[Qemu-devel] Stair step trace output since 12fb0ac05

[Qemu-devel] Stair step trace output since 12fb0ac05

[BALATON Zoltan]

Hello,

Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output is 
printed in stair steps when using -trace and -serial stdio together. E.g.
$ qemu-system-i386 -trace 'pci*' -serial stdio

Regards,
BALATON Zoltan

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Philippe Mathieu-Daudé]

On 06/06/2018 02:15 PM, BALATON Zoltan wrote:
> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output is
> printed in stair steps when using -trace and -serial stdio together. E.g.
> $ qemu-system-i386 -trace 'pci*' -serial stdio

True! I'm seeing this too, didn't mind to bisect.

$ arm-softmmu/qemu-system-arm -M lm3s6965evb -serial vc -kernel
sd_card.bin -sd sdcard.img -d trace:sd* -S -monitor stdio
WARNING: Image format was not specified for 'sdcard.img' and probing
guessed raw.

                 Automatically detecting the format is dangerous for raw
images, write operations on block 0 will be restricted.

Specify the 'raw' format explicitly to remove the restrictions.

                                                        QEMU 2.12.50
monitor - type 'help' for more information
(qemu) 24447@1528302742.804868:sdcard_hard_reset power-on

24447@1528302742.804880:sdcard_set_voltage 3.300V (UHS:0)


24447@1528302742.804887:sdcard_soft_reset reset

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Peter Maydell]

On 6 June 2018 at 18:15, BALATON Zoltan <balaton@eik.bme.hu> wrote:
> Hello,
>
> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output is
> printed in stair steps when using -trace and -serial stdio together. E.g.
> $ qemu-system-i386 -trace 'pci*' -serial stdio

I had a feeling that we were going to find that there were
situations where we really wanted to retain the crlf
processing...

thanks
-- PMM

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Thomas Huth]

On 06.06.2018 20:33, Peter Maydell wrote:
> On 6 June 2018 at 18:15, BALATON Zoltan <balaton@eik.bme.hu> wrote:
>> Hello,
>>
>> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output is
>> printed in stair steps when using -trace and -serial stdio together. E.g.
>> $ qemu-system-i386 -trace 'pci*' -serial stdio
> 
> I had a feeling that we were going to find that there were
> situations where we really wanted to retain the crlf
> processing...

I think the problem is that we've turned it on in char-stdio.c, too.
char-serial.c should be sufficient.

Is someone volunteering for sending a patch to revert the changes in
char-stdio.c ?

 Thomas

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Markus Armbruster]

BALATON Zoltan <balaton@eik.bme.hu> writes:

> Hello,
>
> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output
> is printed in stair steps when using -trace and -serial stdio
> together. E.g.
> $ qemu-system-i386 -trace 'pci*' -serial stdio
>
> Regards,
> BALATON Zoltan

I cc'ed the people involved with this patch for you.

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Thomas Huth]

On 06.06.2018 20:56, Markus Armbruster wrote:
> BALATON Zoltan <balaton@eik.bme.hu> writes:
> 
>> Hello,
>>
>> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output
>> is printed in stair steps when using -trace and -serial stdio
>> together. E.g.
>> $ qemu-system-i386 -trace 'pci*' -serial stdio
>>
>> Regards,
>> BALATON Zoltan
> 
> I cc'ed the people involved with this patch for you.

Is it OK if you revert the change to chardev/char-stdio.c, but not
chardev/char-serial.c ?

 Thomas

Re: [Qemu-devel] Stair step trace output since 12fb0ac05

[Laurent Desnogues]

On Thu, Jun 7, 2018 at 6:56 AM, Thomas Huth <thuth@redhat.com> wrote:
> On 06.06.2018 20:56, Markus Armbruster wrote:
>> BALATON Zoltan <balaton@eik.bme.hu> writes:
>>
>>> Hello,
>>>
>>> Since 12fb0ac05 (char: Remove unwanted crlf conversion) trace output
>>> is printed in stair steps when using -trace and -serial stdio
>>> together. E.g.
>>> $ qemu-system-i386 -trace 'pci*' -serial stdio
>>>
>>> Regards,
>>> BALATON Zoltan
>>
>> I cc'ed the people involved with this patch for you.
>
> Is it OK if you revert the change to chardev/char-stdio.c, but not
> chardev/char-serial.c ?

That's what I did, and it was enough to fix the issues I had.

Thanks,

Laurent