Re: [PATCH 3/5] hw/ppc/pegasos2: Fix PCI interrupt routing

["Philippe Mathieu-Daudé" <philmd@linaro.org>]

On 21/2/23 19:44, BALATON Zoltan wrote:
> According to the PegasosII schematics the PCI interrupt lines are
> connected to both the gpp pins of the Mv64361 north bridge and the
> PINT pins of the VT8231 south bridge so guests can get interrupts from
> either of these. So far we only had the MV64361 connections which
> worked for on board devices but for additional PCI devices (such as
> network or sound card added with -device) guest OSes expect interrupt
> from the ISA IRQ 9 where the firmware routes these PCI interrupts in
> VT8231 ISA bridge. After the previous patches we can now model this
> and also remove the board specific connection from mv64361. Also
> configure routing of these lines when using Virtual Open Firmware to
> match board firmware for guests that expect this.
> 
> This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
> 
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
> ---
>   hw/pci-host/mv64361.c |  4 ----
>   hw/ppc/pegasos2.c     | 26 +++++++++++++++++++++++++-
>   2 files changed, 25 insertions(+), 5 deletions(-)


> +static void pegasos2_pci_irq(void *opaque, int n, int level)
> +{
> +    Pegasos2MachineState *pm = opaque;
> +
> +    /* PCI interrupt lines are connected to both MV64361 and VT8231 */
> +    qemu_set_irq(pm->mv_pirq[n], level);
> +    qemu_set_irq(pm->via_pirq[n], level);
> +}

See TYPE_SPLIT_IRQ.