From: Eric Blake <eblake@redhat.com>
To: Max Reitz <mreitz@redhat.com>, qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH for-4.2 07/13] qcow2: Add qcow2_check_fix_snapshot_table()
Date: Tue, 30 Jul 2019 13:54:31 -0500 [thread overview]
Message-ID: <dc71a5c0-bc5f-fd94-cbdb-e537ea714e5b@redhat.com> (raw)
In-Reply-To: <20190730172508.19911-8-mreitz@redhat.com>
[-- Attachment #1.1: Type: text/plain, Size: 837 bytes --]
On 7/30/19 12:25 PM, Max Reitz wrote:
> qcow2_check_read_snapshot_table() can perform consistency checks, but it
> cannot fix everything. Specifically, it cannot allocate new clusters,
> because that should wait until the refcount structures are known to be
> consistent (i.e., after qcow2_check_refcounts()). Thus, it cannot call
> qcow2_write_snapshots().
>
> Do that in qcow2_check_fix_snapshot_table(), which is called after
> qcow2_check_refcounts().
>
> Currently, there is nothing that would set result->corruptions, so this
> is a no-op. A follow-up patch will change that.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2019-07-30 18:55 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 17:24 [Qemu-devel] [PATCH for-4.2 00/13] qcow2: Let check -r all repair some snapshot bits Max Reitz
2019-07-30 17:24 ` [Qemu-devel] [PATCH for-4.2 01/13] qcow2: Add Error ** to qcow2_read_snapshots() Max Reitz
2019-07-30 17:41 ` Eric Blake
2019-07-30 17:24 ` [Qemu-devel] [PATCH for-4.2 02/13] qcow2: Keep unknown extra snapshot data Max Reitz
2019-07-30 17:56 ` Eric Blake
2019-07-31 8:54 ` Max Reitz
2019-08-16 2:09 ` Max Reitz
2019-07-30 17:24 ` [Qemu-devel] [PATCH for-4.2 03/13] qcow2: Make qcow2_write_snapshots() public Max Reitz
2019-07-30 17:57 ` Eric Blake
2019-07-30 17:24 ` [Qemu-devel] [PATCH for-4.2 04/13] qcow2: Put qcow2_upgrade() into an own function Max Reitz
2019-07-30 18:00 ` Eric Blake
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 05/13] qcow2: Write v3-compliant snapshot list on upgrade Max Reitz
2019-07-30 18:10 ` Eric Blake
2019-07-31 8:56 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 06/13] qcow2: Separate qcow2_check_read_snapshot_table() Max Reitz
2019-07-30 18:53 ` Eric Blake
2019-07-31 8:59 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 07/13] qcow2: Add qcow2_check_fix_snapshot_table() Max Reitz
2019-07-30 18:54 ` Eric Blake [this message]
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 08/13] qcow2: Fix broken snapshot table entries Max Reitz
2019-07-30 19:02 ` Eric Blake
2019-07-31 9:06 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 09/13] qcow2: Fix overly long snapshot tables Max Reitz
2019-07-30 19:08 ` Eric Blake
2019-07-31 9:22 ` Max Reitz
2019-08-16 18:06 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 10/13] qcow2: Repair snapshot table with too many entries Max Reitz
2019-07-30 19:10 ` Eric Blake
2019-07-31 9:25 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 11/13] qcow2: Fix v3 snapshot table entry compliancy Max Reitz
2019-07-30 19:12 ` Eric Blake
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 12/13] iotests: Add peek_file* functions Max Reitz
2019-07-30 19:22 ` Eric Blake
2019-07-31 9:27 ` Max Reitz
2019-07-30 17:25 ` [Qemu-devel] [PATCH for-4.2 13/13] iotests: Test qcow2's snapshot table handling Max Reitz
2019-07-30 19:56 ` Eric Blake
2019-07-31 9:36 ` Max Reitz
2019-07-30 17:39 ` [Qemu-devel] [PATCH for-4.2 00/13] qcow2: Let check -r all repair some snapshot bits Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc71a5c0-bc5f-fd94-cbdb-e537ea714e5b@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).