qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "andrzej zaborowski" <balrogg@gmail.com>
To: Michael Opdenacker <michael-lists@free-electrons.com>
Cc: Jan Kiszka <jan.kiszka@googlemail.com>,
	qemu-devel mailing list <qemu-devel@nongnu.org>
Subject: [Qemu-devel] Re: How did you test sound on the Spitz emulation?
Date: Thu, 17 Jul 2008 00:52:07 +0200	[thread overview]
Message-ID: <fb249edb0807161552g41465089qdad23dac97c0850e@mail.gmail.com> (raw)
In-Reply-To: <487E6480.1090102@free-electrons.com>

2008/7/16 Michael Opdenacker <michael-lists@free-electrons.com>:
> Hello qemu developers,
>
> I'm trying to test your implementation of sound support in the Sharp
> Spitz machine emulated by qemu...
>
> The problem is that I haven't managed to find a Linux version in which
> sound works.
>
> Here's the command line I used with Linux 2.6.26:
>
> qemu-system-arm -M spitz -show-cursor -soundhw all -m 256 -mtdblock /dev/null -kernel vmlinuz-arm-spitz-2.6.26 -hda root-arm.ext2 -append "root=/dev/hda rootfstype=ext2 rw"
>
> The kernel, root filesystem and the kernel configuration files can be
> found on http://free-electrons.com/issues/qemu/jul16-2008/ (the upload
> will be complete in less than an hour)
>
> Here's what I get in the kernel log when I try to modprobe the
> snd-soc-spitz module (full log on
> http://free-electrons.com/issues/qemu/jul16-2008/dmesg.log)
>
> ASoC version 0.13.2
> WM8750: WM8750 Audio Codec 0.12
> i2c: error: exhausted retries
> i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
> i2c: ICR: 000007e0 ISR: 00000002
> i2c: log: [00000442:000007e0]
>
> Here are more details after adding I2C debug options (full log on
> http://free-electrons.com/issues/qemu/jul16-2008/dmesg-debug.log)
>
> ASoC version 0.13.2
> WM8750: WM8750 Audio Codec 0.12
> i2c-core: driver [WM8750 I2C Codec] registered
> i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x1b
> i2c-adapter i2c-1: master_xfer[0] W, addr=0x1b, len=0
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c-adapter i2c-1: setting to bus master
> i2c-adapter i2c-1: state:i2c_pxa_handler:876: ISR=00000442,
> ICR=000007e1, IBMR=00
> i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:832: ISR=00000002,
> ICR=000007e0, IBMR=00
> i2c-adapter i2c-1: Retrying transmission
> i2c: error: exhausted retries
> i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
> i2c: ICR: 000007e0 ISR: 00000002
> i2c: log: [00000442:000007e0]
>
> I also tried 2.6.23, 2.6.24 and 2.6.25, but with no success either. I
> both tested qemu 0.9.1 from Ubuntu Hardy and a svn snapshot I compiled
> yesterday (Jul 15, 2008).
>
> How did you test the emulated WM8750 chip on the Spitz machine? Working
> kernel configurations and qemu command line options are welcome!

I tested it with kernels and rootfs'es from pokylinux.org autobuilder,
but they may have stopped working in the meantime. :(
When I last tried to build a kernel for spitz outside OE, I had to
apply ASoC patches from opensource.wolfsonmicro.com because ASoC was
not in mainline yet (2.6.19 I think).

>
> Are there any other options to get both framebuffer and sound support
> with qemu-system-arm?

Not any of those which have full Linux mainline support. Otherwise
there is the PalmT|E (cheetah), MusicPal and Neo1973.

  reply	other threads:[~2008-07-16 22:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-16 21:13 [Qemu-devel] How did you test sound on the Spitz emulation? Michael Opdenacker
2008-07-16 22:52 ` andrzej zaborowski [this message]
2008-07-16 23:14   ` [Qemu-devel] " Jan Kiszka
2008-07-17  9:58   ` Michael Opdenacker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb249edb0807161552g41465089qdad23dac97c0850e@mail.gmail.com \
    --to=balrogg@gmail.com \
    --cc=jan.kiszka@googlemail.com \
    --cc=michael-lists@free-electrons.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).