevVhostVDPAOptions',
> + 'vmnet-host': { 'type': 'NetdevVmnetHostOptions',
> + 'if': 'CONFIG_VMNET' },
> + 'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions',
> + 'if': 'CONFIG_VMNET' },
> + 'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions',
> + 'if': 'CONFIG_VMNET' } } }
>
> ##
> # @RxState:
next prev parent reply other threads:[~2022-01-14 8:49 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 17:22 [PATCH v13 0/7] Add vmnet.framework based network backend Vladislav Yaroshchuk
2022-01-13 17:22 ` [PATCH v13 1/7] net/vmnet: add vmnet dependency and customizable option Vladislav Yaroshchuk
2022-01-20 7:14 ` Roman Bolshakov
2022-01-21 11:58 ` Vladislav Yaroshchuk
2022-01-13 17:22 ` [PATCH v13 2/7] net/vmnet: add vmnet backends to qapi/net Vladislav Yaroshchuk
2022-01-14 8:43 ` Akihiko Odaki [this message]
2022-01-15 13:00 ` Vladislav Yaroshchuk
2022-01-18 15:00 ` Markus Armbruster
2022-01-18 16:16 ` Vladislav Yaroshchuk
2022-01-18 16:26 ` Markus Armbruster
2022-01-18 16:46 ` Vladislav Yaroshchuk
2022-01-20 8:32 ` Roman Bolshakov
2022-01-21 12:19 ` Vladislav Yaroshchuk
2022-01-21 13:03 ` Akihiko Odaki
2022-01-28 14:29 ` Vladislav Yaroshchuk
2022-01-28 23:00 ` Akihiko Odaki
2022-01-24 9:56 ` Roman Bolshakov
2022-01-24 11:27 ` Christian Schoenebeck
2022-01-24 17:49 ` Roman Bolshakov
2022-01-24 20:00 ` Christian Schoenebeck
2022-01-24 20:14 ` Peter Maydell
2022-01-24 23:00 ` Roman Bolshakov
2022-01-25 4:14 ` Akihiko Odaki
2022-01-25 10:32 ` Peter Maydell
2022-01-25 11:08 ` Akihiko Odaki
2022-01-25 17:30 ` Christian Schoenebeck
2022-01-29 21:03 ` Roman Bolshakov
2022-01-13 17:22 ` [PATCH v13 3/7] net/vmnet: implement shared mode (vmnet-shared) Vladislav Yaroshchuk
2022-01-14 8:43 ` Akihiko Odaki
2022-01-13 17:22 ` [PATCH v13 4/7] net/vmnet: implement host mode (vmnet-host) Vladislav Yaroshchuk
2022-01-13 17:22 ` [PATCH v13 5/7] net/vmnet: implement bridged mode (vmnet-bridged) Vladislav Yaroshchuk
2022-01-14 8:43 ` Akihiko Odaki
2022-01-13 17:22 ` [PATCH v13 6/7] net/vmnet: update qemu-options.hx Vladislav Yaroshchuk
2022-01-14 8:43 ` Akihiko Odaki
2022-01-13 17:22 ` [PATCH v13 7/7] net/vmnet: update MAINTAINERS list Vladislav Yaroshchuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d8da9df4-404f-92f3-9dce-e82a39e23802@gmail.com \
--to=akihiko.odaki@gmail.com \
--cc=agraf@csgraf.de \
--cc=alex.bennee@linaro.org \
--cc=armbru@redhat.com \
--cc=dirty@apple.com \
--cc=eblake@redhat.com \
--cc=f4bug@amsat.org \
--cc=hello@adns.io \
--cc=hsp.cat7@gmail.com \
--cc=jasowang@redhat.com \
--cc=kraxel@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=phillip.ennen@gmail.com \
--cc=phillip@axleos.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu_oss@crudebyte.com \
--cc=r.bolshakov@yadro.com \
--cc=roman@roolebo.dev \
--cc=yaroshchuk2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).