From: Richard Henderson <richard.henderson@linaro.org>
To: frank.chang@sifive.com, qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: Alistair Francis <Alistair.Francis@wdc.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
LIU Zhiwei <zhiwei_liu@c-sky.com>,
Sagar Karandikar <sagark@eecs.berkeley.edu>,
Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Subject: Re: [RFC 13/65] target/riscv: rvv-0.9: configure instructions
Date: Fri, 10 Jul 2020 11:06:57 -0700 [thread overview]
Message-ID: <facf726b-d355-b0af-3f7f-5574593aa44c@linaro.org> (raw)
In-Reply-To: <20200710104920.13550-14-frank.chang@sifive.com>
On 7/10/20 3:48 AM, frank.chang@sifive.com wrote:
> -static bool trans_vsetvl(DisasContext *ctx, arg_vsetvl *a)
> +static bool trans_vsetvl(DisasContext *s, arg_vsetvl *a)
Do not mix this change with anything else.
> + rd = tcg_const_i32(a->rd);
> + rs1 = tcg_const_i32(a->rs1);
Any time you put a register number into a tcg const, there's probably a better
way to do things.
> - /* Using x0 as the rs1 register specifier, encodes an infinite AVL */
> - if (a->rs1 == 0) {
> - /* As the mask is at least one bit, RV_VLEN_MAX is >= VLMAX */
> - s1 = tcg_const_tl(RV_VLEN_MAX);
> - } else {
> - s1 = tcg_temp_new();
> - gen_get_gpr(s1, a->rs1);
> - }
E.g. this code should be kept, and add
if (a->rd == 0 && a->rs1 == 0) {
s1 = tcg_temp_new();
tcg_gen_mov_tl(s1, cpu_vl);
} else ...
> + if ((sew > cpu->cfg.elen)
> + || vill
> + || vflmul < ((float)sew / cpu->cfg.elen)
> + || (ediv != 0)
> + || (reserved != 0)) {
> /* only set vill bit. */
> env->vtype = FIELD_DP64(0, VTYPE, VILL, 1);
> - env->vl = 0;
> - env->vstart = 0;
> return 0;
> }
You do need to check 0.7.1 so long as it's supported.
r~
next prev parent reply other threads:[~2020-07-10 18:07 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 10:48 [RFC 00/65] target/riscv: support vector extension v0.9 frank.chang
2020-07-10 10:48 ` [RFC 01/65] target/riscv: fix rsub gvec tcg_assert_listed_vecop assertion frank.chang
2020-07-10 16:12 ` Richard Henderson
2020-07-10 18:24 ` Alistair Francis
2020-07-10 10:48 ` [RFC 02/65] target/riscv: correct the gvec IR called in gen_vec_rsub16_i64() frank.chang
2020-07-10 16:13 ` Richard Henderson
2020-07-10 10:48 ` [RFC 03/65] target/riscv: fix return value of do_opivx_widen() frank.chang
2020-07-10 16:14 ` Richard Henderson
2020-07-10 10:48 ` [RFC 04/65] target/riscv: fix vill bit index in vtype register frank.chang
2020-07-10 16:15 ` Richard Henderson
2020-07-10 10:48 ` [RFC 05/65] target/riscv: remove vsll.vi, vsrl.vi, vsra.vi insns from using gvec frank.chang
2020-07-10 16:27 ` Richard Henderson
2020-07-14 2:59 ` Frank Chang
2020-07-14 3:35 ` LIU Zhiwei
2020-07-14 4:39 ` Frank Chang
2020-07-14 13:21 ` Richard Henderson
2020-07-14 13:59 ` Frank Chang
2020-07-15 2:52 ` LIU Zhiwei
2020-07-10 10:48 ` [RFC 06/65] target/riscv: rvv-0.9: add vcsr register frank.chang
2020-07-10 17:02 ` Richard Henderson
2020-07-10 10:48 ` [RFC 07/65] target/riscv: rvv-0.9: add vector context status frank.chang
2020-07-10 17:26 ` Richard Henderson
2020-07-10 17:27 ` Richard Henderson
2020-07-10 10:48 ` [RFC 08/65] target/riscv: rvv-0.9: update mstatus_vs by tb_flags frank.chang
2020-07-10 17:28 ` Richard Henderson
2020-07-10 10:48 ` [RFC 09/65] target/riscv: rvv-0.9: add vlenb register frank.chang
2020-07-10 17:31 ` Richard Henderson
2020-07-10 10:48 ` [RFC 10/65] target/riscv: rvv-0.9: remove MLEN calculations frank.chang
2020-07-10 17:32 ` Richard Henderson
2020-07-10 10:48 ` [RFC 11/65] target/riscv: rvv-0.9: add fractional LMUL, VTA and VMA frank.chang
2020-07-10 17:45 ` Richard Henderson
2020-07-10 10:48 ` [RFC 12/65] target/riscv: rvv-0.9: update check functions frank.chang
2020-07-10 17:51 ` Richard Henderson
2020-07-13 2:10 ` Frank Chang
2020-07-10 10:48 ` [RFC 13/65] target/riscv: rvv-0.9: configure instructions frank.chang
2020-07-10 18:06 ` Richard Henderson [this message]
2020-07-13 2:07 ` Frank Chang
2020-07-10 10:48 ` [RFC 14/65] target/riscv: rvv-0.9: stride load and store instructions frank.chang
2020-07-10 18:15 ` Richard Henderson
2020-07-13 2:04 ` Frank Chang
2020-07-10 10:48 ` [RFC 15/65] target/riscv: rvv-0.9: index " frank.chang
2020-07-10 10:48 ` [RFC 16/65] target/riscv: rvv-0.9: fix address index overflow bug of indexed load/store insns frank.chang
2020-07-10 10:48 ` [RFC 17/65] target/riscv: rvv-0.9: fault-only-first unit stride load frank.chang
2020-07-10 10:48 ` [RFC 18/65] target/riscv: rvv-0.9: amo operations frank.chang
2020-07-10 10:48 ` [RFC 19/65] target/riscv: rvv-0.9: load/store whole register instructions frank.chang
2020-07-10 10:48 ` [RFC 20/65] target/riscv: rvv-0.9: update vext_max_elems() for load/store insns frank.chang
2020-07-10 10:48 ` [RFC 21/65] target/riscv: rvv-0.9: take fractional LMUL into vector max elements calculation frank.chang
2020-07-10 10:48 ` [RFC 22/65] target/riscv: rvv-0.9: floating-point square-root instruction frank.chang
2020-07-10 10:48 ` [RFC 23/65] target/riscv: rvv-0.9: floating-point classify instructions frank.chang
2020-07-10 10:48 ` [RFC 24/65] target/riscv: rvv-0.9: mask population count instruction frank.chang
2020-07-10 10:48 ` [RFC 25/65] target/riscv: rvv-0.9: find-first-set mask bit instruction frank.chang
2020-07-10 10:48 ` [RFC 26/65] target/riscv: rvv-0.9: set-X-first mask bit instructions frank.chang
2020-07-10 10:48 ` [RFC 27/65] target/riscv: rvv-0.9: iota instruction frank.chang
2020-07-10 10:48 ` [RFC 28/65] target/riscv: rvv-0.9: element index instruction frank.chang
2020-07-10 10:48 ` [RFC 29/65] target/riscv: rvv-0.9: integer scalar move instructions frank.chang
2020-07-10 10:48 ` [RFC 30/65] target/riscv: rvv-0.9: floating-point " frank.chang
2020-07-10 10:48 ` [RFC 31/65] target/riscv: rvv-0.9: whole register " frank.chang
2020-07-10 10:48 ` [RFC 32/65] target/riscv: rvv-0.9: integer extension instructions frank.chang
2020-07-10 10:48 ` [RFC 33/65] target/riscv: rvv-0.9: single-width averaging add and subtract instructions frank.chang
2020-07-10 10:48 ` [RFC 34/65] target/riscv: rvv-0.9: integer add-with-carry/subtract-with-borrow frank.chang
2020-07-10 10:48 ` [RFC 35/65] target/riscv: rvv-0.9: narrowing integer right shift instructions frank.chang
2020-07-10 10:48 ` [RFC 36/65] target/riscv: rvv-0.9: widening integer multiply-add instructions frank.chang
2020-07-10 10:48 ` [RFC 37/65] target/riscv: rvv-0.9: quad-widening " frank.chang
2020-07-10 10:48 ` [RFC 38/65] target/riscv: rvv-0.9: integer merge and move instructions frank.chang
2020-07-10 10:48 ` [RFC 39/65] target/riscv: rvv-0.9: single-width saturating add and subtract instructions frank.chang
2020-07-10 10:48 ` [RFC 40/65] target/riscv: rvv-0.9: integer comparison instructions frank.chang
2020-07-10 10:48 ` [RFC 41/65] target/riscv: rvv-0.9: floating-point compare instructions frank.chang
2020-07-10 10:48 ` [RFC 42/65] target/riscv: rvv-0.9: single-width integer reduction instructions frank.chang
2020-07-10 10:48 ` [RFC 43/65] target/riscv: rvv-0.9: widening " frank.chang
2020-07-10 10:48 ` [RFC 44/65] target/riscv: rvv-0.9: mask-register logical instructions frank.chang
2020-07-10 10:48 ` [RFC 45/65] target/riscv: rvv-0.9: register gather instructions frank.chang
2020-07-10 10:49 ` [RFC 46/65] target/riscv: rvv-0.9: slide instructions frank.chang
2020-07-10 10:49 ` [RFC 47/65] target/riscv: rvv-0.9: floating-point " frank.chang
2020-07-10 10:49 ` [RFC 48/65] target/riscv: rvv-0.9: narrowing fixed-point clip instructions frank.chang
2020-07-10 10:49 ` [RFC 49/65] target/riscv: rvv-0.9: floating-point move instructions frank.chang
2020-07-10 10:49 ` [RFC 50/65] target/riscv: rvv-0.9: floating-point/integer type-convert instructions frank.chang
2020-07-10 10:49 ` [RFC 51/65] target/riscv: rvv-0.9: single-width floating-point reduction frank.chang
2020-07-10 10:49 ` [RFC 52/65] target/riscv: rvv-0.9: widening floating-point reduction instructions frank.chang
2020-07-10 10:49 ` [RFC 53/65] target/riscv: rvv-0.9: single-width scaling shift instructions frank.chang
2020-07-10 10:49 ` [RFC 54/65] target/riscv: rvv-0.9: remove widening saturating scaled multiply-add frank.chang
2020-07-10 10:49 ` [RFC 55/65] target/riscv: rvv-0.9: remove vmford.vv and vmford.vf frank.chang
2020-07-10 10:49 ` [RFC 56/65] target/riscv: rvv-0.9: remove integer extract instruction frank.chang
2020-07-10 10:49 ` [RFC 57/65] target/riscv: rvv-0.9: floating-point min/max instructions frank.chang
2020-07-10 18:19 ` Alex Bennée
2020-07-10 10:49 ` [RFC 58/65] target/riscv: rvv-0.9: widening floating-point/integer type-convert frank.chang
2020-07-10 10:49 ` [RFC 59/65] target/riscv: rvv-0.9: narrowing " frank.chang
2020-07-10 10:49 ` [RFC 60/65] softfloat: add fp16 and uint8/int8 interconvert functions frank.chang
2020-07-10 12:07 ` Alex Bennée
2020-07-10 12:15 ` Frank Chang
2020-07-10 12:46 ` Alex Bennée
2020-07-10 13:13 ` Frank Chang
2020-07-10 14:59 ` Alex Bennée
2020-07-10 10:49 ` [RFC 61/65] fpu: fix float16 nan check frank.chang
2020-07-10 10:49 ` [RFC 62/65] fpu: add api to handle alternative sNaN propagation frank.chang
2020-07-10 12:15 ` Alex Bennée
2020-07-13 17:38 ` Chih-Min Chao
2020-07-10 10:49 ` [RFC 63/65] fpu: implement full set compare for fp16 frank.chang
2020-07-10 12:24 ` Alex Bennée
2020-07-10 12:26 ` Alex Bennée
2020-07-14 9:29 ` Chih-Min Chao
2020-07-10 10:49 ` [RFC 64/65] target/riscv: use softfloat lib float16 comparison functions frank.chang
2020-07-10 10:49 ` [RFC 65/65] target/riscv: bump to RVV 0.9 frank.chang
2020-07-10 21:43 ` [RFC 00/65] target/riscv: support vector extension v0.9 Alistair Francis
2020-07-13 2:02 ` Frank Chang
2020-07-13 15:57 ` Alistair Francis
2020-07-13 16:41 ` Richard Henderson
2020-07-13 16:44 ` Frank Chang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=facf726b-d355-b0af-3f7f-5574593aa44c@linaro.org \
--to=richard.henderson@linaro.org \
--cc=Alistair.Francis@wdc.com \
--cc=frank.chang@sifive.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=sagark@eecs.berkeley.edu \
--cc=zhiwei_liu@c-sky.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).