Re: [PATCH v3 06/14] tcg/riscv: Implement vector mov/dup{m/i}

[Richard Henderson <richard.henderson@linaro.org>]

On 9/4/24 07:27, LIU Zhiwei wrote:
> @@ -698,6 +704,21 @@ static bool tcg_out_mov(TCGContext *s, TCGType type, TCGReg ret, TCGReg arg)
>       case TCG_TYPE_I64:
>           tcg_out_opc_imm(s, OPC_ADDI, ret, arg, 0);
>           break;
> +    case TCG_TYPE_V64:
> +    case TCG_TYPE_V128:
> +    case TCG_TYPE_V256:
> +        {
> +            int nf = get_vec_type_bytes(type) / riscv_vlenb;
> +
> +            if (nf != 0) {
> +                tcg_debug_assert(is_power_of_2(nf) && nf <= 8);
> +                tcg_out_opc_vi(s, OPC_VMVNR_V, ret, arg, nf - 1, true);
> +            } else {
> +                riscv_set_vec_config_vl(s, type);
> +                tcg_out_opc_vv(s, OPC_VMV_V_V, ret, TCG_REG_V0, arg, true);
> +            }
> +        }
> +        break;

Perhaps

         int lmul = type - riscv_lg2_vlenb;
         int nf = 1 << MIN(lmul, 0);
         tcg_out_opc_vi(s, OPC_VMVNR_V, ret, arg, nf - 1);

Is there a reason to prefer vmv.v.v over vmvnr.v?
Seems like we can always move one vector reg...

> +static void tcg_out_dupi_vec(TCGContext *s, TCGType type, unsigned vece,
> +                                    TCGReg dst, int64_t arg)
> +{
> +    if (arg < 16 && arg >= -16) {
> +        riscv_set_vec_config_vl_vece(s, type, vece);
> +        tcg_out_opc_vi(s, OPC_VMV_V_I, dst, TCG_REG_V0, arg, true);
> +        return;
> +    }
> +    tcg_out_movi(s, TCG_TYPE_I64, TCG_REG_TMP0, arg);
> +    tcg_out_dup_vec(s, type, vece, dst, TCG_REG_TMP0);
> +}

I'll note that 0 and -1 do not require SEW change. I don't know how often that will come 
up, since in my testing with aarch64, we usually needed to swap to TCG_TYPE_V256 anyway.


r~