From: Finn Thain <fthain@telegraphics.com.au>
To: Jason Wang <jasowang@redhat.com>, qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>,
"Aleksandar Rikalo" <aleksandar.rikalo@rt-rk.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Laurent Vivier" <laurent@vivier.eu>,
qemu-stable@nongnu.org
Subject: [PATCH v4 05/14] dp8393x: Update LLFA and CRDA registers from rx descriptor
Date: Wed, 29 Jan 2020 20:27:49 +1100 [thread overview]
Message-ID: <dae9a2e3f6cdd403e6afab901b234a8b7f3289b8.1580290069.git.fthain@telegraphics.com.au> (raw)
In-Reply-To: <cover.1580290069.git.fthain@telegraphics.com.au>
Follow the algorithm given in the National Semiconductor DP83932C
datasheet in section 3.4.7:
At the next reception, the SONIC re-reads the last RXpkt.link field,
and updates its CRDA register to point to the next descriptor.
The chip is designed to allow the host to provide a new list of
descriptors in this way.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Laurent Vivier <laurent@vivier.eu>
---
Changed since v1:
- Update CRDA register from LLFA register after EOL is cleared.
---
hw/net/dp8393x.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index ece72cbf42..249be403af 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -784,12 +784,13 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
address = dp8393x_crda(s) + sizeof(uint16_t) * 5 * width;
address_space_rw(&s->as, address, MEMTXATTRS_UNSPECIFIED,
(uint8_t *)s->data, size, 0);
- if (dp8393x_get(s, width, 0) & SONIC_DESC_EOL) {
+ s->regs[SONIC_LLFA] = dp8393x_get(s, width, 0);
+ if (s->regs[SONIC_LLFA] & SONIC_DESC_EOL) {
/* Still EOL ; stop reception */
return -1;
- } else {
- s->regs[SONIC_CRDA] = s->regs[SONIC_LLFA];
}
+ /* Link has been updated by host */
+ s->regs[SONIC_CRDA] = s->regs[SONIC_LLFA];
}
/* Save current position */
@@ -837,7 +838,7 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
address_space_rw(&s->as, dp8393x_crda(s),
MEMTXATTRS_UNSPECIFIED, (uint8_t *)s->data, size, 1);
- /* Move to next descriptor */
+ /* Check link field */
size = sizeof(uint16_t) * width;
address_space_rw(&s->as, dp8393x_crda(s) + sizeof(uint16_t) * 5 * width,
MEMTXATTRS_UNSPECIFIED, (uint8_t *)s->data, size, 0);
@@ -852,6 +853,8 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
dp8393x_put(s, width, 0, 0);
address_space_rw(&s->as, address, MEMTXATTRS_UNSPECIFIED,
(uint8_t *)s->data, size, 1);
+
+ /* Move to next descriptor */
s->regs[SONIC_CRDA] = s->regs[SONIC_LLFA];
s->regs[SONIC_ISR] |= SONIC_ISR_PKTRX;
s->regs[SONIC_RSC] = (s->regs[SONIC_RSC] & 0xff00) | (((s->regs[SONIC_RSC] & 0x00ff) + 1) & 0x00ff);
--
2.24.1
next prev parent reply other threads:[~2020-01-29 9:38 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 9:27 [PATCH v4 00/14] Fixes for DP8393X SONIC device emulation Finn Thain
2020-01-29 9:27 ` [PATCH v4 02/14] dp8393x: Always use 32-bit accesses Finn Thain
2020-01-29 9:27 ` [PATCH v4 09/14] dp8393x: Use long-word-aligned RRA pointers in 32-bit mode Finn Thain
2020-01-29 9:27 ` [PATCH v4 07/14] dp8393x: Implement packet size limit and RBAE interrupt Finn Thain
2020-01-29 9:27 ` [PATCH v4 10/14] dp8393x: Pad frames to word or long word boundary Finn Thain
2020-01-29 9:27 ` [PATCH v4 12/14] dp8393x: Always update RRA pointers and sequence numbers Finn Thain
2020-01-29 9:27 ` [PATCH v4 13/14] dp8393x: Don't reset Silicon Revision register Finn Thain
2020-01-29 16:37 ` Philippe Mathieu-Daudé
2020-01-29 9:27 ` [PATCH v4 11/14] dp8393x: Clear descriptor in_use field to release packet Finn Thain
2020-01-29 9:27 ` [PATCH v4 08/14] dp8393x: Don't clobber packet checksum Finn Thain
2020-01-29 9:27 ` [PATCH v4 04/14] dp8393x: Have dp8393x_receive() return the packet size Finn Thain
2020-01-29 9:27 ` [PATCH v4 14/14] dp8393x: Don't stop reception upon RBE interrupt assertion Finn Thain
2020-01-29 9:27 ` Finn Thain [this message]
2020-01-29 16:38 ` [PATCH v4 05/14] dp8393x: Update LLFA and CRDA registers from rx descriptor Philippe Mathieu-Daudé
2020-01-29 9:27 ` [PATCH v4 03/14] dp8393x: Clean up endianness hacks Finn Thain
2020-01-29 9:27 ` [PATCH v4 06/14] dp8393x: Clear RRRA command register bit only when appropriate Finn Thain
2020-01-29 9:27 ` [PATCH v4 01/14] dp8393x: Mask EOL bit from descriptor addresses Finn Thain
2020-02-04 3:58 ` [PATCH v4 00/14] Fixes for DP8393X SONIC device emulation Jason Wang
2020-02-18 18:30 ` Aleksandar Markovic
2020-02-19 3:13 ` Jason Wang
2020-02-18 18:25 ` Aleksandar Markovic
2020-02-19 1:06 ` Finn Thain
2020-02-19 1:54 ` Aleksandar Markovic
2020-02-19 1:57 ` Aleksandar Markovic
2020-02-19 7:55 ` Laurent Vivier
2020-02-19 8:27 ` Philippe Mathieu-Daudé
2020-02-20 6:55 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dae9a2e3f6cdd403e6afab901b234a8b7f3289b8.1580290069.git.fthain@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=aleksandar.rikalo@rt-rk.com \
--cc=hpoussin@reactos.org \
--cc=jasowang@redhat.com \
--cc=laurent@vivier.eu \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).