qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
To: David Gibson <david@gibson.dropbear.id.au>
Cc: aik@ozlabs.ru, qemu-devel@nongnu.org, groug@kaod.org,
	paulus@ozlabs.org, qemu-ppc@nongnu.org, ganeshgr@linux.ibm.com
Subject: Re: [PATCH v14 5/7] ppc: spapr: Handle "ibm, nmi-register" and "ibm,  nmi-interlock" RTAS calls
Date: Wed, 25 Sep 2019 11:34:22 +0530	[thread overview]
Message-ID: <d9aca0a5-da20-733e-5b3c-3c625c00adaa@linux.vnet.ibm.com> (raw)
In-Reply-To: <20190925013355.GH17405@umbus>



On Wednesday 25 September 2019 07:03 AM, David Gibson wrote:
> On Wed, Sep 18, 2019 at 01:42:43PM +0530, Aravinda Prasad wrote:
>> This patch adds support in QEMU to handle "ibm,nmi-register"
>> and "ibm,nmi-interlock" RTAS calls.
>>
>> The machine check notification address is saved when the
>> OS issues "ibm,nmi-register" RTAS call.
>>
>> This patch also handles the case when multiple processors
>> experience machine check at or about the same time by
>> handling "ibm,nmi-interlock" call. In such cases, as per
>> PAPR, subsequent processors serialize waiting for the first
>> processor to issue the "ibm,nmi-interlock" call. The second
>> processor that also received a machine check error waits
>> till the first processor is done reading the error log.
>> The first processor issues "ibm,nmi-interlock" call
>> when the error log is consumed.
>>
>> Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
>> ---
>>  hw/ppc/spapr.c         |    9 ++++++++
>>  hw/ppc/spapr_rtas.c    |   57 ++++++++++++++++++++++++++++++++++++++++++++++++
>>  include/hw/ppc/spapr.h |    5 +++-
>>  3 files changed, 70 insertions(+), 1 deletion(-)
>>
>> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
>> index 9f2e5d2..6992b32 100644
>> --- a/hw/ppc/spapr.c
>> +++ b/hw/ppc/spapr.c
>> @@ -2941,6 +2941,15 @@ static void spapr_machine_init(MachineState *machine)
>>  
>>          /* Resize rtas blob to accommodate error log */
>>          spapr->rtas_size = RTAS_ERROR_LOG_MAX;
>> +
>> +        /* Set fwnmi capability in KVM */
>> +        if (kvmppc_set_fwnmi() < 0) {
>> +            error_report("Could not enable FWNMI capability");
>> +            exit(1);
>> +        }
>> +
>> +        /* Register ibm,nmi-register and ibm,nmi-interlock RTAS calls */
>> +        spapr_fwnmi_register();
> 
> This setup only needs to happen if CAP_MCE_FWNMI is turned on, so it
> makes more sense in the .apply hooks for that rather than general
> machine_init, I think.

ok. I will check.

Regards,
Aravinda

> 
>>      }
>>  
>>      spapr->rtas_blob = g_malloc(spapr->rtas_size);
>> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
>> index d8fb8a8..b569538 100644
>> --- a/hw/ppc/spapr_rtas.c
>> +++ b/hw/ppc/spapr_rtas.c
>> @@ -400,6 +400,55 @@ static void rtas_get_power_level(PowerPCCPU *cpu, SpaprMachineState *spapr,
>>      rtas_st(rets, 1, 100);
>>  }
>>  
>> +static void rtas_ibm_nmi_register(PowerPCCPU *cpu,
>> +                                  SpaprMachineState *spapr,
>> +                                  uint32_t token, uint32_t nargs,
>> +                                  target_ulong args,
>> +                                  uint32_t nret, target_ulong rets)
>> +{
>> +    hwaddr rtas_addr = spapr_get_rtas_addr();
>> +
>> +    if (!rtas_addr) {
>> +        rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
>> +        return;
>> +    }
>> +
>> +    if (spapr_get_cap(spapr, SPAPR_CAP_FWNMI_MCE) == SPAPR_CAP_OFF) {
>> +        rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
>> +        return;
>> +    }
>> +
>> +    spapr->guest_machine_check_addr = rtas_ld(args, 1);
>> +    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>> +}
>> +
>> +static void rtas_ibm_nmi_interlock(PowerPCCPU *cpu,
>> +                                   SpaprMachineState *spapr,
>> +                                   uint32_t token, uint32_t nargs,
>> +                                   target_ulong args,
>> +                                   uint32_t nret, target_ulong rets)
>> +{
>> +    if (spapr->guest_machine_check_addr == -1) {
>> +        /* NMI register not called */
>> +        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>> +        return;
>> +    }
>> +
>> +    if (spapr->mc_status != cpu->vcpu_id) {
>> +        /* The vCPU that hit the NMI should invoke "ibm,nmi-interlock" */
>> +        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>> +        return;
>> +    }
>> +
>> +    /*
>> +     * vCPU issuing "ibm,nmi-interlock" is done with NMI handling,
>> +     * hence unset mc_status.
>> +     */
>> +    spapr->mc_status = -1;
>> +    qemu_cond_signal(&spapr->mc_delivery_cond);
>> +    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>> +}
>> +
>>  static struct rtas_call {
>>      const char *name;
>>      spapr_rtas_fn fn;
>> @@ -544,6 +593,14 @@ hwaddr spapr_get_rtas_addr(void)
>>      return (hwaddr)fdt32_to_cpu(*rtas_data);
>>  }
>>  
>> +void spapr_fwnmi_register(void)
>> +{
>> +    spapr_rtas_register(RTAS_IBM_NMI_REGISTER, "ibm,nmi-register",
>> +                        rtas_ibm_nmi_register);
>> +    spapr_rtas_register(RTAS_IBM_NMI_INTERLOCK, "ibm,nmi-interlock",
>> +                        rtas_ibm_nmi_interlock);
>> +}
>> +
>>  static void core_rtas_register_types(void)
>>  {
>>      spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character",
>> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
>> index ffefde7..dada821 100644
>> --- a/include/hw/ppc/spapr.h
>> +++ b/include/hw/ppc/spapr.h
>> @@ -655,8 +655,10 @@ target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
>>  #define RTAS_IBM_REMOVE_PE_DMA_WINDOW           (RTAS_TOKEN_BASE + 0x28)
>>  #define RTAS_IBM_RESET_PE_DMA_WINDOW            (RTAS_TOKEN_BASE + 0x29)
>>  #define RTAS_IBM_SUSPEND_ME                     (RTAS_TOKEN_BASE + 0x2A)
>> +#define RTAS_IBM_NMI_REGISTER                   (RTAS_TOKEN_BASE + 0x2B)
>> +#define RTAS_IBM_NMI_INTERLOCK                  (RTAS_TOKEN_BASE + 0x2C)
>>  
>> -#define RTAS_TOKEN_MAX                          (RTAS_TOKEN_BASE + 0x2B)
>> +#define RTAS_TOKEN_MAX                          (RTAS_TOKEN_BASE + 0x2D)
>>  
>>  /* RTAS ibm,get-system-parameter token values */
>>  #define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS      20
>> @@ -908,4 +910,5 @@ void spapr_check_pagesize(SpaprMachineState *spapr, hwaddr pagesize,
>>  
>>  void spapr_set_all_lpcrs(target_ulong value, target_ulong mask);
>>  hwaddr spapr_get_rtas_addr(void);
>> +void spapr_fwnmi_register(void);
>>  #endif /* HW_SPAPR_H */
>>
> 

-- 
Regards,
Aravinda


  reply	other threads:[~2019-09-25  6:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-18  8:12 [Qemu-devel] [PATCH v14 0/7] target-ppc/spapr: Add FWNMI support in QEMU for PowerKVM guests Aravinda Prasad
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 1/7] Wrapper function to wait on condition for the main loop mutex Aravinda Prasad
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 2/7] ppc: spapr: Introduce FWNMI capability Aravinda Prasad
2019-09-25  1:12   ` David Gibson
2019-09-25  5:42     ` Aravinda Prasad
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 3/7] target/ppc: Handle NMI guest exit Aravinda Prasad
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 4/7] target/ppc: Build rtas error log upon an MCE Aravinda Prasad
2019-09-25  1:30   ` David Gibson
2019-09-25  6:01     ` Aravinda Prasad
2019-09-25  6:16       ` Greg Kurz
2019-09-25  6:48       ` David Gibson
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 5/7] ppc: spapr: Handle "ibm, nmi-register" and "ibm, nmi-interlock" RTAS calls Aravinda Prasad
2019-09-25  1:33   ` David Gibson
2019-09-25  6:04     ` Aravinda Prasad [this message]
2019-09-18  8:12 ` [Qemu-devel] [PATCH v14 6/7] migration: Include migration support for machine check handling Aravinda Prasad
2019-09-25  1:39   ` David Gibson
2019-09-25  6:12     ` Aravinda Prasad
2019-09-18  8:13 ` [Qemu-devel] [PATCH v14 7/7] ppc: spapr: Activate the FWNMI functionality Aravinda Prasad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d9aca0a5-da20-733e-5b3c-3c625c00adaa@linux.vnet.ibm.com \
    --to=aravinda@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=david@gibson.dropbear.id.au \
    --cc=ganeshgr@linux.ibm.com \
    --cc=groug@kaod.org \
    --cc=paulus@ozlabs.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).