qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Edmondson <david.edmondson@oracle.com>
To: "Philippe Mathieu-Daudé" <philmd@redhat.com>, qemu-devel@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>,
	"Stephen Checkoway" <stephen.checkoway@oberlin.edu>,
	qemu-block@nongnu.org, "Max Reitz" <mreitz@redhat.com>,
	"Alistair Francis" <alistair.francis@wdc.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: Re: [PATCH 3/9] hw/block/pflash_cfi02: Extract pflash_cfi02_fill_cfi_table()
Date: Wed, 10 Mar 2021 10:53:06 +0000	[thread overview]
Message-ID: <m2v99zfffx.fsf@oracle.com> (raw)
In-Reply-To: <20210309235028.912078-4-philmd@redhat.com>

On Wednesday, 2021-03-10 at 00:50:22 +01, Philippe Mathieu-Daudé wrote:

> Fill the CFI table in out of DeviceRealize() in a new function:
> pflash_cfi02_fill_cfi_table().
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Reviewed-by: David Edmondson <david.edmondson@oracle.com>

> ---
>  hw/block/pflash_cfi02.c | 193 +++++++++++++++++++++-------------------
>  1 file changed, 99 insertions(+), 94 deletions(-)
>
> diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c
> index fa981465e12..845f50ed99b 100644
> --- a/hw/block/pflash_cfi02.c
> +++ b/hw/block/pflash_cfi02.c
> @@ -724,6 +724,104 @@ static const MemoryRegionOps pflash_cfi02_ops = {
>      .endianness = DEVICE_NATIVE_ENDIAN,
>  };
>  
> +static void pflash_cfi02_fill_cfi_table(PFlashCFI02 *pfl, int nb_regions)
> +{
> +    /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
> +    const uint16_t pri_ofs = 0x40;
> +    /* Standard "QRY" string */
> +    pfl->cfi_table[0x10] = 'Q';
> +    pfl->cfi_table[0x11] = 'R';
> +    pfl->cfi_table[0x12] = 'Y';
> +    /* Command set (AMD/Fujitsu) */
> +    pfl->cfi_table[0x13] = 0x02;
> +    pfl->cfi_table[0x14] = 0x00;
> +    /* Primary extended table address */
> +    pfl->cfi_table[0x15] = pri_ofs;
> +    pfl->cfi_table[0x16] = pri_ofs >> 8;
> +    /* Alternate command set (none) */
> +    pfl->cfi_table[0x17] = 0x00;
> +    pfl->cfi_table[0x18] = 0x00;
> +    /* Alternate extended table (none) */
> +    pfl->cfi_table[0x19] = 0x00;
> +    pfl->cfi_table[0x1A] = 0x00;
> +    /* Vcc min */
> +    pfl->cfi_table[0x1B] = 0x27;
> +    /* Vcc max */
> +    pfl->cfi_table[0x1C] = 0x36;
> +    /* Vpp min (no Vpp pin) */
> +    pfl->cfi_table[0x1D] = 0x00;
> +    /* Vpp max (no Vpp pin) */
> +    pfl->cfi_table[0x1E] = 0x00;
> +    /* Timeout per single byte/word write (128 ms) */
> +    pfl->cfi_table[0x1F] = 0x07;
> +    /* Timeout for min size buffer write (NA) */
> +    pfl->cfi_table[0x20] = 0x00;
> +    /* Typical timeout for block erase (512 ms) */
> +    pfl->cfi_table[0x21] = 0x09;
> +    /* Typical timeout for full chip erase (4096 ms) */
> +    pfl->cfi_table[0x22] = 0x0C;
> +    /* Reserved */
> +    pfl->cfi_table[0x23] = 0x01;
> +    /* Max timeout for buffer write (NA) */
> +    pfl->cfi_table[0x24] = 0x00;
> +    /* Max timeout for block erase */
> +    pfl->cfi_table[0x25] = 0x0A;
> +    /* Max timeout for chip erase */
> +    pfl->cfi_table[0x26] = 0x0D;
> +    /* Device size */
> +    pfl->cfi_table[0x27] = ctz32(pfl->chip_len);
> +    /* Flash device interface (8 & 16 bits) */
> +    pfl->cfi_table[0x28] = 0x02;
> +    pfl->cfi_table[0x29] = 0x00;
> +    /* Max number of bytes in multi-bytes write */
> +    /*
> +     * XXX: disable buffered write as it's not supported
> +     * pfl->cfi_table[0x2A] = 0x05;
> +     */
> +    pfl->cfi_table[0x2A] = 0x00;
> +    pfl->cfi_table[0x2B] = 0x00;
> +    /* Number of erase block regions */
> +    pfl->cfi_table[0x2c] = nb_regions;
> +    /* Erase block regions */
> +    for (int i = 0; i < nb_regions; ++i) {
> +        uint32_t sector_len_per_device = pfl->sector_len[i];
> +        pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1;
> +        pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8;
> +        pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8;
> +        pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16;
> +    }
> +    assert(0x2c + 4 * nb_regions < pri_ofs);
> +
> +    /* Extended */
> +    pfl->cfi_table[0x00 + pri_ofs] = 'P';
> +    pfl->cfi_table[0x01 + pri_ofs] = 'R';
> +    pfl->cfi_table[0x02 + pri_ofs] = 'I';
> +
> +    /* Extended version 1.0 */
> +    pfl->cfi_table[0x03 + pri_ofs] = '1';
> +    pfl->cfi_table[0x04 + pri_ofs] = '0';
> +
> +    /* Address sensitive unlock required. */
> +    pfl->cfi_table[0x05 + pri_ofs] = 0x00;
> +    /* Erase suspend to read/write. */
> +    pfl->cfi_table[0x06 + pri_ofs] = 0x02;
> +    /* Sector protect not supported. */
> +    pfl->cfi_table[0x07 + pri_ofs] = 0x00;
> +    /* Temporary sector unprotect not supported. */
> +    pfl->cfi_table[0x08 + pri_ofs] = 0x00;
> +
> +    /* Sector protect/unprotect scheme. */
> +    pfl->cfi_table[0x09 + pri_ofs] = 0x00;
> +
> +    /* Simultaneous operation not supported. */
> +    pfl->cfi_table[0x0a + pri_ofs] = 0x00;
> +    /* Burst mode not supported. */
> +    pfl->cfi_table[0x0b + pri_ofs] = 0x00;
> +    /* Page mode not supported. */
> +    pfl->cfi_table[0x0c + pri_ofs] = 0x00;
> +    assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table));
> +}
> +
>  static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
>  {
>      ERRP_GUARD();
> @@ -837,100 +935,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
>      pfl->cmd = 0;
>      pfl->status = 0;
>  
> -    /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
> -    const uint16_t pri_ofs = 0x40;
> -    /* Standard "QRY" string */
> -    pfl->cfi_table[0x10] = 'Q';
> -    pfl->cfi_table[0x11] = 'R';
> -    pfl->cfi_table[0x12] = 'Y';
> -    /* Command set (AMD/Fujitsu) */
> -    pfl->cfi_table[0x13] = 0x02;
> -    pfl->cfi_table[0x14] = 0x00;
> -    /* Primary extended table address */
> -    pfl->cfi_table[0x15] = pri_ofs;
> -    pfl->cfi_table[0x16] = pri_ofs >> 8;
> -    /* Alternate command set (none) */
> -    pfl->cfi_table[0x17] = 0x00;
> -    pfl->cfi_table[0x18] = 0x00;
> -    /* Alternate extended table (none) */
> -    pfl->cfi_table[0x19] = 0x00;
> -    pfl->cfi_table[0x1A] = 0x00;
> -    /* Vcc min */
> -    pfl->cfi_table[0x1B] = 0x27;
> -    /* Vcc max */
> -    pfl->cfi_table[0x1C] = 0x36;
> -    /* Vpp min (no Vpp pin) */
> -    pfl->cfi_table[0x1D] = 0x00;
> -    /* Vpp max (no Vpp pin) */
> -    pfl->cfi_table[0x1E] = 0x00;
> -    /* Timeout per single byte/word write (128 ms) */
> -    pfl->cfi_table[0x1F] = 0x07;
> -    /* Timeout for min size buffer write (NA) */
> -    pfl->cfi_table[0x20] = 0x00;
> -    /* Typical timeout for block erase (512 ms) */
> -    pfl->cfi_table[0x21] = 0x09;
> -    /* Typical timeout for full chip erase (4096 ms) */
> -    pfl->cfi_table[0x22] = 0x0C;
> -    /* Reserved */
> -    pfl->cfi_table[0x23] = 0x01;
> -    /* Max timeout for buffer write (NA) */
> -    pfl->cfi_table[0x24] = 0x00;
> -    /* Max timeout for block erase */
> -    pfl->cfi_table[0x25] = 0x0A;
> -    /* Max timeout for chip erase */
> -    pfl->cfi_table[0x26] = 0x0D;
> -    /* Device size */
> -    pfl->cfi_table[0x27] = ctz32(pfl->chip_len);
> -    /* Flash device interface (8 & 16 bits) */
> -    pfl->cfi_table[0x28] = 0x02;
> -    pfl->cfi_table[0x29] = 0x00;
> -    /* Max number of bytes in multi-bytes write */
> -    /*
> -     * XXX: disable buffered write as it's not supported
> -     * pfl->cfi_table[0x2A] = 0x05;
> -     */
> -    pfl->cfi_table[0x2A] = 0x00;
> -    pfl->cfi_table[0x2B] = 0x00;
> -    /* Number of erase block regions */
> -    pfl->cfi_table[0x2c] = nb_regions;
> -    /* Erase block regions */
> -    for (int i = 0; i < nb_regions; ++i) {
> -        uint32_t sector_len_per_device = pfl->sector_len[i];
> -        pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1;
> -        pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8;
> -        pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8;
> -        pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16;
> -    }
> -    assert(0x2c + 4 * nb_regions < pri_ofs);
> -
> -    /* Extended */
> -    pfl->cfi_table[0x00 + pri_ofs] = 'P';
> -    pfl->cfi_table[0x01 + pri_ofs] = 'R';
> -    pfl->cfi_table[0x02 + pri_ofs] = 'I';
> -
> -    /* Extended version 1.0 */
> -    pfl->cfi_table[0x03 + pri_ofs] = '1';
> -    pfl->cfi_table[0x04 + pri_ofs] = '0';
> -
> -    /* Address sensitive unlock required. */
> -    pfl->cfi_table[0x05 + pri_ofs] = 0x00;
> -    /* Erase suspend to read/write. */
> -    pfl->cfi_table[0x06 + pri_ofs] = 0x02;
> -    /* Sector protect not supported. */
> -    pfl->cfi_table[0x07 + pri_ofs] = 0x00;
> -    /* Temporary sector unprotect not supported. */
> -    pfl->cfi_table[0x08 + pri_ofs] = 0x00;
> -
> -    /* Sector protect/unprotect scheme. */
> -    pfl->cfi_table[0x09 + pri_ofs] = 0x00;
> -
> -    /* Simultaneous operation not supported. */
> -    pfl->cfi_table[0x0a + pri_ofs] = 0x00;
> -    /* Burst mode not supported. */
> -    pfl->cfi_table[0x0b + pri_ofs] = 0x00;
> -    /* Page mode not supported. */
> -    pfl->cfi_table[0x0c + pri_ofs] = 0x00;
> -    assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table));
> +    pflash_cfi02_fill_cfi_table(pfl, nb_regions);
>  }
>  
>  static Property pflash_cfi02_properties[] = {
> -- 
> 2.26.2

dme.
-- 
You took the words right out of my mouth.


  parent reply	other threads:[~2021-03-10 10:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-09 23:50 [PATCH 0/9] hw/block/pflash: Refactors around setting the device in read-array mode Philippe Mathieu-Daudé
2021-03-09 23:50 ` [PATCH 1/9] hw/block/pflash_cfi: Fix code style for checkpatch.pl Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10  9:30   ` David Edmondson
2021-03-09 23:50 ` [PATCH 2/9] hw/block/pflash_cfi01: Extract pflash_cfi01_fill_cfi_table() Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10  9:31   ` David Edmondson
2021-03-09 23:50 ` [PATCH 3/9] hw/block/pflash_cfi02: Extract pflash_cfi02_fill_cfi_table() Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10 10:53   ` David Edmondson [this message]
2021-03-09 23:50 ` [PATCH 4/9] hw/block/pflash_cfi02: Set rom_mode to true in pflash_setup_mappings() Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10 10:58   ` David Edmondson
2021-03-10 16:34     ` Philippe Mathieu-Daudé
2021-03-09 23:50 ` [PATCH 5/9] hw/block/pflash_cfi02: Open-code pflash_register_memory(rom=false) Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-09 23:50 ` [PATCH 6/9] hw/block/pflash_cfi02: Rename register_memory(true) as mode_read_array Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10 10:59   ` David Edmondson
2021-03-10 16:31     ` Philippe Mathieu-Daudé
2021-03-10 16:34       ` Philippe Mathieu-Daudé
2021-03-09 23:50 ` [PATCH 7/9] hw/block/pflash_cfi02: Factor out DeviceReset method Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10 16:44     ` Philippe Mathieu-Daudé
2021-03-10 11:01   ` David Edmondson
2021-03-09 23:50 ` [PATCH 8/9] hw/block/pflash_cfi01: Clarify trace events Philippe Mathieu-Daudé
2021-03-10  8:48   ` Bin Meng
2021-03-10 11:01   ` David Edmondson
2021-03-09 23:50 ` [PATCH 9/9] hw/block/pflash_cfi01: Extract pflash_mode_read_array() Philippe Mathieu-Daudé
2021-03-10 11:05   ` David Edmondson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2v99zfffx.fsf@oracle.com \
    --to=david.edmondson@oracle.com \
    --cc=alistair.francis@wdc.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stephen.checkoway@oberlin.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).