From: Pavel Hrdina <phrdina@redhat.com>
To: kwolf@redhat.com
Cc: Pavel Hrdina <phrdina@redhat.com>, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v6 3/6] fdc: rewrite seek and DSKCHG bit handling
Date: Fri, 22 Jun 2012 12:33:54 +0200 [thread overview]
Message-ID: <dc57336e252cd13c0037dd12db725a2486dba81e.1340360906.git.phrdina@redhat.com> (raw)
In-Reply-To: <cover.1340220873.git.phrdina@redhat.com>
In-Reply-To: <3359847e9dbdf4531ed17e86ef55be8b8676e329.1340360906.git.phrdina@redhat.com>
This bit is cleared on every successful seek to a different track (cylinder).
The seek is also called on revalidate or on read/write/format commands which
also clear the DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
---
hw/fdc.c | 79 ++++++++++++++++++++++++++++++++-----------------------------
1 files changed, 41 insertions(+), 38 deletions(-)
diff --git a/hw/fdc.c b/hw/fdc.c
index 5b3224b..0270264 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -153,8 +153,12 @@ static int fd_seek(FDrive *drv, uint8_t head, uint8_t track, uint8_t sect,
}
#endif
drv->head = head;
- if (drv->track != track)
+ if (drv->track != track) {
+ if (drv->bs != NULL && bdrv_is_inserted(drv->bs)) {
+ drv->media_changed = 0;
+ }
ret = 1;
+ }
drv->track = track;
drv->sect = sect;
}
@@ -170,9 +174,7 @@ static int fd_seek(FDrive *drv, uint8_t head, uint8_t track, uint8_t sect,
static void fd_recalibrate(FDrive *drv)
{
FLOPPY_DPRINTF("recalibrate\n");
- drv->head = 0;
- drv->track = 0;
- drv->sect = 1;
+ fd_seek(drv, 0, 0, 1, 1);
}
/* Revalidate a disk drive after a disk change */
@@ -711,14 +713,6 @@ static void fdctrl_raise_irq(FDCtrl *fdctrl, uint8_t status0)
qemu_set_irq(fdctrl->irq, 1);
fdctrl->sra |= FD_SRA_INTPEND;
}
- if (status0 & FD_SR0_SEEK) {
- FDrive *cur_drv;
- /* A seek clears the disk change line (if a disk is inserted) */
- cur_drv = get_cur_drv(fdctrl);
- if (cur_drv->bs != NULL && bdrv_is_inserted(cur_drv->bs)) {
- cur_drv->media_changed = 0;
- }
- }
fdctrl->reset_sensei = 0;
fdctrl->status0 = status0;
@@ -997,7 +991,10 @@ static void fdctrl_unimplemented(FDCtrl *fdctrl, int direction)
fdctrl_set_fifo(fdctrl, 1, 0);
}
-/* Seek to next sector */
+/* Seek to next sector
+ * returns 0 when end of track reached (for DBL_SIDES on head 1)
+ * otherwise returns 1
+ */
static int fdctrl_seek_to_next_sect(FDCtrl *fdctrl, FDrive *cur_drv)
{
FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d)\n",
@@ -1005,30 +1002,39 @@ static int fdctrl_seek_to_next_sect(FDCtrl *fdctrl, FDrive *cur_drv)
fd_sector(cur_drv));
/* XXX: cur_drv->sect >= cur_drv->last_sect should be an
error in fact */
- if (cur_drv->sect >= cur_drv->last_sect ||
- cur_drv->sect == fdctrl->eot) {
- cur_drv->sect = 1;
+ uint8_t new_head = cur_drv->head;
+ uint8_t new_track = cur_drv->track;
+ uint8_t new_sect = cur_drv->sect;
+
+ int ret = 1;
+
+ if (new_sect >= cur_drv->last_sect ||
+ new_sect == fdctrl->eot) {
+ new_sect = 1;
if (FD_MULTI_TRACK(fdctrl->data_state)) {
- if (cur_drv->head == 0 &&
+ if (new_head == 0 &&
(cur_drv->flags & FDISK_DBL_SIDES) != 0) {
- cur_drv->head = 1;
+ new_head = 1;
} else {
- cur_drv->head = 0;
- cur_drv->track++;
- if ((cur_drv->flags & FDISK_DBL_SIDES) == 0)
- return 0;
+ new_head = 0;
+ new_track++;
+ if ((cur_drv->flags & FDISK_DBL_SIDES) == 0) {
+ ret = 0;
+ }
}
} else {
- cur_drv->track++;
- return 0;
+ new_track++;
+ ret = 0;
+ }
+ if (ret == 1) {
+ FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
+ new_head, new_track, new_sect, fd_sector(cur_drv));
}
- FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
- cur_drv->head, cur_drv->track,
- cur_drv->sect, fd_sector(cur_drv));
} else {
- cur_drv->sect++;
+ new_sect++;
}
- return 1;
+ fd_seek(cur_drv, new_head, new_track, new_sect, 1);
+ return ret;
}
/* Callback for transfer end (stop or abort) */
@@ -1626,11 +1632,7 @@ static void fdctrl_handle_seek(FDCtrl *fdctrl, int direction)
/* The seek command just sends step pulses to the drive and doesn't care if
* there is a medium inserted of if it's banging the head against the drive.
*/
- if (fdctrl->fifo[2] > cur_drv->max_track) {
- cur_drv->track = cur_drv->max_track;
- } else {
- cur_drv->track = fdctrl->fifo[2];
- }
+ fd_seek(cur_drv, cur_drv->head, fdctrl->fifo[2], cur_drv->sect, 1);
/* Raise Interrupt */
fdctrl_raise_irq(fdctrl, FD_SR0_SEEK);
}
@@ -1695,9 +1697,10 @@ static void fdctrl_handle_relative_seek_out(FDCtrl *fdctrl, int direction)
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
cur_drv = get_cur_drv(fdctrl);
if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
- cur_drv->track = cur_drv->max_track - 1;
+ fd_seek(cur_drv, cur_drv->head, cur_drv->max_track - 1,
+ cur_drv->sect, 1);
} else {
- cur_drv->track += fdctrl->fifo[2];
+ fd_seek(cur_drv, cur_drv->head, fdctrl->fifo[2], cur_drv->sect, 1);
}
fdctrl_reset_fifo(fdctrl);
/* Raise Interrupt */
@@ -1711,9 +1714,9 @@ static void fdctrl_handle_relative_seek_in(FDCtrl *fdctrl, int direction)
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
cur_drv = get_cur_drv(fdctrl);
if (fdctrl->fifo[2] > cur_drv->track) {
- cur_drv->track = 0;
+ fd_seek(cur_drv, cur_drv->head, 0, cur_drv->sect, 1);
} else {
- cur_drv->track -= fdctrl->fifo[2];
+ fd_seek(cur_drv, cur_drv->head, fdctrl->fifo[2], cur_drv->sect, 1);
}
fdctrl_reset_fifo(fdctrl);
/* Raise Interrupt */
--
1.7.7.6
next prev parent reply other threads:[~2012-06-22 10:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-22 10:33 [Qemu-devel] [PATCH v6 0/6] fdc: fix/rewrite seek, media_changed and interrupt handling Pavel Hrdina
2012-06-22 10:33 ` [Qemu-devel] [PATCH v6 1/6] fdc: fix implied seek while there is no media in drive Pavel Hrdina
2012-06-22 10:33 ` [Qemu-devel] [PATCH v6 2/6] fdc-test: introduced qtest read_without_media Pavel Hrdina
[not found] ` <3359847e9dbdf4531ed17e86ef55be8b8676e329.1340360906.git.phrdina@redhat.com>
2012-06-22 10:33 ` Pavel Hrdina [this message]
2012-06-22 10:33 ` [Qemu-devel] [PATCH v6 4/6] fdc: fix interrupt handling Pavel Hrdina
2012-06-22 10:33 ` [Qemu-devel] [PATCH v6 5/6] fdc_test: update media_change test Pavel Hrdina
2012-06-24 6:16 ` Blue Swirl
[not found] ` <4FE83483.4010204@redhat.com>
2012-07-03 14:43 ` Pavel Hrdina
2012-06-22 10:33 ` [Qemu-devel] [PATCH v6 6/6] fdc_test: introduce test_sense_interrupt Pavel Hrdina
2012-07-04 9:07 ` [Qemu-devel] [PATCH v7 5/6] fdc_test: update media_change test Pavel Hrdina
2012-07-04 14:43 ` [Qemu-devel] [PATCH v8 " Kevin Wolf
2012-07-04 9:07 ` [Qemu-devel] [PATCH v7 6/6] fdc_test: introduce test_sense_interrupt Pavel Hrdina
2012-07-04 9:07 ` [Qemu-devel] [PATCH v7 0/6] fdc: fix/rewrite seek, media_changed and interrupt handling Pavel Hrdina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc57336e252cd13c0037dd12db725a2486dba81e.1340360906.git.phrdina@redhat.com \
--to=phrdina@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).