From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Bernhard Beschow" <shentey@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Igor Mammedov" <imammedo@redhat.com>,
"Ani Sinha" <anisinha@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Eduardo Habkost" <eduardo@habkost.net>
Subject: [PULL 35/63] hw/i386/acpi-build: Use pc_madt_cpu_entry() directly
Date: Wed, 4 Oct 2023 04:44:58 -0400 [thread overview]
Message-ID: <e3eff26e9ebb4aab4045c3b934a2e00d3a8645c6.1696408966.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1696408966.git.mst@redhat.com>
From: Bernhard Beschow <shentey@gmail.com>
This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/i386/acpi-common.h | 3 +--
hw/i386/acpi-build.c | 3 +--
hw/i386/acpi-common.c | 5 ++---
hw/i386/acpi-microvm.c | 3 +--
4 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/hw/i386/acpi-common.h b/hw/i386/acpi-common.h
index a68825acf5..b3c56ee014 100644
--- a/hw/i386/acpi-common.h
+++ b/hw/i386/acpi-common.h
@@ -1,7 +1,6 @@
#ifndef HW_I386_ACPI_COMMON_H
#define HW_I386_ACPI_COMMON_H
-#include "hw/acpi/acpi_dev_interface.h"
#include "hw/acpi/bios-linker-loader.h"
#include "hw/i386/x86.h"
@@ -9,7 +8,7 @@
#define ACPI_BUILD_IOAPIC_ID 0x0
void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
- X86MachineState *x86ms, AcpiDeviceIf *adev,
+ X86MachineState *x86ms,
const char *oem_id, const char *oem_table_id);
#endif
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 4fb18fee3c..1a7245bea4 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2548,8 +2548,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
acpi_add_table(table_offsets, tables_blob);
acpi_build_madt(tables_blob, tables->linker, x86ms,
- ACPI_DEVICE_IF(x86ms->acpi_dev), x86ms->oem_id,
- x86ms->oem_table_id);
+ x86ms->oem_id, x86ms->oem_table_id);
#ifdef CONFIG_ACPI_ERST
{
diff --git a/hw/i386/acpi-common.c b/hw/i386/acpi-common.c
index 8a0932fe84..43dc23f7e0 100644
--- a/hw/i386/acpi-common.c
+++ b/hw/i386/acpi-common.c
@@ -94,14 +94,13 @@ build_xrupt_override(GArray *entry, uint8_t src, uint32_t gsi, uint16_t flags)
* 5.2.8 Multiple APIC Description Table
*/
void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
- X86MachineState *x86ms, AcpiDeviceIf *adev,
+ X86MachineState *x86ms,
const char *oem_id, const char *oem_table_id)
{
int i;
bool x2apic_mode = false;
MachineClass *mc = MACHINE_GET_CLASS(x86ms);
const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
- AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
AcpiTable table = { .sig = "APIC", .rev = 3, .oem_id = oem_id,
.oem_table_id = oem_table_id };
@@ -111,7 +110,7 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
for (i = 0; i < apic_ids->len; i++) {
- adevc->madt_cpu(i, apic_ids, table_data, false);
+ pc_madt_cpu_entry(i, apic_ids, table_data, false);
if (apic_ids->cpus[i].arch_id > 254) {
x2apic_mode = true;
}
diff --git a/hw/i386/acpi-microvm.c b/hw/i386/acpi-microvm.c
index a075360d85..fec22d85c1 100644
--- a/hw/i386/acpi-microvm.c
+++ b/hw/i386/acpi-microvm.c
@@ -214,8 +214,7 @@ static void acpi_build_microvm(AcpiBuildTables *tables,
acpi_add_table(table_offsets, tables_blob);
acpi_build_madt(tables_blob, tables->linker, X86_MACHINE(machine),
- ACPI_DEVICE_IF(x86ms->acpi_dev), x86ms->oem_id,
- x86ms->oem_table_id);
+ x86ms->oem_id, x86ms->oem_table_id);
#ifdef CONFIG_ACPI_ERST
{
--
MST
next prev parent reply other threads:[~2023-10-04 9:06 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 8:43 [PULL 00/63] virtio,pci: features, cleanups Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 01/63] pci: SLT must be RO Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 02/63] hw/virtio: Propagate page_mask to vhost_vdpa_listener_skipped_section() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 03/63] hw/virtio: Propagate page_mask to vhost_vdpa_section_end() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 04/63] hw/virtio/vhost-vdpa: Inline TARGET_PAGE_ALIGN() macro Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 05/63] hw/virtio/vhost-vdpa: Use target-agnostic qemu_target_page_mask() Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 06/63] hw/virtio: Build vhost-vdpa.o once Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 07/63] hw/virtio/meson: Rename softmmu_virtio_ss[] -> system_virtio_ss[] Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 08/63] virtio: add vhost-user-base and a generic vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 09/63] hw/virtio: add config support to vhost-user-device Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 10/63] virtio-net: do not reset vlan filtering at set_features Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 11/63] virtio-net: Expose MAX_VLAN Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 12/63] vdpa: Restore vlan filtering state Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 13/63] vdpa: Allow VIRTIO_NET_F_CTRL_VLAN in SVQ Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 14/63] virtio: don't zero out memory region cache for indirect descriptors Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 15/63] vdpa: use first queue SVQ state for CVQ default Michael S. Tsirkin
2023-10-04 8:43 ` [PULL 16/63] vdpa: export vhost_vdpa_set_vring_ready Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 17/63] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 18/63] vdpa: move vhost_vdpa_set_vring_ready to the caller Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 19/63] vdpa: remove net cvq migration blocker Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 20/63] vhost: Add count argument to vhost_svq_poll() Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 21/63] qmp: remove virtio_list, search QOM tree instead Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 22/63] qmp: update virtio feature maps, vhost-user-gpio introspection Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 23/63] vhost-user: move VhostUserProtocolFeature definition to header file Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 24/63] vhost-user: strip superfluous whitespace Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 25/63] vhost-user: tighten "reply_supported" scope in "set_vring_addr" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 26/63] vhost-user: factor out "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 27/63] vhost-user: flatten "enforce_reply" into "vhost_user_write_sync" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 28/63] vhost-user: hoist "write_sync", "get_features", "get_u64" Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 29/63] vhost-user: allow "vhost_set_vring" to wait for a reply Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 30/63] vhost-user: call VHOST_USER_SET_VRING_ENABLE synchronously Michael S. Tsirkin
2023-10-04 10:11 ` Laszlo Ersek
2023-10-04 12:53 ` Michael S. Tsirkin
2023-10-04 13:28 ` Laszlo Ersek
2023-10-04 8:44 ` [PULL 31/63] hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routing Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 32/63] tests/acpi: Allow update of DSDT.cxl Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 33/63] hw/cxl: Add QTG _DSM support for ACPI0017 device Michael S. Tsirkin
2023-10-04 17:46 ` Thomas Huth
2023-10-04 22:14 ` Michael S. Tsirkin
2023-10-04 23:09 ` [PATCH v3] " Dave Jiang
2023-10-05 3:36 ` Michael S. Tsirkin
2023-10-05 16:11 ` Dave Jiang
2023-10-05 16:32 ` Michael S. Tsirkin
2023-10-06 12:09 ` Jonathan Cameron via
2023-10-06 12:09 ` Jonathan Cameron
2023-10-06 17:50 ` Dan Williams
2023-10-06 22:15 ` [PATCH v4] " Dave Jiang
2023-10-09 15:47 ` Jonathan Cameron via
2023-10-09 15:47 ` Jonathan Cameron
2023-10-09 16:06 ` Dave Jiang
2023-10-09 15:44 ` [PATCH v3] " Jonathan Cameron via
2023-10-09 15:44 ` Jonathan Cameron
2023-10-07 21:17 ` Michael S. Tsirkin
2023-10-09 15:40 ` Jonathan Cameron via
2023-10-09 15:40 ` Jonathan Cameron
2023-10-05 17:00 ` Michael S. Tsirkin
2023-10-04 8:44 ` [PULL 34/63] tests/acpi: Update DSDT.cxl with QTG DSM Michael S. Tsirkin
2023-10-04 8:44 ` Michael S. Tsirkin [this message]
2023-10-04 8:45 ` [PULL 36/63] hw/acpi/cpu: Have build_cpus_aml() take a build_madt_cpu_fn callback Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 37/63] hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual method Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 38/63] hw/acpi/acpi_dev_interface: Remove now unused #include "hw/boards.h" Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 39/63] hw/i386: Remove now redundant TYPE_ACPI_GED_X86 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 40/63] hw/i386/acpi-build: Determine SMI command port just once Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 41/63] hw/acpi: Trace GPE access in all device models, not just PIIX4 Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 42/63] hw/acpi/core: Trace enable and status registers of GPE separately Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 43/63] vdpa: fix gcc cvq_isolated uninitialized variable warning Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 44/63] vdpa net: zero vhost_vdpa iova_tree pointer at cleanup Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 45/63] hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 46/63] hw/cxl: Add utility functions decoder interleave ways and target count Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 47/63] hw/cxl: Fix and use same calculation for HDM decoder block size everywhere Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 48/63] hw/cxl: Support 4 HDM decoders at all levels of topology Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 49/63] hw/pci-bridge/cxl-upstream: Add serial number extended capability support Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 50/63] vdpa net: fix error message setting virtio status Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 51/63] vdpa net: stop probing if cannot set features Michael S. Tsirkin
2023-10-04 8:45 ` [PULL 52/63] vdpa net: follow VirtIO initialization properly at cvq isolation probing Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 53/63] amd_iommu: Fix APIC address check Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 54/63] hw/i386/pc: improve physical address space bound check for 32-bit x86 systems Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 55/63] pcie_sriov: unregister_vfs(): fix error path Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 56/63] libvhost-user.c: add assertion to vu_message_read_default Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 57/63] virtio: use shadow_avail_idx while checking number of heads Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 58/63] virtio: remove unnecessary thread fence while reading next descriptor Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 59/63] virtio: remove unused next argument from virtqueue_split_read_next_desc() Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 60/63] util/uuid: add a hash function Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 61/63] hw/display: introduce virtio-dmabuf Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 62/63] vhost-user: add shared_object msg Michael S. Tsirkin
2023-10-04 8:46 ` [PULL 63/63] libvhost-user: handle " Michael S. Tsirkin
2023-10-04 8:54 ` [PULL 00/63] virtio,pci: features, cleanups Philippe Mathieu-Daudé
2023-10-04 9:08 ` Michael S. Tsirkin
2023-10-04 8:58 ` Michael S. Tsirkin
2023-10-04 16:26 ` Michael S. Tsirkin
2023-10-04 16:50 ` Stefan Hajnoczi
2023-10-04 17:04 ` Michael S. Tsirkin
2023-10-04 17:40 ` Thomas Huth
2023-10-04 22:23 ` Michael S. Tsirkin
2023-10-05 6:10 ` Thomas Huth
2023-10-04 18:23 ` Stefan Hajnoczi
2023-10-04 17:20 ` Michael S. Tsirkin
2023-10-04 18:29 ` Stefan Hajnoczi
2023-10-04 22:16 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e3eff26e9ebb4aab4045c3b934a2e00d3a8645c6.1696408966.git.mst@redhat.com \
--to=mst@redhat.com \
--cc=anisinha@redhat.com \
--cc=eduardo@habkost.net \
--cc=imammedo@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=shentey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).