[Qemu-devel] Sparc64 progress

[Qemu-devel] Sparc64 progress

[Blue Swirl]

Hi,

With Qemu r4780 and OpenBIOS r201 I get the following output on serial console:
./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
OpenBIOS for Sparc64
Initializing PCI devices...
ide0: [io ports 0x1f0-0x1f7,0x3f6]
ide1: [io ports 0x170-0x177,0x376]
    drive0 [ATAPI cdrom]: QEMU DVD-ROM
floppy_init
FDC is a S82078B
floppy_reset
floppy_motor_off
SENSEI 20 00
status = 80, reply_buffer= 20 0
fdc_specify
FD_SPECIFY(c1, 11)
set_drive status = 80, new_dor = 10
floppy_recalibrate
fdc_state.version = 0062
Nvram id QEMU_BIOS, version 3
kernel addr 404000 size 4d4640
CPUs: 1 x SUNW,UltraSPARC-II
force boot
[sparc64] Kernel already loaded
NULL ihandleNULL ihandle
PROMLIB: Sun IEEE Boot Prom ''
PROMLIB: Root node compatible: sun4u
Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
console [earlyprom0] enabled
ARCH: SUN4U
Ethernet address: 52:54:00:12:34:56
Kernel: Using 2 locked TLB entries for main kernel image.
Remapping the kernel... NULL ihandleSegmentation fault

Re: [Qemu-devel] Sparc64 progress

[Mulyadi Santosa]

On Tue, Jul 15, 2008 at 10:15 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
> ARCH: SUN4U
> Ethernet address: 52:54:00:12:34:56
> Kernel: Using 2 locked TLB entries for main kernel image.
> Remapping the kernel... NULL ihandleSegmentation fault

Awwww... well, i think it shows some progresses.... I appreciate your
work, BlueSwirl... too bad I already "abandoned" my Sun Solaris
project.

regards,

Mulyadi.

Re: [Qemu-devel] Sparc64 progress

[Jonathan Kalbfeld]

I am almost given up on getting it to work on Sparc/Solaris since it
still seems to core dump. :-(

jonathan

On Wed, Jul 16, 2008 at 12:26 AM, Mulyadi Santosa
<mulyadi.santosa@gmail.com> wrote:
> On Tue, Jul 15, 2008 at 10:15 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
>> ARCH: SUN4U
>> Ethernet address: 52:54:00:12:34:56
>> Kernel: Using 2 locked TLB entries for main kernel image.
>> Remapping the kernel... NULL ihandleSegmentation fault
>
> Awwww... well, i think it shows some progresses.... I appreciate your
> work, BlueSwirl... too bad I already "abandoned" my Sun Solaris
> project.
>
> regards,
>
> Mulyadi.
>
>
>



-- 
--
Jonathan Kalbfeld
ThoughtWave Technologies LLC
www.thoughtwave.com
+1 424 354 1814

Learn UNIX For Free at unixlessons.com

Re: [Qemu-devel] Sparc64 progress

[Aurelien Jarno]

Blue Swirl a écrit :
> Hi,
> 
> With Qemu r4780 and OpenBIOS r201 I get the following output on serial console:
> ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
> OpenBIOS for Sparc64
> Initializing PCI devices...
> ide0: [io ports 0x1f0-0x1f7,0x3f6]
> ide1: [io ports 0x170-0x177,0x376]
>     drive0 [ATAPI cdrom]: QEMU DVD-ROM
> floppy_init
> FDC is a S82078B
> floppy_reset
> floppy_motor_off
> SENSEI 20 00
> status = 80, reply_buffer= 20 0
> fdc_specify
> FD_SPECIFY(c1, 11)
> set_drive status = 80, new_dor = 10
> floppy_recalibrate
> fdc_state.version = 0062
> Nvram id QEMU_BIOS, version 3
> kernel addr 404000 size 4d4640
> CPUs: 1 x SUNW,UltraSPARC-II
> force boot
> [sparc64] Kernel already loaded
> NULL ihandleNULL ihandle
> PROMLIB: Sun IEEE Boot Prom ''
> PROMLIB: Root node compatible: sun4u
> Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
> 3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
> console [earlyprom0] enabled
> ARCH: SUN4U
> Ethernet address: 52:54:00:12:34:56
> Kernel: Using 2 locked TLB entries for main kernel image.
> Remapping the kernel... NULL ihandleSegmentation fault
> 

Thanks for you work it's a huge progress.

I have just tried here, with a Debian Lenny kernel, and the kernel
doesn't print anything. Would it be possible to share your kernel config?

It seems the "NULL ihandle" message is printed by OpenBios, so I guess
the kernel simply exits because it does not find what it needs in the
device tree.

-- 
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   aurel32@debian.org         | aurelien@aurel32.net
   `-    people.debian.org/~aurel32 | www.aurel32.net

Re: [Qemu-devel] Sparc64 progress

[Markus Dahms]

Hi,

> With Qemu r4780 and OpenBIOS r201 I get the following output on serial
> console:
> ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio

nice progress. Sadly I can't reproduce it here (still ia32, gcc-3.4), gdb
isn't really helpful for me:

| $ gdb qemu-system-sparc64
| (gdb) run -L . -kernel vmlinuz-2.6.18-6-sparc64-smp -serial stdio
| OpenBIOS for Sparc64
|
| Program received signal SIGSEGV, Segmentation fault.
| [Switching to Thread 0xb7b306b0 (LWP 7734)]
| 0x08146ea3 in ?? ()
| (gdb) bt
| #0  0x08146ea3 in ?? ()
| #1  0xab2a95a8 in ?? ()
| #2  0x0891f204 in ?? ()
| #3  0x00000000 in ?? ()
| (gdb) 

You may find a log with "-d op,exec,cpu,out_asm,in_asm,int" at
http://automagically.de/files/qemu-sparc64.log (~ 1.4 MB)

For the longer term, do you plan to add support for the SBus-based
Sun4u machines? At least for the Ultra 1 most of the hardware is
already emulated for Sun4m (esp, le, cg6...)... For the U1E/U2
isn't much needed either (hme, perhaps some fas bits in esp)...
Just a lot of glue missing ;)

Markus

-- 
ubuntu is an ancient african word meaning "i can't install debian."
                                                         -- unknown

Re: [Qemu-devel] Sparc64 progress

[Blue Swirl]

[-- Attachment #1: Type: text/plain, Size: 1833 bytes --]

On 7/16/08, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Blue Swirl a écrit :
>
> > Hi,
>  >
>  > With Qemu r4780 and OpenBIOS r201 I get the following output on serial console:
>  > ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
>  > OpenBIOS for Sparc64
>  > Initializing PCI devices...
>  > ide0: [io ports 0x1f0-0x1f7,0x3f6]
>  > ide1: [io ports 0x170-0x177,0x376]
>  >     drive0 [ATAPI cdrom]: QEMU DVD-ROM
>  > floppy_init
>  > FDC is a S82078B
>  > floppy_reset
>  > floppy_motor_off
>  > SENSEI 20 00
>  > status = 80, reply_buffer= 20 0
>  > fdc_specify
>  > FD_SPECIFY(c1, 11)
>  > set_drive status = 80, new_dor = 10
>  > floppy_recalibrate
>  > fdc_state.version = 0062
>  > Nvram id QEMU_BIOS, version 3
>  > kernel addr 404000 size 4d4640
>  > CPUs: 1 x SUNW,UltraSPARC-II
>  > force boot
>  > [sparc64] Kernel already loaded
>  > NULL ihandleNULL ihandle
>  > PROMLIB: Sun IEEE Boot Prom ''
>  > PROMLIB: Root node compatible: sun4u
>  > Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
>  > 3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
>  > console [earlyprom0] enabled
>  > ARCH: SUN4U
>  > Ethernet address: 52:54:00:12:34:56
>  > Kernel: Using 2 locked TLB entries for main kernel image.
>  > Remapping the kernel... NULL ihandleSegmentation fault
>  >
>
>
> Thanks for you work it's a huge progress.
>
>  I have just tried here, with a Debian Lenny kernel, and the kernel
>  doesn't print anything. Would it be possible to share your kernel config?

Sure, attached. The kernel is unmodified 2.6.25.10 from kernel.org.

>  It seems the "NULL ihandle" message is printed by OpenBios, so I guess
>  the kernel simply exits because it does not find what it needs in the
>  device tree.

Yes, mmu node does not have "translate" and "SUNW,dtlb-load" methods.
I'm working on it.

[-- Attachment #2: config --]
[-- Type: application/octet-stream, Size: 30858 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25.10
# Fri Jul 11 21:24:38 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_IOMMU_HELPER=y
CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_GENERIC_HARDIRQS=y

#
# General machine setup
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
# CONFIG_SUN_LDOMS is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_SUN_OPENPROMFS=y
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
# CONFIG_BINFMT_AOUT32 is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_SOLARIS_EMUL is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_CMDLINE_BOOL is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_SUNBPP=y
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SUNLANCE=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#

#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
# CONFIG_SERIAL_SUNSU is not set
# CONFIG_SERIAL_SUNSAB is not set
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_SBUS=y
CONFIG_FB_BW2=y
CONFIG_FB_CG3=y
CONFIG_FB_CG6=y
# CONFIG_FB_FFB is not set
CONFIG_FB_TCX=y
CONFIG_FB_CG14=y
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
# CONFIG_FB_XVR500 is not set
# CONFIG_FB_XVR2500 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_SUN_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=y
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# ALSA Sparc devices
#
# CONFIG_SND_SUN_AMD7930 is not set
CONFIG_SND_SUN_CS4231=y
# CONFIG_SND_SUN_DBRI is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
# CONFIG_OBP_FLASH is not set
CONFIG_SUN_BPP=y
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: [Qemu-devel] Sparc64 progress

[Blue Swirl]

On 7/16/08, Markus Dahms <mad@automagically.de> wrote:
> Hi,
>
>  > With Qemu r4780 and OpenBIOS r201 I get the following output on serial
>  > console:
>  > ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
>
>
> nice progress. Sadly I can't reproduce it here (still ia32, gcc-3.4), gdb
>  isn't really helpful for me:
>
>  | $ gdb qemu-system-sparc64
>  | (gdb) run -L . -kernel vmlinuz-2.6.18-6-sparc64-smp -serial stdio
>  | OpenBIOS for Sparc64
>  |
>  | Program received signal SIGSEGV, Segmentation fault.
>  | [Switching to Thread 0xb7b306b0 (LWP 7734)]
>  | 0x08146ea3 in ?? ()
>  | (gdb) bt
>  | #0  0x08146ea3 in ?? ()
>  | #1  0xab2a95a8 in ?? ()
>  | #2  0x0891f204 in ?? ()
>  | #3  0x00000000 in ?? ()
>  | (gdb)
>
>  You may find a log with "-d op,exec,cpu,out_asm,in_asm,int" at
>  http://automagically.de/files/qemu-sparc64.log (~ 1.4 MB)
>
>  For the longer term, do you plan to add support for the SBus-based
>  Sun4u machines? At least for the Ultra 1 most of the hardware is
>  already emulated for Sun4m (esp, le, cg6...)... For the U1E/U2
>  isn't much needed either (hme, perhaps some fas bits in esp)...
>  Just a lot of glue missing ;)

Well, for now I try to get things working on a maximally PC-like
system (PCI, IDE, VGA, serial). After that (or if the approach fails)
more machines could be added.

Re: [Qemu-devel] Sparc64 progress

[Blue Swirl]

On 7/16/08, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Blue Swirl a écrit :
>
> > Hi,
>  >
>  > With Qemu r4780 and OpenBIOS r201 I get the following output on serial console:
>  > ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
>  > OpenBIOS for Sparc64
>  > Initializing PCI devices...
>  > ide0: [io ports 0x1f0-0x1f7,0x3f6]
>  > ide1: [io ports 0x170-0x177,0x376]
>  >     drive0 [ATAPI cdrom]: QEMU DVD-ROM
>  > floppy_init
>  > FDC is a S82078B
>  > floppy_reset
>  > floppy_motor_off
>  > SENSEI 20 00
>  > status = 80, reply_buffer= 20 0
>  > fdc_specify
>  > FD_SPECIFY(c1, 11)
>  > set_drive status = 80, new_dor = 10
>  > floppy_recalibrate
>  > fdc_state.version = 0062
>  > Nvram id QEMU_BIOS, version 3
>  > kernel addr 404000 size 4d4640
>  > CPUs: 1 x SUNW,UltraSPARC-II
>  > force boot
>  > [sparc64] Kernel already loaded
>  > NULL ihandleNULL ihandle
>  > PROMLIB: Sun IEEE Boot Prom ''
>  > PROMLIB: Root node compatible: sun4u
>  > Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
>  > 3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
>  > console [earlyprom0] enabled
>  > ARCH: SUN4U
>  > Ethernet address: 52:54:00:12:34:56
>  > Kernel: Using 2 locked TLB entries for main kernel image.
>  > Remapping the kernel... NULL ihandleSegmentation fault
>  >
>
>
> Thanks for you work it's a huge progress.
>
>  I have just tried here, with a Debian Lenny kernel, and the kernel
>  doesn't print anything. Would it be possible to share your kernel config?

Now with Qemu r4881 and OpenBIOS r204 I get:
[sparc64] Kernel already loaded

PROMLIB: Sun IEEE Boot Prom ''
PROMLIB: Root node compatible: sun4u
Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
console [earlyprom0] enabled
ARCH: SUN4U
Ethernet address: 52:54:00:12:34:56
Kernel: Using 2 locked TLB entries for main kernel image.
Remapping the kernel... done.

Output with Lenny Beta 2 kernel 2.6.24-1-sparc64 (Debian 2.6.24-7):
[sparc64] Kernel already loaded

Remapping the kernel... done.

Re: [Qemu-devel] Sparc64 progress

[Blue Swirl]

On 7/16/08, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Blue Swirl a écrit :
>
> > Hi,
>  >
>  > With Qemu r4780 and OpenBIOS r201 I get the following output on serial console:
>  > ./qemu-system-sparc64 -L . -kernel vmlinux-2.6.25.10-sun4u -serial stdio
>  > OpenBIOS for Sparc64
>  > Initializing PCI devices...
>  > ide0: [io ports 0x1f0-0x1f7,0x3f6]
>  > ide1: [io ports 0x170-0x177,0x376]
>  >     drive0 [ATAPI cdrom]: QEMU DVD-ROM
>  > floppy_init
>  > FDC is a S82078B
>  > floppy_reset
>  > floppy_motor_off
>  > SENSEI 20 00
>  > status = 80, reply_buffer= 20 0
>  > fdc_specify
>  > FD_SPECIFY(c1, 11)
>  > set_drive status = 80, new_dor = 10
>  > floppy_recalibrate
>  > fdc_state.version = 0062
>  > Nvram id QEMU_BIOS, version 3
>  > kernel addr 404000 size 4d4640
>  > CPUs: 1 x SUNW,UltraSPARC-II
>  > force boot
>  > [sparc64] Kernel already loaded
>  > NULL ihandleNULL ihandle
>  > PROMLIB: Sun IEEE Boot Prom ''
>  > PROMLIB: Root node compatible: sun4u
>  > Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
>  > 3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
>  > console [earlyprom0] enabled
>  > ARCH: SUN4U
>  > Ethernet address: 52:54:00:12:34:56
>  > Kernel: Using 2 locked TLB entries for main kernel image.
>  > Remapping the kernel... NULL ihandleSegmentation fault
>  >
>
>
> Thanks for you work it's a huge progress.
>
>  I have just tried here, with a Debian Lenny kernel, and the kernel
>  doesn't print anything. Would it be possible to share your kernel config?
>
>  It seems the "NULL ihandle" message is printed by OpenBios, so I guess
>  the kernel simply exits because it does not find what it needs in the
>  device tree.

With Qemu r4883 and OpenBIOS r208 I get
[sparc64] Kernel already loaded

PROMLIB: Sun IEEE Boot Prom ''
PROMLIB: Root node compatible: sun4u
Linux version 2.6.25.10 (test@host) (gcc version 3.4.6 (Debian
3.4.6-5)) #4 Tue Jul 15 14:41:01 UTC 2008
console [earlyprom0] enabled
ARCH: SUN4U
Ethernet address: 52:54:00:12:34:56
Kernel: Using 2 locked TLB entries for main kernel image.
Remapping the kernel... done.
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000000000
tsk->{mm,active_mm}->pgd = fffff80000891f98
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
swapper(0): Oops [#1]
TSTATE: 0000000880f01606 TPC: 000000000059488c TNPC: 0000000000594890
Y: ffffffff    Not tainted
TPC: <__bzero_tiny+0x8/0x10>
g0: 0000000000810000 g1: ffffffff00000000 g2: 0000000000819878 g3:
0000000000819878
g4: 00000000ffdd2418 g5: 0000000000000000 g6: 0000000000809480 g7:
0000000000000000
o0: fffff800008d6000 o1: 0000ffcff0000000 o2: ffffffffffffffff o3:
fffff800008d6000
o4: 0000000000819800 o5: 0000000000000040 sp: 000000000080c861 ret_pc:
0000000000869708
RPC: <init_bootmem_core+0xf0/0x100>
l0: 00000000008a1088 l1: 000000000088fa58 l2: 0000000000000002 l3:
0000000000000010
l4: fffffffffffffff0 l5: 0000000000000008 l6: 000000000080d1e0 l7:
000000000000000f
i0: 0000ffcff0000000 i1: fffff800008d6000 i2: 0000000000000000 i3:
0007fe7f80000000
i4: 0000ffcff0000000 i5: 0000000000000000 i6: 000000000080c921 i7:
0000000000867230
I7: <paging_init+0xc58/0x1040>
Caller[0000000000867230]: paging_init+0xc58/0x1040
Caller[000000000085f2e8]: setup_arch+0x3f0/0x400
Caller[000000000085854c]: start_kernel+0x74/0x320
Caller[0000000000749564]: tlb_fixup_done+0x88/0x9c
Caller[00000000ffd0e9cc]: 0xffd0e9d4
Instruction DUMP: 90022008  02ca4006  01000000 <d42a2000> 92a26001
124ffffe  90022001  81c3e008  9010000b
Kernel panic - not syncing: Attempted to kill the idle task!
Press Stop-A (L1-A) to return to the boot prom

Booting from Debian 4.0r0 netinst CD:
[sparc64] Booting file '/pci/isa/ide1/cdrom@0,0:a' without parameters.
Not a bootable ELF image
Not a Linux kernel image
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
Jumping to entry point...
SIservice close: argument count error (0 0)
LO Version 1.4.13
\


                  Welcome to Debian GNU/Linux etch!

This is a Debian installation CDROM, built on 20070407-11:37.
Keep it once you have installed your system, as you can boot from it
to repair the system on your hard disk if that ever becomes necessary.

WARNING: You should completely back up all of your hard disks before
  proceeding. The installation procedure can completely and irreversibly
  erase them! If you haven't made backups yet, remove the rescue CD from
  the drive and press L1-A to get back to the OpenBoot prompt.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted
by applicable law.

[ ENTER - Boot install ]   [ Type "expert" - Boot into expert mode ]
                           [ Type "rescue" - Boot into rescue mode ]
boot: Unhandled Exception 0x0000000000000028
PC = 0x000000000038ac64 NPC = 0x000000000038ac68
Stopping execution

Aurora 2.0:
Jumping to entry point...
SILO Version 1.4.11

Decompression error: crc error

Internal error
EXIT
5 >

The above CRC error could indicate a bug in the CPU ALU.