qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
To: Peter Maydell <peter.maydell@linaro.org>,
	qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: Leif Lindholm <leif@nuviainc.com>
Subject: Re: [PATCH] target/arm: Make number of counters in PMCR follow the CPU
Date: Fri, 19 Mar 2021 11:54:18 +0100	[thread overview]
Message-ID: <db6fc717-e233-8ce5-95fc-22a40c416623@linaro.org> (raw)
In-Reply-To: <20210311165947.27470-1-peter.maydell@linaro.org>

W dniu 11.03.2021 o 17:59, Peter Maydell pisze:
> Currently we give all the v7-and-up CPUs a PMU with 4 counters.  This
> means that we don't provide the 6 counters that are required by the
> Arm BSA (Base System Architecture) specification if the CPU supports
> the Virtualization extensions.
> 
> Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
> specify the PMCR reset value (obtained from the appropriate TRM), and
> use the 'N' field of that value to define the number of counters
> provided.
> 
> This means that we now supply 6 counters for Cortex-A53, A57, A72,
> A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
> Cortex-R5 goes down to 3.
> 
> Note that because we now use the PMCR reset value of the specific
> implementation, we no longer set the LC bit out of reset.  This has
> an UNKNOWN value out of reset for all cores with any AArch32 support,
> so guest software should be setting it anyway if it wants it.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

I checked on A57/A72/max with sbsa-ref machine. Each of them got 7 PMU 
counters reported by both SBSA ACS and Linux 5.3 kernel.

Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>

> ---
> This is pretty much untested (I just checked Linux still boots;
> haven't tried it with KVM either). It's an alternative to
> just bumping PMCR_NUM_COUNTERS to 6.
> ---
>   target/arm/cpu.h     |  1 +
>   target/arm/cpu64.c   |  3 +++
>   target/arm/cpu_tcg.c |  5 +++++
>   target/arm/helper.c  | 29 +++++++++++++++++------------
>   target/arm/kvm64.c   |  2 ++
>   5 files changed, 28 insertions(+), 12 deletions(-)
> 
> diff --git a/target/arm/cpu.h b/target/arm/cpu.h
> index 193a49ec7fa..fe68f464b3a 100644
> --- a/target/arm/cpu.h
> +++ b/target/arm/cpu.h
> @@ -942,6 +942,7 @@ struct ARMCPU {
>           uint64_t id_aa64mmfr2;
>           uint64_t id_aa64dfr0;
>           uint64_t id_aa64dfr1;
> +        uint64_t reset_pmcr_el0;
>       } isar;
>       uint64_t midr;
>       uint32_t revidr;
> diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
> index f0a9e968c9c..5d9d56a33c3 100644
> --- a/target/arm/cpu64.c
> +++ b/target/arm/cpu64.c
> @@ -141,6 +141,7 @@ static void aarch64_a57_initfn(Object *obj)
>       cpu->gic_num_lrs = 4;
>       cpu->gic_vpribits = 5;
>       cpu->gic_vprebits = 5;
> +    cpu->isar.reset_pmcr_el0 = 0x41013000;
>       define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
>   }
>   
> @@ -194,6 +195,7 @@ static void aarch64_a53_initfn(Object *obj)
>       cpu->gic_num_lrs = 4;
>       cpu->gic_vpribits = 5;
>       cpu->gic_vprebits = 5;
> +    cpu->isar.reset_pmcr_el0 = 0x41033000;
>       define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
>   }
>   
> @@ -245,6 +247,7 @@ static void aarch64_a72_initfn(Object *obj)
>       cpu->gic_num_lrs = 4;
>       cpu->gic_vpribits = 5;
>       cpu->gic_vprebits = 5;
> +    cpu->isar.reset_pmcr_el0 = 0x41023000;
>       define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
>   }
>   
> diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
> index 046e476f65f..8252fd29f90 100644
> --- a/target/arm/cpu_tcg.c
> +++ b/target/arm/cpu_tcg.c
> @@ -301,6 +301,7 @@ static void cortex_a8_initfn(Object *obj)
>       cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
>       cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
>       cpu->reset_auxcr = 2;
> +    cpu->isar.reset_pmcr_el0 = 0x41002000;
>       define_arm_cp_regs(cpu, cortexa8_cp_reginfo);
>   }
>   
> @@ -373,6 +374,7 @@ static void cortex_a9_initfn(Object *obj)
>       cpu->clidr = (1 << 27) | (1 << 24) | 3;
>       cpu->ccsidr[0] = 0xe00fe019; /* 16k L1 dcache. */
>       cpu->ccsidr[1] = 0x200fe019; /* 16k L1 icache. */
> +    cpu->isar.reset_pmcr_el0 = 0x41093000;
>       define_arm_cp_regs(cpu, cortexa9_cp_reginfo);
>   }
>   
> @@ -443,6 +445,7 @@ static void cortex_a7_initfn(Object *obj)
>       cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
>       cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
>       cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
> +    cpu->isar.reset_pmcr_el0 = 0x41072000;
>       define_arm_cp_regs(cpu, cortexa15_cp_reginfo); /* Same as A15 */
>   }
>   
> @@ -485,6 +488,7 @@ static void cortex_a15_initfn(Object *obj)
>       cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
>       cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
>       cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
> +    cpu->isar.reset_pmcr_el0 = 0x410F3000;
>       define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
>   }
>   
> @@ -717,6 +721,7 @@ static void cortex_r5_initfn(Object *obj)
>       cpu->isar.id_isar6 = 0x0;
>       cpu->mp_is_up = true;
>       cpu->pmsav7_dregion = 16;
> +    cpu->isar.reset_pmcr_el0 = 0x41151800;
>       define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
>   }
>   
> diff --git a/target/arm/helper.c b/target/arm/helper.c
> index 904b0927cd2..2f3867cad79 100644
> --- a/target/arm/helper.c
> +++ b/target/arm/helper.c
> @@ -38,7 +38,6 @@
>   #endif
>   
>   #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */
> -#define PMCR_NUM_COUNTERS 4 /* QEMU IMPDEF choice */
>   
>   #ifndef CONFIG_USER_ONLY
>   
> @@ -1149,7 +1148,9 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
>   
>   static inline uint32_t pmu_num_counters(CPUARMState *env)
>   {
> -  return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
> +    ARMCPU *cpu = env_archcpu(env);
> +
> +    return (cpu->isar.reset_pmcr_el0 & PMCRN_MASK) >> PMCRN_SHIFT;
>   }
>   
>   /* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */
> @@ -5753,13 +5754,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
>         .resetvalue = 0,
>         .writefn = gt_hyp_ctl_write, .raw_writefn = raw_write },
>   #endif
> -    /* The only field of MDCR_EL2 that has a defined architectural reset value
> -     * is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N.
> -     */
> -    { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
> -      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
> -      .access = PL2_RW, .resetvalue = PMCR_NUM_COUNTERS,
> -      .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2), },
>       { .name = "HPFAR", .state = ARM_CP_STATE_AA32,
>         .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
>         .access = PL2_RW, .accessfn = access_el3_aa32ns,
> @@ -6689,7 +6683,7 @@ static void define_pmu_regs(ARMCPU *cpu)
>        * field as main ID register, and we implement four counters in
>        * addition to the cycle count register.
>        */
> -    unsigned int i, pmcrn = PMCR_NUM_COUNTERS;
> +    unsigned int i, pmcrn = pmu_num_counters(&cpu->env);
>       ARMCPRegInfo pmcr = {
>           .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
>           .access = PL0_RW,
> @@ -6704,10 +6698,10 @@ static void define_pmu_regs(ARMCPU *cpu)
>           .access = PL0_RW, .accessfn = pmreg_access,
>           .type = ARM_CP_IO,
>           .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
> -        .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT) |
> -                      PMCRLC,
> +        .resetvalue = cpu->isar.reset_pmcr_el0,
>           .writefn = pmcr_write, .raw_writefn = raw_write,
>       };
> +
>       define_one_arm_cp_reg(cpu, &pmcr);
>       define_one_arm_cp_reg(cpu, &pmcr64);
>       for (i = 0; i < pmcrn; i++) {
> @@ -7825,6 +7819,17 @@ void register_cp_regs_for_features(ARMCPU *cpu)
>                 .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) },
>               REGINFO_SENTINEL
>           };
> +        /*
> +         * The only field of MDCR_EL2 that has a defined architectural reset
> +         * value is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N.
> +         */
> +        ARMCPRegInfo mdcr_el2 = {
> +            .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
> +            .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
> +            .access = PL2_RW, .resetvalue = pmu_num_counters(env),
> +            .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2),
> +        };
> +        define_one_arm_cp_reg(cpu, &mdcr_el2);
>           define_arm_cp_regs(cpu, vpidr_regs);
>           define_arm_cp_regs(cpu, el2_cp_reginfo);
>           if (arm_feature(env, ARM_FEATURE_V8)) {
> diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
> index dff85f6db94..581335e49d3 100644
> --- a/target/arm/kvm64.c
> +++ b/target/arm/kvm64.c
> @@ -566,6 +566,8 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
>                                 ARM64_SYS_REG(3, 0, 0, 7, 1));
>           err |= read_sys_reg64(fdarray[2], &ahcf->isar.id_aa64mmfr2,
>                                 ARM64_SYS_REG(3, 0, 0, 7, 2));
> +        err |= read_sys_reg64(fdarray[2], &ahcf->isar.reset_pmcr_el0,
> +                              ARM64_SYS_REG(3, 3, 9, 12, 0));
>   
>           /*
>            * Note that if AArch32 support is not present in the host,
> 



  parent reply	other threads:[~2021-03-19 10:55 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-11 16:59 [PATCH] target/arm: Make number of counters in PMCR follow the CPU Peter Maydell
2021-03-19 10:39 ` Peter Maydell
2021-03-19 10:54 ` Marcin Juszkiewicz [this message]
2021-03-26 14:19 ` Richard Henderson
2021-03-31  8:59 ` Zenghui Yu
2021-03-31  9:43   ` Peter Maydell
  -- strict thread matches above, loose matches on Subject: below --
2022-05-13 12:28 Peter Maydell
2022-05-13 15:47 ` Richard Henderson
2022-05-17 23:24 ` ishii.shuuichir
2022-05-18 10:30   ` Peter Maydell
2022-05-18 23:33     ` ishii.shuuichir

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=db6fc717-e233-8ce5-95fc-22a40c416623@linaro.org \
    --to=marcin.juszkiewicz@linaro.org \
    --cc=leif@nuviainc.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).