qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Crosthwaite <crosthwaitepeter@gmail.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, crosthwaite.peter@gmail.com,
	qemu-arm@nongnu.org, pbonzini@redhat.com,
	alistair.francis@xilinx.com
Subject: [Qemu-devel] [PATCH v6 4/6] xilinx_spips: Separate the state struct into a header
Date: Sat, 19 Dec 2015 21:43:36 -0800	[thread overview]
Message-ID: <e78f5c7af68da51568a4e43b99575235cc5200c4.1450570397.git.crosthwaite.peter@gmail.com> (raw)
In-Reply-To: <cover.1450570397.git.crosthwaite.peter@gmail.com>
In-Reply-To: <cover.1450570397.git.crosthwaite.peter@gmail.com>

From: Alistair Francis <alistair.francis@xilinx.com>

Separate out the XilinxSPIPS struct into a separate header
file.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---

 hw/ssi/xilinx_spips.c         | 46 +++------------------------
 include/hw/ssi/xilinx_spips.h | 72 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+), 42 deletions(-)
 create mode 100644 include/hw/ssi/xilinx_spips.h

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index e9471ff..2111719 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -29,6 +29,7 @@
 #include "qemu/fifo8.h"
 #include "hw/ssi/ssi.h"
 #include "qemu/bitops.h"
+#include "hw/ssi/xilinx_spips.h"
 
 #ifndef XILINX_SPIPS_ERR_DEBUG
 #define XILINX_SPIPS_ERR_DEBUG 0
@@ -103,8 +104,6 @@
 
 #define R_MOD_ID            (0xFC / 4)
 
-#define R_MAX (R_MOD_ID+1)
-
 /* size of TXRX FIFOs */
 #define RXFF_A          32
 #define TXFF_A          32
@@ -135,30 +134,6 @@ typedef enum {
 } FlashCMD;
 
 typedef struct {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    MemoryRegion mmlqspi;
-
-    qemu_irq irq;
-    int irqline;
-
-    uint8_t num_cs;
-    uint8_t num_busses;
-
-    uint8_t snoop_state;
-    qemu_irq *cs_lines;
-    SSIBus **spi;
-
-    Fifo8 rx_fifo;
-    Fifo8 tx_fifo;
-
-    uint8_t num_txrx_bytes;
-
-    uint32_t regs[R_MAX];
-} XilinxSPIPS;
-
-typedef struct {
     XilinxSPIPS parent_obj;
 
     uint8_t lqspi_buf[LQSPI_CACHE_SIZE];
@@ -174,19 +149,6 @@ typedef struct XilinxSPIPSClass {
     uint32_t tx_fifo_size;
 } XilinxSPIPSClass;
 
-#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
-#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
-
-#define XILINX_SPIPS(obj) \
-     OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_CLASS(klass) \
-     OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
-
-#define XILINX_QSPIPS(obj) \
-     OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
-
 static inline int num_effective_busses(XilinxSPIPS *s)
 {
     return (s->regs[R_LQSPI_CFG] & LQSPI_CFG_SEP_BUS &&
@@ -257,7 +219,7 @@ static void xilinx_spips_reset(DeviceState *d)
     XilinxSPIPS *s = XILINX_SPIPS(d);
 
     int i;
-    for (i = 0; i < R_MAX; i++) {
+    for (i = 0; i < XLNX_SPIPS_R_MAX; i++) {
         s->regs[i] = 0;
     }
 
@@ -664,7 +626,7 @@ static void xilinx_spips_realize(DeviceState *dev, Error **errp)
     }
 
     memory_region_init_io(&s->iomem, OBJECT(s), xsc->reg_ops, s,
-                          "spi", R_MAX*4);
+                          "spi", XLNX_SPIPS_R_MAX*4);
     sysbus_init_mmio(sbd, &s->iomem);
 
     s->irqline = -1;
@@ -708,7 +670,7 @@ static const VMStateDescription vmstate_xilinx_spips = {
     .fields = (VMStateField[]) {
         VMSTATE_FIFO8(tx_fifo, XilinxSPIPS),
         VMSTATE_FIFO8(rx_fifo, XilinxSPIPS),
-        VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, R_MAX),
+        VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, XLNX_SPIPS_R_MAX),
         VMSTATE_UINT8(snoop_state, XilinxSPIPS),
         VMSTATE_END_OF_LIST()
     }
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
new file mode 100644
index 0000000..dbb9eef
--- /dev/null
+++ b/include/hw/ssi/xilinx_spips.h
@@ -0,0 +1,72 @@
+/*
+ * Header file for the Xilinx Zynq SPI controller
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef XLNX_SPIPS_H
+#define XLNX_SPIPS_H
+
+#include "hw/ssi/ssi.h"
+#include "qemu/fifo8.h"
+
+typedef struct XilinxSPIPS XilinxSPIPS;
+
+#define XLNX_SPIPS_R_MAX        (0x100 / 4)
+
+struct XilinxSPIPS {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    MemoryRegion mmlqspi;
+
+    qemu_irq irq;
+    int irqline;
+
+    uint8_t num_cs;
+    uint8_t num_busses;
+
+    uint8_t snoop_state;
+    qemu_irq *cs_lines;
+    SSIBus **spi;
+
+    Fifo8 rx_fifo;
+    Fifo8 tx_fifo;
+
+    uint8_t num_txrx_bytes;
+
+    uint32_t regs[XLNX_SPIPS_R_MAX];
+};
+
+#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
+#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
+
+#define XILINX_SPIPS(obj) \
+     OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_CLASS(klass) \
+     OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
+
+#define XILINX_QSPIPS(obj) \
+     OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
+
+#endif /* XLNX_SPIPS_H */
-- 
1.9.1

  parent reply	other threads:[~2015-12-20  5:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-20  5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
2015-12-20  5:43 ` [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available Peter Crosthwaite
2016-01-07  0:18   ` Alistair Francis
2016-01-07  0:25     ` Peter Crosthwaite
2016-01-08  0:04       ` Alistair Francis
2016-01-07 16:04   ` Peter Maydell
2015-12-20  5:43 ` [Qemu-devel] [PATCH v6 2/6] m25p80.c: Add sst25wf080 SPI flash device Peter Crosthwaite
2015-12-20  5:43 ` [Qemu-devel] [PATCH v6 3/6] ssi: Move ssi.h into a separate directory Peter Crosthwaite
2015-12-20  5:43 ` Peter Crosthwaite [this message]
2015-12-20  5:43 ` [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices Peter Crosthwaite
2016-01-07 15:55   ` Peter Maydell
2016-01-15 15:21     ` Peter Maydell
2016-01-15 21:32       ` Alistair Francis
2015-12-20  5:43 ` [Qemu-devel] [PATCH v6 6/6] xlnx-ep108: Connect the SPI Flash Peter Crosthwaite

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e78f5c7af68da51568a4e43b99575235cc5200c4.1450570397.git.crosthwaite.peter@gmail.com \
    --to=crosthwaitepeter@gmail.com \
    --cc=alistair.francis@xilinx.com \
    --cc=crosthwaite.peter@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).