qemu-trivial.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Weil <sw@weilnetz.de>
To: Jim Meyering <jim@meyering.net>
Cc: qemu-trivial@nongnu.org, Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org, patches@linaro.org
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCHv2] fix some common typos
Date: Mon, 14 May 2012 22:38:32 +0200	[thread overview]
Message-ID: <4FB16D48.8070607@weilnetz.de> (raw)
In-Reply-To: <87k40lwfqz.fsf_-_@rho.meyering.net>

Am 09.05.2012 17:12, schrieb Jim Meyering:
>
> These were identified using: http://github.com/lyda/misspell-check
> and run like this to create a bourne shell script using GNU sed's
> -i option:
>
> git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
> -pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
>
> Manually eliding the FP, "rela->real" and resolving "addres" to
> address (not "adders") we get this:
>
> sed -i '450s!thru!through!' Changelog
> sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
> sed -i '54s!miniscule!minuscule!' disas.c
> sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
> sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
> sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
> sed -i '307s!explictly!explicitly!' qemu-ga.c
> sed -i '490s!preceeding!preceding!' qga/commands-posix.c
> sed -i '792s!addres!address!' qga/commands-posix.c
> sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
>
> Also, manually fix "arithmentic", spotted by Peter Maydell:
>
> sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
>
> Signed-off-by: Jim Meyering <meyering@redhat.com>
> ---
> ...
>> Also "arithmetic".
>
> Thanks. Amended.
>
> Changelog | 2 +-
> coroutine-sigaltstack.c | 2 +-
> disas.c | 2 +-
> hw/usb/hcd-ehci.c | 4 ++--
> qapi-schema-guest.json | 2 +-
> qemu-ga.c | 2 +-
> qga/commands-posix.c | 4 ++--
> tests/tcg/test-mmap.c | 2 +-
> 8 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Changelog b/Changelog
> index 8b63258..13eebef 100644
> --- a/Changelog
> +++ b/Changelog
> @@ -447,7 +447,7 @@ version 0.5.0:
> - multi-target build
> - fixed: no error code in hardware interrupts
> - fixed: pop ss, mov ss, x and sti disable hardware irqs for the next insn
> - - correct single stepping thru string operations
> + - correct single stepping through string operations
> - preliminary SPARC target support (Thomas M. Ogrisegg)
> - tun-fd option (Rusty Russell)
> - automatic IDE geometry detection
> diff --git a/coroutine-sigaltstack.c b/coroutine-sigaltstack.c
> index 7ff2d33..7fa2e85 100644
> --- a/coroutine-sigaltstack.c
> +++ b/coroutine-sigaltstack.c
> @@ -257,7 +257,7 @@ static Coroutine *coroutine_new(void)
> /*
> * Now enter the trampoline again, but this time not as a signal
> * handler. Instead we jump into it directly. The functionally
> - * redundant ping-pong pointer arithmentic is neccessary to avoid
> + * redundant ping-pong pointer arithmetic is necessary to avoid
> * type-conversion warnings related to the `volatile' qualifier and
> * the fact that `jmp_buf' usually is an array type.
> */
> diff --git a/disas.c b/disas.c
> index 27071c3..93d8d30 100644
> --- a/disas.c
> +++ b/disas.c
> @@ -51,7 +51,7 @@ perror_memory (int status, bfd_vma memaddr, struct 
> disassemble_info *info)
> "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
> }
>
> -/* This could be in a separate file, to save miniscule amounts of space
> +/* This could be in a separate file, to save minuscule amounts of space
> in statically linked executables. */
>
> /* Just print the address is hex. This is included for completeness even
> diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
> index 4ff4d40..e759c99 100644
> --- a/hw/usb/hcd-ehci.c
> +++ b/hw/usb/hcd-ehci.c
> @@ -1091,8 +1091,8 @@ static void ehci_mem_writel(void *ptr, 
> target_phys_addr_t addr, uint32_t val)
> break;
>
> case USBSTS:
> - val &= USBSTS_RO_MASK; // bits 6 thru 31 are RO
> - ehci_clear_usbsts(s, val); // bits 0 thru 5 are R/WC
> + val &= USBSTS_RO_MASK; // bits 6 through 31 are RO
> + ehci_clear_usbsts(s, val); // bits 0 through 5 are R/WC
> val = s->usbsts;
> ehci_set_interrupt(s, 0);
> break;
> diff --git a/qapi-schema-guest.json b/qapi-schema-guest.json
> index d7a073e..692b570 100644
> --- a/qapi-schema-guest.json
> +++ b/qapi-schema-guest.json
> @@ -18,7 +18,7 @@
> # lexer/tokenizer/parser state should be flushed/reset in
> # preparation for reliably receiving the subsequent response. As
> # an optimization, clients may opt to ignore all data until a
> -# sentinel value is receiving to avoid unecessary processing of
> +# sentinel value is receiving to avoid unnecessary processing of
> # stale data.
> #
> # Similarly, clients should also precede this *request*
> diff --git a/qemu-ga.c b/qemu-ga.c
> index 216be39..680997e 100644
> --- a/qemu-ga.c
> +++ b/qemu-ga.c
> @@ -304,7 +304,7 @@ static void ga_disable_non_whitelisted(void)
> g_free(list_head);
> }
>
> -/* [re-]enable all commands, except those explictly blacklisted by 
> user */
> +/* [re-]enable all commands, except those explicitly blacklisted by 
> user */
> static void ga_enable_non_blacklisted(GList *blacklist)
> {
> char **list_head, **list;
> diff --git a/qga/commands-posix.c b/qga/commands-posix.c
> index d58730a..e448431 100644
> --- a/qga/commands-posix.c
> +++ b/qga/commands-posix.c
> @@ -487,7 +487,7 @@ int64_t qmp_guest_fsfreeze_thaw(Error **err)
> * was returned the filesystem was *not* unfrozen by that particular
> * call.
> *
> - * since multiple preceeding FIFREEZEs require multiple calls to FITHAW
> + * since multiple preceding FIFREEZEs require multiple calls to FITHAW
> * to unfreeze, continuing issuing FITHAW until an error is returned,
> * in which case either the filesystem is in an unfreezable state, or,
> * more likely, it was thawed previously (and remains so afterward).
> @@ -789,7 +789,7 @@ GuestNetworkInterfaceList 
> *qmp_guest_network_get_interfaces(Error **errp)
> strncpy(ifr.ifr_name, info->value->name, IF_NAMESIZE);
> if (ioctl(sock, SIOCGIFHWADDR, &ifr) == -1) {
> snprintf(err_msg, sizeof(err_msg),
> - "failed to get MAC addres of %s: %s",
> + "failed to get MAC address of %s: %s",
> ifa->ifa_name,
> strerror(errno));
> error_set(errp, QERR_QGA_COMMAND_FAILED, err_msg);
> diff --git a/tests/tcg/test-mmap.c b/tests/tcg/test-mmap.c
> index c67174a..c418b67 100644
> --- a/tests/tcg/test-mmap.c
> +++ b/tests/tcg/test-mmap.c
> @@ -3,7 +3,7 @@
> *
> * When running qemu-linux-user with the -p flag, you may need to tell
> * this test program about the pagesize because getpagesize() will not 
> reflect
> - * the -p choice. Simply pass one argument beeing the pagesize.
> + * the -p choice. Simply pass one argument being the pagesize.
> *
> * Copyright (c) 2007 AXIS Communications AB
> * Written by Edgar E. Iglesias.
> --
> 1.7.10.1.487.ga3935e6
>

Hello,

thanks. I included your patch in my pull request which was now
committed to qemu master, so your patch will be in QEMU 1.1.

Regards,
Stefan W.



      parent reply	other threads:[~2012-05-14 20:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-09 14:42 [Qemu-trivial] [PATCH] fix some common typos Jim Meyering
2012-05-09 14:48 ` [Qemu-trivial] [Qemu-devel] " Peter Maydell
2012-05-09 15:12   ` [Qemu-trivial] [PATCHv2] " Jim Meyering
2012-05-09 15:13     ` Peter Maydell
2012-05-14 20:38     ` Stefan Weil [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FB16D48.8070607@weilnetz.de \
    --to=sw@weilnetz.de \
    --cc=jim@meyering.net \
    --cc=patches@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-trivial@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).