From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>,
Andrew Geissler <geissonator@gmail.com>,
qemu-arm@nongnu.org, qemu-devel@nongnu.org,
Joel Stanley <joel@jms.id.au>
Subject: Re: [PATCH 1/2] aspeed/smc: Add some tracing
Date: Wed, 26 Feb 2020 15:21:10 +0100 [thread overview]
Message-ID: <ee72256b-8635-41e3-daa5-17ea1b5db9cd@redhat.com> (raw)
In-Reply-To: <20200206112645.21275-2-clg@kaod.org>
On 2/6/20 12:26 PM, Cédric Le Goater wrote:
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
> Makefile.objs | 1 +
> hw/ssi/aspeed_smc.c | 17 +++++++++++++++++
> hw/ssi/trace-events | 9 +++++++++
> 3 files changed, 27 insertions(+)
> create mode 100644 hw/ssi/trace-events
>
> diff --git a/Makefile.objs b/Makefile.objs
> index 26b9cff95436..9e4ba95794e9 100644
> --- a/Makefile.objs
> +++ b/Makefile.objs
> @@ -168,6 +168,7 @@ trace-events-subdirs += hw/scsi
> trace-events-subdirs += hw/sd
> trace-events-subdirs += hw/sparc
> trace-events-subdirs += hw/sparc64
> +trace-events-subdirs += hw/ssi
> trace-events-subdirs += hw/timer
> trace-events-subdirs += hw/tpm
> trace-events-subdirs += hw/usb
> diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
> index 23c8d2f06245..e5621bf728ca 100644
> --- a/hw/ssi/aspeed_smc.c
> +++ b/hw/ssi/aspeed_smc.c
> @@ -31,6 +31,7 @@
> #include "qapi/error.h"
> #include "exec/address-spaces.h"
> #include "qemu/units.h"
> +#include "trace.h"
>
> #include "hw/irq.h"
> #include "hw/qdev-properties.h"
> @@ -513,6 +514,8 @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs,
>
> s->ctrl->reg_to_segment(s, new, &seg);
>
> + trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size);
> +
> /* The start address of CS0 is read-only */
> if (cs == 0 && seg.addr != s->ctrl->flash_window_base) {
> qemu_log_mask(LOG_GUEST_ERROR,
> @@ -753,6 +756,8 @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
> __func__, aspeed_smc_flash_mode(fl));
> }
>
> + trace_aspeed_smc_flash_read(fl->id, addr, size, ret,
> + aspeed_smc_flash_mode(fl));
> return ret;
> }
>
> @@ -808,6 +813,9 @@ static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data,
> AspeedSMCState *s = fl->controller;
> uint8_t addr_width = aspeed_smc_flash_is_4byte(fl) ? 4 : 3;
>
> + trace_aspeed_smc_do_snoop(fl->id, s->snoop_index, s->snoop_dummies,
> + (uint8_t) data & 0xff);
> +
> if (s->snoop_index == SNOOP_OFF) {
> return false; /* Do nothing */
>
> @@ -858,6 +866,9 @@ static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data,
> AspeedSMCState *s = fl->controller;
> int i;
>
> + trace_aspeed_smc_flash_write(fl->id, addr, size, data,
> + aspeed_smc_flash_mode(fl));
> +
> if (!aspeed_smc_is_writable(fl)) {
> qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%"
> HWADDR_PRIx "\n", __func__, addr);
> @@ -972,6 +983,9 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
> (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) ||
> (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) ||
> (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) {
> +
> + trace_aspeed_smc_read(addr, size, s->regs[addr]);
> +
> return s->regs[addr];
> } else {
> qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
> @@ -1091,6 +1105,7 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
> __func__, s->regs[R_DMA_FLASH_ADDR]);
> return;
> }
> + trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data);
>
> /*
> * When the DMA is on-going, the DMA registers are updated
> @@ -1225,6 +1240,8 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
>
> addr >>= 2;
>
> + trace_aspeed_smc_write(addr, size, data);
> +
> if (addr == s->r_conf ||
> (addr >= s->r_timings &&
> addr < s->r_timings + s->ctrl->nregs_timings) ||
> diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
> new file mode 100644
> index 000000000000..ffe531a500aa
> --- /dev/null
> +++ b/hw/ssi/trace-events
> @@ -0,0 +1,9 @@
> +# aspeed_smc.c
> +
> +aspeed_smc_flash_set_segment(int cs, uint64_t reg, uint64_t start, uint64_t end) "CS%d segreg=0x%"PRIx64" [ 0x%"PRIx64" - 0x%"PRIx64" ]"
> +aspeed_smc_flash_read(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d"
> +aspeed_smc_do_snoop(int cs, int index, int dummies, int data) "CS%d index:0x%x dummies:%d data:0x%x"
> +aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d"
> +aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
> +aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x"
> +aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
next prev parent reply other threads:[~2020-02-26 14:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 11:26 [PATCH 0/2] aspeed/smc: fix data corruption on witherspoon machines Cédric Le Goater
2020-02-06 11:26 ` [PATCH 1/2] aspeed/smc: Add some tracing Cédric Le Goater
2020-02-20 4:00 ` Andrew Jeffery
2020-02-26 3:45 ` Joel Stanley
2020-02-26 14:21 ` Philippe Mathieu-Daudé [this message]
2020-02-06 11:26 ` [PATCH 2/2] aspeed/smc: Fix User mode select/unselect scheme Cédric Le Goater
2020-02-20 4:05 ` Andrew Jeffery
2020-03-09 16:32 ` [PATCH 0/2] aspeed/smc: fix data corruption on witherspoon machines Cédric Le Goater
2020-03-09 16:53 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ee72256b-8635-41e3-daa5-17ea1b5db9cd@redhat.com \
--to=philmd@redhat.com \
--cc=andrew@aj.id.au \
--cc=clg@kaod.org \
--cc=geissonator@gmail.com \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).