Re: [PATCH v20 00/11] hw/pci: SR-IOV related fixes and improvements

[Akihiko Odaki <akihiko.odaki@daynix.com>]

Hi Michael,

It has been a while since this series was reviewed by maintainers of 
relevant architectures. Can you check if this series is ready to pull?

Regards,
Akihiko Odaki

On 2025/01/16 18:00, Akihiko Odaki wrote:
> Supersedes: <20240714-rombar-v2-0-af1504ef55de@daynix.com>
> ("[PATCH v2 0/4] hw/pci: Convert rom_bar into OnOffAuto")
> 
> I submitted a RFC series[1] to add support for SR-IOV emulation to
> virtio-net-pci. During the development of the series, I fixed some
> trivial bugs and made improvements that I think are independently
> useful. This series extracts those fixes and improvements from the RFC
> series.
> 
> [1]: https://patchew.org/QEMU/20231210-sriov-v2-0-b959e8a6dfaf@daynix.com/
> 
> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> ---
> Changes in v20:
> - Use qdev_is_realized().
> - Link to v19: https://lore.kernel.org/r/20250109-reuse-v19-0-f541e82ca5f7@daynix.com
> 
> Changes in v19:
> - Avoided inling pci_set_power().
> - Link to v18: https://lore.kernel.org/r/20250104-reuse-v18-0-c349eafd8673@daynix.com
> 
> Changes in v18:
> - Rebased.
> - Link to v17: https://lore.kernel.org/r/20241022-reuse-v17-0-bd7c133237e4@daynix.com
> 
> Changes in v17:
> - Added patch "pcie_sriov: Ensure VF addr does not overflow".
> - Changed not to link VF with sPAPR DRC.
> - Asserted pci_is_vf() when zpci is not found. (Cédric Le Goater)
> - Link to v16: https://lore.kernel.org/r/20240913-reuse-v16-0-d016b4b4f616@daynix.com
> 
> Changes in v16:
> - Added patch "s390x/pci: Avoid creating zpci for VFs".
> - Added patch "s390x/pci: Allow plugging SR-IOV devices".
> - Link to v15: https://lore.kernel.org/r/20240823-reuse-v15-0-eddcb960e289@daynix.com
> 
> Changes in v15:
> - Fixed variable shadowing in patch
>    "pcie_sriov: Remove num_vfs from PCIESriovPF"
> - Link to v14: https://lore.kernel.org/r/20240813-reuse-v14-0-4c15bc6ee0e6@daynix.com
> 
> Changes in v14:
> - Dropped patch "pcie_sriov: Ensure VF function number does not
>    overflow" as I found the restriction it imposes is unnecessary.
> - Link to v13: https://lore.kernel.org/r/20240805-reuse-v13-0-aaeaa4d7dfd2@daynix.com
> 
> Changes in v13:
> - Added patch "s390x/pci: Check for multifunction after device
>    realization". I found SR-IOV devices, which are multifunction devices,
>    are not supposed to work at all with s390x on QEMU.
> - Link to v12: https://lore.kernel.org/r/20240804-reuse-v12-0-d3930c4111b2@daynix.com
> 
> Changes in v12:
> - Changed to ignore invalid PCI_SRIOV_NUM_VF writes as done for
>    PCI_SRIOV_CTRL_VFE.
> - Updated the message for patch "hw/pci: Use -1 as the default value for
>    rombar". (Markus Armbruster)
> - Link to v11: https://lore.kernel.org/r/20240802-reuse-v11-0-fb83bb8c19fb@daynix.com
> 
> Changes in v11:
> - Rebased.
> - Dropped patch "hw/pci: Convert rom_bar into OnOffAuto".
> - Added patch "hw/pci: Use -1 as the default value for rombar".
> - Added for-9.2 to give a testing period for possible breakage with
>    libvirt/s390x.
> - Link to v10: https://lore.kernel.org/r/20240627-reuse-v10-0-7ca0b8ed3d9f@daynix.com
> 
> Changes in v10:
> - Added patch "hw/ppc/spapr_pci: Do not reject VFs created after a PF".
> - Added patch "hw/ppc/spapr_pci: Do not create DT for disabled PCI device".
> - Added patch "hw/pci: Convert rom_bar into OnOffAuto".
> - Dropped patch "hw/pci: Determine if rombar is explicitly enabled".
> - Dropped patch "hw/qdev: Remove opts member".
> - Link to v9: https://lore.kernel.org/r/20240315-reuse-v9-0-67aa69af4d53@daynix.com
> 
> Changes in v9:
> - Rebased.
> - Restored '#include "qapi/error.h"' (Michael S. Tsirkin)
> - Added patch "pcie_sriov: Ensure VF function number does not overflow"
>    to fix abortion with wrong PF addr.
> - Link to v8: https://lore.kernel.org/r/20240228-reuse-v8-0-282660281e60@daynix.com
> 
> Changes in v8:
> - Clarified that "hw/pci: Replace -1 with UINT32_MAX for romsize" is
>    not a bug fix. (Markus Armbruster)
> - Squashed patch "vfio: Avoid inspecting option QDict for rombar" into
>    "hw/pci: Determine if rombar is explicitly enabled".
>    (Markus Armbruster)
> - Noted the minor semantics change for patch "hw/pci: Determine if
>    rombar is explicitly enabled". (Markus Armbruster)
> - Link to v7: https://lore.kernel.org/r/20240224-reuse-v7-0-29c14bcb952e@daynix.com
> 
> Changes in v7:
> - Replaced -1 with UINT32_MAX when expressing uint32_t.
>    (Markus Armbruster)
> - Added patch "hw/pci: Replace -1 with UINT32_MAX for romsize".
> - Link to v6: https://lore.kernel.org/r/20240220-reuse-v6-0-2e42a28b0cf2@daynix.com
> 
> Changes in v6:
> - Fixed migration.
> - Added patch "pcie_sriov: Do not manually unrealize".
> - Restored patch "pcie_sriov: Release VFs failed to realize" that was
>    missed in v5.
> - Link to v5: https://lore.kernel.org/r/20240218-reuse-v5-0-e4fc1c19b5a9@daynix.com
> 
> Changes in v5:
> - Added patch "hw/pci: Always call pcie_sriov_pf_reset()".
> - Added patch "pcie_sriov: Reset SR-IOV extended capability".
> - Removed a reference to PCI_SRIOV_CTRL_VFE in hw/nvme.
>    (Michael S. Tsirkin)
> - Noted the impact on the guest of patch "pcie_sriov: Do not reset
>    NumVFs after unregistering VFs". (Michael S. Tsirkin)
> - Changed to use pcie_sriov_num_vfs().
> - Restored pci_set_power() and changed it to call pci_set_enabled() only
>    for PFs with an expalanation. (Michael S. Tsirkin)
> - Reordered patches.
> - Link to v4: https://lore.kernel.org/r/20240214-reuse-v4-0-89ad093a07f4@daynix.com
> 
> Changes in v4:
> - Reverted the change to pci_rom_bar_explicitly_enabled().
>    (Michael S. Tsirkin)
> - Added patch "pcie_sriov: Do not reset NumVFs after unregistering VFs".
> - Added patch "hw/nvme: Refer to dev->exp.sriov_pf.num_vfs".
> - Link to v3: https://lore.kernel.org/r/20240212-reuse-v3-0-8017b689ce7f@daynix.com
> 
> Changes in v3:
> - Extracted patch "hw/pci: Use -1 as a default value for rombar" from
>    patch "hw/pci: Determine if rombar is explicitly enabled"
>    (Philippe Mathieu-Daudé)
> - Added an audit result of PCIDevice::rom_bar to the message of patch
>    "hw/pci: Use -1 as a default value for rombar"
>    (Philippe Mathieu-Daudé)
> - Link to v2: https://lore.kernel.org/r/20240210-reuse-v2-0-24ba2a502692@daynix.com
> 
> Changes in v2:
> - Reset after enabling a function so that NVMe VF state gets updated.
> - Link to v1: https://lore.kernel.org/r/20240203-reuse-v1-0-5be8c5ce6338@daynix.com
> 
> ---
> Akihiko Odaki (11):
>        hw/ppc/spapr_pci: Do not create DT for disabled PCI device
>        hw/ppc/spapr_pci: Do not reject VFs created after a PF
>        s390x/pci: Avoid creating zpci for VFs
>        s390x/pci: Allow plugging SR-IOV devices
>        s390x/pci: Check for multifunction after device realization
>        pcie_sriov: Do not manually unrealize
>        pcie_sriov: Ensure VF addr does not overflow
>        pcie_sriov: Reuse SR-IOV VF device instances
>        pcie_sriov: Release VFs failed to realize
>        pcie_sriov: Remove num_vfs from PCIESriovPF
>        pcie_sriov: Register VFs after migration
> 
>   docs/pcie_sriov.txt         |   8 ++-
>   include/hw/pci/pcie_sriov.h |   9 +--
>   hw/net/igb.c                |  10 ++-
>   hw/nvme/ctrl.c              |  22 +++---
>   hw/pci/pci.c                |  21 +++++-
>   hw/pci/pcie_sriov.c         | 159 ++++++++++++++++++++++++--------------------
>   hw/ppc/spapr_pci.c          |  20 +++++-
>   hw/s390x/s390-pci-bus.c     |  42 +++++++++---
>   hw/pci/trace-events         |   2 +-
>   9 files changed, 187 insertions(+), 106 deletions(-)
> ---
> base-commit: 7433709a147706ad7d1956b15669279933d0f82b
> change-id: 20240129-reuse-faae22b11934
> 
> Best regards,