From: "Cédric Le Goater" <clg@kaod.org>
To: "Jamin Lin" <jamin_lin@aspeedtech.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Alistair Francis" <alistair@alistair23.me>,
"Kevin Wolf" <kwolf@redhat.com>,
"Hanna Reitz" <hreitz@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Cleber Rosa" <crosa@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>,
"open list:Block layer core" <qemu-block@nongnu.org>
Cc: troy_lee@aspeedtech.com, yunlin.tang@aspeedtech.com
Subject: Re: [PATCH v3 4/8] hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
Date: Thu, 4 Jul 2024 11:19:39 +0200 [thread overview]
Message-ID: <f4bce63e-bcb3-4d77-8c8f-629ad0d72f77@kaod.org> (raw)
In-Reply-To: <20240704082922.1464317-5-jamin_lin@aspeedtech.com>
On 7/4/24 10:29 AM, Jamin Lin wrote:
> ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
> And the base address of dram is "0x4 00000000" which
> is 64bits address.
>
> It have "TXDES 2" and "RXDES 2" to save the high part
> physical address of packet buffer.
> Ex: TX packet buffer address [34:0]
> The "TXDES 2" bits [18:16] which corresponds the bits [34:32]
> of the 64 bits address of the TX packet buffer address
> and "TXDES 3" bits [31:0] which corresponds the bits [31:0]
> of the 64 bits address of the TX packet buffer address.
>
> Update TX and RX packet buffers address type to
> 64 bits for dram 64 bits address DMA support.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/net/ftgmac100.c | 21 ++++++++++++++++++---
> 1 file changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c
> index 68956aeb94..80f9cd56d5 100644
> --- a/hw/net/ftgmac100.c
> +++ b/hw/net/ftgmac100.c
> @@ -175,6 +175,8 @@
> #define FTGMAC100_TXDES1_TX2FIC (1 << 30)
> #define FTGMAC100_TXDES1_TXIC (1 << 31)
>
> +#define FTGMAC100_TXDES2_TXBUF_BADR_HI(x) (((x) >> 16) & 0x7)
> +
> /*
> * Receive descriptor
> */
> @@ -208,13 +210,15 @@
> #define FTGMAC100_RXDES1_UDP_CHKSUM_ERR (1 << 26)
> #define FTGMAC100_RXDES1_IP_CHKSUM_ERR (1 << 27)
>
> +#define FTGMAC100_RXDES2_RXBUF_BADR_HI(x) (((x) >> 16) & 0x7)
> +
> /*
> * Receive and transmit Buffer Descriptor
> */
> typedef struct {
> uint32_t des0;
> uint32_t des1;
> - uint32_t des2; /* not used by HW */
> + uint32_t des2; /* used by HW 64 bits DMA */
> uint32_t des3;
> } FTGMAC100Desc;
>
> @@ -531,6 +535,7 @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint64_t tx_ring,
> int frame_size = 0;
> uint8_t *ptr = s->frame;
> uint64_t addr = tx_descriptor;
> + uint64_t buf_addr = 0;
> uint32_t flags = 0;
>
> while (1) {
> @@ -569,7 +574,12 @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint64_t tx_ring,
> len = sizeof(s->frame) - frame_size;
> }
>
> - if (dma_memory_read(&address_space_memory, bd.des3,
> + buf_addr = bd.des3;
> + if (s->dma64) {
> + buf_addr = deposit64(buf_addr, 32, 32,
> + FTGMAC100_TXDES2_TXBUF_BADR_HI(bd.des2));
> + }
> + if (dma_memory_read(&address_space_memory, buf_addr,
> ptr, len, MEMTXATTRS_UNSPECIFIED)) {
> qemu_log_mask(LOG_GUEST_ERROR, "%s: failed to read packet @ 0x%x\n",
> __func__, bd.des3);
> @@ -1022,7 +1032,7 @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf,
> uint32_t flags = 0;
> uint64_t addr;
> uint32_t crc;
> - uint32_t buf_addr;
> + uint64_t buf_addr = 0;
> uint8_t *crc_ptr;
> uint32_t buf_len;
> size_t size = len;
> @@ -1087,7 +1097,12 @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf,
> if (size < 4) {
> buf_len += size - 4;
> }
> +
> buf_addr = bd.des3;
> + if (s->dma64) {
> + buf_addr = deposit64(buf_addr, 32, 32,
> + FTGMAC100_RXDES2_RXBUF_BADR_HI(bd.des2));
> + }
> if (first && proto == ETH_P_VLAN && buf_len >= 18) {
> bd.des1 = lduw_be_p(buf + 14) | FTGMAC100_RXDES1_VLANTAG_AVAIL;
>
next prev parent reply other threads:[~2024-07-04 9:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-04 8:29 [PATCH v3 0/8] support AST2700 network Jamin Lin via
2024-07-04 8:29 ` [PATCH v3 1/8] hw/net:ftgmac100: update memory region size to 64KB Jamin Lin via
2024-07-04 8:53 ` Cédric Le Goater
2024-07-04 8:29 ` [PATCH v3 2/8] hw/net:ftgmac100: update ring base address to 64 bits Jamin Lin via
2024-07-04 9:08 ` Cédric Le Goater
2024-07-04 8:29 ` [PATCH v3 3/8] hw/net:ftgmac100: introduce TX and RX ring base address high registers to support " Jamin Lin via
2024-07-04 8:54 ` Cédric Le Goater
2024-07-04 8:29 ` [PATCH v3 4/8] hw/net:ftgmac100: update TX and RX packet buffers address to " Jamin Lin via
2024-07-04 9:19 ` Cédric Le Goater [this message]
2024-07-04 8:29 ` [PATCH v3 5/8] aspeed/soc: set dma64 property for AST2700 ftgmac100 Jamin Lin via
2024-07-04 8:54 ` Cédric Le Goater
2024-07-04 8:29 ` [PATCH v3 6/8] hw/block: m25p80: support quad mode for w25q01jvq Jamin Lin via
2024-07-04 8:29 ` [PATCH v3 7/8] machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700 Jamin Lin via
2024-07-04 8:54 ` Cédric Le Goater
2024-07-04 8:29 ` [PATCH v3 8/8] machine_aspeed.py: update to test network " Jamin Lin via
2024-07-04 8:54 ` Cédric Le Goater
2024-07-09 9:52 ` [PATCH v3 0/8] support AST2700 network Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4bce63e-bcb3-4d77-8c8f-629ad0d72f77@kaod.org \
--to=clg@kaod.org \
--cc=alistair@alistair23.me \
--cc=andrew@codeconstruct.com.au \
--cc=bleal@redhat.com \
--cc=crosa@redhat.com \
--cc=hreitz@redhat.com \
--cc=jamin_lin@aspeedtech.com \
--cc=jasowang@redhat.com \
--cc=joel@jms.id.au \
--cc=kwolf@redhat.com \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
--cc=wainersm@redhat.com \
--cc=yunlin.tang@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).