From: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Manos Pitsidianakis" <manos.pitsidianakis@linaro.org>,
"Igor Skalkin" <Igor.Skalkin@opensynergy.com>,
"Anton Yakovlev" <Anton.Yakovlev@opensynergy.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Gerd Hoffmann" <kraxel@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Daniel P. Berrangé " <berrange@redhat.com>,
"Eduardo Habkost" <eduardo@habkost.net>
Subject: Re: [PATCH v2 0/3] Add VIRTIO sound card
Date: Thu, 13 Jul 2023 14:00:40 +0300 [thread overview]
Message-ID: <xqes1.ursoa6rc1qb6@linaro.org> (raw)
In-Reply-To: <cover.1686238728.git.manos.pitsidianakis@linaro.org>
Ping
Patch series on patchew:
https://patchew.org/QEMU/cover.1686238728.git.manos.pitsidianakis@linaro.org/
Patch series on lore:
https://lore.kernel.org/qemu-devel/cover.1686238728.git.manos.pitsidianakis@linaro.org/
On Thu, 08 Jun 2023 18:56, Manos Pitsidianakis <manos.pitsidianakis@linaro.org> wrote:
>This patch series adds an audio device implementing the recent virtio
>sound spec (1.2) and a corresponding PCI wrapper device.
>
>Main differences with v1 patch
><20230526204845.673031-1-manos.pitsidianakis@linaro.org>:
>
>- Split virtio-snd and virtio-snd-pci devices to two commits
>- Added audio capture support
>
>Known problems (On pipewire at least):
>
>- Stereo recording results in one channel with the recording + a ticking
> kind of artifact and one channel that has no artifacts, just the
> recording.
>
>Manos Pitsidianakis (3):
> Add virtio-sound device
> Add virtio-sound-pci device
> Implement audio capture in virtio-snd device
>
> MAINTAINERS | 6 +
> hw/virtio/Kconfig | 5 +
> hw/virtio/meson.build | 2 +
> hw/virtio/trace-events | 22 +
> hw/virtio/virtio-snd-pci.c | 102 +++
> hw/virtio/virtio-snd.c | 1290 ++++++++++++++++++++++++++++++++
> include/hw/pci/pci.h | 1 +
> include/hw/virtio/virtio-snd.h | 194 +++++
> softmmu/qdev-monitor.c | 1 +
> 9 files changed, 1623 insertions(+)
> create mode 100644 hw/virtio/virtio-snd-pci.c
> create mode 100644 hw/virtio/virtio-snd.c
> create mode 100644 include/hw/virtio/virtio-snd.h
>
>Range-diff against v1:
>1: 652c7d2d01 ! 1: 95d564fc1f Add virtio-sound and virtio-sound-pci devices
> @@ Metadata
> Author: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
>
> ## Commit message ##
> - Add virtio-sound and virtio-sound-pci devices
> + Add virtio-sound device
>
> This patch adds an audio device implementing the recent virtio sound
> - spec (1.2) and a corresponding PCI wrapper device.
> + spec (1.2).
>
> PCM functionality is implemented, and jack[0], chmaps[1] messages are
> - at the moment ignored.
> -
> - To test this, you'll need a >6.0 kernel compiled with the virtio-snd
> - flag enabled, which distros have off by default.
> -
> - Use with following flags in the invocation:
> -
> - -device virtio-sound-pci,disable-legacy=on
> -
> - And an audio backend listed with `-audio driver=help` that works on
> - your host machine, e.g.:
> -
> - Pulseaudio:
> - -audio driver=pa,model=virtio-sound,server=/run/user/1000/pulse/native
> - sdl:
> - -audio driver=sdl,model=virtio-sound
> - coreaudio:
> - -audio driver=coreaudio,model=virtio-sound
> - etc.
> -
> - You can use speaker-test from alsa-tools to play noise, sines, or
> - WAV files.
> + at the moment left unimplemented.
>
> PS2: This patch was based on a draft patch posted by OpenSynergy in 2019. [2]
>
> @@ Commit message
> Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
> Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
>
> + ## MAINTAINERS ##
> +@@ MAINTAINERS: F: hw/virtio/virtio-mem-pci.h
> + F: hw/virtio/virtio-mem-pci.c
> + F: include/hw/virtio/virtio-mem.h
> +
> ++virtio-snd
> ++M: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
> ++S: Supported
> ++F: hw/virtio/virtio-snd*.c
> ++F: include/hw/virtio/virtio-snd.h
> ++
> + nvme
> + M: Keith Busch <kbusch@kernel.org>
> + M: Klaus Jensen <its@irrelevant.dk>
> +
> ## hw/virtio/Kconfig ##
> @@ hw/virtio/Kconfig: config VIRTIO_PCI
> depends on PCI
> @@ hw/virtio/Kconfig: config VIRTIO_PCI
> select VIRTIO
>
> ## hw/virtio/meson.build ##
> -@@ hw/virtio/meson.build: virtio_pci_ss.add(when: 'CONFIG_VIRTIO_SERIAL', if_true: files('virtio-serial-pc
> - virtio_pci_ss.add(when: 'CONFIG_VIRTIO_PMEM', if_true: files('virtio-pmem-pci.c'))
> - virtio_pci_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu-pci.c'))
> - virtio_pci_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem-pci.c'))
> -+virtio_pci_ss.add(when: 'CONFIG_VIRTIO_SND', if_true: files('virtio-snd-pci.c'))
> - virtio_pci_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev-pci.c'))
> -
> - specific_virtio_ss.add_all(when: 'CONFIG_VIRTIO_PCI', if_true: virtio_pci_ss)
> @@ hw/virtio/meson.build: softmmu_ss.add(when: 'CONFIG_VIRTIO', if_false: files('virtio-stub.c'))
> softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('vhost-stub.c'))
> softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('virtio-stub.c'))
> @@ hw/virtio/trace-events: virtio_pmem_flush_done(int type) "fsync return=%d"
> +virtio_snd_handle_pcm_info(int stream) "VIRTIO_SND_R_PCM_INFO called for stream %d"
> +virtio_snd_handle_pcm_set_params(int stream) "VIRTIO_SND_PCM_SET_PARAMS called for stream %d"
> +virtio_snd_handle_pcm_start_stop(const char *code, int stream) "%s called for stream %d"
> -+virtio_snd_handle_pcm_release(int stream) "VIRTIO_SND_PCM_RELEASE called for stream %id"
> ++virtio_snd_handle_pcm_release(int stream) "VIRTIO_SND_PCM_RELEASE called for stream %d"
> +virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
> +virtio_snd_handle_xfer(void) "tx/rx queue callback called"
> -+virtio_snd_handle_xfer_elem(const char * k) "xfer handled in virtio_snd_pcm_%s"
> +virtio_snd_handle_event(void) "event queue callback called"
> -+virtio_snd_cpu_is_stopped(void *snd, int size) "snd %p: cpu is stopped, dropping %d bytes"
> +virtio_snd_realize(void *snd) "snd %p: realize"
> -+virtio_snd_unrealize(void *snd) "snd %p: realize"
> ++virtio_snd_unrealize(void *snd) "snd %p: unrealize"
> +virtio_snd_get_features(void *vdev, uint64_t features) "snd %p: get_features 0x%"PRIx64
> +virtio_snd_get_config(void *vdev, uint32_t jacks, uint32_t streams, uint32_t chmaps) "snd %p: get_config jacks=%d streams=%d chmaps=%d"
> +virtio_snd_set_config(void *vdev, uint32_t jacks, uint32_t new_jacks, uint32_t streams, uint32_t new_streams, uint32_t chmaps, uint32_t new_chmaps) "snd %p: set_config jacks from %d->%d, streams from %d->%d, chmaps from %d->%d"
> @@ hw/virtio/trace-events: virtio_pmem_flush_done(int type) "fsync return=%d"
> +virtio_snd_vm_state_stopped(void) "vm state stopped"
> +virtio_snd_handle_code(int val, const char *code) "ctrl code msg val = %d == %s"
>
> - ## hw/virtio/virtio-snd-pci.c (new) ##
> -@@
> -+/*
> -+ * VIRTIO Sound Device PCI Bindings
> -+ *
> -+ * Copyright (c) 2023 Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
> -+ *
> -+ * This work is licensed under the terms of the GNU GPL, version 2 or
> -+ * (at your option) any later version. See the COPYING file in the
> -+ * top-level directory.
> -+ */
> -+
> -+#include "qemu/osdep.h"
> -+#include "hw/audio/soundhw.h"
> -+#include "hw/virtio/virtio-pci.h"
> -+#include "hw/virtio/virtio-snd.h"
> -+
> -+typedef struct VirtIOSoundPCI VirtIOSoundPCI;
> -+
> -+/*
> -+ * virtio-snd-pci: This extends VirtioPCIProxy.
> -+ */
> -+#define TYPE_VIRTIO_SND_PCI "virtio-sound-pci-base"
> -+DECLARE_INSTANCE_CHECKER(VirtIOSoundPCI, VIRTIO_SOUND_PCI,
> -+ TYPE_VIRTIO_SND_PCI)
> -+
> -+struct VirtIOSoundPCI {
> -+ VirtIOPCIProxy parent;
> -+ VirtIOSound vdev;
> -+};
> -+
> -+static Property virtio_snd_pci_properties[] = {
> -+ DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0),
> -+ DEFINE_PROP_END_OF_LIST(),
> -+};
> -+
> -+static const char *audiodev_id;
> -+
> -+static int virtio_snd_init_pci(PCIBus *init_bus, const char *audiodev)
> -+{
> -+ audiodev_id = audiodev;
> -+ return 0;
> -+}
> -+
> -+static void virtio_snd_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
> -+{
> -+ VirtIOSoundPCI *dev = VIRTIO_SOUND_PCI(vpci_dev);
> -+ DeviceState *vdev = DEVICE(&dev->vdev);
> -+ VirtIOSound *vsnd = VIRTIO_SND(&dev->vdev);
> -+
> -+ /*
> -+ * According to spec, non-legacy virtio PCI devices are always little
> -+ * endian
> -+ */
> -+ vsnd->virtio_access_is_big_endian = false;
> -+
> -+
> -+ qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus), errp);
> -+
> -+
> -+ qdev_prop_set_string(vdev, "audiodev", audiodev_id);
> -+ AUD_register_card ("virtio-sound", &dev->vdev.card);
> -+
> -+ object_property_set_bool(OBJECT(vdev), "realized", true, errp);
> -+}
> -+
> -+static void virtio_snd_pci_class_init(ObjectClass *klass, void *data)
> -+{
> -+ DeviceClass *dc = DEVICE_CLASS(klass);
> -+ VirtioPCIClass *vpciklass = VIRTIO_PCI_CLASS(klass);
> -+ PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
> -+
> -+ vpciklass->realize = virtio_snd_pci_realize;
> -+ set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
> -+
> -+ pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
> -+ pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_SND;
> -+ pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
> -+ pcidev_k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
> -+ device_class_set_props(dc, virtio_snd_pci_properties);
> -+}
> -+
> -+static void virtio_snd_pci_instance_init(Object *obj)
> -+{
> -+ VirtIOSoundPCI *dev = VIRTIO_SOUND_PCI(obj);
> -+
> -+ virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
> -+ TYPE_VIRTIO_SND);
> -+}
> -+
> -+static const VirtioPCIDeviceTypeInfo virtio_snd_pci_info = {
> -+ .base_name = TYPE_VIRTIO_SND_PCI,
> -+ .generic_name = "virtio-sound-pci",
> -+ .instance_size = sizeof(VirtIOSoundPCI),
> -+ .instance_init = virtio_snd_pci_instance_init,
> -+ .class_init = virtio_snd_pci_class_init,
> -+};
> -+
> -+static void virtio_snd_pci_register(void)
> -+{
> -+ virtio_pci_types_register(&virtio_snd_pci_info);
> -+ pci_register_soundhw("virtio-sound", "Virtio Sound Device",
> -+ virtio_snd_init_pci);
> -+}
> -+
> -+type_init(virtio_snd_pci_register);
> -
> ## hw/virtio/virtio-snd.c (new) ##
> @@
> +/*
> @@ hw/virtio/virtio-snd.c (new)
> +#define VIRTIO_SOUND_STREAM_DEFAULT 1
> +#define VIRTIO_SOUND_CHMAP_DEFAULT 0
> +
> -+#define VIRTIO_SOUND_HDA_FN_NID_OUT 0
> -+#define VIRTIO_SOUND_HDA_FN_NID_IN 1
> ++#define VIRTIO_SOUND_HDA_FN_NID 0
> +
> +static const VMStateDescription vmstate_virtio_snd_device = {
> + .name = TYPE_VIRTIO_SND,
> @@ hw/virtio/virtio-snd.c (new)
> +uint32_t virtio_snd_pcm_set_params_impl(VirtIOSound *s,
> + virtio_snd_pcm_set_params *params)
> +{
> ++ uint32_t supported_formats, supported_rates;
> ++ VirtIOSoundPCMParams *st_params;
> + uint32_t stream_id = params->hdr.stream_id;
> ++
> + if (stream_id > s->snd_conf.streams || !(s->pcm->pcm_params)) {
> + virtio_error(VIRTIO_DEVICE(s), "Streams have not been initialized.\n");
> + return VIRTIO_SND_S_BAD_MSG;
> @@ hw/virtio/virtio-snd.c (new)
> + if (!s->pcm->pcm_params[stream_id]) {
> + s->pcm->pcm_params[stream_id] = g_new0(VirtIOSoundPCMParams, 1);
> + }
> -+ VirtIOSoundPCMParams *st_params = virtio_snd_pcm_get_params(s, stream_id);
> ++ st_params = virtio_snd_pcm_get_params(s, stream_id);
> +
> + st_params->features = params->features;
> + st_params->buffer_bytes = params->buffer_bytes;
> @@ hw/virtio/virtio-snd.c (new)
> + }
> + st_params->channels = params->channels;
> +
> -+ uint32_t supported_formats = 1 << VIRTIO_SND_PCM_FMT_S8
> -+ | 1 << VIRTIO_SND_PCM_FMT_U8
> -+ | 1 << VIRTIO_SND_PCM_FMT_S16
> -+ | 1 << VIRTIO_SND_PCM_FMT_U16
> -+ | 1 << VIRTIO_SND_PCM_FMT_S32
> -+ | 1 << VIRTIO_SND_PCM_FMT_U32
> -+ | 1 << VIRTIO_SND_PCM_FMT_FLOAT;
> -+
> -+ uint32_t supported_rates = 1 << VIRTIO_SND_PCM_RATE_5512
> -+ | 1 << VIRTIO_SND_PCM_RATE_8000
> -+ | 1 << VIRTIO_SND_PCM_RATE_11025
> -+ | 1 << VIRTIO_SND_PCM_RATE_16000
> -+ | 1 << VIRTIO_SND_PCM_RATE_22050
> -+ | 1 << VIRTIO_SND_PCM_RATE_32000
> -+ | 1 << VIRTIO_SND_PCM_RATE_44100
> -+ | 1 << VIRTIO_SND_PCM_RATE_48000
> -+ | 1 << VIRTIO_SND_PCM_RATE_64000
> -+ | 1 << VIRTIO_SND_PCM_RATE_88200
> -+ | 1 << VIRTIO_SND_PCM_RATE_96000
> -+ | 1 << VIRTIO_SND_PCM_RATE_176400
> -+ | 1 << VIRTIO_SND_PCM_RATE_192000
> -+ | 1 << VIRTIO_SND_PCM_RATE_384000;
> ++ supported_formats = 1 << VIRTIO_SND_PCM_FMT_S8
> ++ | 1 << VIRTIO_SND_PCM_FMT_U8
> ++ | 1 << VIRTIO_SND_PCM_FMT_S16
> ++ | 1 << VIRTIO_SND_PCM_FMT_U16
> ++ | 1 << VIRTIO_SND_PCM_FMT_S32
> ++ | 1 << VIRTIO_SND_PCM_FMT_U32
> ++ | 1 << VIRTIO_SND_PCM_FMT_FLOAT;
> ++
> ++ supported_rates = 1 << VIRTIO_SND_PCM_RATE_5512
> ++ | 1 << VIRTIO_SND_PCM_RATE_8000
> ++ | 1 << VIRTIO_SND_PCM_RATE_11025
> ++ | 1 << VIRTIO_SND_PCM_RATE_16000
> ++ | 1 << VIRTIO_SND_PCM_RATE_22050
> ++ | 1 << VIRTIO_SND_PCM_RATE_32000
> ++ | 1 << VIRTIO_SND_PCM_RATE_44100
> ++ | 1 << VIRTIO_SND_PCM_RATE_48000
> ++ | 1 << VIRTIO_SND_PCM_RATE_64000
> ++ | 1 << VIRTIO_SND_PCM_RATE_88200
> ++ | 1 << VIRTIO_SND_PCM_RATE_96000
> ++ | 1 << VIRTIO_SND_PCM_RATE_176400
> ++ | 1 << VIRTIO_SND_PCM_RATE_192000
> ++ | 1 << VIRTIO_SND_PCM_RATE_384000;
> +
> + if (!(supported_formats & (1 << params->format))) {
> + error_report("Stream format is not supported.");
> @@ hw/virtio/virtio-snd.c (new)
> + st_params->rate = params->rate;
> + st_params->period_bytes = params->period_bytes;
> + st_params->buffer_bytes = params->buffer_bytes;
> ++
> + return VIRTIO_SND_S_OK;
> +}
> +
> @@ hw/virtio/virtio-snd.c (new)
> +{
> + virtio_snd_pcm_set_params req;
> + uint32_t sz;
> ++
> + sz = iov_to_buf(cmd->elem->out_sg,
> + cmd->elem->out_num,
> + 0,
> @@ hw/virtio/virtio-snd.c (new)
> +
> + trace_virtio_snd_handle_pcm_set_params(req.hdr.stream_id);
> + cmd->resp.code = virtio_snd_pcm_set_params_impl(s, &req);
> ++
> + return;
> +}
> +
> @@ hw/virtio/virtio-snd.c (new)
> +static void virtio_snd_get_qemu_audsettings(audsettings *as,
> + VirtIOSoundPCMParams *params)
> +{
> -+ as->nchannels = params->channels;
> ++ as->nchannels = MIN(AUDIO_MAX_CHANNELS, params->channels);
> + as->fmt = virtio_snd_get_qemu_format(params->format);
> + as->freq = virtio_snd_get_qemu_freq(params->rate);
> + as->endianness = AUDIO_HOST_ENDIANNESS;
> @@ hw/virtio/virtio-snd.c (new)
> + */
> +static uint32_t virtio_snd_pcm_prepare_impl(VirtIOSound *s, uint32_t stream_id)
> +{
> ++ audsettings as;
> ++ uint32_t supported_formats, supported_rates;
> ++ VirtIOSoundPCMParams *params;
> ++ VirtIOSoundPCMStream *stream;
> ++
> + if (!s->pcm->streams
> + || !s->pcm->pcm_params
> + || !s->pcm->pcm_params[stream_id]) {
> + return VIRTIO_SND_S_BAD_MSG;
> + }
> +
> -+ uint32_t supported_formats = 1 << VIRTIO_SND_PCM_FMT_S8
> -+ | 1 << VIRTIO_SND_PCM_FMT_U8
> -+ | 1 << VIRTIO_SND_PCM_FMT_S16
> -+ | 1 << VIRTIO_SND_PCM_FMT_U16
> -+ | 1 << VIRTIO_SND_PCM_FMT_S32
> -+ | 1 << VIRTIO_SND_PCM_FMT_U32
> -+ | 1 << VIRTIO_SND_PCM_FMT_FLOAT;
> -+
> -+ uint32_t supported_rates = 1 << VIRTIO_SND_PCM_RATE_5512
> -+ | 1 << VIRTIO_SND_PCM_RATE_8000
> -+ | 1 << VIRTIO_SND_PCM_RATE_11025
> -+ | 1 << VIRTIO_SND_PCM_RATE_16000
> -+ | 1 << VIRTIO_SND_PCM_RATE_22050
> -+ | 1 << VIRTIO_SND_PCM_RATE_32000
> -+ | 1 << VIRTIO_SND_PCM_RATE_44100
> -+ | 1 << VIRTIO_SND_PCM_RATE_48000
> -+ | 1 << VIRTIO_SND_PCM_RATE_64000
> -+ | 1 << VIRTIO_SND_PCM_RATE_88200
> -+ | 1 << VIRTIO_SND_PCM_RATE_96000
> -+ | 1 << VIRTIO_SND_PCM_RATE_176400
> -+ | 1 << VIRTIO_SND_PCM_RATE_192000
> -+ | 1 << VIRTIO_SND_PCM_RATE_384000;
> -+
> -+ VirtIOSoundPCMParams *params = virtio_snd_pcm_get_params(s, stream_id);
> ++ supported_formats = 1 << VIRTIO_SND_PCM_FMT_S8
> ++ | 1 << VIRTIO_SND_PCM_FMT_U8
> ++ | 1 << VIRTIO_SND_PCM_FMT_S16
> ++ | 1 << VIRTIO_SND_PCM_FMT_U16
> ++ | 1 << VIRTIO_SND_PCM_FMT_S32
> ++ | 1 << VIRTIO_SND_PCM_FMT_U32
> ++ | 1 << VIRTIO_SND_PCM_FMT_FLOAT;
> ++
> ++ supported_rates = 1 << VIRTIO_SND_PCM_RATE_5512
> ++ | 1 << VIRTIO_SND_PCM_RATE_8000
> ++ | 1 << VIRTIO_SND_PCM_RATE_11025
> ++ | 1 << VIRTIO_SND_PCM_RATE_16000
> ++ | 1 << VIRTIO_SND_PCM_RATE_22050
> ++ | 1 << VIRTIO_SND_PCM_RATE_32000
> ++ | 1 << VIRTIO_SND_PCM_RATE_44100
> ++ | 1 << VIRTIO_SND_PCM_RATE_48000
> ++ | 1 << VIRTIO_SND_PCM_RATE_64000
> ++ | 1 << VIRTIO_SND_PCM_RATE_88200
> ++ | 1 << VIRTIO_SND_PCM_RATE_96000
> ++ | 1 << VIRTIO_SND_PCM_RATE_176400
> ++ | 1 << VIRTIO_SND_PCM_RATE_192000
> ++ | 1 << VIRTIO_SND_PCM_RATE_384000;
> ++
> ++ params = virtio_snd_pcm_get_params(s, stream_id);
> + assert(params);
> +
> -+ VirtIOSoundPCMStream *stream = g_new0(VirtIOSoundPCMStream, 1);
> ++ virtio_snd_get_qemu_audsettings(&as, params);
> ++
> ++ stream = g_new0(VirtIOSoundPCMStream, 1);
> +
> ++ stream->id = stream_id;
> + stream->pcm = s->pcm;
> + stream->direction = stream_id < s->snd_conf.streams / 2 +
> + (s->snd_conf.streams & 1) ? VIRTIO_SND_D_OUTPUT : VIRTIO_SND_D_INPUT;
> -+ stream->info.hdr.hda_fn_nid = stream->direction == VIRTIO_SND_D_OUTPUT ?
> -+ VIRTIO_SOUND_HDA_FN_NID_OUT : VIRTIO_SOUND_HDA_FN_NID_IN;
> ++ stream->info.hdr.hda_fn_nid = VIRTIO_SOUND_HDA_FN_NID;
> + stream->features = 0;
> + stream->channels_min = 1;
> -+ stream->channels_max = AUDIO_MAX_CHANNELS;
> ++ stream->channels_max = as.nchannels;
> + stream->formats = supported_formats;
> + stream->rates = supported_rates;
> + stream->s = s;
> @@ hw/virtio/virtio-snd.c (new)
> + stream->positions[0] = VIRTIO_SND_CHMAP_FL;
> + stream->positions[1] = VIRTIO_SND_CHMAP_FR;
> +
> -+ audsettings as;
> -+ virtio_snd_get_qemu_audsettings(&as, params);
> +
> + if (stream->direction == VIRTIO_SND_D_OUTPUT) {
> + stream->voice.out = AUD_open_out(&s->card,
> @@ hw/virtio/virtio-snd.c (new)
> + stream->desired_as = stream->as;
> + qemu_mutex_init(&stream->queue_mutex);
> + QSIMPLEQ_INIT(&stream->queue);
> ++
> + s->pcm->streams[stream_id] = stream;
> +
> + return VIRTIO_SND_S_OK;
> @@ hw/virtio/virtio-snd.c (new)
> + virtio_snd_ctrl_command *cmd,
> + bool start)
> +{
> ++ VirtIOSoundPCMStream *stream;
> + virtio_snd_pcm_hdr req;
> + size_t sz;
> +
> @@ hw/virtio/virtio-snd.c (new)
> + trace_virtio_snd_handle_pcm_start_stop(start ? "VIRTIO_SND_R_PCM_START" :
> + "VIRTIO_SND_R_PCM_STOP", req.stream_id);
> +
> -+ VirtIOSoundPCMStream *stream = virtio_snd_pcm_get_stream(s, req.stream_id);
> ++ stream = virtio_snd_pcm_get_stream(s, req.stream_id);
> +
> + if (stream) {
> + if (stream->direction == VIRTIO_SND_D_OUTPUT) {
> @@ hw/virtio/virtio-snd.c (new)
> +}
> +
> +/*
> -+ * Releases the resources allocated to a stream. Seperated from the handler
> -+ * so that the code can be reused in the unrealize function.
> -+ * Returns the response status code. (VIRTIO_SND_S_*).
> ++ * Releases the buffer resources allocated to a stream. Seperated from the
> ++ * handler so that the code can be reused in the unrealize function. Returns
> ++ * the response status code. (VIRTIO_SND_S_*).
> + *
> + * @stream: VirtIOSoundPCMStream stream
> + * @stream_id: stream id
> @@ hw/virtio/virtio-snd.c (new)
> +static uint32_t virtio_snd_pcm_release_impl(VirtIOSoundPCMStream *stream,
> + uint32_t stream_id)
> +{
> ++ assert(stream->s->pcm->streams[stream_id] == stream);
> ++
> + if (virtio_snd_pcm_get_pending_bytes(stream)) {
> + /*
> + * virtio-v1.2-csd01, 5.14.6.6.5.1,
> @@ hw/virtio/virtio-snd.c (new)
> + virtio_snd_pcm_flush(stream);
> + }
> +
> -+ if (stream->direction == VIRTIO_SND_D_OUTPUT) {
> -+ AUD_close_out(&stream->s->card, stream->voice.out);
> -+ } else {
> -+ AUD_close_in(&stream->s->card, stream->voice.in);
> -+ }
> -+
> -+ assert(stream->s->pcm->streams[stream_id] == stream);
> -+
> + return VIRTIO_SND_S_OK;
> +}
> +
> @@ hw/virtio/virtio-snd.c (new)
> +{
> + uint32_t stream_id;
> + size_t sz;
> ++ VirtIOSoundPCMStream *stream;
> +
> + sz = iov_to_buf(cmd->elem->out_sg, cmd->elem->out_num,
> + sizeof(virtio_snd_hdr), &stream_id, sizeof(stream_id));
> @@ hw/virtio/virtio-snd.c (new)
> +
> + trace_virtio_snd_handle_pcm_release(stream_id);
> +
> -+ VirtIOSoundPCMStream *stream = virtio_snd_pcm_get_stream(s, stream_id);
> ++ stream = virtio_snd_pcm_get_stream(s, stream_id);
> + if (!stream) {
> + error_report("already released stream %d", stream_id);
> + virtio_error(VIRTIO_DEVICE(s), "already released stream %d", stream_id);
> @@ hw/virtio/virtio-snd.c (new)
> +
> + switch (cmd->ctrl.code) {
> + case VIRTIO_SND_R_JACK_INFO:
> -+ /*
> -+ * Unimplemented
> -+ * virtio_snd_handle_jack_info(s, cmd);
> -+ */
> -+ break;
> + case VIRTIO_SND_R_JACK_REMAP:
> -+ /*
> -+ * Unimplemented
> -+ * virtio_snd_handle_jack_remap(s, cmd);
> -+ */
> ++ qemu_log_mask(LOG_UNIMP,
> ++ "virtio_snd: jack functionality is unimplemented.");
> + break;
> + case VIRTIO_SND_R_PCM_INFO:
> + virtio_snd_handle_pcm_info(s, cmd);
> @@ hw/virtio/virtio-snd.c (new)
> + virtio_snd_handle_pcm_release(s, cmd);
> + break;
> + case VIRTIO_SND_R_CHMAP_INFO:
> ++ qemu_log_mask(LOG_UNIMP,
> ++ "virtio_snd: chmap info functionality is unimplemented.");
> + trace_virtio_snd_handle_chmap_info();
> + break;
> + default:
> @@ hw/virtio/virtio-snd.c (new)
> + */
> +static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
> +{
> ++ qemu_log_mask(LOG_UNIMP, "virtio_snd: event queue is unimplemented.");
> + trace_virtio_snd_handle_event();
> +}
> +
> @@ hw/virtio/virtio-snd.c (new)
> + VirtQueueElement *elem;
> + size_t sz;
> + virtio_snd_pcm_xfer hdr;
> ++ virtio_snd_pcm_status resp = { 0 };
> +
> + trace_virtio_snd_handle_xfer();
> +
> @@ hw/virtio/virtio-snd.c (new)
> + elem,
> + hdr.stream_id == VIRTIO_SND_D_INPUT);
> +
> -+ virtio_snd_pcm_status resp = { 0 };
> + resp.status = VIRTIO_SND_S_OK;
> + sz = iov_from_buf(elem->in_sg,
> + elem->in_num,
> @@ hw/virtio/virtio-snd.c (new)
> + VirtIOSoundPCMStream *stream = data;
> + VirtIOSoundPCMBlock *block;
> + VirtIOSoundPCMBlock *next;
> ++ int size;
> +
> + WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
> + QSIMPLEQ_FOREACH_SAFE(block, &stream->queue, entry, next) {
> -+ int size = MIN(block->size, available);
> -+
> + for (;;) {
> ++ size = MIN(block->size, available);
> + size = AUD_write(stream->voice.out,
> + block->data + block->offset,
> + size);
> @@ hw/virtio/virtio-snd.c (new)
> + sizeof(block->elem));
> + virtio_notify(VIRTIO_DEVICE(stream->s),
> + block->vq);
> -+ QSIMPLEQ_REMOVE(&stream->queue,
> -+ block,
> -+ VirtIOSoundPCMBlock,
> -+ entry);
> ++ QSIMPLEQ_REMOVE_HEAD(&stream->queue, entry);
> ++ g_free(block);
> + available -= size;
> + break;
> + }
> @@ hw/virtio/virtio-snd.c (new)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VirtIOSound *vsnd = VIRTIO_SND(dev);
> ++ VirtIOSoundPCMStream *stream;
> +
> + qemu_del_vm_change_state_handler(vsnd->vmstate);
> + virtio_del_queue(vdev, 0);
> @@ hw/virtio/virtio-snd.c (new)
> + trace_virtio_snd_unrealize(vsnd);
> +
> + for (int i = VIRTIO_SND_D_OUTPUT; i <= VIRTIO_SND_D_INPUT; i++) {
> -+ VirtIOSoundPCMStream *stream = vsnd->pcm->streams[i];
> -+
> ++ stream = vsnd->pcm->streams[i];
> + virtio_snd_pcm_close(stream);
> -+
> + g_free(stream);
> + }
> +
> @@ hw/virtio/virtio-snd.c (new)
> + sizeof(virtio_snd_pcm_xfer);
> + assert(size <= stream->period_bytes);
> +
> -+ trace_virtio_snd_handle_xfer_elem(read ? "read" : "write");
> -+
> -+ fragment = g_malloc(sizeof(VirtIOSoundPCMBlock) + size);
> ++ fragment = g_malloc0(sizeof(VirtIOSoundPCMBlock) + size);
> + fragment->elem = element;
> + fragment->vq = vq;
> + fragment->size = size;
> @@ hw/virtio/virtio-snd.c (new)
> +
> +type_init(virtio_snd_register);
>
> - ## include/hw/pci/pci.h ##
> -@@ include/hw/pci/pci.h: extern bool pci_available;
> - #define PCI_DEVICE_ID_VIRTIO_RNG 0x1005
> - #define PCI_DEVICE_ID_VIRTIO_9P 0x1009
> - #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012
> -+#define PCI_DEVICE_ID_VIRTIO_SND 0x1019
> -
> - /*
> - * modern virtio-pci devices get their id assigned automatically,
> -
> ## include/hw/virtio/virtio-snd.h (new) ##
> @@
> +/*
> @@ include/hw/virtio/virtio-snd.h (new)
> +typedef struct VirtIOSoundPCMStream {
> + VirtIOSoundPCM *pcm;
> + struct virtio_snd_pcm_info info;
> ++ uint32_t id;
> + uint32_t buffer_bytes;
> + uint32_t period_bytes;
> + /* channel position values (VIRTIO_SND_CHMAP_XXX) */
> @@ include/hw/virtio/virtio-snd.h (new)
> + }
> +};
> +#endif
> -
> - ## softmmu/qdev-monitor.c ##
> -@@ softmmu/qdev-monitor.c: static const QDevAlias qdev_alias_table[] = {
> - { "virtio-serial-device", "virtio-serial", QEMU_ARCH_VIRTIO_MMIO },
> - { "virtio-serial-ccw", "virtio-serial", QEMU_ARCH_VIRTIO_CCW },
> - { "virtio-serial-pci", "virtio-serial", QEMU_ARCH_VIRTIO_PCI},
> -+ { "virtio-sound-pci", "virtio-sound", QEMU_ARCH_VIRTIO_PCI},
> - { "virtio-tablet-device", "virtio-tablet", QEMU_ARCH_VIRTIO_MMIO },
> - { "virtio-tablet-ccw", "virtio-tablet", QEMU_ARCH_VIRTIO_CCW },
> - { "virtio-tablet-pci", "virtio-tablet", QEMU_ARCH_VIRTIO_PCI },
>-: ---------- > 2: db527bc9a1 Add virtio-sound-pci device
>-: ---------- > 3: 4c130f066d Implement audio capture in virtio-snd device
>--
>2.39.2
>
next prev parent reply other threads:[~2023-07-13 11:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 15:56 [PATCH v2 0/3] Add VIRTIO sound card Manos Pitsidianakis
2023-06-08 15:56 ` [PATCH v2 1/3] Add virtio-sound device Manos Pitsidianakis
2023-07-17 15:38 ` Alex Bennée
2023-06-08 15:56 ` [PATCH v2 2/3] Add virtio-sound-pci device Manos Pitsidianakis
2023-07-17 16:47 ` Alex Bennée
2023-06-08 15:56 ` [PATCH v2 3/3] Implement audio capture in virtio-snd device Manos Pitsidianakis
2023-07-13 11:00 ` Manos Pitsidianakis [this message]
2023-07-16 17:18 ` [PATCH v2 0/3] Add VIRTIO sound card Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=xqes1.ursoa6rc1qb6@linaro.org \
--to=manos.pitsidianakis@linaro.org \
--cc=Anton.Yakovlev@opensynergy.com \
--cc=Igor.Skalkin@opensynergy.com \
--cc=berrange@redhat.com \
--cc=eduardo@habkost.net \
--cc=kraxel@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).