qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Maxim Levitsky <mlevitsk@redhat.com>
To: Markus Armbruster <armbru@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
	qemu-block@nongnu.org, qemu-devel@nongnu.org,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	Max Reitz <mreitz@redhat.com>, Gerd Hoffmann <kraxel@redhat.com>
Subject: Re: [PATCH v3 03/13] monitor/hmp: rename device-hotplug.c to block/monitor/block-hmp-cmds.c
Date: Wed, 29 Jan 2020 13:31:15 +0200	[thread overview]
Message-ID: <f0576992600c9be2f2644ec1086c0b921d3fc741.camel@redhat.com> (raw)
In-Reply-To: <87lfpq7ef2.fsf@dusky.pond.sub.org>

On Wed, 2020-01-29 at 11:19 +0100, Markus Armbruster wrote:
> Maxim Levitsky <mlevitsk@redhat.com> writes:
> 
> > On Tue, 2020-01-28 at 16:56 +0000, Dr. David Alan Gilbert wrote:
> > > * Maxim Levitsky (mlevitsk@redhat.com) wrote:
> > > > These days device-hotplug.c only contains the hmp_drive_add
> > > > In the next patch, rest of hmp_drive* functions will be moved
> > > > there.
> > > > 
> > > > Also change the license of that file to GPL2+ since most
> > > > of the code that will be moved there is under that license
> > > 
> > > How do we check that's OK?
> > 
> > Currently that code is BSD licensed, and in next patches I will move
> > here GPLv2+ code, and as far as I know combining them gives you GPLv2+
> 
> Yes, it does.
> 
> I'd change the license in the patch that moves in GPLv2+ code.

All right.
> 
> > I wasn't even aware that we have mixed licenses, and so this change was done
> > after Markus pointed this out in the previous patchset review.
> > 
> > Best regards,
> > 	Maxim Levitsky
> > 
> > > 
> > > > Also add block-hmp-commands.h to contain prototypes of these
> > > > functions
> > > > 
> > > > Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
> > > > ---
> > > >  MAINTAINERS                                   |  1 +
> > > >  Makefile.objs                                 |  2 +-
> > > >  block/Makefile.objs                           |  1 +
> > > >  block/monitor/Makefile.objs                   |  1 +
> > > >  .../monitor/block-hmp-cmds.c                  | 23 ++++---------------
> > > >  include/block/block-hmp-commands.h            |  8 +++++++
> > > >  include/sysemu/sysemu.h                       |  3 ---
> > > >  monitor/misc.c                                |  1 +
> > > >  8 files changed, 18 insertions(+), 22 deletions(-)
> > > >  create mode 100644 block/monitor/Makefile.objs
> > > >  rename device-hotplug.c => block/monitor/block-hmp-cmds.c (55%)
> > > >  create mode 100644 include/block/block-hmp-commands.h
> > > > 
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index f6511d5120..5d50d09ad8 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -1882,6 +1882,7 @@ Block QAPI, monitor, command line
> > > >  M: Markus Armbruster <armbru@redhat.com>
> > > >  S: Supported
> > > >  F: blockdev.c
> > > > +F: blockdev-hmp-cmds.c
> > > >  F: block/qapi.c
> > > >  F: qapi/block*.json
> > > >  F: qapi/transaction.json
> > > > diff --git a/Makefile.objs b/Makefile.objs
> > > > index ff396b9209..15209eb6b5 100644
> > > > --- a/Makefile.objs
> > > > +++ b/Makefile.objs
> > > > @@ -48,7 +48,7 @@ common-obj-y += dump/
> > > >  common-obj-y += job-qmp.o
> > > >  common-obj-y += monitor/
> > > >  common-obj-y += net/
> > > > -common-obj-y += qdev-monitor.o device-hotplug.o
> > > > +common-obj-y += qdev-monitor.o
> > > >  common-obj-$(CONFIG_WIN32) += os-win32.o
> > > >  common-obj-$(CONFIG_POSIX) += os-posix.o
> > > >  
> > > > diff --git a/block/Makefile.objs b/block/Makefile.objs
> > > > index 330529b0b7..3f65544a6b 100644
> > > > --- a/block/Makefile.objs
> > > > +++ b/block/Makefile.objs
> > > > @@ -44,6 +44,7 @@ block-obj-y += crypto.o
> > > >  block-obj-y += aio_task.o
> > > >  block-obj-y += backup-top.o
> > > >  block-obj-y += filter-compress.o
> > > > +common-obj-y += monitor/
> > > >  
> > > >  common-obj-y += stream.o
> > > >  
> > > > diff --git a/block/monitor/Makefile.objs b/block/monitor/Makefile.objs
> > > > new file mode 100644
> > > > index 0000000000..0a74f9a8b5
> > > > --- /dev/null
> > > > +++ b/block/monitor/Makefile.objs
> > > > @@ -0,0 +1 @@
> > > > +common-obj-y += block-hmp-cmds.o
> > > > diff --git a/device-hotplug.c b/block/monitor/block-hmp-cmds.c
> > > > similarity index 55%
> > > > rename from device-hotplug.c
> > > > rename to block/monitor/block-hmp-cmds.c
> > > > index 554e4d98db..c65aaa86ea 100644
> > > > --- a/device-hotplug.c
> > > > +++ b/block/monitor/block-hmp-cmds.c
> > > > @@ -1,25 +1,11 @@
> > > >  /*
> > > > - * QEMU device hotplug helpers
> > > > + * Blockdev HMP commands
> > > >   *
> > > >   * Copyright (c) 2004 Fabrice Bellard
> > > >   *
> > > > - * Permission is hereby granted, free of charge, to any person obtaining a copy
> > > > - * of this software and associated documentation files (the "Software"), to deal
> > > > - * in the Software without restriction, including without limitation the rights
> > > > - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> > > > - * copies of the Software, and to permit persons to whom the Software is
> > > > - * furnished to do so, subject to the following conditions:
> > > > - *
> > > > - * The above copyright notice and this permission notice shall be included in
> > > > - * all copies or substantial portions of the Software.
> > > > - *
> > > > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > > > - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > > > - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > > > - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > > > - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> > > > - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> > > > - * THE SOFTWARE.
> > > > + * This work is licensed under the terms of the GNU GPL, version 2.
> > > > + * or (at your option) any later version.
> > > > + * See the COPYING file in the top-level directory.
> > > >   */
> > > >  
> > > >  #include "qemu/osdep.h"
> > > > @@ -33,6 +19,7 @@
> > > >  #include "sysemu/sysemu.h"
> > > >  #include "monitor/monitor.h"
> > > >  #include "block/block_int.h"
> > > > +#include "block/block-hmp-commands.h"
> > > >  
> > > >  
> > > >  void hmp_drive_add(Monitor *mon, const QDict *qdict)
> > > > diff --git a/include/block/block-hmp-commands.h b/include/block/block-hmp-commands.h
> > > > new file mode 100644
> > > > index 0000000000..4f9033a8a6
> > > > --- /dev/null
> > > > +++ b/include/block/block-hmp-commands.h
> > > > @@ -0,0 +1,8 @@
> > > > +#ifndef BLOCK_HMP_COMMANDS_H
> > > > +#define BLOCK_HMP_COMMANDS_H
> > > > +
> > > > +/* HMP commands related to the block layer*/
> 
> Space before */, please.
No problem!
> 
> > > Should this file get a copyright header as well?
> 
> I think it should.
I'll add. GPLv2+ too I guess.
> 
> > > > +
> > > > +void hmp_drive_add(Monitor *mon, const QDict *qdict);
> > > > +
> > > > +#endif
> > > > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> > > > index 80c57fdc4e..c48635666d 100644
> > > > --- a/include/sysemu/sysemu.h
> > > > +++ b/include/sysemu/sysemu.h
> > > > @@ -68,9 +68,6 @@ extern int nb_option_roms;
> > > >  extern const char *prom_envs[MAX_PROM_ENVS];
> > > >  extern unsigned int nb_prom_envs;
> > > >  
> > > > -/* generic hotplug */
> > > > -void hmp_drive_add(Monitor *mon, const QDict *qdict);
> > > > -
> > > >  /* pcie aer error injection */
> > > >  void hmp_pcie_aer_inject_error(Monitor *mon, const QDict *qdict);
> > > >  
> > > > diff --git a/monitor/misc.c b/monitor/misc.c
> > > > index de1ca4d114..0466c00830 100644
> > > > --- a/monitor/misc.c
> > > > +++ b/monitor/misc.c
> > > > @@ -79,6 +79,7 @@
> > > >  #include "sysemu/cpus.h"
> > > >  #include "qemu/cutils.h"
> > > >  #include "tcg/tcg.h"
> > > > +#include "block/block-hmp-commands.h"
> 
> Put this next to #include "block/qapi.h", please.
Also no problem!
> 
> > > >  
> > > >  #if defined(TARGET_S390X)
> > > >  #include "hw/s390x/storage-keys.h"
> > > > -- 
> > > > 2.17.2
> > > > 
> 
> Preferably with my nitpicks addressed:
> Reviewed-by: Markus Armbruster <armbru@redhat.com>

Thank you very much for the review.
Best regards,
	Maxim Levitsky




  reply	other threads:[~2020-01-29 11:32 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 10:36 [PATCH v3 00/13] RFC: [for 5.0]: HMP monitor handlers cleanups Maxim Levitsky
2020-01-27 10:36 ` [PATCH v3 01/13] usb/dev-storage: remove unused include Maxim Levitsky
2020-01-27 10:49   ` Philippe Mathieu-Daudé
2020-01-27 10:36 ` [PATCH v3 02/13] monitor/hmp: uninline add_init_drive Maxim Levitsky
2020-01-27 10:36 ` [PATCH v3 03/13] monitor/hmp: rename device-hotplug.c to block/monitor/block-hmp-cmds.c Maxim Levitsky
2020-01-28 16:56   ` Dr. David Alan Gilbert
2020-01-28 19:28     ` Maxim Levitsky
2020-01-29 10:19       ` Markus Armbruster
2020-01-29 11:31         ` Maxim Levitsky [this message]
2020-01-27 10:36 ` [PATCH v3 04/13] monitor/hmp: move hmp_drive_del and hmp_commit to block-hmp-cmds.c Maxim Levitsky
2020-01-28 17:51   ` Dr. David Alan Gilbert
2020-01-28 19:29     ` Maxim Levitsky
2020-01-27 10:36 ` [PATCH v3 05/13] monitor/hmp: move hmp_drive_mirror and hmp_drive_backup " Maxim Levitsky
2020-01-28 17:59   ` Dr. David Alan Gilbert
2020-01-27 10:36 ` [PATCH v3 06/13] monitor/hmp: move hmp_block_job* " Maxim Levitsky
2020-01-28 18:11   ` Dr. David Alan Gilbert
2020-01-28 18:15   ` Dr. David Alan Gilbert
2020-01-27 10:36 ` [PATCH v3 07/13] monitor/hmp: move hmp_snapshot_* " Maxim Levitsky
2020-01-28 18:53   ` Dr. David Alan Gilbert
2020-01-27 10:36 ` [PATCH v3 08/13] monitor/hmp: move hmp_nbd_server* " Maxim Levitsky
2020-01-28 18:56   ` Dr. David Alan Gilbert
2020-01-28 20:05     ` Eric Blake
2020-01-27 10:36 ` [PATCH v3 09/13] monitor/hmp: move remaining hmp_block* functions " Maxim Levitsky
2020-01-28 18:45   ` Dr. David Alan Gilbert
2020-01-28 18:51   ` Dr. David Alan Gilbert
2020-01-27 10:36 ` [PATCH v3 10/13] monitor/hmp: move hmp_info_block* " Maxim Levitsky
2020-01-28 19:00   ` Dr. David Alan Gilbert
2020-01-27 10:36 ` [PATCH v3 11/13] monitor: Move hmp_drive_add_node " Maxim Levitsky
2020-01-28 19:03   ` Dr. David Alan Gilbert
2020-01-28 19:30     ` Maxim Levitsky
2020-01-27 10:36 ` [PATCH v3 12/13] add 'error' prefix to vreport Maxim Levitsky
2020-01-28 19:30   ` Maxim Levitsky
2020-01-29 10:38     ` Markus Armbruster
2020-01-29 10:58       ` Maxim Levitsky
2020-01-27 10:36 ` [PATCH v3 13/13] monitor/hmp: Prefer to use hmp_handle_error for error reporting in block hmp commands Maxim Levitsky
2020-01-28 19:31   ` Maxim Levitsky
2020-01-29 10:27     ` Markus Armbruster
2020-01-29 11:05       ` Maxim Levitsky
2020-01-27 10:55 ` [PATCH v3 00/13] RFC: [for 5.0]: HMP monitor handlers cleanups no-reply
2020-01-27 10:59   ` Maxim Levitsky
2020-01-27 19:39 ` John Snow
2020-01-27 20:43   ` Peter Krempa
2020-01-27 21:01     ` John Snow
2020-01-28  9:13       ` Ján Tomko
2020-01-28 16:47       ` Dr. David Alan Gilbert
2020-02-05 23:25         ` John Snow
2020-02-06  9:35           ` Dr. David Alan Gilbert
2020-01-28  8:17     ` Markus Armbruster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f0576992600c9be2f2644ec1086c0b921d3fc741.camel@redhat.com \
    --to=mlevitsk@redhat.com \
    --cc=armbru@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).