Re: [PATCH] hw/net/imx_fec: return 0xffff when accessing non-existing PHY

[Jason Wang <jasowang@redhat.com>]

在 2021/5/3 上午12:03, Guenter Roeck 写道:
> If a PHY does not exist, attempts to read from it should return 0xffff.
> Otherwise the Linux kernel will believe that a PHY is there and select
> the non-existing PHY. This in turn will result in network errors later
> on since the real PHY is not selected or configured.
>
> Since reading from or writing to a non-existing PHY is not an emulation
> error, replace guest error messages with traces.
>
> Fixes: 461c51ad4275 ("Add a phy-num property to the i.MX FEC emulator")
> Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>


Applied.

Thanks


> ---
>   hw/net/imx_fec.c    | 8 +++-----
>   hw/net/trace-events | 2 ++
>   2 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
> index f03450c028..9c7035bc94 100644
> --- a/hw/net/imx_fec.c
> +++ b/hw/net/imx_fec.c
> @@ -283,9 +283,8 @@ static uint32_t imx_phy_read(IMXFECState *s, int reg)
>       uint32_t phy = reg / 32;
>   
>       if (phy != s->phy_num) {
> -        qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n",
> -                      TYPE_IMX_FEC, __func__, phy);
> -        return 0;
> +        trace_imx_phy_read_num(phy, s->phy_num);
> +        return 0xffff;
>       }
>   
>       reg %= 32;
> @@ -345,8 +344,7 @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val)
>       uint32_t phy = reg / 32;
>   
>       if (phy != s->phy_num) {
> -        qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n",
> -                      TYPE_IMX_FEC, __func__, phy);
> +        trace_imx_phy_write_num(phy, s->phy_num);
>           return;
>       }
>   
> diff --git a/hw/net/trace-events b/hw/net/trace-events
> index baf25ffa7e..ee77238d9e 100644
> --- a/hw/net/trace-events
> +++ b/hw/net/trace-events
> @@ -413,8 +413,10 @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries"
>   i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION"
>   
>   # imx_fec.c
> +imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)"
>   imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]"
>   imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]"
> +imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)"
>   imx_phy_update_link(const char *s) "%s"
>   imx_phy_reset(void) ""
>   imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x"