[PATCH v6 00/10] SLUB percpu sheaves

[PATCH v6 00/10] SLUB percpu sheaves

[Vlastimil Babka]

Hi,

This series adds an opt-in percpu array-based caching layer to SLUB.
It has evolved to a state where kmem caches with sheaves are compatible
with all SLUB features (slub_debug, SLUB_TINY, NUMA locality
considerations). My hope is therefore that it can eventually be enabled
for all kmem caches and replace the cpu (partial) slabs.

This v6 will be now added to slab/for-next and to collect further
reviews and testing/benchmarking. The more involved conversion of maple
tree was removed and will be posted separately after addressing review
feedback and broken self-tests.

Note the name "sheaf" was invented by Matthew Wilcox so we don't call
the arrays magazines like the original Bonwick paper. The per-NUMA-node
cache of sheaves is thus called "barn".

This caching may seem similar to the arrays in SLAB, but there are some
important differences:

- does not distinguish NUMA locality, thus there are no per-node
  "shared" arrays (with possible lock contention) and no "alien" arrays
  that would need periodical flushing
  - NUMA restricted allocations and strict_numa mode is still honoured,
    the percpu sheaves are bypassed for those allocations
  - a later patch (for separate evaluation) makes freeing remote objects
    bypass sheaves so sheaves contain mostly (not strictly) local objects
- improves kfree_rcu() handling by reusing whole sheaves
- there is an API for obtaining a preallocated sheaf that can be used
  for guaranteed and efficient allocations in a restricted context, when
  the upper bound for needed objects is known but rarely reached
- opt-in, not used for every cache (for now)

The motivation comes mainly from the ongoing work related to VMA locking
scalability and the related maple tree operations. This is why VMA and
maple nodes caches are sheaf-enabled in the patchset. In v5 I include
Liam's patches for full maple tree conversion that uses the improved
preallocation API.

A sheaf-enabled cache has the following expected advantages:

- Cheaper fast paths. For allocations, instead of local double cmpxchg,
  thanks to local_trylock() it becomes a preempt_disable() and no atomic
  operations. Same for freeing, which is otherwise a local double cmpxchg
  only for short term allocations (so the same slab is still active on the
  same cpu when freeing the object) and a more costly locked double
  cmpxchg otherwise.

- kfree_rcu() batching and recycling. kfree_rcu() will put objects to a
  separate percpu sheaf and only submit the whole sheaf to call_rcu()
  when full. After the grace period, the sheaf can be used for
  allocations, which is more efficient than freeing and reallocating
  individual slab objects (even with the batching done by kfree_rcu()
  implementation itself). In case only some cpus are allowed to handle rcu
  callbacks, the sheaf can still be made available to other cpus on the
  same node via the shared barn. The maple_node cache uses kfree_rcu() and
  thus can benefit from this.

- Preallocation support. A prefilled sheaf can be privately borrowed to
  perform a short term operation that is not allowed to block in the
  middle and may need to allocate some objects. If an upper bound (worst
  case) for the number of allocations is known, but only much fewer
  allocations actually needed on average, borrowing and returning a sheaf
  is much more efficient then a bulk allocation for the worst case
  followed by a bulk free of the many unused objects. Maple tree write
  operations should benefit from this.

- Compatibility with slub_debug. When slub_debug is enabled for a cache,
  we simply don't create the percpu sheaves so that the debugging hooks
  (at the node partial list slowpaths) are reached as before. The same
  thing is done for CONFIG_SLUB_TINY. Sheaf preallocation still works by
  reusing the (ineffective) paths for requests exceeding the cache's
  sheaf_capacity. This is in line with the existing approach where
  debugging bypasses the fast paths and SLUB_TINY preferes memory
  savings over performance.

GIT TREES:

this series: https://git.kernel.org/vbabka/l/slub-percpu-sheaves-v6r3
It is based on v6.17-rc3.

this series plus a microbenchmark hacked into slub_kunit:
https://git.kernel.org/vbabka/l/slub-percpu-sheaves-v6-benchmarking

It allows evaluating overhead of the added sheaves code, and benefits
for single-threaded allocation/frees of varying batch size. I plan to
look into adding multi-threaded scenarios too.

The last commit there also adds sheaves to every cache to allow
measuring effects on other caches than vma and maple node. Note these
measurements should be compared to slab_nomerge boots without sheaves,
as adding sheaves makes caches unmergeable.

RESULTS:

In order to get some numbers that should be only due to differences in
implementation and no cache layout side-effects in users of the slab
objects etc, I have started with a in-kernel microbenchmark that does
allocating and freeing from a slab cache with or without sheaves and/or
memcg. It's either alternating single object alloc and free, or
allocates 10 objects and frees them, then 100, then 1000
- in order to see the effects of exhausting percpu sheaves or barn, or
(without sheaves) the percpu slabs. The order of objects to free can
be also shuffled instead of FIFO - to stress the non-sheaf freeing
slowpath more.

Measurements done on Ryzen 7 5700, bare metal.

The first question was how just having the sheaves implementation affects
existing no-sheaf caches due to the extra (unused) code. I have experimented
with changing inlining and adding unlikely() to the sheaves case. The
optimum seems is what's currently in the implementation - fast-path sheaves
usage is inlined, any handling of main sheaf empty on alloc/full on free is
a separate function, and the if (s->sheaf_capacity) has neither likely() nor
unlikely(). When I added unlikely() it destroyed the performance of sheaves
completely.

So the result is that with batch size 10, there's 2.4% overhead, and the
other cases are all impacted less than this. Hopefully acceptable with the
plan that eventually there would be sheaves everywhere and the current
cpu (partial) slabs scheme removed.

As for benefits of enabling sheaves (capacity=32) see the results below,
looks all good here. Of course this microbenchmark is not a complete
story though for at least these reasons:

- no kfree_rcu() evaluation
- doesn't show barn spinlock contention effects. In theory shouldn't be
worse than without sheaves because after exhausting cpu (partial) slabs, the
list_lock has to be taken. Sheaf capacity vs capacity of partial slabs is a
matter of tuning.

---------------------------------
 BATCH SIZE: 1 SHUFFLED: NO
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 115660272
 bench: no memcg, sheaves
 average (excl. iter 0): 95734972
 sheaves better by 17.2%
 bench: memcg, no sheaves
 average (excl. iter 0): 163682964
 bench: memcg, sheaves
 average (excl. iter 0): 144792803
 sheaves better by 11.5%

 ---------------------------------
 BATCH SIZE: 10 SHUFFLED: NO
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 115496906
 bench: no memcg, sheaves
 average (excl. iter 0): 97781102
 sheaves better by 15.3%
 bench: memcg, no sheaves
 average (excl. iter 0): 162771491
 bench: memcg, sheaves
 average (excl. iter 0): 144746490
 sheaves better by 11.0%

 ---------------------------------
 BATCH SIZE: 100 SHUFFLED: NO
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 151796052
 bench: no memcg, sheaves
 average (excl. iter 0): 104641753
 sheaves better by 31.0%
 bench: memcg, no sheaves
 average (excl. iter 0): 200733436
 bench: memcg, sheaves
 average (excl. iter 0): 151340989
 sheaves better by 24.6%

 ---------------------------------
 BATCH SIZE: 1000 SHUFFLED: NO
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 187623118
 bench: no memcg, sheaves
 average (excl. iter 0): 130914624
 sheaves better by 30.2%
 bench: memcg, no sheaves
 average (excl. iter 0): 240239575
 bench: memcg, sheaves
 average (excl. iter 0): 181474462
 sheaves better by 24.4%

 ---------------------------------
 BATCH SIZE: 10 SHUFFLED: YES
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 115110219
 bench: no memcg, sheaves
 average (excl. iter 0): 100597405
 sheaves better by 12.6%
 bench: memcg, no sheaves
 average (excl. iter 0): 163573377
 bench: memcg, sheaves
 average (excl. iter 0): 144535545
 sheaves better by 11.6%

 ---------------------------------
 BATCH SIZE: 100 SHUFFLED: YES
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 152457970
 bench: no memcg, sheaves
 average (excl. iter 0): 108720274
 sheaves better by 28.6%
 bench: memcg, no sheaves
 average (excl. iter 0): 203478732
 bench: memcg, sheaves
 average (excl. iter 0): 151241821
 sheaves better by 25.6%

 ---------------------------------
 BATCH SIZE: 1000 SHUFFLED: YES
 ---------------------------------

 bench: no memcg, no sheaves
 average (excl. iter 0): 189950559
 bench: no memcg, sheaves
 average (excl. iter 0): 177934450
 sheaves better by 6.3%
 bench: memcg, no sheaves
 average (excl. iter 0): 242988187
 bench: memcg, sheaves
 average (excl. iter 0): 221609979
 sheaves better by 8.7%

Vlastimil

---
Changes in v6:
- Applied feedback and review tags from Suren and Harry (thanks!)
- Separate patch for init_kmem_cache_nodes() error handling change.
- Removed the more involved maple tree conversion to be posted as a
  separate followup series.
- Link to v5: https://patch.msgid.link/20250723-slub-percpu-caches-v5-0-b792cd830f5d@suse.cz

Changes in v5:
- Apply review tags (Harry, Suren) except where changed too much (first
  patch).
- Handle CONFIG_SLUB_TINY by not creating percpu sheaves (Harry)
- Apply review feedback (typos, comments).
- Extract handling sheaf slow paths to separate non-inline functions
  __pcs_handle_empty() and __pcs_handle_full().
- Fix empty sheaf leak in rcu_free_sheaf() (Suren)
- Add "allow NUMA restricted allocations to use percpu sheaves".
- Add Liam's maple tree full sheaf conversion patches for easier
  evaluation.
- Rebase to v6.16-rc1.
- Link to v4: https://patch.msgid.link/20250425-slub-percpu-caches-v4-0-8a636982b4a4@suse.cz

Changes in v4:
- slub_debug disables sheaves for the cache in order to work properly
- strict_numa mode works as intended
- added a separate patch to make freeing remote objects skip sheaves
- various code refactoring suggested by Suren and Harry
- removed less useful stat counters and added missing ones for barn
  and prefilled sheaf events
- Link to v3: https://lore.kernel.org/r/20250317-slub-percpu-caches-v3-0-9d9884d8b643@suse.cz

Changes in v3:
- Squash localtry_lock conversion so it's used immediately.
- Incorporate feedback and add tags from Suren and Harry - thanks!
  - Mostly adding comments and some refactoring.
  - Fixes for kfree_rcu_sheaf() vmalloc handling, cpu hotremove
    flushing.
  - Fix wrong condition in kmem_cache_return_sheaf() that may have
    affected performance negatively.
  - Refactoring of free_to_pcs()
- Link to v2: https://lore.kernel.org/r/20250214-slub-percpu-caches-v2-0-88592ee0966a@suse.cz

Changes in v2:
- Removed kfree_rcu() destructors support as VMAs will not need it
  anymore after [3] is merged.
- Changed to localtry_lock_t borrowed from [2] instead of an own
  implementation of the same idea.
- Many fixes and improvements thanks to Liam's adoption for maple tree
  nodes.
- Userspace Testing stubs by Liam.
- Reduced limitations/todos - hooking to kfree_rcu() is complete,
  prefilled sheaves can exceed cache's sheaf_capacity.
- Link to v1: https://lore.kernel.org/r/20241112-slub-percpu-caches-v1-0-ddc0bdc27e05@suse.cz

---
Liam R. Howlett (1):
      tools/testing: Add testing support for slab caches with sheaves

Vlastimil Babka (9):
      slab: simplify init_kmem_cache_nodes() error handling
      slab: add opt-in caching layer of percpu sheaves
      slab: add sheaf support for batching kfree_rcu() operations
      slab: sheaf prefilling for guaranteed allocations
      slab: determine barn status racily outside of lock
      slab: skip percpu sheaves for remote object freeing
      slab: allow NUMA restricted allocations to use percpu sheaves
      mm, vma: use percpu sheaves for vm_area_struct cache
      maple_tree: use percpu sheaves for maple_node_cache

 include/linux/slab.h         |   47 ++
 lib/maple_tree.c             |    9 +-
 mm/slab.h                    |    4 +
 mm/slab_common.c             |   32 +-
 mm/slub.c                    | 1669 ++++++++++++++++++++++++++++++++++++++++--
 mm/vma_init.c                |    1 +
 tools/include/linux/slab.h   |   41 +-
 tools/testing/shared/linux.c |   12 +-
 8 files changed, 1753 insertions(+), 62 deletions(-)
---
base-commit: 82efd569a8909f2b13140c1b3de88535aea0b051
change-id: 20231128-slub-percpu-caches-9441892011d7

Best regards,
-- 
Vlastimil Babka <vbabka@suse.cz>

[PATCH v6 01/10] slab: simplify init_kmem_cache_nodes() error handling

[Vlastimil Babka]

We don't need to call free_kmem_cache_nodes() immediately when failing
to allocate a kmem_cache_node, because when we return 0,
do_kmem_cache_create() calls __kmem_cache_release() which also performs
free_kmem_cache_nodes().

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/slub.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 30003763d224c2704a4b93082b8b47af12dcffc5..9f671ec76131c4b0b28d5d568aa45842b5efb6d4 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5669,10 +5669,8 @@ static int init_kmem_cache_nodes(struct kmem_cache *s)
 		n = kmem_cache_alloc_node(kmem_cache_node,
 						GFP_KERNEL, node);
 
-		if (!n) {
-			free_kmem_cache_nodes(s);
+		if (!n)
 			return 0;
-		}
 
 		init_kmem_cache_node(n);
 		s->node[node] = n;

-- 
2.51.0

[PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Vlastimil Babka]

Specifying a non-zero value for a new struct kmem_cache_args field
sheaf_capacity will setup a caching layer of percpu arrays called
sheaves of given capacity for the created cache.

Allocations from the cache will allocate via the percpu sheaves (main or
spare) as long as they have no NUMA node preference. Frees will also
put the object back into one of the sheaves.

When both percpu sheaves are found empty during an allocation, an empty
sheaf may be replaced with a full one from the per-node barn. If none
are available and the allocation is allowed to block, an empty sheaf is
refilled from slab(s) by an internal bulk alloc operation. When both
percpu sheaves are full during freeing, the barn can replace a full one
with an empty one, unless over a full sheaves limit. In that case a
sheaf is flushed to slab(s) by an internal bulk free operation. Flushing
sheaves and barns is also wired to the existing cpu flushing and cache
shrinking operations.

The sheaves do not distinguish NUMA locality of the cached objects. If
an allocation is requested with kmem_cache_alloc_node() (or a mempolicy
with strict_numa mode enabled) with a specific node (not NUMA_NO_NODE),
the sheaves are bypassed.

The bulk operations exposed to slab users also try to utilize the
sheaves as long as the necessary (full or empty) sheaves are available
on the cpu or in the barn. Once depleted, they will fallback to bulk
alloc/free to slabs directly to avoid double copying.

The sheaf_capacity value is exported in sysfs for observability.

Sysfs CONFIG_SLUB_STATS counters alloc_cpu_sheaf and free_cpu_sheaf
count objects allocated or freed using the sheaves (and thus not
counting towards the other alloc/free path counters). Counters
sheaf_refill and sheaf_flush count objects filled or flushed from or to
slab pages, and can be used to assess how effective the caching is. The
refill and flush operations will also count towards the usual
alloc_fastpath/slowpath, free_fastpath/slowpath and other counters for
the backing slabs.  For barn operations, barn_get and barn_put count how
many full sheaves were get from or put to the barn, the _fail variants
count how many such requests could not be satisfied mainly  because the
barn was either empty or full. While the barn also holds empty sheaves
to make some operations easier, these are not as critical to mandate own
counters.  Finally, there are sheaf_alloc/sheaf_free counters.

Access to the percpu sheaves is protected by local_trylock() when
potential callers include irq context, and local_lock() otherwise (such
as when we already know the gfp flags allow blocking). The trylock
failures should be rare and we can easily fallback. Each per-NUMA-node
barn has a spin_lock.

When slub_debug is enabled for a cache with sheaf_capacity also
specified, the latter is ignored so that allocations and frees reach the
slow path where debugging hooks are processed. Similarly, we ignore it
with CONFIG_SLUB_TINY which prefers low memory usage to performance.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 include/linux/slab.h |   31 ++
 mm/slab.h            |    2 +
 mm/slab_common.c     |    5 +-
 mm/slub.c            | 1159 +++++++++++++++++++++++++++++++++++++++++++++++---
 4 files changed, 1135 insertions(+), 62 deletions(-)

diff --git a/include/linux/slab.h b/include/linux/slab.h
index d5a8ab98035cf3e3d9043e3b038e1bebeff05b52..49acbcdc6696fd120c402adf757b3f41660ad50a 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -335,6 +335,37 @@ struct kmem_cache_args {
 	 * %NULL means no constructor.
 	 */
 	void (*ctor)(void *);
+	/**
+	 * @sheaf_capacity: Enable sheaves of given capacity for the cache.
+	 *
+	 * With a non-zero value, allocations from the cache go through caching
+	 * arrays called sheaves. Each cpu has a main sheaf that's always
+	 * present, and a spare sheaf that may be not present. When both become
+	 * empty, there's an attempt to replace an empty sheaf with a full sheaf
+	 * from the per-node barn.
+	 *
+	 * When no full sheaf is available, and gfp flags allow blocking, a
+	 * sheaf is allocated and filled from slab(s) using bulk allocation.
+	 * Otherwise the allocation falls back to the normal operation
+	 * allocating a single object from a slab.
+	 *
+	 * Analogically when freeing and both percpu sheaves are full, the barn
+	 * may replace it with an empty sheaf, unless it's over capacity. In
+	 * that case a sheaf is bulk freed to slab pages.
+	 *
+	 * The sheaves do not enforce NUMA placement of objects, so allocations
+	 * via kmem_cache_alloc_node() with a node specified other than
+	 * NUMA_NO_NODE will bypass them.
+	 *
+	 * Bulk allocation and free operations also try to use the cpu sheaves
+	 * and barn, but fallback to using slab pages directly.
+	 *
+	 * When slub_debug is enabled for the cache, the sheaf_capacity argument
+	 * is ignored.
+	 *
+	 * %0 means no sheaves will be created.
+	 */
+	unsigned int sheaf_capacity;
 };
 
 struct kmem_cache *__kmem_cache_create_args(const char *name,
diff --git a/mm/slab.h b/mm/slab.h
index 248b34c839b7ca39cf14e139c62d116efb97d30f..206987ce44a4d053ebe3b5e50784d2dd23822cd1 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -235,6 +235,7 @@ struct kmem_cache {
 #ifndef CONFIG_SLUB_TINY
 	struct kmem_cache_cpu __percpu *cpu_slab;
 #endif
+	struct slub_percpu_sheaves __percpu *cpu_sheaves;
 	/* Used for retrieving partial slabs, etc. */
 	slab_flags_t flags;
 	unsigned long min_partial;
@@ -248,6 +249,7 @@ struct kmem_cache {
 	/* Number of per cpu partial slabs to keep around */
 	unsigned int cpu_partial_slabs;
 #endif
+	unsigned int sheaf_capacity;
 	struct kmem_cache_order_objects oo;
 
 	/* Allocation and freeing of slabs */
diff --git a/mm/slab_common.c b/mm/slab_common.c
index bfe7c40eeee1a01c175766935c1e3c0304434a53..e2b197e47866c30acdbd1fee4159f262a751c5a7 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -163,6 +163,9 @@ int slab_unmergeable(struct kmem_cache *s)
 		return 1;
 #endif
 
+	if (s->cpu_sheaves)
+		return 1;
+
 	/*
 	 * We may have set a slab to be unmergeable during bootstrap.
 	 */
@@ -321,7 +324,7 @@ struct kmem_cache *__kmem_cache_create_args(const char *name,
 		    object_size - args->usersize < args->useroffset))
 		args->usersize = args->useroffset = 0;
 
-	if (!args->usersize)
+	if (!args->usersize && !args->sheaf_capacity)
 		s = __kmem_cache_alias(name, object_size, args->align, flags,
 				       args->ctor);
 	if (s)
diff --git a/mm/slub.c b/mm/slub.c
index 9f671ec76131c4b0b28d5d568aa45842b5efb6d4..0822a817c28c2c4666e853ef0f433842c64f607a 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -363,8 +363,10 @@ static inline void debugfs_slab_add(struct kmem_cache *s) { }
 #endif
 
 enum stat_item {
+	ALLOC_PCS,		/* Allocation from percpu sheaf */
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
 	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
+	FREE_PCS,		/* Free to percpu sheaf */
 	FREE_FASTPATH,		/* Free to cpu slab */
 	FREE_SLOWPATH,		/* Freeing not to cpu slab */
 	FREE_FROZEN,		/* Freeing to frozen slab */
@@ -389,6 +391,14 @@ enum stat_item {
 	CPU_PARTIAL_FREE,	/* Refill cpu partial on free */
 	CPU_PARTIAL_NODE,	/* Refill cpu partial from node partial */
 	CPU_PARTIAL_DRAIN,	/* Drain cpu partial to node partial */
+	SHEAF_FLUSH,		/* Objects flushed from a sheaf */
+	SHEAF_REFILL,		/* Objects refilled to a sheaf */
+	SHEAF_ALLOC,		/* Allocation of an empty sheaf */
+	SHEAF_FREE,		/* Freeing of an empty sheaf */
+	BARN_GET,		/* Got full sheaf from barn */
+	BARN_GET_FAIL,		/* Failed to get full sheaf from barn */
+	BARN_PUT,		/* Put full sheaf to barn */
+	BARN_PUT_FAIL,		/* Failed to put full sheaf to barn */
 	NR_SLUB_STAT_ITEMS
 };
 
@@ -435,6 +445,33 @@ void stat_add(const struct kmem_cache *s, enum stat_item si, int v)
 #endif
 }
 
+#define MAX_FULL_SHEAVES	10
+#define MAX_EMPTY_SHEAVES	10
+
+struct node_barn {
+	spinlock_t lock;
+	struct list_head sheaves_full;
+	struct list_head sheaves_empty;
+	unsigned int nr_full;
+	unsigned int nr_empty;
+};
+
+struct slab_sheaf {
+	union {
+		struct rcu_head rcu_head;
+		struct list_head barn_list;
+	};
+	unsigned int size;
+	void *objects[];
+};
+
+struct slub_percpu_sheaves {
+	local_trylock_t lock;
+	struct slab_sheaf *main; /* never NULL when unlocked */
+	struct slab_sheaf *spare; /* empty or full, may be NULL */
+	struct node_barn *barn;
+};
+
 /*
  * The slab lists for all objects.
  */
@@ -447,6 +484,7 @@ struct kmem_cache_node {
 	atomic_long_t total_objects;
 	struct list_head full;
 #endif
+	struct node_barn *barn;
 };
 
 static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
@@ -470,12 +508,19 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
  */
 static nodemask_t slab_nodes;
 
-#ifndef CONFIG_SLUB_TINY
 /*
  * Workqueue used for flush_cpu_slab().
  */
 static struct workqueue_struct *flushwq;
-#endif
+
+struct slub_flush_work {
+	struct work_struct work;
+	struct kmem_cache *s;
+	bool skip;
+};
+
+static DEFINE_MUTEX(flush_lock);
+static DEFINE_PER_CPU(struct slub_flush_work, slub_flush);
 
 /********************************************************************
  * 			Core slab cache functions
@@ -2473,6 +2518,360 @@ static void *setup_object(struct kmem_cache *s, void *object)
 	return object;
 }
 
+static struct slab_sheaf *alloc_empty_sheaf(struct kmem_cache *s, gfp_t gfp)
+{
+	struct slab_sheaf *sheaf = kzalloc(struct_size(sheaf, objects,
+					s->sheaf_capacity), gfp);
+
+	if (unlikely(!sheaf))
+		return NULL;
+
+	stat(s, SHEAF_ALLOC);
+
+	return sheaf;
+}
+
+static void free_empty_sheaf(struct kmem_cache *s, struct slab_sheaf *sheaf)
+{
+	kfree(sheaf);
+
+	stat(s, SHEAF_FREE);
+}
+
+static int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags,
+				   size_t size, void **p);
+
+
+static int refill_sheaf(struct kmem_cache *s, struct slab_sheaf *sheaf,
+			 gfp_t gfp)
+{
+	int to_fill = s->sheaf_capacity - sheaf->size;
+	int filled;
+
+	if (!to_fill)
+		return 0;
+
+	filled = __kmem_cache_alloc_bulk(s, gfp, to_fill,
+					 &sheaf->objects[sheaf->size]);
+
+	sheaf->size += filled;
+
+	stat_add(s, SHEAF_REFILL, filled);
+
+	if (filled < to_fill)
+		return -ENOMEM;
+
+	return 0;
+}
+
+
+static struct slab_sheaf *alloc_full_sheaf(struct kmem_cache *s, gfp_t gfp)
+{
+	struct slab_sheaf *sheaf = alloc_empty_sheaf(s, gfp);
+
+	if (!sheaf)
+		return NULL;
+
+	if (refill_sheaf(s, sheaf, gfp)) {
+		free_empty_sheaf(s, sheaf);
+		return NULL;
+	}
+
+	return sheaf;
+}
+
+/*
+ * Maximum number of objects freed during a single flush of main pcs sheaf.
+ * Translates directly to an on-stack array size.
+ */
+#define PCS_BATCH_MAX	32U
+
+static void __kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p);
+
+/*
+ * Free all objects from the main sheaf. In order to perform
+ * __kmem_cache_free_bulk() outside of cpu_sheaves->lock, work in batches where
+ * object pointers are moved to a on-stack array under the lock. To bound the
+ * stack usage, limit each batch to PCS_BATCH_MAX.
+ *
+ * returns true if at least partially flushed
+ */
+static bool sheaf_flush_main(struct kmem_cache *s)
+{
+	struct slub_percpu_sheaves *pcs;
+	unsigned int batch, remaining;
+	void *objects[PCS_BATCH_MAX];
+	struct slab_sheaf *sheaf;
+	bool ret = false;
+
+next_batch:
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		return ret;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+	sheaf = pcs->main;
+
+	batch = min(PCS_BATCH_MAX, sheaf->size);
+
+	sheaf->size -= batch;
+	memcpy(objects, sheaf->objects + sheaf->size, batch * sizeof(void *));
+
+	remaining = sheaf->size;
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	__kmem_cache_free_bulk(s, batch, &objects[0]);
+
+	stat_add(s, SHEAF_FLUSH, batch);
+
+	ret = true;
+
+	if (remaining)
+		goto next_batch;
+
+	return ret;
+}
+
+/*
+ * Free all objects from a sheaf that's unused, i.e. not linked to any
+ * cpu_sheaves, so we need no locking and batching. The locking is also not
+ * necessary when flushing cpu's sheaves (both spare and main) during cpu
+ * hotremove as the cpu is not executing anymore.
+ */
+static void sheaf_flush_unused(struct kmem_cache *s, struct slab_sheaf *sheaf)
+{
+	if (!sheaf->size)
+		return;
+
+	stat_add(s, SHEAF_FLUSH, sheaf->size);
+
+	__kmem_cache_free_bulk(s, sheaf->size, &sheaf->objects[0]);
+
+	sheaf->size = 0;
+}
+
+/*
+ * Caller needs to make sure migration is disabled in order to fully flush
+ * single cpu's sheaves
+ *
+ * must not be called from an irq
+ *
+ * flushing operations are rare so let's keep it simple and flush to slabs
+ * directly, skipping the barn
+ */
+static void pcs_flush_all(struct kmem_cache *s)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct slab_sheaf *spare;
+
+	local_lock(&s->cpu_sheaves->lock);
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	spare = pcs->spare;
+	pcs->spare = NULL;
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	if (spare) {
+		sheaf_flush_unused(s, spare);
+		free_empty_sheaf(s, spare);
+	}
+
+	sheaf_flush_main(s);
+}
+
+static void __pcs_flush_all_cpu(struct kmem_cache *s, unsigned int cpu)
+{
+	struct slub_percpu_sheaves *pcs;
+
+	pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
+
+	/* The cpu is not executing anymore so we don't need pcs->lock */
+	sheaf_flush_unused(s, pcs->main);
+	if (pcs->spare) {
+		sheaf_flush_unused(s, pcs->spare);
+		free_empty_sheaf(s, pcs->spare);
+		pcs->spare = NULL;
+	}
+}
+
+static void pcs_destroy(struct kmem_cache *s)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct slub_percpu_sheaves *pcs;
+
+		pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
+
+		/* can happen when unwinding failed create */
+		if (!pcs->main)
+			continue;
+
+		/*
+		 * We have already passed __kmem_cache_shutdown() so everything
+		 * was flushed and there should be no objects allocated from
+		 * slabs, otherwise kmem_cache_destroy() would have aborted.
+		 * Therefore something would have to be really wrong if the
+		 * warnings here trigger, and we should rather leave objects and
+		 * sheaves to leak in that case.
+		 */
+
+		WARN_ON(pcs->spare);
+
+		if (!WARN_ON(pcs->main->size)) {
+			free_empty_sheaf(s, pcs->main);
+			pcs->main = NULL;
+		}
+	}
+
+	free_percpu(s->cpu_sheaves);
+	s->cpu_sheaves = NULL;
+}
+
+static struct slab_sheaf *barn_get_empty_sheaf(struct node_barn *barn)
+{
+	struct slab_sheaf *empty = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	if (barn->nr_empty) {
+		empty = list_first_entry(&barn->sheaves_empty,
+					 struct slab_sheaf, barn_list);
+		list_del(&empty->barn_list);
+		barn->nr_empty--;
+	}
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+
+	return empty;
+}
+
+/*
+ * The following two functions are used mainly in cases where we have to undo an
+ * intended action due to a race or cpu migration. Thus they do not check the
+ * empty or full sheaf limits for simplicity.
+ */
+
+static void barn_put_empty_sheaf(struct node_barn *barn, struct slab_sheaf *sheaf)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	list_add(&sheaf->barn_list, &barn->sheaves_empty);
+	barn->nr_empty++;
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+}
+
+static void barn_put_full_sheaf(struct node_barn *barn, struct slab_sheaf *sheaf)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	list_add(&sheaf->barn_list, &barn->sheaves_full);
+	barn->nr_full++;
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+}
+
+/*
+ * If a full sheaf is available, return it and put the supplied empty one to
+ * barn. We ignore the limit on empty sheaves as the number of sheaves doesn't
+ * change.
+ */
+static struct slab_sheaf *
+barn_replace_empty_sheaf(struct node_barn *barn, struct slab_sheaf *empty)
+{
+	struct slab_sheaf *full = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	if (barn->nr_full) {
+		full = list_first_entry(&barn->sheaves_full, struct slab_sheaf,
+					barn_list);
+		list_del(&full->barn_list);
+		list_add(&empty->barn_list, &barn->sheaves_empty);
+		barn->nr_full--;
+		barn->nr_empty++;
+	}
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+
+	return full;
+}
+
+/*
+ * If an empty sheaf is available, return it and put the supplied full one to
+ * barn. But if there are too many full sheaves, reject this with -E2BIG.
+ */
+static struct slab_sheaf *
+barn_replace_full_sheaf(struct node_barn *barn, struct slab_sheaf *full)
+{
+	struct slab_sheaf *empty;
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	if (barn->nr_full >= MAX_FULL_SHEAVES) {
+		empty = ERR_PTR(-E2BIG);
+	} else if (!barn->nr_empty) {
+		empty = ERR_PTR(-ENOMEM);
+	} else {
+		empty = list_first_entry(&barn->sheaves_empty, struct slab_sheaf,
+					 barn_list);
+		list_del(&empty->barn_list);
+		list_add(&full->barn_list, &barn->sheaves_full);
+		barn->nr_empty--;
+		barn->nr_full++;
+	}
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+
+	return empty;
+}
+
+static void barn_init(struct node_barn *barn)
+{
+	spin_lock_init(&barn->lock);
+	INIT_LIST_HEAD(&barn->sheaves_full);
+	INIT_LIST_HEAD(&barn->sheaves_empty);
+	barn->nr_full = 0;
+	barn->nr_empty = 0;
+}
+
+static void barn_shrink(struct kmem_cache *s, struct node_barn *barn)
+{
+	struct list_head empty_list;
+	struct list_head full_list;
+	struct slab_sheaf *sheaf, *sheaf2;
+	unsigned long flags;
+
+	INIT_LIST_HEAD(&empty_list);
+	INIT_LIST_HEAD(&full_list);
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	list_splice_init(&barn->sheaves_full, &full_list);
+	barn->nr_full = 0;
+	list_splice_init(&barn->sheaves_empty, &empty_list);
+	barn->nr_empty = 0;
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+
+	list_for_each_entry_safe(sheaf, sheaf2, &full_list, barn_list) {
+		sheaf_flush_unused(s, sheaf);
+		free_empty_sheaf(s, sheaf);
+	}
+
+	list_for_each_entry_safe(sheaf, sheaf2, &empty_list, barn_list)
+		free_empty_sheaf(s, sheaf);
+}
+
 /*
  * Slab allocation and freeing
  */
@@ -3344,11 +3743,42 @@ static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu)
 	put_partials_cpu(s, c);
 }
 
-struct slub_flush_work {
-	struct work_struct work;
-	struct kmem_cache *s;
-	bool skip;
-};
+static inline void flush_this_cpu_slab(struct kmem_cache *s)
+{
+	struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab);
+
+	if (c->slab)
+		flush_slab(s, c);
+
+	put_partials(s);
+}
+
+static bool has_cpu_slab(int cpu, struct kmem_cache *s)
+{
+	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+
+	return c->slab || slub_percpu_partial(c);
+}
+
+#else /* CONFIG_SLUB_TINY */
+static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu) { }
+static inline bool has_cpu_slab(int cpu, struct kmem_cache *s) { return false; }
+static inline void flush_this_cpu_slab(struct kmem_cache *s) { }
+#endif /* CONFIG_SLUB_TINY */
+
+static bool has_pcs_used(int cpu, struct kmem_cache *s)
+{
+	struct slub_percpu_sheaves *pcs;
+
+	if (!s->cpu_sheaves)
+		return false;
+
+	pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
+
+	return (pcs->spare || pcs->main->size);
+}
+
+static void pcs_flush_all(struct kmem_cache *s);
 
 /*
  * Flush cpu slab.
@@ -3358,30 +3788,18 @@ struct slub_flush_work {
 static void flush_cpu_slab(struct work_struct *w)
 {
 	struct kmem_cache *s;
-	struct kmem_cache_cpu *c;
 	struct slub_flush_work *sfw;
 
 	sfw = container_of(w, struct slub_flush_work, work);
 
 	s = sfw->s;
-	c = this_cpu_ptr(s->cpu_slab);
-
-	if (c->slab)
-		flush_slab(s, c);
-
-	put_partials(s);
-}
 
-static bool has_cpu_slab(int cpu, struct kmem_cache *s)
-{
-	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+	if (s->cpu_sheaves)
+		pcs_flush_all(s);
 
-	return c->slab || slub_percpu_partial(c);
+	flush_this_cpu_slab(s);
 }
 
-static DEFINE_MUTEX(flush_lock);
-static DEFINE_PER_CPU(struct slub_flush_work, slub_flush);
-
 static void flush_all_cpus_locked(struct kmem_cache *s)
 {
 	struct slub_flush_work *sfw;
@@ -3392,7 +3810,7 @@ static void flush_all_cpus_locked(struct kmem_cache *s)
 
 	for_each_online_cpu(cpu) {
 		sfw = &per_cpu(slub_flush, cpu);
-		if (!has_cpu_slab(cpu, s)) {
+		if (!has_cpu_slab(cpu, s) && !has_pcs_used(cpu, s)) {
 			sfw->skip = true;
 			continue;
 		}
@@ -3428,19 +3846,15 @@ static int slub_cpu_dead(unsigned int cpu)
 	struct kmem_cache *s;
 
 	mutex_lock(&slab_mutex);
-	list_for_each_entry(s, &slab_caches, list)
+	list_for_each_entry(s, &slab_caches, list) {
 		__flush_cpu_slab(s, cpu);
+		if (s->cpu_sheaves)
+			__pcs_flush_all_cpu(s, cpu);
+	}
 	mutex_unlock(&slab_mutex);
 	return 0;
 }
 
-#else /* CONFIG_SLUB_TINY */
-static inline void flush_all_cpus_locked(struct kmem_cache *s) { }
-static inline void flush_all(struct kmem_cache *s) { }
-static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu) { }
-static inline int slub_cpu_dead(unsigned int cpu) { return 0; }
-#endif /* CONFIG_SLUB_TINY */
-
 /*
  * Check if the objects in a per cpu structure fit numa
  * locality expectations.
@@ -4191,30 +4605,237 @@ bool slab_post_alloc_hook(struct kmem_cache *s, struct list_lru *lru,
 }
 
 /*
- * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
- * have the fastpath folded into their functions. So no function call
- * overhead for requests that can be satisfied on the fastpath.
- *
- * The fastpath works by first checking if the lockless freelist can be used.
- * If not then __slab_alloc is called for slow processing.
+ * Replace the empty main sheaf with a (at least partially) full sheaf.
  *
- * Otherwise we can simply pick the next object from the lockless free list.
+ * Must be called with the cpu_sheaves local lock locked. If successful, returns
+ * the pcs pointer and the local lock locked (possibly on a different cpu than
+ * initially called). If not successful, returns NULL and the local lock
+ * unlocked.
  */
-static __fastpath_inline void *slab_alloc_node(struct kmem_cache *s, struct list_lru *lru,
-		gfp_t gfpflags, int node, unsigned long addr, size_t orig_size)
+static struct slub_percpu_sheaves *
+__pcs_replace_empty_main(struct kmem_cache *s, struct slub_percpu_sheaves *pcs, gfp_t gfp)
 {
-	void *object;
-	bool init = false;
+	struct slab_sheaf *empty = NULL;
+	struct slab_sheaf *full;
+	bool can_alloc;
 
-	s = slab_pre_alloc_hook(s, gfpflags);
-	if (unlikely(!s))
-		return NULL;
+	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
 
-	object = kfence_alloc(s, orig_size, gfpflags);
-	if (unlikely(object))
+	if (pcs->spare && pcs->spare->size > 0) {
+		swap(pcs->main, pcs->spare);
+		return pcs;
+	}
+
+	full = barn_replace_empty_sheaf(pcs->barn, pcs->main);
+
+	if (full) {
+		stat(s, BARN_GET);
+		pcs->main = full;
+		return pcs;
+	}
+
+	stat(s, BARN_GET_FAIL);
+
+	can_alloc = gfpflags_allow_blocking(gfp);
+
+	if (can_alloc) {
+		if (pcs->spare) {
+			empty = pcs->spare;
+			pcs->spare = NULL;
+		} else {
+			empty = barn_get_empty_sheaf(pcs->barn);
+		}
+	}
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	if (!can_alloc)
+		return NULL;
+
+	if (empty) {
+		if (!refill_sheaf(s, empty, gfp)) {
+			full = empty;
+		} else {
+			/*
+			 * we must be very low on memory so don't bother
+			 * with the barn
+			 */
+			free_empty_sheaf(s, empty);
+		}
+	} else {
+		full = alloc_full_sheaf(s, gfp);
+	}
+
+	if (!full)
+		return NULL;
+
+	/*
+	 * we can reach here only when gfpflags_allow_blocking
+	 * so this must not be an irq
+	 */
+	local_lock(&s->cpu_sheaves->lock);
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	/*
+	 * If we are returning empty sheaf, we either got it from the
+	 * barn or had to allocate one. If we are returning a full
+	 * sheaf, it's due to racing or being migrated to a different
+	 * cpu. Breaching the barn's sheaf limits should be thus rare
+	 * enough so just ignore them to simplify the recovery.
+	 */
+
+	if (pcs->main->size == 0) {
+		barn_put_empty_sheaf(pcs->barn, pcs->main);
+		pcs->main = full;
+		return pcs;
+	}
+
+	if (!pcs->spare) {
+		pcs->spare = full;
+		return pcs;
+	}
+
+	if (pcs->spare->size == 0) {
+		barn_put_empty_sheaf(pcs->barn, pcs->spare);
+		pcs->spare = full;
+		return pcs;
+	}
+
+	barn_put_full_sheaf(pcs->barn, full);
+	stat(s, BARN_PUT);
+
+	return pcs;
+}
+
+static __fastpath_inline
+void *alloc_from_pcs(struct kmem_cache *s, gfp_t gfp)
+{
+	struct slub_percpu_sheaves *pcs;
+	void *object;
+
+#ifdef CONFIG_NUMA
+	if (static_branch_unlikely(&strict_numa)) {
+		if (current->mempolicy)
+			return NULL;
+	}
+#endif
+
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		return NULL;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (unlikely(pcs->main->size == 0)) {
+		pcs = __pcs_replace_empty_main(s, pcs, gfp);
+		if (unlikely(!pcs))
+			return NULL;
+	}
+
+	object = pcs->main->objects[--pcs->main->size];
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	stat(s, ALLOC_PCS);
+
+	return object;
+}
+
+static __fastpath_inline
+unsigned int alloc_from_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct slab_sheaf *main;
+	unsigned int allocated = 0;
+	unsigned int batch;
+
+next_batch:
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		return allocated;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (unlikely(pcs->main->size == 0)) {
+
+		struct slab_sheaf *full;
+
+		if (pcs->spare && pcs->spare->size > 0) {
+			swap(pcs->main, pcs->spare);
+			goto do_alloc;
+		}
+
+		full = barn_replace_empty_sheaf(pcs->barn, pcs->main);
+
+		if (full) {
+			stat(s, BARN_GET);
+			pcs->main = full;
+			goto do_alloc;
+		}
+
+		stat(s, BARN_GET_FAIL);
+
+		local_unlock(&s->cpu_sheaves->lock);
+
+		/*
+		 * Once full sheaves in barn are depleted, let the bulk
+		 * allocation continue from slab pages, otherwise we would just
+		 * be copying arrays of pointers twice.
+		 */
+		return allocated;
+	}
+
+do_alloc:
+
+	main = pcs->main;
+	batch = min(size, main->size);
+
+	main->size -= batch;
+	memcpy(p, main->objects + main->size, batch * sizeof(void *));
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	stat_add(s, ALLOC_PCS, batch);
+
+	allocated += batch;
+
+	if (batch < size) {
+		p += batch;
+		size -= batch;
+		goto next_batch;
+	}
+
+	return allocated;
+}
+
+
+/*
+ * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
+ * have the fastpath folded into their functions. So no function call
+ * overhead for requests that can be satisfied on the fastpath.
+ *
+ * The fastpath works by first checking if the lockless freelist can be used.
+ * If not then __slab_alloc is called for slow processing.
+ *
+ * Otherwise we can simply pick the next object from the lockless free list.
+ */
+static __fastpath_inline void *slab_alloc_node(struct kmem_cache *s, struct list_lru *lru,
+		gfp_t gfpflags, int node, unsigned long addr, size_t orig_size)
+{
+	void *object;
+	bool init = false;
+
+	s = slab_pre_alloc_hook(s, gfpflags);
+	if (unlikely(!s))
+		return NULL;
+
+	object = kfence_alloc(s, orig_size, gfpflags);
+	if (unlikely(object))
 		goto out;
 
-	object = __slab_alloc_node(s, gfpflags, node, addr, orig_size);
+	if (s->cpu_sheaves && node == NUMA_NO_NODE)
+		object = alloc_from_pcs(s, gfpflags);
+
+	if (!object)
+		object = __slab_alloc_node(s, gfpflags, node, addr, orig_size);
 
 	maybe_wipe_obj_freeptr(s, object);
 	init = slab_want_init_on_alloc(gfpflags, s);
@@ -4591,6 +5212,288 @@ static void __slab_free(struct kmem_cache *s, struct slab *slab,
 	discard_slab(s, slab);
 }
 
+/*
+ * pcs is locked. We should have get rid of the spare sheaf and obtained an
+ * empty sheaf, while the main sheaf is full. We want to install the empty sheaf
+ * as a main sheaf, and make the current main sheaf a spare sheaf.
+ *
+ * However due to having relinquished the cpu_sheaves lock when obtaining
+ * the empty sheaf, we need to handle some unlikely but possible cases.
+ *
+ * If we put any sheaf to barn here, it's because we were interrupted or have
+ * been migrated to a different cpu, which should be rare enough so just ignore
+ * the barn's limits to simplify the handling.
+ *
+ * An alternative scenario that gets us here is when we fail
+ * barn_replace_full_sheaf(), because there's no empty sheaf available in the
+ * barn, so we had to allocate it by alloc_empty_sheaf(). But because we saw the
+ * limit on full sheaves was not exceeded, we assume it didn't change and just
+ * put the full sheaf there.
+ */
+static void __pcs_install_empty_sheaf(struct kmem_cache *s,
+		struct slub_percpu_sheaves *pcs, struct slab_sheaf *empty)
+{
+	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
+
+	/* This is what we expect to find if nobody interrupted us. */
+	if (likely(!pcs->spare)) {
+		pcs->spare = pcs->main;
+		pcs->main = empty;
+		return;
+	}
+
+	/*
+	 * Unlikely because if the main sheaf had space, we would have just
+	 * freed to it. Get rid of our empty sheaf.
+	 */
+	if (pcs->main->size < s->sheaf_capacity) {
+		barn_put_empty_sheaf(pcs->barn, empty);
+		return;
+	}
+
+	/* Also unlikely for the same reason */
+	if (pcs->spare->size < s->sheaf_capacity) {
+		swap(pcs->main, pcs->spare);
+		barn_put_empty_sheaf(pcs->barn, empty);
+		return;
+	}
+
+	/*
+	 * We probably failed barn_replace_full_sheaf() due to no empty sheaf
+	 * available there, but we allocated one, so finish the job.
+	 */
+	barn_put_full_sheaf(pcs->barn, pcs->main);
+	stat(s, BARN_PUT);
+	pcs->main = empty;
+}
+
+/*
+ * Replace the full main sheaf with a (at least partially) empty sheaf.
+ *
+ * Must be called with the cpu_sheaves local lock locked. If successful, returns
+ * the pcs pointer and the local lock locked (possibly on a different cpu than
+ * initially called). If not successful, returns NULL and the local lock
+ * unlocked.
+ */
+static struct slub_percpu_sheaves *
+__pcs_replace_full_main(struct kmem_cache *s, struct slub_percpu_sheaves *pcs)
+{
+	struct slab_sheaf *empty;
+	bool put_fail;
+
+restart:
+	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
+
+	put_fail = false;
+
+	if (!pcs->spare) {
+		empty = barn_get_empty_sheaf(pcs->barn);
+		if (empty) {
+			pcs->spare = pcs->main;
+			pcs->main = empty;
+			return pcs;
+		}
+		goto alloc_empty;
+	}
+
+	if (pcs->spare->size < s->sheaf_capacity) {
+		swap(pcs->main, pcs->spare);
+		return pcs;
+	}
+
+	empty = barn_replace_full_sheaf(pcs->barn, pcs->main);
+
+	if (!IS_ERR(empty)) {
+		stat(s, BARN_PUT);
+		pcs->main = empty;
+		return pcs;
+	}
+
+	if (PTR_ERR(empty) == -E2BIG) {
+		/* Since we got here, spare exists and is full */
+		struct slab_sheaf *to_flush = pcs->spare;
+
+		stat(s, BARN_PUT_FAIL);
+
+		pcs->spare = NULL;
+		local_unlock(&s->cpu_sheaves->lock);
+
+		sheaf_flush_unused(s, to_flush);
+		empty = to_flush;
+		goto got_empty;
+	}
+
+	/*
+	 * We could not replace full sheaf because barn had no empty
+	 * sheaves. We can still allocate it and put the full sheaf in
+	 * __pcs_install_empty_sheaf(), but if we fail to allocate it,
+	 * make sure to count the fail.
+	 */
+	put_fail = true;
+
+alloc_empty:
+	local_unlock(&s->cpu_sheaves->lock);
+
+	empty = alloc_empty_sheaf(s, GFP_NOWAIT);
+	if (empty)
+		goto got_empty;
+
+	if (put_fail)
+		 stat(s, BARN_PUT_FAIL);
+
+	if (!sheaf_flush_main(s))
+		return NULL;
+
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		return NULL;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	/*
+	 * we flushed the main sheaf so it should be empty now,
+	 * but in case we got preempted or migrated, we need to
+	 * check again
+	 */
+	if (pcs->main->size == s->sheaf_capacity)
+		goto restart;
+
+	return pcs;
+
+got_empty:
+	if (!local_trylock(&s->cpu_sheaves->lock)) {
+		barn_put_empty_sheaf(pcs->barn, empty);
+		return NULL;
+	}
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+	__pcs_install_empty_sheaf(s, pcs, empty);
+
+	return pcs;
+}
+
+/*
+ * Free an object to the percpu sheaves.
+ * The object is expected to have passed slab_free_hook() already.
+ */
+static __fastpath_inline
+bool free_to_pcs(struct kmem_cache *s, void *object)
+{
+	struct slub_percpu_sheaves *pcs;
+
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		return false;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (unlikely(pcs->main->size == s->sheaf_capacity)) {
+
+		pcs = __pcs_replace_full_main(s, pcs);
+		if (unlikely(!pcs))
+			return false;
+	}
+
+	pcs->main->objects[pcs->main->size++] = object;
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	stat(s, FREE_PCS);
+
+	return true;
+}
+
+/*
+ * Bulk free objects to the percpu sheaves.
+ * Unlike free_to_pcs() this includes the calls to all necessary hooks
+ * and the fallback to freeing to slab pages.
+ */
+static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct slab_sheaf *main, *empty;
+	unsigned int batch, i = 0;
+	bool init;
+
+	init = slab_want_init_on_free(s);
+
+	while (i < size) {
+		struct slab *slab = virt_to_slab(p[i]);
+
+		memcg_slab_free_hook(s, slab, p + i, 1);
+		alloc_tagging_slab_free_hook(s, slab, p + i, 1);
+
+		if (unlikely(!slab_free_hook(s, p[i], init, false))) {
+			p[i] = p[--size];
+			if (!size)
+				return;
+			continue;
+		}
+
+		i++;
+	}
+
+next_batch:
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		goto fallback;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (likely(pcs->main->size < s->sheaf_capacity))
+		goto do_free;
+
+	if (!pcs->spare) {
+		empty = barn_get_empty_sheaf(pcs->barn);
+		if (!empty)
+			goto no_empty;
+
+		pcs->spare = pcs->main;
+		pcs->main = empty;
+		goto do_free;
+	}
+
+	if (pcs->spare->size < s->sheaf_capacity) {
+		swap(pcs->main, pcs->spare);
+		goto do_free;
+	}
+
+	empty = barn_replace_full_sheaf(pcs->barn, pcs->main);
+	if (IS_ERR(empty)) {
+		stat(s, BARN_PUT_FAIL);
+		goto no_empty;
+	}
+
+	stat(s, BARN_PUT);
+	pcs->main = empty;
+
+do_free:
+	main = pcs->main;
+	batch = min(size, s->sheaf_capacity - main->size);
+
+	memcpy(main->objects + main->size, p, batch * sizeof(void *));
+	main->size += batch;
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	stat_add(s, FREE_PCS, batch);
+
+	if (batch < size) {
+		p += batch;
+		size -= batch;
+		goto next_batch;
+	}
+
+	return;
+
+no_empty:
+	local_unlock(&s->cpu_sheaves->lock);
+
+	/*
+	 * if we depleted all empty sheaves in the barn or there are too
+	 * many full sheaves, free the rest to slab pages
+	 */
+fallback:
+	__kmem_cache_free_bulk(s, size, p);
+}
+
 #ifndef CONFIG_SLUB_TINY
 /*
  * Fastpath with forced inlining to produce a kfree and kmem_cache_free that
@@ -4677,7 +5580,10 @@ void slab_free(struct kmem_cache *s, struct slab *slab, void *object,
 	memcg_slab_free_hook(s, slab, &object, 1);
 	alloc_tagging_slab_free_hook(s, slab, &object, 1);
 
-	if (likely(slab_free_hook(s, object, slab_want_init_on_free(s), false)))
+	if (unlikely(!slab_free_hook(s, object, slab_want_init_on_free(s), false)))
+		return;
+
+	if (!s->cpu_sheaves || !free_to_pcs(s, object))
 		do_slab_free(s, slab, object, object, 1, addr);
 }
 
@@ -5273,6 +6179,15 @@ void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p)
 	if (!size)
 		return;
 
+	/*
+	 * freeing to sheaves is so incompatible with the detached freelist so
+	 * once we go that way, we have to do everything differently
+	 */
+	if (s && s->cpu_sheaves) {
+		free_to_pcs_bulk(s, size, p);
+		return;
+	}
+
 	do {
 		struct detached_freelist df;
 
@@ -5391,7 +6306,7 @@ static int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags,
 int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
 				 void **p)
 {
-	int i;
+	unsigned int i = 0;
 
 	if (!size)
 		return 0;
@@ -5400,9 +6315,20 @@ int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
 	if (unlikely(!s))
 		return 0;
 
-	i = __kmem_cache_alloc_bulk(s, flags, size, p);
-	if (unlikely(i == 0))
-		return 0;
+	if (s->cpu_sheaves)
+		i = alloc_from_pcs_bulk(s, size, p);
+
+	if (i < size) {
+		/*
+		 * If we ran out of memory, don't bother with freeing back to
+		 * the percpu sheaves, we have bigger problems.
+		 */
+		if (unlikely(__kmem_cache_alloc_bulk(s, flags, size - i, p + i) == 0)) {
+			if (i > 0)
+				__kmem_cache_free_bulk(s, i, p);
+			return 0;
+		}
+	}
 
 	/*
 	 * memcg and kmem_cache debug support and memory initialization.
@@ -5412,11 +6338,11 @@ int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
 		    slab_want_init_on_alloc(flags, s), s->object_size))) {
 		return 0;
 	}
-	return i;
+
+	return size;
 }
 EXPORT_SYMBOL(kmem_cache_alloc_bulk_noprof);
 
-
 /*
  * Object placement in a slab is made very easy because we always start at
  * offset 0. If we tune the size of the object to the alignment then we can
@@ -5550,7 +6476,7 @@ static inline int calculate_order(unsigned int size)
 }
 
 static void
-init_kmem_cache_node(struct kmem_cache_node *n)
+init_kmem_cache_node(struct kmem_cache_node *n, struct node_barn *barn)
 {
 	n->nr_partial = 0;
 	spin_lock_init(&n->list_lock);
@@ -5560,6 +6486,9 @@ init_kmem_cache_node(struct kmem_cache_node *n)
 	atomic_long_set(&n->total_objects, 0);
 	INIT_LIST_HEAD(&n->full);
 #endif
+	n->barn = barn;
+	if (barn)
+		barn_init(barn);
 }
 
 #ifndef CONFIG_SLUB_TINY
@@ -5590,6 +6519,30 @@ static inline int alloc_kmem_cache_cpus(struct kmem_cache *s)
 }
 #endif /* CONFIG_SLUB_TINY */
 
+static int init_percpu_sheaves(struct kmem_cache *s)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct slub_percpu_sheaves *pcs;
+		int nid;
+
+		pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
+
+		local_trylock_init(&pcs->lock);
+
+		nid = cpu_to_mem(cpu);
+
+		pcs->barn = get_node(s, nid)->barn;
+		pcs->main = alloc_empty_sheaf(s, GFP_KERNEL);
+
+		if (!pcs->main)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
 static struct kmem_cache *kmem_cache_node;
 
 /*
@@ -5625,7 +6578,7 @@ static void early_kmem_cache_node_alloc(int node)
 	slab->freelist = get_freepointer(kmem_cache_node, n);
 	slab->inuse = 1;
 	kmem_cache_node->node[node] = n;
-	init_kmem_cache_node(n);
+	init_kmem_cache_node(n, NULL);
 	inc_slabs_node(kmem_cache_node, node, slab->objects);
 
 	/*
@@ -5641,6 +6594,13 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
 	struct kmem_cache_node *n;
 
 	for_each_kmem_cache_node(s, node, n) {
+		if (n->barn) {
+			WARN_ON(n->barn->nr_full);
+			WARN_ON(n->barn->nr_empty);
+			kfree(n->barn);
+			n->barn = NULL;
+		}
+
 		s->node[node] = NULL;
 		kmem_cache_free(kmem_cache_node, n);
 	}
@@ -5649,6 +6609,8 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
 void __kmem_cache_release(struct kmem_cache *s)
 {
 	cache_random_seq_destroy(s);
+	if (s->cpu_sheaves)
+		pcs_destroy(s);
 #ifndef CONFIG_SLUB_TINY
 	free_percpu(s->cpu_slab);
 #endif
@@ -5661,18 +6623,29 @@ static int init_kmem_cache_nodes(struct kmem_cache *s)
 
 	for_each_node_mask(node, slab_nodes) {
 		struct kmem_cache_node *n;
+		struct node_barn *barn = NULL;
 
 		if (slab_state == DOWN) {
 			early_kmem_cache_node_alloc(node);
 			continue;
 		}
+
+		if (s->cpu_sheaves) {
+			barn = kmalloc_node(sizeof(*barn), GFP_KERNEL, node);
+
+			if (!barn)
+				return 0;
+		}
+
 		n = kmem_cache_alloc_node(kmem_cache_node,
 						GFP_KERNEL, node);
-
-		if (!n)
+		if (!n) {
+			kfree(barn);
 			return 0;
+		}
+
+		init_kmem_cache_node(n, barn);
 
-		init_kmem_cache_node(n);
 		s->node[node] = n;
 	}
 	return 1;
@@ -5929,6 +6902,8 @@ int __kmem_cache_shutdown(struct kmem_cache *s)
 	flush_all_cpus_locked(s);
 	/* Attempt to free all objects */
 	for_each_kmem_cache_node(s, node, n) {
+		if (n->barn)
+			barn_shrink(s, n->barn);
 		free_partial(s, n);
 		if (n->nr_partial || node_nr_slabs(n))
 			return 1;
@@ -6132,6 +7107,9 @@ static int __kmem_cache_do_shrink(struct kmem_cache *s)
 		for (i = 0; i < SHRINK_PROMOTE_MAX; i++)
 			INIT_LIST_HEAD(promote + i);
 
+		if (n->barn)
+			barn_shrink(s, n->barn);
+
 		spin_lock_irqsave(&n->list_lock, flags);
 
 		/*
@@ -6211,12 +7189,24 @@ static int slab_mem_going_online_callback(int nid)
 	 */
 	mutex_lock(&slab_mutex);
 	list_for_each_entry(s, &slab_caches, list) {
+		struct node_barn *barn = NULL;
+
 		/*
 		 * The structure may already exist if the node was previously
 		 * onlined and offlined.
 		 */
 		if (get_node(s, nid))
 			continue;
+
+		if (s->cpu_sheaves) {
+			barn = kmalloc_node(sizeof(*barn), GFP_KERNEL, nid);
+
+			if (!barn) {
+				ret = -ENOMEM;
+				goto out;
+			}
+		}
+
 		/*
 		 * XXX: kmem_cache_alloc_node will fallback to other nodes
 		 *      since memory is not yet available from the node that
@@ -6224,10 +7214,13 @@ static int slab_mem_going_online_callback(int nid)
 		 */
 		n = kmem_cache_alloc(kmem_cache_node, GFP_KERNEL);
 		if (!n) {
+			kfree(barn);
 			ret = -ENOMEM;
 			goto out;
 		}
-		init_kmem_cache_node(n);
+
+		init_kmem_cache_node(n, barn);
+
 		s->node[nid] = n;
 	}
 	/*
@@ -6440,6 +7433,17 @@ int do_kmem_cache_create(struct kmem_cache *s, const char *name,
 
 	set_cpu_partial(s);
 
+	if (args->sheaf_capacity && !IS_ENABLED(CONFIG_SLUB_TINY)
+					&& !(s->flags & SLAB_DEBUG_FLAGS)) {
+		s->cpu_sheaves = alloc_percpu(struct slub_percpu_sheaves);
+		if (!s->cpu_sheaves) {
+			err = -ENOMEM;
+			goto out;
+		}
+		// TODO: increase capacity to grow slab_sheaf up to next kmalloc size?
+		s->sheaf_capacity = args->sheaf_capacity;
+	}
+
 #ifdef CONFIG_NUMA
 	s->remote_node_defrag_ratio = 1000;
 #endif
@@ -6456,6 +7460,12 @@ int do_kmem_cache_create(struct kmem_cache *s, const char *name,
 	if (!alloc_kmem_cache_cpus(s))
 		goto out;
 
+	if (s->cpu_sheaves) {
+		err = init_percpu_sheaves(s);
+		if (err)
+			goto out;
+	}
+
 	err = 0;
 
 	/* Mutex is not taken during early boot */
@@ -6908,6 +7918,12 @@ static ssize_t order_show(struct kmem_cache *s, char *buf)
 }
 SLAB_ATTR_RO(order);
 
+static ssize_t sheaf_capacity_show(struct kmem_cache *s, char *buf)
+{
+	return sysfs_emit(buf, "%u\n", s->sheaf_capacity);
+}
+SLAB_ATTR_RO(sheaf_capacity);
+
 static ssize_t min_partial_show(struct kmem_cache *s, char *buf)
 {
 	return sysfs_emit(buf, "%lu\n", s->min_partial);
@@ -7255,8 +8271,10 @@ static ssize_t text##_store(struct kmem_cache *s,		\
 }								\
 SLAB_ATTR(text);						\
 
+STAT_ATTR(ALLOC_PCS, alloc_cpu_sheaf);
 STAT_ATTR(ALLOC_FASTPATH, alloc_fastpath);
 STAT_ATTR(ALLOC_SLOWPATH, alloc_slowpath);
+STAT_ATTR(FREE_PCS, free_cpu_sheaf);
 STAT_ATTR(FREE_FASTPATH, free_fastpath);
 STAT_ATTR(FREE_SLOWPATH, free_slowpath);
 STAT_ATTR(FREE_FROZEN, free_frozen);
@@ -7281,6 +8299,14 @@ STAT_ATTR(CPU_PARTIAL_ALLOC, cpu_partial_alloc);
 STAT_ATTR(CPU_PARTIAL_FREE, cpu_partial_free);
 STAT_ATTR(CPU_PARTIAL_NODE, cpu_partial_node);
 STAT_ATTR(CPU_PARTIAL_DRAIN, cpu_partial_drain);
+STAT_ATTR(SHEAF_FLUSH, sheaf_flush);
+STAT_ATTR(SHEAF_REFILL, sheaf_refill);
+STAT_ATTR(SHEAF_ALLOC, sheaf_alloc);
+STAT_ATTR(SHEAF_FREE, sheaf_free);
+STAT_ATTR(BARN_GET, barn_get);
+STAT_ATTR(BARN_GET_FAIL, barn_get_fail);
+STAT_ATTR(BARN_PUT, barn_put);
+STAT_ATTR(BARN_PUT_FAIL, barn_put_fail);
 #endif	/* CONFIG_SLUB_STATS */
 
 #ifdef CONFIG_KFENCE
@@ -7311,6 +8337,7 @@ static struct attribute *slab_attrs[] = {
 	&object_size_attr.attr,
 	&objs_per_slab_attr.attr,
 	&order_attr.attr,
+	&sheaf_capacity_attr.attr,
 	&min_partial_attr.attr,
 	&cpu_partial_attr.attr,
 	&objects_partial_attr.attr,
@@ -7342,8 +8369,10 @@ static struct attribute *slab_attrs[] = {
 	&remote_node_defrag_ratio_attr.attr,
 #endif
 #ifdef CONFIG_SLUB_STATS
+	&alloc_cpu_sheaf_attr.attr,
 	&alloc_fastpath_attr.attr,
 	&alloc_slowpath_attr.attr,
+	&free_cpu_sheaf_attr.attr,
 	&free_fastpath_attr.attr,
 	&free_slowpath_attr.attr,
 	&free_frozen_attr.attr,
@@ -7368,6 +8397,14 @@ static struct attribute *slab_attrs[] = {
 	&cpu_partial_free_attr.attr,
 	&cpu_partial_node_attr.attr,
 	&cpu_partial_drain_attr.attr,
+	&sheaf_flush_attr.attr,
+	&sheaf_refill_attr.attr,
+	&sheaf_alloc_attr.attr,
+	&sheaf_free_attr.attr,
+	&barn_get_attr.attr,
+	&barn_get_fail_attr.attr,
+	&barn_put_attr.attr,
+	&barn_put_fail_attr.attr,
 #endif
 #ifdef CONFIG_FAILSLAB
 	&failslab_attr.attr,

-- 
2.51.0

[PATCH v6 03/10] slab: add sheaf support for batching kfree_rcu() operations

[Vlastimil Babka]

Extend the sheaf infrastructure for more efficient kfree_rcu() handling.
For caches with sheaves, on each cpu maintain a rcu_free sheaf in
addition to main and spare sheaves.

kfree_rcu() operations will try to put objects on this sheaf. Once full,
the sheaf is detached and submitted to call_rcu() with a handler that
will try to put it in the barn, or flush to slab pages using bulk free,
when the barn is full. Then a new empty sheaf must be obtained to put
more objects there.

It's possible that no free sheaves are available to use for a new
rcu_free sheaf, and the allocation in kfree_rcu() context can only use
GFP_NOWAIT and thus may fail. In that case, fall back to the existing
kfree_rcu() implementation.

Expected advantages:
- batching the kfree_rcu() operations, that could eventually replace the
  existing batching
- sheaves can be reused for allocations via barn instead of being
  flushed to slabs, which is more efficient
  - this includes cases where only some cpus are allowed to process rcu
    callbacks (Android)

Possible disadvantage:
- objects might be waiting for more than their grace period (it is
  determined by the last object freed into the sheaf), increasing memory
  usage - but the existing batching does that too.

Only implement this for CONFIG_KVFREE_RCU_BATCHED as the tiny
implementation favors smaller memory footprint over performance.

Add CONFIG_SLUB_STATS counters free_rcu_sheaf and free_rcu_sheaf_fail to
count how many kfree_rcu() used the rcu_free sheaf successfully and how
many had to fall back to the existing implementation.

Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/slab.h        |   2 +
 mm/slab_common.c |  24 +++++++
 mm/slub.c        | 193 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 214 insertions(+), 5 deletions(-)

diff --git a/mm/slab.h b/mm/slab.h
index 206987ce44a4d053ebe3b5e50784d2dd23822cd1..f1866f2d9b211bb0d7f24644b80ef4b50a7c3d24 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -435,6 +435,8 @@ static inline bool is_kmalloc_normal(struct kmem_cache *s)
 	return !(s->flags & (SLAB_CACHE_DMA|SLAB_ACCOUNT|SLAB_RECLAIM_ACCOUNT));
 }
 
+bool __kfree_rcu_sheaf(struct kmem_cache *s, void *obj);
+
 #define SLAB_CORE_FLAGS (SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA | \
 			 SLAB_CACHE_DMA32 | SLAB_PANIC | \
 			 SLAB_TYPESAFE_BY_RCU | SLAB_DEBUG_OBJECTS | \
diff --git a/mm/slab_common.c b/mm/slab_common.c
index e2b197e47866c30acdbd1fee4159f262a751c5a7..2d806e02568532a1000fd3912db6978e945dcfa8 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1608,6 +1608,27 @@ static void kfree_rcu_work(struct work_struct *work)
 		kvfree_rcu_list(head);
 }
 
+static bool kfree_rcu_sheaf(void *obj)
+{
+	struct kmem_cache *s;
+	struct folio *folio;
+	struct slab *slab;
+
+	if (is_vmalloc_addr(obj))
+		return false;
+
+	folio = virt_to_folio(obj);
+	if (unlikely(!folio_test_slab(folio)))
+		return false;
+
+	slab = folio_slab(folio);
+	s = slab->slab_cache;
+	if (s->cpu_sheaves)
+		return __kfree_rcu_sheaf(s, obj);
+
+	return false;
+}
+
 static bool
 need_offload_krc(struct kfree_rcu_cpu *krcp)
 {
@@ -1952,6 +1973,9 @@ void kvfree_call_rcu(struct rcu_head *head, void *ptr)
 	if (!head)
 		might_sleep();
 
+	if (kfree_rcu_sheaf(ptr))
+		return;
+
 	// Queue the object but don't yet schedule the batch.
 	if (debug_rcu_head_queue(ptr)) {
 		// Probable double kfree_rcu(), just leak.
diff --git a/mm/slub.c b/mm/slub.c
index 0822a817c28c2c4666e853ef0f433842c64f607a..7492076cf8c388793c09a64496a3b8850ef0d8ec 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -367,6 +367,8 @@ enum stat_item {
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
 	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
 	FREE_PCS,		/* Free to percpu sheaf */
+	FREE_RCU_SHEAF,		/* Free to rcu_free sheaf */
+	FREE_RCU_SHEAF_FAIL,	/* Failed to free to a rcu_free sheaf */
 	FREE_FASTPATH,		/* Free to cpu slab */
 	FREE_SLOWPATH,		/* Freeing not to cpu slab */
 	FREE_FROZEN,		/* Freeing to frozen slab */
@@ -461,6 +463,7 @@ struct slab_sheaf {
 		struct rcu_head rcu_head;
 		struct list_head barn_list;
 	};
+	struct kmem_cache *cache;
 	unsigned int size;
 	void *objects[];
 };
@@ -469,6 +472,7 @@ struct slub_percpu_sheaves {
 	local_trylock_t lock;
 	struct slab_sheaf *main; /* never NULL when unlocked */
 	struct slab_sheaf *spare; /* empty or full, may be NULL */
+	struct slab_sheaf *rcu_free; /* for batching kfree_rcu() */
 	struct node_barn *barn;
 };
 
@@ -2526,6 +2530,8 @@ static struct slab_sheaf *alloc_empty_sheaf(struct kmem_cache *s, gfp_t gfp)
 	if (unlikely(!sheaf))
 		return NULL;
 
+	sheaf->cache = s;
+
 	stat(s, SHEAF_ALLOC);
 
 	return sheaf;
@@ -2650,6 +2656,43 @@ static void sheaf_flush_unused(struct kmem_cache *s, struct slab_sheaf *sheaf)
 	sheaf->size = 0;
 }
 
+static void __rcu_free_sheaf_prepare(struct kmem_cache *s,
+				     struct slab_sheaf *sheaf)
+{
+	bool init = slab_want_init_on_free(s);
+	void **p = &sheaf->objects[0];
+	unsigned int i = 0;
+
+	while (i < sheaf->size) {
+		struct slab *slab = virt_to_slab(p[i]);
+
+		memcg_slab_free_hook(s, slab, p + i, 1);
+		alloc_tagging_slab_free_hook(s, slab, p + i, 1);
+
+		if (unlikely(!slab_free_hook(s, p[i], init, true))) {
+			p[i] = p[--sheaf->size];
+			continue;
+		}
+
+		i++;
+	}
+}
+
+static void rcu_free_sheaf_nobarn(struct rcu_head *head)
+{
+	struct slab_sheaf *sheaf;
+	struct kmem_cache *s;
+
+	sheaf = container_of(head, struct slab_sheaf, rcu_head);
+	s = sheaf->cache;
+
+	__rcu_free_sheaf_prepare(s, sheaf);
+
+	sheaf_flush_unused(s, sheaf);
+
+	free_empty_sheaf(s, sheaf);
+}
+
 /*
  * Caller needs to make sure migration is disabled in order to fully flush
  * single cpu's sheaves
@@ -2662,7 +2705,7 @@ static void sheaf_flush_unused(struct kmem_cache *s, struct slab_sheaf *sheaf)
 static void pcs_flush_all(struct kmem_cache *s)
 {
 	struct slub_percpu_sheaves *pcs;
-	struct slab_sheaf *spare;
+	struct slab_sheaf *spare, *rcu_free;
 
 	local_lock(&s->cpu_sheaves->lock);
 	pcs = this_cpu_ptr(s->cpu_sheaves);
@@ -2670,6 +2713,9 @@ static void pcs_flush_all(struct kmem_cache *s)
 	spare = pcs->spare;
 	pcs->spare = NULL;
 
+	rcu_free = pcs->rcu_free;
+	pcs->rcu_free = NULL;
+
 	local_unlock(&s->cpu_sheaves->lock);
 
 	if (spare) {
@@ -2677,6 +2723,9 @@ static void pcs_flush_all(struct kmem_cache *s)
 		free_empty_sheaf(s, spare);
 	}
 
+	if (rcu_free)
+		call_rcu(&rcu_free->rcu_head, rcu_free_sheaf_nobarn);
+
 	sheaf_flush_main(s);
 }
 
@@ -2693,6 +2742,11 @@ static void __pcs_flush_all_cpu(struct kmem_cache *s, unsigned int cpu)
 		free_empty_sheaf(s, pcs->spare);
 		pcs->spare = NULL;
 	}
+
+	if (pcs->rcu_free) {
+		call_rcu(&pcs->rcu_free->rcu_head, rcu_free_sheaf_nobarn);
+		pcs->rcu_free = NULL;
+	}
 }
 
 static void pcs_destroy(struct kmem_cache *s)
@@ -2718,6 +2772,7 @@ static void pcs_destroy(struct kmem_cache *s)
 		 */
 
 		WARN_ON(pcs->spare);
+		WARN_ON(pcs->rcu_free);
 
 		if (!WARN_ON(pcs->main->size)) {
 			free_empty_sheaf(s, pcs->main);
@@ -3775,7 +3830,7 @@ static bool has_pcs_used(int cpu, struct kmem_cache *s)
 
 	pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
 
-	return (pcs->spare || pcs->main->size);
+	return (pcs->spare || pcs->rcu_free || pcs->main->size);
 }
 
 static void pcs_flush_all(struct kmem_cache *s);
@@ -5401,6 +5456,127 @@ bool free_to_pcs(struct kmem_cache *s, void *object)
 	return true;
 }
 
+static void rcu_free_sheaf(struct rcu_head *head)
+{
+	struct slab_sheaf *sheaf;
+	struct node_barn *barn;
+	struct kmem_cache *s;
+
+	sheaf = container_of(head, struct slab_sheaf, rcu_head);
+
+	s = sheaf->cache;
+
+	/*
+	 * This may remove some objects due to slab_free_hook() returning false,
+	 * so that the sheaf might no longer be completely full. But it's easier
+	 * to handle it as full (unless it became completely empty), as the code
+	 * handles it fine. The only downside is that sheaf will serve fewer
+	 * allocations when reused. It only happens due to debugging, which is a
+	 * performance hit anyway.
+	 */
+	__rcu_free_sheaf_prepare(s, sheaf);
+
+	barn = get_node(s, numa_mem_id())->barn;
+
+	/* due to slab_free_hook() */
+	if (unlikely(sheaf->size == 0))
+		goto empty;
+
+	/*
+	 * Checking nr_full/nr_empty outside lock avoids contention in case the
+	 * barn is at the respective limit. Due to the race we might go over the
+	 * limit but that should be rare and harmless.
+	 */
+
+	if (data_race(barn->nr_full) < MAX_FULL_SHEAVES) {
+		stat(s, BARN_PUT);
+		barn_put_full_sheaf(barn, sheaf);
+		return;
+	}
+
+	stat(s, BARN_PUT_FAIL);
+	sheaf_flush_unused(s, sheaf);
+
+empty:
+	if (data_race(barn->nr_empty) < MAX_EMPTY_SHEAVES) {
+		barn_put_empty_sheaf(barn, sheaf);
+		return;
+	}
+
+	free_empty_sheaf(s, sheaf);
+}
+
+bool __kfree_rcu_sheaf(struct kmem_cache *s, void *obj)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct slab_sheaf *rcu_sheaf;
+
+	if (!local_trylock(&s->cpu_sheaves->lock))
+		goto fail;
+
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (unlikely(!pcs->rcu_free)) {
+
+		struct slab_sheaf *empty;
+
+		if (pcs->spare && pcs->spare->size == 0) {
+			pcs->rcu_free = pcs->spare;
+			pcs->spare = NULL;
+			goto do_free;
+		}
+
+		empty = barn_get_empty_sheaf(pcs->barn);
+
+		if (empty) {
+			pcs->rcu_free = empty;
+			goto do_free;
+		}
+
+		local_unlock(&s->cpu_sheaves->lock);
+
+		empty = alloc_empty_sheaf(s, GFP_NOWAIT);
+
+		if (!empty)
+			goto fail;
+
+		if (!local_trylock(&s->cpu_sheaves->lock)) {
+			barn_put_empty_sheaf(pcs->barn, empty);
+			goto fail;
+		}
+
+		pcs = this_cpu_ptr(s->cpu_sheaves);
+
+		if (unlikely(pcs->rcu_free))
+			barn_put_empty_sheaf(pcs->barn, empty);
+		else
+			pcs->rcu_free = empty;
+	}
+
+do_free:
+
+	rcu_sheaf = pcs->rcu_free;
+
+	rcu_sheaf->objects[rcu_sheaf->size++] = obj;
+
+	if (likely(rcu_sheaf->size < s->sheaf_capacity))
+		rcu_sheaf = NULL;
+	else
+		pcs->rcu_free = NULL;
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	if (rcu_sheaf)
+		call_rcu(&rcu_sheaf->rcu_head, rcu_free_sheaf);
+
+	stat(s, FREE_RCU_SHEAF);
+	return true;
+
+fail:
+	stat(s, FREE_RCU_SHEAF_FAIL);
+	return false;
+}
+
 /*
  * Bulk free objects to the percpu sheaves.
  * Unlike free_to_pcs() this includes the calls to all necessary hooks
@@ -5410,10 +5586,8 @@ static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
 {
 	struct slub_percpu_sheaves *pcs;
 	struct slab_sheaf *main, *empty;
+	bool init = slab_want_init_on_free(s);
 	unsigned int batch, i = 0;
-	bool init;
-
-	init = slab_want_init_on_free(s);
 
 	while (i < size) {
 		struct slab *slab = virt_to_slab(p[i]);
@@ -6900,6 +7074,11 @@ int __kmem_cache_shutdown(struct kmem_cache *s)
 	struct kmem_cache_node *n;
 
 	flush_all_cpus_locked(s);
+
+	/* we might have rcu sheaves in flight */
+	if (s->cpu_sheaves)
+		rcu_barrier();
+
 	/* Attempt to free all objects */
 	for_each_kmem_cache_node(s, node, n) {
 		if (n->barn)
@@ -8275,6 +8454,8 @@ STAT_ATTR(ALLOC_PCS, alloc_cpu_sheaf);
 STAT_ATTR(ALLOC_FASTPATH, alloc_fastpath);
 STAT_ATTR(ALLOC_SLOWPATH, alloc_slowpath);
 STAT_ATTR(FREE_PCS, free_cpu_sheaf);
+STAT_ATTR(FREE_RCU_SHEAF, free_rcu_sheaf);
+STAT_ATTR(FREE_RCU_SHEAF_FAIL, free_rcu_sheaf_fail);
 STAT_ATTR(FREE_FASTPATH, free_fastpath);
 STAT_ATTR(FREE_SLOWPATH, free_slowpath);
 STAT_ATTR(FREE_FROZEN, free_frozen);
@@ -8373,6 +8554,8 @@ static struct attribute *slab_attrs[] = {
 	&alloc_fastpath_attr.attr,
 	&alloc_slowpath_attr.attr,
 	&free_cpu_sheaf_attr.attr,
+	&free_rcu_sheaf_attr.attr,
+	&free_rcu_sheaf_fail_attr.attr,
 	&free_fastpath_attr.attr,
 	&free_slowpath_attr.attr,
 	&free_frozen_attr.attr,

-- 
2.51.0

[PATCH v6 04/10] slab: sheaf prefilling for guaranteed allocations

[Vlastimil Babka]

Add functions for efficient guaranteed allocations e.g. in a critical
section that cannot sleep, when the exact number of allocations is not
known beforehand, but an upper limit can be calculated.

kmem_cache_prefill_sheaf() returns a sheaf containing at least given
number of objects.

kmem_cache_alloc_from_sheaf() will allocate an object from the sheaf
and is guaranteed not to fail until depleted.

kmem_cache_return_sheaf() is for giving the sheaf back to the slab
allocator after the critical section. This will also attempt to refill
it to cache's sheaf capacity for better efficiency of sheaves handling,
but it's not stricly necessary to succeed.

kmem_cache_refill_sheaf() can be used to refill a previously obtained
sheaf to requested size. If the current size is sufficient, it does
nothing. If the requested size exceeds cache's sheaf_capacity and the
sheaf's current capacity, the sheaf will be replaced with a new one,
hence the indirect pointer parameter.

kmem_cache_sheaf_size() can be used to query the current size.

The implementation supports requesting sizes that exceed cache's
sheaf_capacity, but it is not efficient - such "oversize" sheaves are
allocated fresh in kmem_cache_prefill_sheaf() and flushed and freed
immediately by kmem_cache_return_sheaf(). kmem_cache_refill_sheaf()
might be especially ineffective when replacing a sheaf with a new one of
a larger capacity. It is therefore better to size cache's
sheaf_capacity accordingly to make oversize sheaves exceptional.

CONFIG_SLUB_STATS counters are added for sheaf prefill and return
operations. A prefill or return is considered _fast when it is able to
grab or return a percpu spare sheaf (even if the sheaf needs a refill to
satisfy the request, as those should amortize over time), and _slow
otherwise (when the barn or even sheaf allocation/freeing has to be
involved). sheaf_prefill_oversize is provided to determine how many
prefills were oversize (counter for oversize returns is not necessary as
all oversize refills result in oversize returns).

When slub_debug is enabled for a cache with sheaves, no percpu sheaves
exist for it, but the prefill functionality is still provided simply by
all prefilled sheaves becoming oversize. If percpu sheaves are not
created for a cache due to not passing the sheaf_capacity argument on
cache creation, the prefills also work through oversize sheaves, but
there's a WARN_ON_ONCE() to indicate the omission.

Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 include/linux/slab.h |  16 ++++
 mm/slub.c            | 265 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 281 insertions(+)

diff --git a/include/linux/slab.h b/include/linux/slab.h
index 49acbcdc6696fd120c402adf757b3f41660ad50a..680193356ac7a22f9df5cd9b71ff8b81e26404ad 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -829,6 +829,22 @@ void *kmem_cache_alloc_node_noprof(struct kmem_cache *s, gfp_t flags,
 				   int node) __assume_slab_alignment __malloc;
 #define kmem_cache_alloc_node(...)	alloc_hooks(kmem_cache_alloc_node_noprof(__VA_ARGS__))
 
+struct slab_sheaf *
+kmem_cache_prefill_sheaf(struct kmem_cache *s, gfp_t gfp, unsigned int size);
+
+int kmem_cache_refill_sheaf(struct kmem_cache *s, gfp_t gfp,
+		struct slab_sheaf **sheafp, unsigned int size);
+
+void kmem_cache_return_sheaf(struct kmem_cache *s, gfp_t gfp,
+				       struct slab_sheaf *sheaf);
+
+void *kmem_cache_alloc_from_sheaf_noprof(struct kmem_cache *cachep, gfp_t gfp,
+			struct slab_sheaf *sheaf) __assume_slab_alignment __malloc;
+#define kmem_cache_alloc_from_sheaf(...)	\
+			alloc_hooks(kmem_cache_alloc_from_sheaf_noprof(__VA_ARGS__))
+
+unsigned int kmem_cache_sheaf_size(struct slab_sheaf *sheaf);
+
 /*
  * These macros allow declaring a kmem_buckets * parameter alongside size, which
  * can be compiled out with CONFIG_SLAB_BUCKETS=n so that a large number of call
diff --git a/mm/slub.c b/mm/slub.c
index 7492076cf8c388793c09a64496a3b8850ef0d8ec..c8dda640f95e7e738cf2ceb05b98d1176df6e83f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -401,6 +401,11 @@ enum stat_item {
 	BARN_GET_FAIL,		/* Failed to get full sheaf from barn */
 	BARN_PUT,		/* Put full sheaf to barn */
 	BARN_PUT_FAIL,		/* Failed to put full sheaf to barn */
+	SHEAF_PREFILL_FAST,	/* Sheaf prefill grabbed the spare sheaf */
+	SHEAF_PREFILL_SLOW,	/* Sheaf prefill found no spare sheaf */
+	SHEAF_PREFILL_OVERSIZE,	/* Allocation of oversize sheaf for prefill */
+	SHEAF_RETURN_FAST,	/* Sheaf return reattached spare sheaf */
+	SHEAF_RETURN_SLOW,	/* Sheaf return could not reattach spare */
 	NR_SLUB_STAT_ITEMS
 };
 
@@ -462,6 +467,8 @@ struct slab_sheaf {
 	union {
 		struct rcu_head rcu_head;
 		struct list_head barn_list;
+		/* only used for prefilled sheafs */
+		unsigned int capacity;
 	};
 	struct kmem_cache *cache;
 	unsigned int size;
@@ -2833,6 +2840,30 @@ static void barn_put_full_sheaf(struct node_barn *barn, struct slab_sheaf *sheaf
 	spin_unlock_irqrestore(&barn->lock, flags);
 }
 
+static struct slab_sheaf *barn_get_full_or_empty_sheaf(struct node_barn *barn)
+{
+	struct slab_sheaf *sheaf = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&barn->lock, flags);
+
+	if (barn->nr_full) {
+		sheaf = list_first_entry(&barn->sheaves_full, struct slab_sheaf,
+					barn_list);
+		list_del(&sheaf->barn_list);
+		barn->nr_full--;
+	} else if (barn->nr_empty) {
+		sheaf = list_first_entry(&barn->sheaves_empty,
+					 struct slab_sheaf, barn_list);
+		list_del(&sheaf->barn_list);
+		barn->nr_empty--;
+	}
+
+	spin_unlock_irqrestore(&barn->lock, flags);
+
+	return sheaf;
+}
+
 /*
  * If a full sheaf is available, return it and put the supplied empty one to
  * barn. We ignore the limit on empty sheaves as the number of sheaves doesn't
@@ -4962,6 +4993,230 @@ void *kmem_cache_alloc_node_noprof(struct kmem_cache *s, gfp_t gfpflags, int nod
 }
 EXPORT_SYMBOL(kmem_cache_alloc_node_noprof);
 
+/*
+ * returns a sheaf that has at least the requested size
+ * when prefilling is needed, do so with given gfp flags
+ *
+ * return NULL if sheaf allocation or prefilling failed
+ */
+struct slab_sheaf *
+kmem_cache_prefill_sheaf(struct kmem_cache *s, gfp_t gfp, unsigned int size)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct slab_sheaf *sheaf = NULL;
+
+	if (unlikely(size > s->sheaf_capacity)) {
+
+		/*
+		 * slab_debug disables cpu sheaves intentionally so all
+		 * prefilled sheaves become "oversize" and we give up on
+		 * performance for the debugging. Same with SLUB_TINY.
+		 * Creating a cache without sheaves and then requesting a
+		 * prefilled sheaf is however not expected, so warn.
+		 */
+		WARN_ON_ONCE(s->sheaf_capacity == 0 &&
+			     !IS_ENABLED(CONFIG_SLUB_TINY) &&
+			     !(s->flags & SLAB_DEBUG_FLAGS));
+
+		sheaf = kzalloc(struct_size(sheaf, objects, size), gfp);
+		if (!sheaf)
+			return NULL;
+
+		stat(s, SHEAF_PREFILL_OVERSIZE);
+		sheaf->cache = s;
+		sheaf->capacity = size;
+
+		if (!__kmem_cache_alloc_bulk(s, gfp, size,
+					     &sheaf->objects[0])) {
+			kfree(sheaf);
+			return NULL;
+		}
+
+		sheaf->size = size;
+
+		return sheaf;
+	}
+
+	local_lock(&s->cpu_sheaves->lock);
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (pcs->spare) {
+		sheaf = pcs->spare;
+		pcs->spare = NULL;
+		stat(s, SHEAF_PREFILL_FAST);
+	} else {
+		stat(s, SHEAF_PREFILL_SLOW);
+		sheaf = barn_get_full_or_empty_sheaf(pcs->barn);
+		if (sheaf && sheaf->size)
+			stat(s, BARN_GET);
+		else
+			stat(s, BARN_GET_FAIL);
+	}
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+
+	if (!sheaf)
+		sheaf = alloc_empty_sheaf(s, gfp);
+
+	if (sheaf && sheaf->size < size) {
+		if (refill_sheaf(s, sheaf, gfp)) {
+			sheaf_flush_unused(s, sheaf);
+			free_empty_sheaf(s, sheaf);
+			sheaf = NULL;
+		}
+	}
+
+	if (sheaf)
+		sheaf->capacity = s->sheaf_capacity;
+
+	return sheaf;
+}
+
+/*
+ * Use this to return a sheaf obtained by kmem_cache_prefill_sheaf()
+ *
+ * If the sheaf cannot simply become the percpu spare sheaf, but there's space
+ * for a full sheaf in the barn, we try to refill the sheaf back to the cache's
+ * sheaf_capacity to avoid handling partially full sheaves.
+ *
+ * If the refill fails because gfp is e.g. GFP_NOWAIT, or the barn is full, the
+ * sheaf is instead flushed and freed.
+ */
+void kmem_cache_return_sheaf(struct kmem_cache *s, gfp_t gfp,
+			     struct slab_sheaf *sheaf)
+{
+	struct slub_percpu_sheaves *pcs;
+	struct node_barn *barn;
+
+	if (unlikely(sheaf->capacity != s->sheaf_capacity)) {
+		sheaf_flush_unused(s, sheaf);
+		kfree(sheaf);
+		return;
+	}
+
+	local_lock(&s->cpu_sheaves->lock);
+	pcs = this_cpu_ptr(s->cpu_sheaves);
+
+	if (!pcs->spare) {
+		pcs->spare = sheaf;
+		sheaf = NULL;
+		stat(s, SHEAF_RETURN_FAST);
+	}
+
+	local_unlock(&s->cpu_sheaves->lock);
+
+	if (!sheaf)
+		return;
+
+	stat(s, SHEAF_RETURN_SLOW);
+
+	/* Accessing pcs->barn outside local_lock is safe. */
+	barn = pcs->barn;
+
+	/*
+	 * If the barn has too many full sheaves or we fail to refill the sheaf,
+	 * simply flush and free it.
+	 */
+	if (data_race(pcs->barn->nr_full) >= MAX_FULL_SHEAVES ||
+	    refill_sheaf(s, sheaf, gfp)) {
+		sheaf_flush_unused(s, sheaf);
+		free_empty_sheaf(s, sheaf);
+		return;
+	}
+
+	barn_put_full_sheaf(barn, sheaf);
+	stat(s, BARN_PUT);
+}
+
+/*
+ * refill a sheaf previously returned by kmem_cache_prefill_sheaf to at least
+ * the given size
+ *
+ * the sheaf might be replaced by a new one when requesting more than
+ * s->sheaf_capacity objects if such replacement is necessary, but the refill
+ * fails (returning -ENOMEM), the existing sheaf is left intact
+ *
+ * In practice we always refill to full sheaf's capacity.
+ */
+int kmem_cache_refill_sheaf(struct kmem_cache *s, gfp_t gfp,
+			    struct slab_sheaf **sheafp, unsigned int size)
+{
+	struct slab_sheaf *sheaf;
+
+	/*
+	 * TODO: do we want to support *sheaf == NULL to be equivalent of
+	 * kmem_cache_prefill_sheaf() ?
+	 */
+	if (!sheafp || !(*sheafp))
+		return -EINVAL;
+
+	sheaf = *sheafp;
+	if (sheaf->size >= size)
+		return 0;
+
+	if (likely(sheaf->capacity >= size)) {
+		if (likely(sheaf->capacity == s->sheaf_capacity))
+			return refill_sheaf(s, sheaf, gfp);
+
+		if (!__kmem_cache_alloc_bulk(s, gfp, sheaf->capacity - sheaf->size,
+					     &sheaf->objects[sheaf->size])) {
+			return -ENOMEM;
+		}
+		sheaf->size = sheaf->capacity;
+
+		return 0;
+	}
+
+	/*
+	 * We had a regular sized sheaf and need an oversize one, or we had an
+	 * oversize one already but need a larger one now.
+	 * This should be a very rare path so let's not complicate it.
+	 */
+	sheaf = kmem_cache_prefill_sheaf(s, gfp, size);
+	if (!sheaf)
+		return -ENOMEM;
+
+	kmem_cache_return_sheaf(s, gfp, *sheafp);
+	*sheafp = sheaf;
+	return 0;
+}
+
+/*
+ * Allocate from a sheaf obtained by kmem_cache_prefill_sheaf()
+ *
+ * Guaranteed not to fail as many allocations as was the requested size.
+ * After the sheaf is emptied, it fails - no fallback to the slab cache itself.
+ *
+ * The gfp parameter is meant only to specify __GFP_ZERO or __GFP_ACCOUNT
+ * memcg charging is forced over limit if necessary, to avoid failure.
+ */
+void *
+kmem_cache_alloc_from_sheaf_noprof(struct kmem_cache *s, gfp_t gfp,
+				   struct slab_sheaf *sheaf)
+{
+	void *ret = NULL;
+	bool init;
+
+	if (sheaf->size == 0)
+		goto out;
+
+	ret = sheaf->objects[--sheaf->size];
+
+	init = slab_want_init_on_alloc(gfp, s);
+
+	/* add __GFP_NOFAIL to force successful memcg charging */
+	slab_post_alloc_hook(s, NULL, gfp | __GFP_NOFAIL, 1, &ret, init, s->object_size);
+out:
+	trace_kmem_cache_alloc(_RET_IP_, ret, s, gfp, NUMA_NO_NODE);
+
+	return ret;
+}
+
+unsigned int kmem_cache_sheaf_size(struct slab_sheaf *sheaf)
+{
+	return sheaf->size;
+}
 /*
  * To avoid unnecessary overhead, we pass through large allocation requests
  * directly to the page allocator. We use __GFP_COMP, because we will need to
@@ -8488,6 +8743,11 @@ STAT_ATTR(BARN_GET, barn_get);
 STAT_ATTR(BARN_GET_FAIL, barn_get_fail);
 STAT_ATTR(BARN_PUT, barn_put);
 STAT_ATTR(BARN_PUT_FAIL, barn_put_fail);
+STAT_ATTR(SHEAF_PREFILL_FAST, sheaf_prefill_fast);
+STAT_ATTR(SHEAF_PREFILL_SLOW, sheaf_prefill_slow);
+STAT_ATTR(SHEAF_PREFILL_OVERSIZE, sheaf_prefill_oversize);
+STAT_ATTR(SHEAF_RETURN_FAST, sheaf_return_fast);
+STAT_ATTR(SHEAF_RETURN_SLOW, sheaf_return_slow);
 #endif	/* CONFIG_SLUB_STATS */
 
 #ifdef CONFIG_KFENCE
@@ -8588,6 +8848,11 @@ static struct attribute *slab_attrs[] = {
 	&barn_get_fail_attr.attr,
 	&barn_put_attr.attr,
 	&barn_put_fail_attr.attr,
+	&sheaf_prefill_fast_attr.attr,
+	&sheaf_prefill_slow_attr.attr,
+	&sheaf_prefill_oversize_attr.attr,
+	&sheaf_return_fast_attr.attr,
+	&sheaf_return_slow_attr.attr,
 #endif
 #ifdef CONFIG_FAILSLAB
 	&failslab_attr.attr,

-- 
2.51.0

[PATCH v6 05/10] slab: determine barn status racily outside of lock

[Vlastimil Babka]

The possibility of many barn operations is determined by the current
number of full or empty sheaves. Taking the barn->lock just to find out
that e.g. there are no empty sheaves results in unnecessary overhead and
lock contention. Thus perform these checks outside of the lock with a
data_race() annotated variable read and fail quickly without taking the
lock.

Checks for sheaf availability that racily succeed have to be obviously
repeated under the lock for correctness, but we can skip repeating
checks if there are too many sheaves on the given list as the limits
don't need to be strict.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
---
 mm/slub.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index c8dda640f95e7e738cf2ceb05b98d1176df6e83f..ee3a222acd6b15389a71bb47429d22b5326a4624 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2796,9 +2796,12 @@ static struct slab_sheaf *barn_get_empty_sheaf(struct node_barn *barn)
 	struct slab_sheaf *empty = NULL;
 	unsigned long flags;
 
+	if (!data_race(barn->nr_empty))
+		return NULL;
+
 	spin_lock_irqsave(&barn->lock, flags);
 
-	if (barn->nr_empty) {
+	if (likely(barn->nr_empty)) {
 		empty = list_first_entry(&barn->sheaves_empty,
 					 struct slab_sheaf, barn_list);
 		list_del(&empty->barn_list);
@@ -2845,6 +2848,9 @@ static struct slab_sheaf *barn_get_full_or_empty_sheaf(struct node_barn *barn)
 	struct slab_sheaf *sheaf = NULL;
 	unsigned long flags;
 
+	if (!data_race(barn->nr_full) && !data_race(barn->nr_empty))
+		return NULL;
+
 	spin_lock_irqsave(&barn->lock, flags);
 
 	if (barn->nr_full) {
@@ -2875,9 +2881,12 @@ barn_replace_empty_sheaf(struct node_barn *barn, struct slab_sheaf *empty)
 	struct slab_sheaf *full = NULL;
 	unsigned long flags;
 
+	if (!data_race(barn->nr_full))
+		return NULL;
+
 	spin_lock_irqsave(&barn->lock, flags);
 
-	if (barn->nr_full) {
+	if (likely(barn->nr_full)) {
 		full = list_first_entry(&barn->sheaves_full, struct slab_sheaf,
 					barn_list);
 		list_del(&full->barn_list);
@@ -2901,19 +2910,23 @@ barn_replace_full_sheaf(struct node_barn *barn, struct slab_sheaf *full)
 	struct slab_sheaf *empty;
 	unsigned long flags;
 
+	/* we don't repeat this check under barn->lock as it's not critical */
+	if (data_race(barn->nr_full) >= MAX_FULL_SHEAVES)
+		return ERR_PTR(-E2BIG);
+	if (!data_race(barn->nr_empty))
+		return ERR_PTR(-ENOMEM);
+
 	spin_lock_irqsave(&barn->lock, flags);
 
-	if (barn->nr_full >= MAX_FULL_SHEAVES) {
-		empty = ERR_PTR(-E2BIG);
-	} else if (!barn->nr_empty) {
-		empty = ERR_PTR(-ENOMEM);
-	} else {
+	if (likely(barn->nr_empty)) {
 		empty = list_first_entry(&barn->sheaves_empty, struct slab_sheaf,
 					 barn_list);
 		list_del(&empty->barn_list);
 		list_add(&full->barn_list, &barn->sheaves_full);
 		barn->nr_empty--;
 		barn->nr_full++;
+	} else {
+		empty = ERR_PTR(-ENOMEM);
 	}
 
 	spin_unlock_irqrestore(&barn->lock, flags);

-- 
2.51.0

[PATCH v6 06/10] slab: skip percpu sheaves for remote object freeing

[Vlastimil Babka]

Since we don't control the NUMA locality of objects in percpu sheaves,
allocations with node restrictions bypass them. Allocations without
restrictions may however still expect to get local objects with high
probability, and the introduction of sheaves can decrease it due to
freed object from a remote node ending up in percpu sheaves.

The fraction of such remote frees seems low (5% on an 8-node machine)
but it can be expected that some cache or workload specific corner cases
exist. We can either conclude that this is not a problem due to the low
fraction, or we can make remote frees bypass percpu sheaves and go
directly to their slabs. This will make the remote frees more expensive,
but if if's only a small fraction, most frees will still benefit from
the lower overhead of percpu sheaves.

This patch thus makes remote object freeing bypass percpu sheaves,
including bulk freeing, and kfree_rcu() via the rcu_free sheaf. However
it's not intended to be 100% guarantee that percpu sheaves will only
contain local objects. The refill from slabs does not provide that
guarantee in the first place, and there might be cpu migrations
happening when we need to unlock the local_lock. Avoiding all that could
be possible but complicated so we can leave it for later investigation
whether it would be worth it. It can be expected that the more selective
freeing will itself prevent accumulation of remote objects in percpu
sheaves so any such violations would have only short-term effects.

Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/slab_common.c |  7 +++++--
 mm/slub.c        | 42 ++++++++++++++++++++++++++++++++++++------
 2 files changed, 41 insertions(+), 8 deletions(-)

diff --git a/mm/slab_common.c b/mm/slab_common.c
index 2d806e02568532a1000fd3912db6978e945dcfa8..08f5baee1309e5b5f10a22b8b3b0a09dfb314419 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1623,8 +1623,11 @@ static bool kfree_rcu_sheaf(void *obj)
 
 	slab = folio_slab(folio);
 	s = slab->slab_cache;
-	if (s->cpu_sheaves)
-		return __kfree_rcu_sheaf(s, obj);
+	if (s->cpu_sheaves) {
+		if (likely(!IS_ENABLED(CONFIG_NUMA) ||
+			   slab_nid(slab) == numa_mem_id()))
+			return __kfree_rcu_sheaf(s, obj);
+	}
 
 	return false;
 }
diff --git a/mm/slub.c b/mm/slub.c
index ee3a222acd6b15389a71bb47429d22b5326a4624..b37e684457e7d14781466c0086d1b64df2fd8e9d 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -472,6 +472,7 @@ struct slab_sheaf {
 	};
 	struct kmem_cache *cache;
 	unsigned int size;
+	int node; /* only used for rcu_sheaf */
 	void *objects[];
 };
 
@@ -5744,7 +5745,7 @@ static void rcu_free_sheaf(struct rcu_head *head)
 	 */
 	__rcu_free_sheaf_prepare(s, sheaf);
 
-	barn = get_node(s, numa_mem_id())->barn;
+	barn = get_node(s, sheaf->node)->barn;
 
 	/* due to slab_free_hook() */
 	if (unlikely(sheaf->size == 0))
@@ -5827,10 +5828,12 @@ bool __kfree_rcu_sheaf(struct kmem_cache *s, void *obj)
 
 	rcu_sheaf->objects[rcu_sheaf->size++] = obj;
 
-	if (likely(rcu_sheaf->size < s->sheaf_capacity))
+	if (likely(rcu_sheaf->size < s->sheaf_capacity)) {
 		rcu_sheaf = NULL;
-	else
+	} else {
 		pcs->rcu_free = NULL;
+		rcu_sheaf->node = numa_mem_id();
+	}
 
 	local_unlock(&s->cpu_sheaves->lock);
 
@@ -5856,7 +5859,11 @@ static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
 	struct slab_sheaf *main, *empty;
 	bool init = slab_want_init_on_free(s);
 	unsigned int batch, i = 0;
+	void *remote_objects[PCS_BATCH_MAX];
+	unsigned int remote_nr = 0;
+	int node = numa_mem_id();
 
+next_remote_batch:
 	while (i < size) {
 		struct slab *slab = virt_to_slab(p[i]);
 
@@ -5866,7 +5873,15 @@ static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
 		if (unlikely(!slab_free_hook(s, p[i], init, false))) {
 			p[i] = p[--size];
 			if (!size)
-				return;
+				goto flush_remote;
+			continue;
+		}
+
+		if (unlikely(IS_ENABLED(CONFIG_NUMA) && slab_nid(slab) != node)) {
+			remote_objects[remote_nr] = p[i];
+			p[i] = p[--size];
+			if (++remote_nr >= PCS_BATCH_MAX)
+				goto flush_remote;
 			continue;
 		}
 
@@ -5934,6 +5949,15 @@ static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
 	 */
 fallback:
 	__kmem_cache_free_bulk(s, size, p);
+
+flush_remote:
+	if (remote_nr) {
+		__kmem_cache_free_bulk(s, remote_nr, &remote_objects[0]);
+		if (i < size) {
+			remote_nr = 0;
+			goto next_remote_batch;
+		}
+	}
 }
 
 #ifndef CONFIG_SLUB_TINY
@@ -6025,8 +6049,14 @@ void slab_free(struct kmem_cache *s, struct slab *slab, void *object,
 	if (unlikely(!slab_free_hook(s, object, slab_want_init_on_free(s), false)))
 		return;
 
-	if (!s->cpu_sheaves || !free_to_pcs(s, object))
-		do_slab_free(s, slab, object, object, 1, addr);
+	if (s->cpu_sheaves && likely(!IS_ENABLED(CONFIG_NUMA) ||
+				     slab_nid(slab) == numa_mem_id())) {
+		if (likely(free_to_pcs(s, object))) {
+			return;
+		}
+	}
+
+	do_slab_free(s, slab, object, object, 1, addr);
 }
 
 #ifdef CONFIG_MEMCG

-- 
2.51.0

[PATCH v6 07/10] slab: allow NUMA restricted allocations to use percpu sheaves

[Vlastimil Babka]

Currently allocations asking for a specific node explicitly or via
mempolicy in strict_numa node bypass percpu sheaves. Since sheaves
contain mostly local objects, we can try allocating from them if the
local node happens to be the requested node or allowed by the mempolicy.
If we find the object from percpu sheaves is not from the expected node,
we skip the sheaves - this should be rare.

Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/slub.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 46 insertions(+), 7 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index b37e684457e7d14781466c0086d1b64df2fd8e9d..aeaffcbca49b3e50ef345c3a6f24d007b53ef24e 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4808,18 +4808,43 @@ __pcs_replace_empty_main(struct kmem_cache *s, struct slub_percpu_sheaves *pcs,
 }
 
 static __fastpath_inline
-void *alloc_from_pcs(struct kmem_cache *s, gfp_t gfp)
+void *alloc_from_pcs(struct kmem_cache *s, gfp_t gfp, int node)
 {
 	struct slub_percpu_sheaves *pcs;
+	bool node_requested;
 	void *object;
 
 #ifdef CONFIG_NUMA
-	if (static_branch_unlikely(&strict_numa)) {
-		if (current->mempolicy)
-			return NULL;
+	if (static_branch_unlikely(&strict_numa) &&
+			 node == NUMA_NO_NODE) {
+
+		struct mempolicy *mpol = current->mempolicy;
+
+		if (mpol) {
+			/*
+			 * Special BIND rule support. If the local node
+			 * is in permitted set then do not redirect
+			 * to a particular node.
+			 * Otherwise we apply the memory policy to get
+			 * the node we need to allocate on.
+			 */
+			if (mpol->mode != MPOL_BIND ||
+					!node_isset(numa_mem_id(), mpol->nodes))
+
+				node = mempolicy_slab_node();
+		}
 	}
 #endif
 
+	node_requested = IS_ENABLED(CONFIG_NUMA) && node != NUMA_NO_NODE;
+
+	/*
+	 * We assume the percpu sheaves contain only local objects although it's
+	 * not completely guaranteed, so we verify later.
+	 */
+	if (unlikely(node_requested && node != numa_mem_id()))
+		return NULL;
+
 	if (!local_trylock(&s->cpu_sheaves->lock))
 		return NULL;
 
@@ -4831,7 +4856,21 @@ void *alloc_from_pcs(struct kmem_cache *s, gfp_t gfp)
 			return NULL;
 	}
 
-	object = pcs->main->objects[--pcs->main->size];
+	object = pcs->main->objects[pcs->main->size - 1];
+
+	if (unlikely(node_requested)) {
+		/*
+		 * Verify that the object was from the node we want. This could
+		 * be false because of cpu migration during an unlocked part of
+		 * the current allocation or previous freeing process.
+		 */
+		if (folio_nid(virt_to_folio(object)) != node) {
+			local_unlock(&s->cpu_sheaves->lock);
+			return NULL;
+		}
+	}
+
+	pcs->main->size--;
 
 	local_unlock(&s->cpu_sheaves->lock);
 
@@ -4931,8 +4970,8 @@ static __fastpath_inline void *slab_alloc_node(struct kmem_cache *s, struct list
 	if (unlikely(object))
 		goto out;
 
-	if (s->cpu_sheaves && node == NUMA_NO_NODE)
-		object = alloc_from_pcs(s, gfpflags);
+	if (s->cpu_sheaves)
+		object = alloc_from_pcs(s, gfpflags, node);
 
 	if (!object)
 		object = __slab_alloc_node(s, gfpflags, node, addr, orig_size);

-- 
2.51.0

[PATCH v6 08/10] mm, vma: use percpu sheaves for vm_area_struct cache

[Vlastimil Babka]

Create the vm_area_struct cache with percpu sheaves of size 32 to
improve its performance.

Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/vma_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/vma_init.c b/mm/vma_init.c
index 8e53c7943561e7324e7992946b4065dec1149b82..52c6b55fac4519e0da39ca75ad018e14449d1d95 100644
--- a/mm/vma_init.c
+++ b/mm/vma_init.c
@@ -16,6 +16,7 @@ void __init vma_state_init(void)
 	struct kmem_cache_args args = {
 		.use_freeptr_offset = true,
 		.freeptr_offset = offsetof(struct vm_area_struct, vm_freeptr),
+		.sheaf_capacity = 32,
 	};
 
 	vm_area_cachep = kmem_cache_create("vm_area_struct",

-- 
2.51.0

[PATCH v6 09/10] tools/testing: Add testing support for slab caches with sheaves

[Vlastimil Babka]

From: "Liam R. Howlett" <Liam.Howlett@Oracle.com>

Make testing work for the slab changes that have come in with the
sheaves work. That means support kmem_cache_args with sheaf_capacity.

[vbabka@suse.cz: remove kfree_rcu() support, to be added later]
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 tools/include/linux/slab.h   | 41 ++++++++++++++++++++++++++++++++++++++---
 tools/testing/shared/linux.c | 12 ++++++++----
 2 files changed, 46 insertions(+), 7 deletions(-)

diff --git a/tools/include/linux/slab.h b/tools/include/linux/slab.h
index c87051e2b26f5a7fee0362697fae067076b8e84d..d1444e79f2685edb828adbce8b3fbb500c0f8844 100644
--- a/tools/include/linux/slab.h
+++ b/tools/include/linux/slab.h
@@ -23,6 +23,12 @@ enum slab_state {
 	FULL
 };
 
+struct kmem_cache_args {
+	unsigned int align;
+	unsigned int sheaf_capacity;
+	void (*ctor)(void *);
+};
+
 static inline void *kzalloc(size_t size, gfp_t gfp)
 {
 	return kmalloc(size, gfp | __GFP_ZERO);
@@ -37,9 +43,38 @@ static inline void *kmem_cache_alloc(struct kmem_cache *cachep, int flags)
 }
 void kmem_cache_free(struct kmem_cache *cachep, void *objp);
 
-struct kmem_cache *kmem_cache_create(const char *name, unsigned int size,
-			unsigned int align, unsigned int flags,
-			void (*ctor)(void *));
+
+struct kmem_cache *
+__kmem_cache_create_args(const char *name, unsigned int size,
+		struct kmem_cache_args *args, unsigned int flags);
+
+/* If NULL is passed for @args, use this variant with default arguments. */
+static inline struct kmem_cache *
+__kmem_cache_default_args(const char *name, unsigned int size,
+		struct kmem_cache_args *args, unsigned int flags)
+{
+	struct kmem_cache_args kmem_default_args = {};
+
+	return __kmem_cache_create_args(name, size, &kmem_default_args, flags);
+}
+
+static inline struct kmem_cache *
+__kmem_cache_create(const char *name, unsigned int size, unsigned int align,
+		unsigned int flags, void (*ctor)(void *))
+{
+	struct kmem_cache_args kmem_args = {
+		.align	= align,
+		.ctor	= ctor,
+	};
+
+	return __kmem_cache_create_args(name, size, &kmem_args, flags);
+}
+
+#define kmem_cache_create(__name, __object_size, __args, ...)           \
+	_Generic((__args),                                              \
+		struct kmem_cache_args *: __kmem_cache_create_args,	\
+		void *: __kmem_cache_default_args,			\
+		default: __kmem_cache_create)(__name, __object_size, __args, __VA_ARGS__)
 
 void kmem_cache_free_bulk(struct kmem_cache *cachep, size_t size, void **list);
 int kmem_cache_alloc_bulk(struct kmem_cache *cachep, gfp_t gfp, size_t size,
diff --git a/tools/testing/shared/linux.c b/tools/testing/shared/linux.c
index 0f97fb0d19e19c327aa4843a35b45cc086f4f366..04730abe4dffbd6849b848373ec110b87c81bf33 100644
--- a/tools/testing/shared/linux.c
+++ b/tools/testing/shared/linux.c
@@ -20,6 +20,7 @@ struct kmem_cache {
 	pthread_mutex_t lock;
 	unsigned int size;
 	unsigned int align;
+	unsigned int sheaf_capacity;
 	int nr_objs;
 	void *objs;
 	void (*ctor)(void *);
@@ -234,23 +235,26 @@ int kmem_cache_alloc_bulk(struct kmem_cache *cachep, gfp_t gfp, size_t size,
 }
 
 struct kmem_cache *
-kmem_cache_create(const char *name, unsigned int size, unsigned int align,
-		unsigned int flags, void (*ctor)(void *))
+__kmem_cache_create_args(const char *name, unsigned int size,
+			  struct kmem_cache_args *args,
+			  unsigned int flags)
 {
 	struct kmem_cache *ret = malloc(sizeof(*ret));
 
 	pthread_mutex_init(&ret->lock, NULL);
 	ret->size = size;
-	ret->align = align;
+	ret->align = args->align;
+	ret->sheaf_capacity = args->sheaf_capacity;
 	ret->nr_objs = 0;
 	ret->nr_allocated = 0;
 	ret->nr_tallocated = 0;
 	ret->objs = NULL;
-	ret->ctor = ctor;
+	ret->ctor = args->ctor;
 	ret->non_kernel = 0;
 	ret->exec_callback = false;
 	ret->callback = NULL;
 	ret->private = NULL;
+
 	return ret;
 }
 

-- 
2.51.0

[PATCH v6 10/10] maple_tree: use percpu sheaves for maple_node_cache

[Vlastimil Babka]

Setup the maple_node_cache with percpu sheaves of size 32 to hopefully
improve its performance. Note this will not immediately take advantage
of sheaf batching of kfree_rcu() operations due to the maple tree using
call_rcu with custom callbacks. The followup changes to maple tree will
change that and also make use of the prefilled sheaves functionality.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
---
 lib/maple_tree.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/lib/maple_tree.c b/lib/maple_tree.c
index b4ee2d29d7a962ca374467d0533185f2db3d35ff..a0db6bdc63793b8bbd544e246391d99e880dede3 100644
--- a/lib/maple_tree.c
+++ b/lib/maple_tree.c
@@ -6302,9 +6302,14 @@ bool mas_nomem(struct ma_state *mas, gfp_t gfp)
 
 void __init maple_tree_init(void)
 {
+	struct kmem_cache_args args = {
+		.align  = sizeof(struct maple_node),
+		.sheaf_capacity = 32,
+	};
+
 	maple_node_cache = kmem_cache_create("maple_node",
-			sizeof(struct maple_node), sizeof(struct maple_node),
-			SLAB_PANIC, NULL);
+			sizeof(struct maple_node), &args,
+			SLAB_PANIC);
 }
 
 /**

-- 
2.51.0

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Thorsten Leemhuis]

On 27.08.25 10:26, Vlastimil Babka wrote:
> Specifying a non-zero value for a new struct kmem_cache_args field
> sheaf_capacity will setup a caching layer of percpu arrays called
> sheaves of given capacity for the created cache.
> 
> Allocations from the cache will allocate via the percpu sheaves (main or
> spare) as long as they have no NUMA node preference. Frees will also
> put the object back into one of the sheaves.
> [...]

This patch showed up in linux-next today and from a *quick* glance at
things I suspect it might be the reason why my daily next rpm builds for
Fedora failed today like this:

""
In file included from ./include/linux/spinlock.h:63,
                 from ./include/linux/mmzone.h:8,
                 from ./include/linux/gfp.h:7,
                 from ./include/linux/mm.h:7,
                 from mm/slub.c:13:
mm/slub.c: In function ‘__pcs_replace_empty_main’:
mm/slub.c:4727:64: error: ‘local_trylock_t’ {aka ‘__seg_gs struct spinlock’} has no member named ‘llock’; did you mean ‘lock’?
 4727 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
      |                                                                ^~~~~
./include/linux/lockdep.h:392:61: note: in definition of macro ‘lockdep_assert_held’
  392 | #define lockdep_assert_held(l)                  do { (void)(l); } while (0)
      |                                                             ^
[...]
mm/slub.c:5653:29: note: in expansion of macro ‘this_cpu_ptr’
 5653 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
      |                             ^~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:287: mm/slub.o] Error 1
make[2]: *** [scripts/Makefile.build:556: mm] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builddir/build/BUILD/kernel-6.17.0-build/kernel-next-20250828/linux-6.17.0-0.0.next.20250828.432.vanilla.fc44.x86_64/Makefile:2017: .] Error 2
make: *** [Makefile:256: __sub-make] Error 2
""

Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz

Ciao, Thorsten

> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
>  include/linux/slab.h |   31 ++
>  mm/slab.h            |    2 +
>  mm/slab_common.c     |    5 +-
>  mm/slub.c            | 1159 +++++++++++++++++++++++++++++++++++++++++++++++---
>  4 files changed, 1135 insertions(+), 62 deletions(-)
> 
> diff --git a/include/linux/slab.h b/include/linux/slab.h
> index d5a8ab98035cf3e3d9043e3b038e1bebeff05b52..49acbcdc6696fd120c402adf757b3f41660ad50a 100644
> --- a/include/linux/slab.h
> +++ b/include/linux/slab.h
> @@ -335,6 +335,37 @@ struct kmem_cache_args {
>  	 * %NULL means no constructor.
>  	 */
>  	void (*ctor)(void *);
> +	/**
> +	 * @sheaf_capacity: Enable sheaves of given capacity for the cache.
> +	 *
> +	 * With a non-zero value, allocations from the cache go through caching
> +	 * arrays called sheaves. Each cpu has a main sheaf that's always
> +	 * present, and a spare sheaf that may be not present. When both become
> +	 * empty, there's an attempt to replace an empty sheaf with a full sheaf
> +	 * from the per-node barn.
> +	 *
> +	 * When no full sheaf is available, and gfp flags allow blocking, a
> +	 * sheaf is allocated and filled from slab(s) using bulk allocation.
> +	 * Otherwise the allocation falls back to the normal operation
> +	 * allocating a single object from a slab.
> +	 *
> +	 * Analogically when freeing and both percpu sheaves are full, the barn
> +	 * may replace it with an empty sheaf, unless it's over capacity. In
> +	 * that case a sheaf is bulk freed to slab pages.
> +	 *
> +	 * The sheaves do not enforce NUMA placement of objects, so allocations
> +	 * via kmem_cache_alloc_node() with a node specified other than
> +	 * NUMA_NO_NODE will bypass them.
> +	 *
> +	 * Bulk allocation and free operations also try to use the cpu sheaves
> +	 * and barn, but fallback to using slab pages directly.
> +	 *
> +	 * When slub_debug is enabled for the cache, the sheaf_capacity argument
> +	 * is ignored.
> +	 *
> +	 * %0 means no sheaves will be created.
> +	 */
> +	unsigned int sheaf_capacity;
>  };
>  
>  struct kmem_cache *__kmem_cache_create_args(const char *name,
> diff --git a/mm/slab.h b/mm/slab.h
> index 248b34c839b7ca39cf14e139c62d116efb97d30f..206987ce44a4d053ebe3b5e50784d2dd23822cd1 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -235,6 +235,7 @@ struct kmem_cache {
>  #ifndef CONFIG_SLUB_TINY
>  	struct kmem_cache_cpu __percpu *cpu_slab;
>  #endif
> +	struct slub_percpu_sheaves __percpu *cpu_sheaves;
>  	/* Used for retrieving partial slabs, etc. */
>  	slab_flags_t flags;
>  	unsigned long min_partial;
> @@ -248,6 +249,7 @@ struct kmem_cache {
>  	/* Number of per cpu partial slabs to keep around */
>  	unsigned int cpu_partial_slabs;
>  #endif
> +	unsigned int sheaf_capacity;
>  	struct kmem_cache_order_objects oo;
>  
>  	/* Allocation and freeing of slabs */
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index bfe7c40eeee1a01c175766935c1e3c0304434a53..e2b197e47866c30acdbd1fee4159f262a751c5a7 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -163,6 +163,9 @@ int slab_unmergeable(struct kmem_cache *s)
>  		return 1;
>  #endif
>  
> +	if (s->cpu_sheaves)
> +		return 1;
> +
>  	/*
>  	 * We may have set a slab to be unmergeable during bootstrap.
>  	 */
> @@ -321,7 +324,7 @@ struct kmem_cache *__kmem_cache_create_args(const char *name,
>  		    object_size - args->usersize < args->useroffset))
>  		args->usersize = args->useroffset = 0;
>  
> -	if (!args->usersize)
> +	if (!args->usersize && !args->sheaf_capacity)
>  		s = __kmem_cache_alias(name, object_size, args->align, flags,
>  				       args->ctor);
>  	if (s)
> diff --git a/mm/slub.c b/mm/slub.c
> index 9f671ec76131c4b0b28d5d568aa45842b5efb6d4..0822a817c28c2c4666e853ef0f433842c64f607a 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -363,8 +363,10 @@ static inline void debugfs_slab_add(struct kmem_cache *s) { }
>  #endif
>  
>  enum stat_item {
> +	ALLOC_PCS,		/* Allocation from percpu sheaf */
>  	ALLOC_FASTPATH,		/* Allocation from cpu slab */
>  	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
> +	FREE_PCS,		/* Free to percpu sheaf */
>  	FREE_FASTPATH,		/* Free to cpu slab */
>  	FREE_SLOWPATH,		/* Freeing not to cpu slab */
>  	FREE_FROZEN,		/* Freeing to frozen slab */
> @@ -389,6 +391,14 @@ enum stat_item {
>  	CPU_PARTIAL_FREE,	/* Refill cpu partial on free */
>  	CPU_PARTIAL_NODE,	/* Refill cpu partial from node partial */
>  	CPU_PARTIAL_DRAIN,	/* Drain cpu partial to node partial */
> +	SHEAF_FLUSH,		/* Objects flushed from a sheaf */
> +	SHEAF_REFILL,		/* Objects refilled to a sheaf */
> +	SHEAF_ALLOC,		/* Allocation of an empty sheaf */
> +	SHEAF_FREE,		/* Freeing of an empty sheaf */
> +	BARN_GET,		/* Got full sheaf from barn */
> +	BARN_GET_FAIL,		/* Failed to get full sheaf from barn */
> +	BARN_PUT,		/* Put full sheaf to barn */
> +	BARN_PUT_FAIL,		/* Failed to put full sheaf to barn */
>  	NR_SLUB_STAT_ITEMS
>  };
>  
> @@ -435,6 +445,33 @@ void stat_add(const struct kmem_cache *s, enum stat_item si, int v)
>  #endif
>  }
>  
> +#define MAX_FULL_SHEAVES	10
> +#define MAX_EMPTY_SHEAVES	10
> +
> +struct node_barn {
> +	spinlock_t lock;
> +	struct list_head sheaves_full;
> +	struct list_head sheaves_empty;
> +	unsigned int nr_full;
> +	unsigned int nr_empty;
> +};
> +
> +struct slab_sheaf {
> +	union {
> +		struct rcu_head rcu_head;
> +		struct list_head barn_list;
> +	};
> +	unsigned int size;
> +	void *objects[];
> +};
> +
> +struct slub_percpu_sheaves {
> +	local_trylock_t lock;
> +	struct slab_sheaf *main; /* never NULL when unlocked */
> +	struct slab_sheaf *spare; /* empty or full, may be NULL */
> +	struct node_barn *barn;
> +};
> +
>  /*
>   * The slab lists for all objects.
>   */
> @@ -447,6 +484,7 @@ struct kmem_cache_node {
>  	atomic_long_t total_objects;
>  	struct list_head full;
>  #endif
> +	struct node_barn *barn;
>  };
>  
>  static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
> @@ -470,12 +508,19 @@ static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
>   */
>  static nodemask_t slab_nodes;
>  
> -#ifndef CONFIG_SLUB_TINY
>  /*
>   * Workqueue used for flush_cpu_slab().
>   */
>  static struct workqueue_struct *flushwq;
> -#endif
> +
> +struct slub_flush_work {
> +	struct work_struct work;
> +	struct kmem_cache *s;
> +	bool skip;
> +};
> +
> +static DEFINE_MUTEX(flush_lock);
> +static DEFINE_PER_CPU(struct slub_flush_work, slub_flush);
>  
>  /********************************************************************
>   * 			Core slab cache functions
> @@ -2473,6 +2518,360 @@ static void *setup_object(struct kmem_cache *s, void *object)
>  	return object;
>  }
>  
> +static struct slab_sheaf *alloc_empty_sheaf(struct kmem_cache *s, gfp_t gfp)
> +{
> +	struct slab_sheaf *sheaf = kzalloc(struct_size(sheaf, objects,
> +					s->sheaf_capacity), gfp);
> +
> +	if (unlikely(!sheaf))
> +		return NULL;
> +
> +	stat(s, SHEAF_ALLOC);
> +
> +	return sheaf;
> +}
> +
> +static void free_empty_sheaf(struct kmem_cache *s, struct slab_sheaf *sheaf)
> +{
> +	kfree(sheaf);
> +
> +	stat(s, SHEAF_FREE);
> +}
> +
> +static int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags,
> +				   size_t size, void **p);
> +
> +
> +static int refill_sheaf(struct kmem_cache *s, struct slab_sheaf *sheaf,
> +			 gfp_t gfp)
> +{
> +	int to_fill = s->sheaf_capacity - sheaf->size;
> +	int filled;
> +
> +	if (!to_fill)
> +		return 0;
> +
> +	filled = __kmem_cache_alloc_bulk(s, gfp, to_fill,
> +					 &sheaf->objects[sheaf->size]);
> +
> +	sheaf->size += filled;
> +
> +	stat_add(s, SHEAF_REFILL, filled);
> +
> +	if (filled < to_fill)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +
> +
> +static struct slab_sheaf *alloc_full_sheaf(struct kmem_cache *s, gfp_t gfp)
> +{
> +	struct slab_sheaf *sheaf = alloc_empty_sheaf(s, gfp);
> +
> +	if (!sheaf)
> +		return NULL;
> +
> +	if (refill_sheaf(s, sheaf, gfp)) {
> +		free_empty_sheaf(s, sheaf);
> +		return NULL;
> +	}
> +
> +	return sheaf;
> +}
> +
> +/*
> + * Maximum number of objects freed during a single flush of main pcs sheaf.
> + * Translates directly to an on-stack array size.
> + */
> +#define PCS_BATCH_MAX	32U
> +
> +static void __kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p);
> +
> +/*
> + * Free all objects from the main sheaf. In order to perform
> + * __kmem_cache_free_bulk() outside of cpu_sheaves->lock, work in batches where
> + * object pointers are moved to a on-stack array under the lock. To bound the
> + * stack usage, limit each batch to PCS_BATCH_MAX.
> + *
> + * returns true if at least partially flushed
> + */
> +static bool sheaf_flush_main(struct kmem_cache *s)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +	unsigned int batch, remaining;
> +	void *objects[PCS_BATCH_MAX];
> +	struct slab_sheaf *sheaf;
> +	bool ret = false;
> +
> +next_batch:
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		return ret;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +	sheaf = pcs->main;
> +
> +	batch = min(PCS_BATCH_MAX, sheaf->size);
> +
> +	sheaf->size -= batch;
> +	memcpy(objects, sheaf->objects + sheaf->size, batch * sizeof(void *));
> +
> +	remaining = sheaf->size;
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	__kmem_cache_free_bulk(s, batch, &objects[0]);
> +
> +	stat_add(s, SHEAF_FLUSH, batch);
> +
> +	ret = true;
> +
> +	if (remaining)
> +		goto next_batch;
> +
> +	return ret;
> +}
> +
> +/*
> + * Free all objects from a sheaf that's unused, i.e. not linked to any
> + * cpu_sheaves, so we need no locking and batching. The locking is also not
> + * necessary when flushing cpu's sheaves (both spare and main) during cpu
> + * hotremove as the cpu is not executing anymore.
> + */
> +static void sheaf_flush_unused(struct kmem_cache *s, struct slab_sheaf *sheaf)
> +{
> +	if (!sheaf->size)
> +		return;
> +
> +	stat_add(s, SHEAF_FLUSH, sheaf->size);
> +
> +	__kmem_cache_free_bulk(s, sheaf->size, &sheaf->objects[0]);
> +
> +	sheaf->size = 0;
> +}
> +
> +/*
> + * Caller needs to make sure migration is disabled in order to fully flush
> + * single cpu's sheaves
> + *
> + * must not be called from an irq
> + *
> + * flushing operations are rare so let's keep it simple and flush to slabs
> + * directly, skipping the barn
> + */
> +static void pcs_flush_all(struct kmem_cache *s)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +	struct slab_sheaf *spare;
> +
> +	local_lock(&s->cpu_sheaves->lock);
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	spare = pcs->spare;
> +	pcs->spare = NULL;
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	if (spare) {
> +		sheaf_flush_unused(s, spare);
> +		free_empty_sheaf(s, spare);
> +	}
> +
> +	sheaf_flush_main(s);
> +}
> +
> +static void __pcs_flush_all_cpu(struct kmem_cache *s, unsigned int cpu)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +
> +	pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
> +
> +	/* The cpu is not executing anymore so we don't need pcs->lock */
> +	sheaf_flush_unused(s, pcs->main);
> +	if (pcs->spare) {
> +		sheaf_flush_unused(s, pcs->spare);
> +		free_empty_sheaf(s, pcs->spare);
> +		pcs->spare = NULL;
> +	}
> +}
> +
> +static void pcs_destroy(struct kmem_cache *s)
> +{
> +	int cpu;
> +
> +	for_each_possible_cpu(cpu) {
> +		struct slub_percpu_sheaves *pcs;
> +
> +		pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
> +
> +		/* can happen when unwinding failed create */
> +		if (!pcs->main)
> +			continue;
> +
> +		/*
> +		 * We have already passed __kmem_cache_shutdown() so everything
> +		 * was flushed and there should be no objects allocated from
> +		 * slabs, otherwise kmem_cache_destroy() would have aborted.
> +		 * Therefore something would have to be really wrong if the
> +		 * warnings here trigger, and we should rather leave objects and
> +		 * sheaves to leak in that case.
> +		 */
> +
> +		WARN_ON(pcs->spare);
> +
> +		if (!WARN_ON(pcs->main->size)) {
> +			free_empty_sheaf(s, pcs->main);
> +			pcs->main = NULL;
> +		}
> +	}
> +
> +	free_percpu(s->cpu_sheaves);
> +	s->cpu_sheaves = NULL;
> +}
> +
> +static struct slab_sheaf *barn_get_empty_sheaf(struct node_barn *barn)
> +{
> +	struct slab_sheaf *empty = NULL;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	if (barn->nr_empty) {
> +		empty = list_first_entry(&barn->sheaves_empty,
> +					 struct slab_sheaf, barn_list);
> +		list_del(&empty->barn_list);
> +		barn->nr_empty--;
> +	}
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +
> +	return empty;
> +}
> +
> +/*
> + * The following two functions are used mainly in cases where we have to undo an
> + * intended action due to a race or cpu migration. Thus they do not check the
> + * empty or full sheaf limits for simplicity.
> + */
> +
> +static void barn_put_empty_sheaf(struct node_barn *barn, struct slab_sheaf *sheaf)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	list_add(&sheaf->barn_list, &barn->sheaves_empty);
> +	barn->nr_empty++;
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +}
> +
> +static void barn_put_full_sheaf(struct node_barn *barn, struct slab_sheaf *sheaf)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	list_add(&sheaf->barn_list, &barn->sheaves_full);
> +	barn->nr_full++;
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +}
> +
> +/*
> + * If a full sheaf is available, return it and put the supplied empty one to
> + * barn. We ignore the limit on empty sheaves as the number of sheaves doesn't
> + * change.
> + */
> +static struct slab_sheaf *
> +barn_replace_empty_sheaf(struct node_barn *barn, struct slab_sheaf *empty)
> +{
> +	struct slab_sheaf *full = NULL;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	if (barn->nr_full) {
> +		full = list_first_entry(&barn->sheaves_full, struct slab_sheaf,
> +					barn_list);
> +		list_del(&full->barn_list);
> +		list_add(&empty->barn_list, &barn->sheaves_empty);
> +		barn->nr_full--;
> +		barn->nr_empty++;
> +	}
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +
> +	return full;
> +}
> +
> +/*
> + * If an empty sheaf is available, return it and put the supplied full one to
> + * barn. But if there are too many full sheaves, reject this with -E2BIG.
> + */
> +static struct slab_sheaf *
> +barn_replace_full_sheaf(struct node_barn *barn, struct slab_sheaf *full)
> +{
> +	struct slab_sheaf *empty;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	if (barn->nr_full >= MAX_FULL_SHEAVES) {
> +		empty = ERR_PTR(-E2BIG);
> +	} else if (!barn->nr_empty) {
> +		empty = ERR_PTR(-ENOMEM);
> +	} else {
> +		empty = list_first_entry(&barn->sheaves_empty, struct slab_sheaf,
> +					 barn_list);
> +		list_del(&empty->barn_list);
> +		list_add(&full->barn_list, &barn->sheaves_full);
> +		barn->nr_empty--;
> +		barn->nr_full++;
> +	}
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +
> +	return empty;
> +}
> +
> +static void barn_init(struct node_barn *barn)
> +{
> +	spin_lock_init(&barn->lock);
> +	INIT_LIST_HEAD(&barn->sheaves_full);
> +	INIT_LIST_HEAD(&barn->sheaves_empty);
> +	barn->nr_full = 0;
> +	barn->nr_empty = 0;
> +}
> +
> +static void barn_shrink(struct kmem_cache *s, struct node_barn *barn)
> +{
> +	struct list_head empty_list;
> +	struct list_head full_list;
> +	struct slab_sheaf *sheaf, *sheaf2;
> +	unsigned long flags;
> +
> +	INIT_LIST_HEAD(&empty_list);
> +	INIT_LIST_HEAD(&full_list);
> +
> +	spin_lock_irqsave(&barn->lock, flags);
> +
> +	list_splice_init(&barn->sheaves_full, &full_list);
> +	barn->nr_full = 0;
> +	list_splice_init(&barn->sheaves_empty, &empty_list);
> +	barn->nr_empty = 0;
> +
> +	spin_unlock_irqrestore(&barn->lock, flags);
> +
> +	list_for_each_entry_safe(sheaf, sheaf2, &full_list, barn_list) {
> +		sheaf_flush_unused(s, sheaf);
> +		free_empty_sheaf(s, sheaf);
> +	}
> +
> +	list_for_each_entry_safe(sheaf, sheaf2, &empty_list, barn_list)
> +		free_empty_sheaf(s, sheaf);
> +}
> +
>  /*
>   * Slab allocation and freeing
>   */
> @@ -3344,11 +3743,42 @@ static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu)
>  	put_partials_cpu(s, c);
>  }
>  
> -struct slub_flush_work {
> -	struct work_struct work;
> -	struct kmem_cache *s;
> -	bool skip;
> -};
> +static inline void flush_this_cpu_slab(struct kmem_cache *s)
> +{
> +	struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab);
> +
> +	if (c->slab)
> +		flush_slab(s, c);
> +
> +	put_partials(s);
> +}
> +
> +static bool has_cpu_slab(int cpu, struct kmem_cache *s)
> +{
> +	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
> +
> +	return c->slab || slub_percpu_partial(c);
> +}
> +
> +#else /* CONFIG_SLUB_TINY */
> +static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu) { }
> +static inline bool has_cpu_slab(int cpu, struct kmem_cache *s) { return false; }
> +static inline void flush_this_cpu_slab(struct kmem_cache *s) { }
> +#endif /* CONFIG_SLUB_TINY */
> +
> +static bool has_pcs_used(int cpu, struct kmem_cache *s)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +
> +	if (!s->cpu_sheaves)
> +		return false;
> +
> +	pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
> +
> +	return (pcs->spare || pcs->main->size);
> +}
> +
> +static void pcs_flush_all(struct kmem_cache *s);
>  
>  /*
>   * Flush cpu slab.
> @@ -3358,30 +3788,18 @@ struct slub_flush_work {
>  static void flush_cpu_slab(struct work_struct *w)
>  {
>  	struct kmem_cache *s;
> -	struct kmem_cache_cpu *c;
>  	struct slub_flush_work *sfw;
>  
>  	sfw = container_of(w, struct slub_flush_work, work);
>  
>  	s = sfw->s;
> -	c = this_cpu_ptr(s->cpu_slab);
> -
> -	if (c->slab)
> -		flush_slab(s, c);
> -
> -	put_partials(s);
> -}
>  
> -static bool has_cpu_slab(int cpu, struct kmem_cache *s)
> -{
> -	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
> +	if (s->cpu_sheaves)
> +		pcs_flush_all(s);
>  
> -	return c->slab || slub_percpu_partial(c);
> +	flush_this_cpu_slab(s);
>  }
>  
> -static DEFINE_MUTEX(flush_lock);
> -static DEFINE_PER_CPU(struct slub_flush_work, slub_flush);
> -
>  static void flush_all_cpus_locked(struct kmem_cache *s)
>  {
>  	struct slub_flush_work *sfw;
> @@ -3392,7 +3810,7 @@ static void flush_all_cpus_locked(struct kmem_cache *s)
>  
>  	for_each_online_cpu(cpu) {
>  		sfw = &per_cpu(slub_flush, cpu);
> -		if (!has_cpu_slab(cpu, s)) {
> +		if (!has_cpu_slab(cpu, s) && !has_pcs_used(cpu, s)) {
>  			sfw->skip = true;
>  			continue;
>  		}
> @@ -3428,19 +3846,15 @@ static int slub_cpu_dead(unsigned int cpu)
>  	struct kmem_cache *s;
>  
>  	mutex_lock(&slab_mutex);
> -	list_for_each_entry(s, &slab_caches, list)
> +	list_for_each_entry(s, &slab_caches, list) {
>  		__flush_cpu_slab(s, cpu);
> +		if (s->cpu_sheaves)
> +			__pcs_flush_all_cpu(s, cpu);
> +	}
>  	mutex_unlock(&slab_mutex);
>  	return 0;
>  }
>  
> -#else /* CONFIG_SLUB_TINY */
> -static inline void flush_all_cpus_locked(struct kmem_cache *s) { }
> -static inline void flush_all(struct kmem_cache *s) { }
> -static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu) { }
> -static inline int slub_cpu_dead(unsigned int cpu) { return 0; }
> -#endif /* CONFIG_SLUB_TINY */
> -
>  /*
>   * Check if the objects in a per cpu structure fit numa
>   * locality expectations.
> @@ -4191,30 +4605,237 @@ bool slab_post_alloc_hook(struct kmem_cache *s, struct list_lru *lru,
>  }
>  
>  /*
> - * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
> - * have the fastpath folded into their functions. So no function call
> - * overhead for requests that can be satisfied on the fastpath.
> - *
> - * The fastpath works by first checking if the lockless freelist can be used.
> - * If not then __slab_alloc is called for slow processing.
> + * Replace the empty main sheaf with a (at least partially) full sheaf.
>   *
> - * Otherwise we can simply pick the next object from the lockless free list.
> + * Must be called with the cpu_sheaves local lock locked. If successful, returns
> + * the pcs pointer and the local lock locked (possibly on a different cpu than
> + * initially called). If not successful, returns NULL and the local lock
> + * unlocked.
>   */
> -static __fastpath_inline void *slab_alloc_node(struct kmem_cache *s, struct list_lru *lru,
> -		gfp_t gfpflags, int node, unsigned long addr, size_t orig_size)
> +static struct slub_percpu_sheaves *
> +__pcs_replace_empty_main(struct kmem_cache *s, struct slub_percpu_sheaves *pcs, gfp_t gfp)
>  {
> -	void *object;
> -	bool init = false;
> +	struct slab_sheaf *empty = NULL;
> +	struct slab_sheaf *full;
> +	bool can_alloc;
>  
> -	s = slab_pre_alloc_hook(s, gfpflags);
> -	if (unlikely(!s))
> -		return NULL;
> +	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>  
> -	object = kfence_alloc(s, orig_size, gfpflags);
> -	if (unlikely(object))
> +	if (pcs->spare && pcs->spare->size > 0) {
> +		swap(pcs->main, pcs->spare);
> +		return pcs;
> +	}
> +
> +	full = barn_replace_empty_sheaf(pcs->barn, pcs->main);
> +
> +	if (full) {
> +		stat(s, BARN_GET);
> +		pcs->main = full;
> +		return pcs;
> +	}
> +
> +	stat(s, BARN_GET_FAIL);
> +
> +	can_alloc = gfpflags_allow_blocking(gfp);
> +
> +	if (can_alloc) {
> +		if (pcs->spare) {
> +			empty = pcs->spare;
> +			pcs->spare = NULL;
> +		} else {
> +			empty = barn_get_empty_sheaf(pcs->barn);
> +		}
> +	}
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	if (!can_alloc)
> +		return NULL;
> +
> +	if (empty) {
> +		if (!refill_sheaf(s, empty, gfp)) {
> +			full = empty;
> +		} else {
> +			/*
> +			 * we must be very low on memory so don't bother
> +			 * with the barn
> +			 */
> +			free_empty_sheaf(s, empty);
> +		}
> +	} else {
> +		full = alloc_full_sheaf(s, gfp);
> +	}
> +
> +	if (!full)
> +		return NULL;
> +
> +	/*
> +	 * we can reach here only when gfpflags_allow_blocking
> +	 * so this must not be an irq
> +	 */
> +	local_lock(&s->cpu_sheaves->lock);
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	/*
> +	 * If we are returning empty sheaf, we either got it from the
> +	 * barn or had to allocate one. If we are returning a full
> +	 * sheaf, it's due to racing or being migrated to a different
> +	 * cpu. Breaching the barn's sheaf limits should be thus rare
> +	 * enough so just ignore them to simplify the recovery.
> +	 */
> +
> +	if (pcs->main->size == 0) {
> +		barn_put_empty_sheaf(pcs->barn, pcs->main);
> +		pcs->main = full;
> +		return pcs;
> +	}
> +
> +	if (!pcs->spare) {
> +		pcs->spare = full;
> +		return pcs;
> +	}
> +
> +	if (pcs->spare->size == 0) {
> +		barn_put_empty_sheaf(pcs->barn, pcs->spare);
> +		pcs->spare = full;
> +		return pcs;
> +	}
> +
> +	barn_put_full_sheaf(pcs->barn, full);
> +	stat(s, BARN_PUT);
> +
> +	return pcs;
> +}
> +
> +static __fastpath_inline
> +void *alloc_from_pcs(struct kmem_cache *s, gfp_t gfp)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +	void *object;
> +
> +#ifdef CONFIG_NUMA
> +	if (static_branch_unlikely(&strict_numa)) {
> +		if (current->mempolicy)
> +			return NULL;
> +	}
> +#endif
> +
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		return NULL;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	if (unlikely(pcs->main->size == 0)) {
> +		pcs = __pcs_replace_empty_main(s, pcs, gfp);
> +		if (unlikely(!pcs))
> +			return NULL;
> +	}
> +
> +	object = pcs->main->objects[--pcs->main->size];
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	stat(s, ALLOC_PCS);
> +
> +	return object;
> +}
> +
> +static __fastpath_inline
> +unsigned int alloc_from_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +	struct slab_sheaf *main;
> +	unsigned int allocated = 0;
> +	unsigned int batch;
> +
> +next_batch:
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		return allocated;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	if (unlikely(pcs->main->size == 0)) {
> +
> +		struct slab_sheaf *full;
> +
> +		if (pcs->spare && pcs->spare->size > 0) {
> +			swap(pcs->main, pcs->spare);
> +			goto do_alloc;
> +		}
> +
> +		full = barn_replace_empty_sheaf(pcs->barn, pcs->main);
> +
> +		if (full) {
> +			stat(s, BARN_GET);
> +			pcs->main = full;
> +			goto do_alloc;
> +		}
> +
> +		stat(s, BARN_GET_FAIL);
> +
> +		local_unlock(&s->cpu_sheaves->lock);
> +
> +		/*
> +		 * Once full sheaves in barn are depleted, let the bulk
> +		 * allocation continue from slab pages, otherwise we would just
> +		 * be copying arrays of pointers twice.
> +		 */
> +		return allocated;
> +	}
> +
> +do_alloc:
> +
> +	main = pcs->main;
> +	batch = min(size, main->size);
> +
> +	main->size -= batch;
> +	memcpy(p, main->objects + main->size, batch * sizeof(void *));
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	stat_add(s, ALLOC_PCS, batch);
> +
> +	allocated += batch;
> +
> +	if (batch < size) {
> +		p += batch;
> +		size -= batch;
> +		goto next_batch;
> +	}
> +
> +	return allocated;
> +}
> +
> +
> +/*
> + * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
> + * have the fastpath folded into their functions. So no function call
> + * overhead for requests that can be satisfied on the fastpath.
> + *
> + * The fastpath works by first checking if the lockless freelist can be used.
> + * If not then __slab_alloc is called for slow processing.
> + *
> + * Otherwise we can simply pick the next object from the lockless free list.
> + */
> +static __fastpath_inline void *slab_alloc_node(struct kmem_cache *s, struct list_lru *lru,
> +		gfp_t gfpflags, int node, unsigned long addr, size_t orig_size)
> +{
> +	void *object;
> +	bool init = false;
> +
> +	s = slab_pre_alloc_hook(s, gfpflags);
> +	if (unlikely(!s))
> +		return NULL;
> +
> +	object = kfence_alloc(s, orig_size, gfpflags);
> +	if (unlikely(object))
>  		goto out;
>  
> -	object = __slab_alloc_node(s, gfpflags, node, addr, orig_size);
> +	if (s->cpu_sheaves && node == NUMA_NO_NODE)
> +		object = alloc_from_pcs(s, gfpflags);
> +
> +	if (!object)
> +		object = __slab_alloc_node(s, gfpflags, node, addr, orig_size);
>  
>  	maybe_wipe_obj_freeptr(s, object);
>  	init = slab_want_init_on_alloc(gfpflags, s);
> @@ -4591,6 +5212,288 @@ static void __slab_free(struct kmem_cache *s, struct slab *slab,
>  	discard_slab(s, slab);
>  }
>  
> +/*
> + * pcs is locked. We should have get rid of the spare sheaf and obtained an
> + * empty sheaf, while the main sheaf is full. We want to install the empty sheaf
> + * as a main sheaf, and make the current main sheaf a spare sheaf.
> + *
> + * However due to having relinquished the cpu_sheaves lock when obtaining
> + * the empty sheaf, we need to handle some unlikely but possible cases.
> + *
> + * If we put any sheaf to barn here, it's because we were interrupted or have
> + * been migrated to a different cpu, which should be rare enough so just ignore
> + * the barn's limits to simplify the handling.
> + *
> + * An alternative scenario that gets us here is when we fail
> + * barn_replace_full_sheaf(), because there's no empty sheaf available in the
> + * barn, so we had to allocate it by alloc_empty_sheaf(). But because we saw the
> + * limit on full sheaves was not exceeded, we assume it didn't change and just
> + * put the full sheaf there.
> + */
> +static void __pcs_install_empty_sheaf(struct kmem_cache *s,
> +		struct slub_percpu_sheaves *pcs, struct slab_sheaf *empty)
> +{
> +	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
> +
> +	/* This is what we expect to find if nobody interrupted us. */
> +	if (likely(!pcs->spare)) {
> +		pcs->spare = pcs->main;
> +		pcs->main = empty;
> +		return;
> +	}
> +
> +	/*
> +	 * Unlikely because if the main sheaf had space, we would have just
> +	 * freed to it. Get rid of our empty sheaf.
> +	 */
> +	if (pcs->main->size < s->sheaf_capacity) {
> +		barn_put_empty_sheaf(pcs->barn, empty);
> +		return;
> +	}
> +
> +	/* Also unlikely for the same reason */
> +	if (pcs->spare->size < s->sheaf_capacity) {
> +		swap(pcs->main, pcs->spare);
> +		barn_put_empty_sheaf(pcs->barn, empty);
> +		return;
> +	}
> +
> +	/*
> +	 * We probably failed barn_replace_full_sheaf() due to no empty sheaf
> +	 * available there, but we allocated one, so finish the job.
> +	 */
> +	barn_put_full_sheaf(pcs->barn, pcs->main);
> +	stat(s, BARN_PUT);
> +	pcs->main = empty;
> +}
> +
> +/*
> + * Replace the full main sheaf with a (at least partially) empty sheaf.
> + *
> + * Must be called with the cpu_sheaves local lock locked. If successful, returns
> + * the pcs pointer and the local lock locked (possibly on a different cpu than
> + * initially called). If not successful, returns NULL and the local lock
> + * unlocked.
> + */
> +static struct slub_percpu_sheaves *
> +__pcs_replace_full_main(struct kmem_cache *s, struct slub_percpu_sheaves *pcs)
> +{
> +	struct slab_sheaf *empty;
> +	bool put_fail;
> +
> +restart:
> +	lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
> +
> +	put_fail = false;
> +
> +	if (!pcs->spare) {
> +		empty = barn_get_empty_sheaf(pcs->barn);
> +		if (empty) {
> +			pcs->spare = pcs->main;
> +			pcs->main = empty;
> +			return pcs;
> +		}
> +		goto alloc_empty;
> +	}
> +
> +	if (pcs->spare->size < s->sheaf_capacity) {
> +		swap(pcs->main, pcs->spare);
> +		return pcs;
> +	}
> +
> +	empty = barn_replace_full_sheaf(pcs->barn, pcs->main);
> +
> +	if (!IS_ERR(empty)) {
> +		stat(s, BARN_PUT);
> +		pcs->main = empty;
> +		return pcs;
> +	}
> +
> +	if (PTR_ERR(empty) == -E2BIG) {
> +		/* Since we got here, spare exists and is full */
> +		struct slab_sheaf *to_flush = pcs->spare;
> +
> +		stat(s, BARN_PUT_FAIL);
> +
> +		pcs->spare = NULL;
> +		local_unlock(&s->cpu_sheaves->lock);
> +
> +		sheaf_flush_unused(s, to_flush);
> +		empty = to_flush;
> +		goto got_empty;
> +	}
> +
> +	/*
> +	 * We could not replace full sheaf because barn had no empty
> +	 * sheaves. We can still allocate it and put the full sheaf in
> +	 * __pcs_install_empty_sheaf(), but if we fail to allocate it,
> +	 * make sure to count the fail.
> +	 */
> +	put_fail = true;
> +
> +alloc_empty:
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	empty = alloc_empty_sheaf(s, GFP_NOWAIT);
> +	if (empty)
> +		goto got_empty;
> +
> +	if (put_fail)
> +		 stat(s, BARN_PUT_FAIL);
> +
> +	if (!sheaf_flush_main(s))
> +		return NULL;
> +
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		return NULL;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	/*
> +	 * we flushed the main sheaf so it should be empty now,
> +	 * but in case we got preempted or migrated, we need to
> +	 * check again
> +	 */
> +	if (pcs->main->size == s->sheaf_capacity)
> +		goto restart;
> +
> +	return pcs;
> +
> +got_empty:
> +	if (!local_trylock(&s->cpu_sheaves->lock)) {
> +		barn_put_empty_sheaf(pcs->barn, empty);
> +		return NULL;
> +	}
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +	__pcs_install_empty_sheaf(s, pcs, empty);
> +
> +	return pcs;
> +}
> +
> +/*
> + * Free an object to the percpu sheaves.
> + * The object is expected to have passed slab_free_hook() already.
> + */
> +static __fastpath_inline
> +bool free_to_pcs(struct kmem_cache *s, void *object)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		return false;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	if (unlikely(pcs->main->size == s->sheaf_capacity)) {
> +
> +		pcs = __pcs_replace_full_main(s, pcs);
> +		if (unlikely(!pcs))
> +			return false;
> +	}
> +
> +	pcs->main->objects[pcs->main->size++] = object;
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	stat(s, FREE_PCS);
> +
> +	return true;
> +}
> +
> +/*
> + * Bulk free objects to the percpu sheaves.
> + * Unlike free_to_pcs() this includes the calls to all necessary hooks
> + * and the fallback to freeing to slab pages.
> + */
> +static void free_to_pcs_bulk(struct kmem_cache *s, size_t size, void **p)
> +{
> +	struct slub_percpu_sheaves *pcs;
> +	struct slab_sheaf *main, *empty;
> +	unsigned int batch, i = 0;
> +	bool init;
> +
> +	init = slab_want_init_on_free(s);
> +
> +	while (i < size) {
> +		struct slab *slab = virt_to_slab(p[i]);
> +
> +		memcg_slab_free_hook(s, slab, p + i, 1);
> +		alloc_tagging_slab_free_hook(s, slab, p + i, 1);
> +
> +		if (unlikely(!slab_free_hook(s, p[i], init, false))) {
> +			p[i] = p[--size];
> +			if (!size)
> +				return;
> +			continue;
> +		}
> +
> +		i++;
> +	}
> +
> +next_batch:
> +	if (!local_trylock(&s->cpu_sheaves->lock))
> +		goto fallback;
> +
> +	pcs = this_cpu_ptr(s->cpu_sheaves);
> +
> +	if (likely(pcs->main->size < s->sheaf_capacity))
> +		goto do_free;
> +
> +	if (!pcs->spare) {
> +		empty = barn_get_empty_sheaf(pcs->barn);
> +		if (!empty)
> +			goto no_empty;
> +
> +		pcs->spare = pcs->main;
> +		pcs->main = empty;
> +		goto do_free;
> +	}
> +
> +	if (pcs->spare->size < s->sheaf_capacity) {
> +		swap(pcs->main, pcs->spare);
> +		goto do_free;
> +	}
> +
> +	empty = barn_replace_full_sheaf(pcs->barn, pcs->main);
> +	if (IS_ERR(empty)) {
> +		stat(s, BARN_PUT_FAIL);
> +		goto no_empty;
> +	}
> +
> +	stat(s, BARN_PUT);
> +	pcs->main = empty;
> +
> +do_free:
> +	main = pcs->main;
> +	batch = min(size, s->sheaf_capacity - main->size);
> +
> +	memcpy(main->objects + main->size, p, batch * sizeof(void *));
> +	main->size += batch;
> +
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	stat_add(s, FREE_PCS, batch);
> +
> +	if (batch < size) {
> +		p += batch;
> +		size -= batch;
> +		goto next_batch;
> +	}
> +
> +	return;
> +
> +no_empty:
> +	local_unlock(&s->cpu_sheaves->lock);
> +
> +	/*
> +	 * if we depleted all empty sheaves in the barn or there are too
> +	 * many full sheaves, free the rest to slab pages
> +	 */
> +fallback:
> +	__kmem_cache_free_bulk(s, size, p);
> +}
> +
>  #ifndef CONFIG_SLUB_TINY
>  /*
>   * Fastpath with forced inlining to produce a kfree and kmem_cache_free that
> @@ -4677,7 +5580,10 @@ void slab_free(struct kmem_cache *s, struct slab *slab, void *object,
>  	memcg_slab_free_hook(s, slab, &object, 1);
>  	alloc_tagging_slab_free_hook(s, slab, &object, 1);
>  
> -	if (likely(slab_free_hook(s, object, slab_want_init_on_free(s), false)))
> +	if (unlikely(!slab_free_hook(s, object, slab_want_init_on_free(s), false)))
> +		return;
> +
> +	if (!s->cpu_sheaves || !free_to_pcs(s, object))
>  		do_slab_free(s, slab, object, object, 1, addr);
>  }
>  
> @@ -5273,6 +6179,15 @@ void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p)
>  	if (!size)
>  		return;
>  
> +	/*
> +	 * freeing to sheaves is so incompatible with the detached freelist so
> +	 * once we go that way, we have to do everything differently
> +	 */
> +	if (s && s->cpu_sheaves) {
> +		free_to_pcs_bulk(s, size, p);
> +		return;
> +	}
> +
>  	do {
>  		struct detached_freelist df;
>  
> @@ -5391,7 +6306,7 @@ static int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags,
>  int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
>  				 void **p)
>  {
> -	int i;
> +	unsigned int i = 0;
>  
>  	if (!size)
>  		return 0;
> @@ -5400,9 +6315,20 @@ int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
>  	if (unlikely(!s))
>  		return 0;
>  
> -	i = __kmem_cache_alloc_bulk(s, flags, size, p);
> -	if (unlikely(i == 0))
> -		return 0;
> +	if (s->cpu_sheaves)
> +		i = alloc_from_pcs_bulk(s, size, p);
> +
> +	if (i < size) {
> +		/*
> +		 * If we ran out of memory, don't bother with freeing back to
> +		 * the percpu sheaves, we have bigger problems.
> +		 */
> +		if (unlikely(__kmem_cache_alloc_bulk(s, flags, size - i, p + i) == 0)) {
> +			if (i > 0)
> +				__kmem_cache_free_bulk(s, i, p);
> +			return 0;
> +		}
> +	}
>  
>  	/*
>  	 * memcg and kmem_cache debug support and memory initialization.
> @@ -5412,11 +6338,11 @@ int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size,
>  		    slab_want_init_on_alloc(flags, s), s->object_size))) {
>  		return 0;
>  	}
> -	return i;
> +
> +	return size;
>  }
>  EXPORT_SYMBOL(kmem_cache_alloc_bulk_noprof);
>  
> -
>  /*
>   * Object placement in a slab is made very easy because we always start at
>   * offset 0. If we tune the size of the object to the alignment then we can
> @@ -5550,7 +6476,7 @@ static inline int calculate_order(unsigned int size)
>  }
>  
>  static void
> -init_kmem_cache_node(struct kmem_cache_node *n)
> +init_kmem_cache_node(struct kmem_cache_node *n, struct node_barn *barn)
>  {
>  	n->nr_partial = 0;
>  	spin_lock_init(&n->list_lock);
> @@ -5560,6 +6486,9 @@ init_kmem_cache_node(struct kmem_cache_node *n)
>  	atomic_long_set(&n->total_objects, 0);
>  	INIT_LIST_HEAD(&n->full);
>  #endif
> +	n->barn = barn;
> +	if (barn)
> +		barn_init(barn);
>  }
>  
>  #ifndef CONFIG_SLUB_TINY
> @@ -5590,6 +6519,30 @@ static inline int alloc_kmem_cache_cpus(struct kmem_cache *s)
>  }
>  #endif /* CONFIG_SLUB_TINY */
>  
> +static int init_percpu_sheaves(struct kmem_cache *s)
> +{
> +	int cpu;
> +
> +	for_each_possible_cpu(cpu) {
> +		struct slub_percpu_sheaves *pcs;
> +		int nid;
> +
> +		pcs = per_cpu_ptr(s->cpu_sheaves, cpu);
> +
> +		local_trylock_init(&pcs->lock);
> +
> +		nid = cpu_to_mem(cpu);
> +
> +		pcs->barn = get_node(s, nid)->barn;
> +		pcs->main = alloc_empty_sheaf(s, GFP_KERNEL);
> +
> +		if (!pcs->main)
> +			return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
>  static struct kmem_cache *kmem_cache_node;
>  
>  /*
> @@ -5625,7 +6578,7 @@ static void early_kmem_cache_node_alloc(int node)
>  	slab->freelist = get_freepointer(kmem_cache_node, n);
>  	slab->inuse = 1;
>  	kmem_cache_node->node[node] = n;
> -	init_kmem_cache_node(n);
> +	init_kmem_cache_node(n, NULL);
>  	inc_slabs_node(kmem_cache_node, node, slab->objects);
>  
>  	/*
> @@ -5641,6 +6594,13 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
>  	struct kmem_cache_node *n;
>  
>  	for_each_kmem_cache_node(s, node, n) {
> +		if (n->barn) {
> +			WARN_ON(n->barn->nr_full);
> +			WARN_ON(n->barn->nr_empty);
> +			kfree(n->barn);
> +			n->barn = NULL;
> +		}
> +
>  		s->node[node] = NULL;
>  		kmem_cache_free(kmem_cache_node, n);
>  	}
> @@ -5649,6 +6609,8 @@ static void free_kmem_cache_nodes(struct kmem_cache *s)
>  void __kmem_cache_release(struct kmem_cache *s)
>  {
>  	cache_random_seq_destroy(s);
> +	if (s->cpu_sheaves)
> +		pcs_destroy(s);
>  #ifndef CONFIG_SLUB_TINY
>  	free_percpu(s->cpu_slab);
>  #endif
> @@ -5661,18 +6623,29 @@ static int init_kmem_cache_nodes(struct kmem_cache *s)
>  
>  	for_each_node_mask(node, slab_nodes) {
>  		struct kmem_cache_node *n;
> +		struct node_barn *barn = NULL;
>  
>  		if (slab_state == DOWN) {
>  			early_kmem_cache_node_alloc(node);
>  			continue;
>  		}
> +
> +		if (s->cpu_sheaves) {
> +			barn = kmalloc_node(sizeof(*barn), GFP_KERNEL, node);
> +
> +			if (!barn)
> +				return 0;
> +		}
> +
>  		n = kmem_cache_alloc_node(kmem_cache_node,
>  						GFP_KERNEL, node);
> -
> -		if (!n)
> +		if (!n) {
> +			kfree(barn);
>  			return 0;
> +		}
> +
> +		init_kmem_cache_node(n, barn);
>  
> -		init_kmem_cache_node(n);
>  		s->node[node] = n;
>  	}
>  	return 1;
> @@ -5929,6 +6902,8 @@ int __kmem_cache_shutdown(struct kmem_cache *s)
>  	flush_all_cpus_locked(s);
>  	/* Attempt to free all objects */
>  	for_each_kmem_cache_node(s, node, n) {
> +		if (n->barn)
> +			barn_shrink(s, n->barn);
>  		free_partial(s, n);
>  		if (n->nr_partial || node_nr_slabs(n))
>  			return 1;
> @@ -6132,6 +7107,9 @@ static int __kmem_cache_do_shrink(struct kmem_cache *s)
>  		for (i = 0; i < SHRINK_PROMOTE_MAX; i++)
>  			INIT_LIST_HEAD(promote + i);
>  
> +		if (n->barn)
> +			barn_shrink(s, n->barn);
> +
>  		spin_lock_irqsave(&n->list_lock, flags);
>  
>  		/*
> @@ -6211,12 +7189,24 @@ static int slab_mem_going_online_callback(int nid)
>  	 */
>  	mutex_lock(&slab_mutex);
>  	list_for_each_entry(s, &slab_caches, list) {
> +		struct node_barn *barn = NULL;
> +
>  		/*
>  		 * The structure may already exist if the node was previously
>  		 * onlined and offlined.
>  		 */
>  		if (get_node(s, nid))
>  			continue;
> +
> +		if (s->cpu_sheaves) {
> +			barn = kmalloc_node(sizeof(*barn), GFP_KERNEL, nid);
> +
> +			if (!barn) {
> +				ret = -ENOMEM;
> +				goto out;
> +			}
> +		}
> +
>  		/*
>  		 * XXX: kmem_cache_alloc_node will fallback to other nodes
>  		 *      since memory is not yet available from the node that
> @@ -6224,10 +7214,13 @@ static int slab_mem_going_online_callback(int nid)
>  		 */
>  		n = kmem_cache_alloc(kmem_cache_node, GFP_KERNEL);
>  		if (!n) {
> +			kfree(barn);
>  			ret = -ENOMEM;
>  			goto out;
>  		}
> -		init_kmem_cache_node(n);
> +
> +		init_kmem_cache_node(n, barn);
> +
>  		s->node[nid] = n;
>  	}
>  	/*
> @@ -6440,6 +7433,17 @@ int do_kmem_cache_create(struct kmem_cache *s, const char *name,
>  
>  	set_cpu_partial(s);
>  
> +	if (args->sheaf_capacity && !IS_ENABLED(CONFIG_SLUB_TINY)
> +					&& !(s->flags & SLAB_DEBUG_FLAGS)) {
> +		s->cpu_sheaves = alloc_percpu(struct slub_percpu_sheaves);
> +		if (!s->cpu_sheaves) {
> +			err = -ENOMEM;
> +			goto out;
> +		}
> +		// TODO: increase capacity to grow slab_sheaf up to next kmalloc size?
> +		s->sheaf_capacity = args->sheaf_capacity;
> +	}
> +
>  #ifdef CONFIG_NUMA
>  	s->remote_node_defrag_ratio = 1000;
>  #endif
> @@ -6456,6 +7460,12 @@ int do_kmem_cache_create(struct kmem_cache *s, const char *name,
>  	if (!alloc_kmem_cache_cpus(s))
>  		goto out;
>  
> +	if (s->cpu_sheaves) {
> +		err = init_percpu_sheaves(s);
> +		if (err)
> +			goto out;
> +	}
> +
>  	err = 0;
>  
>  	/* Mutex is not taken during early boot */
> @@ -6908,6 +7918,12 @@ static ssize_t order_show(struct kmem_cache *s, char *buf)
>  }
>  SLAB_ATTR_RO(order);
>  
> +static ssize_t sheaf_capacity_show(struct kmem_cache *s, char *buf)
> +{
> +	return sysfs_emit(buf, "%u\n", s->sheaf_capacity);
> +}
> +SLAB_ATTR_RO(sheaf_capacity);
> +
>  static ssize_t min_partial_show(struct kmem_cache *s, char *buf)
>  {
>  	return sysfs_emit(buf, "%lu\n", s->min_partial);
> @@ -7255,8 +8271,10 @@ static ssize_t text##_store(struct kmem_cache *s,		\
>  }								\
>  SLAB_ATTR(text);						\
>  
> +STAT_ATTR(ALLOC_PCS, alloc_cpu_sheaf);
>  STAT_ATTR(ALLOC_FASTPATH, alloc_fastpath);
>  STAT_ATTR(ALLOC_SLOWPATH, alloc_slowpath);
> +STAT_ATTR(FREE_PCS, free_cpu_sheaf);
>  STAT_ATTR(FREE_FASTPATH, free_fastpath);
>  STAT_ATTR(FREE_SLOWPATH, free_slowpath);
>  STAT_ATTR(FREE_FROZEN, free_frozen);
> @@ -7281,6 +8299,14 @@ STAT_ATTR(CPU_PARTIAL_ALLOC, cpu_partial_alloc);
>  STAT_ATTR(CPU_PARTIAL_FREE, cpu_partial_free);
>  STAT_ATTR(CPU_PARTIAL_NODE, cpu_partial_node);
>  STAT_ATTR(CPU_PARTIAL_DRAIN, cpu_partial_drain);
> +STAT_ATTR(SHEAF_FLUSH, sheaf_flush);
> +STAT_ATTR(SHEAF_REFILL, sheaf_refill);
> +STAT_ATTR(SHEAF_ALLOC, sheaf_alloc);
> +STAT_ATTR(SHEAF_FREE, sheaf_free);
> +STAT_ATTR(BARN_GET, barn_get);
> +STAT_ATTR(BARN_GET_FAIL, barn_get_fail);
> +STAT_ATTR(BARN_PUT, barn_put);
> +STAT_ATTR(BARN_PUT_FAIL, barn_put_fail);
>  #endif	/* CONFIG_SLUB_STATS */
>  
>  #ifdef CONFIG_KFENCE
> @@ -7311,6 +8337,7 @@ static struct attribute *slab_attrs[] = {
>  	&object_size_attr.attr,
>  	&objs_per_slab_attr.attr,
>  	&order_attr.attr,
> +	&sheaf_capacity_attr.attr,
>  	&min_partial_attr.attr,
>  	&cpu_partial_attr.attr,
>  	&objects_partial_attr.attr,
> @@ -7342,8 +8369,10 @@ static struct attribute *slab_attrs[] = {
>  	&remote_node_defrag_ratio_attr.attr,
>  #endif
>  #ifdef CONFIG_SLUB_STATS
> +	&alloc_cpu_sheaf_attr.attr,
>  	&alloc_fastpath_attr.attr,
>  	&alloc_slowpath_attr.attr,
> +	&free_cpu_sheaf_attr.attr,
>  	&free_fastpath_attr.attr,
>  	&free_slowpath_attr.attr,
>  	&free_frozen_attr.attr,
> @@ -7368,6 +8397,14 @@ static struct attribute *slab_attrs[] = {
>  	&cpu_partial_free_attr.attr,
>  	&cpu_partial_node_attr.attr,
>  	&cpu_partial_drain_attr.attr,
> +	&sheaf_flush_attr.attr,
> +	&sheaf_refill_attr.attr,
> +	&sheaf_alloc_attr.attr,
> +	&sheaf_free_attr.attr,
> +	&barn_get_attr.attr,
> +	&barn_get_fail_attr.attr,
> +	&barn_put_attr.attr,
> +	&barn_put_fail_attr.attr,
>  #endif
>  #ifdef CONFIG_FAILSLAB
>  	&failslab_attr.attr,
> 

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Vlastimil Babka]

On 8/28/25 09:43, Thorsten Leemhuis wrote:
> On 27.08.25 10:26, Vlastimil Babka wrote:
>> Specifying a non-zero value for a new struct kmem_cache_args field
>> sheaf_capacity will setup a caching layer of percpu arrays called
>> sheaves of given capacity for the created cache.
>> 
>> Allocations from the cache will allocate via the percpu sheaves (main or
>> spare) as long as they have no NUMA node preference. Frees will also
>> put the object back into one of the sheaves.
>> [...]
> 
> This patch showed up in linux-next today and from a *quick* glance at
> things I suspect it might be the reason why my daily next rpm builds for
> Fedora failed today like this:

Hi, thanks for the report.
> ""
> In file included from ./include/linux/spinlock.h:63,
>                  from ./include/linux/mmzone.h:8,
>                  from ./include/linux/gfp.h:7,
>                  from ./include/linux/mm.h:7,
>                  from mm/slub.c:13:
> mm/slub.c: In function ‘__pcs_replace_empty_main’:
> mm/slub.c:4727:64: error: ‘local_trylock_t’ {aka ‘__seg_gs struct spinlock’} has no member named ‘llock’; did you mean ‘lock’?
>  4727 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>       |                                                                ^~~~~
> ./include/linux/lockdep.h:392:61: note: in definition of macro ‘lockdep_assert_held’
>   392 | #define lockdep_assert_held(l)                  do { (void)(l); } while (0)
>       |                                                             ^
> [...]
> mm/slub.c:5653:29: note: in expansion of macro ‘this_cpu_ptr’
>  5653 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>       |                             ^~~~~~~~~~~~
> make[3]: *** [scripts/Makefile.build:287: mm/slub.o] Error 1
> make[2]: *** [scripts/Makefile.build:556: mm] Error 2
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builddir/build/BUILD/kernel-6.17.0-build/kernel-next-20250828/linux-6.17.0-0.0.next.20250828.432.vanilla.fc44.x86_64/Makefile:2017: .] Error 2
> make: *** [Makefile:256: __sub-make] Error 2
> ""
> 
> Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz

Oh so I assume the .config here has both LOCKDEP and PREEMPT_RT?
I tried to make lockdep_assert_held() with trylock but forgot about the RT
difference. The solution is Alexei's patch

https://lore.kernel.org/all/20250718021646.73353-2-
alexei.starovoitov@gmail.com/

Wonder if I can just fast-track it to here from that series?

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Thorsten Leemhuis]

[-- Attachment #1: Type: text/plain, Size: 2979 bytes --]

On 28.08.25 10:01, Vlastimil Babka wrote:
> On 8/28/25 09:43, Thorsten Leemhuis wrote:
>> On 27.08.25 10:26, Vlastimil Babka wrote:
>>> Specifying a non-zero value for a new struct kmem_cache_args field
>>> sheaf_capacity will setup a caching layer of percpu arrays called
>>> sheaves of given capacity for the created cache.
>>>
>>> Allocations from the cache will allocate via the percpu sheaves (main or
>>> spare) as long as they have no NUMA node preference. Frees will also
>>> put the object back into one of the sheaves.
>>> [...]
>>
>> This patch showed up in linux-next today and from a *quick* glance at
>> things I suspect it might be the reason why my daily next rpm builds for
>> Fedora failed today like this:
> 
> Hi, thanks for the report.
>> ""
>> In file included from ./include/linux/spinlock.h:63,
>>                  from ./include/linux/mmzone.h:8,
>>                  from ./include/linux/gfp.h:7,
>>                  from ./include/linux/mm.h:7,
>>                  from mm/slub.c:13:
>> mm/slub.c: In function ‘__pcs_replace_empty_main’:
>> mm/slub.c:4727:64: error: ‘local_trylock_t’ {aka ‘__seg_gs struct spinlock’} has no member named ‘llock’; did you mean ‘lock’?
>>  4727 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>       |                                                                ^~~~~
>> ./include/linux/lockdep.h:392:61: note: in definition of macro ‘lockdep_assert_held’
>>   392 | #define lockdep_assert_held(l)                  do { (void)(l); } while (0)
>>       |                                                             ^
>> [...]
>> mm/slub.c:5653:29: note: in expansion of macro ‘this_cpu_ptr’
>>  5653 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>       |                             ^~~~~~~~~~~~
>> make[3]: *** [scripts/Makefile.build:287: mm/slub.o] Error 1
>> make[2]: *** [scripts/Makefile.build:556: mm] Error 2
>> make[2]: *** Waiting for unfinished jobs....
>> make[1]: *** [/builddir/build/BUILD/kernel-6.17.0-build/kernel-next-20250828/linux-6.17.0-0.0.next.20250828.432.vanilla.fc44.x86_64/Makefile:2017: .] Error 2
>> make: *** [Makefile:256: __sub-make] Error 2
>> ""
>>
>> Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz
> 
> Oh so I assume the .config here has both LOCKDEP and PREEMPT_RT?

PREEMPT_RT yes, LOCKDEP no.

The config the failed build actually used is generated on the buildsys,
but it should be identical to the one I attached here when you process
it with olddefconfig.

> I tried to make lockdep_assert_held() with trylock but forgot about the RT
> difference. The solution is Alexei's patch
> 
> https://lore.kernel.org/all/20250718021646.73353-2-
> alexei.starovoitov@gmail.com/

Hmmm, that one didn't do the trick for me.

> Wonder if I can just fast-track it to here from that series?

Ciao, Thorsten

[-- Attachment #2: kernel-6.17.0-x86_64-rt.config --]
[-- Type: text/plain, Size: 290082 bytes --]

# x86_64
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.17.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (scripts/dummy-tools/gcc)"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=200000
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=25000
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=25000
CONFIG_LLD_VERSION=0
CONFIG_RUSTC_VERSION=108900
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_RUSTC_LLVM_VERSION=190107
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_CC_HAS_COUNTED_BY=y
CONFIG_CC_HAS_MULTIDIMENSIONAL_NONSTRING=y
CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
CONFIG_RUSTC_HAS_COERCE_POINTEE=y
CONFIG_RUSTC_HAS_SPAN_FILE=y
CONFIG_RUSTC_HAS_UNNECESSARY_TRANSMUTES=y
CONFIG_RUSTC_HAS_FILE_WITH_NUL=y
CONFIG_PAHOLE_VERSION=130
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_KERNEL_ZSTD=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_GENERIC_IRQ_STAT_SNAPSHOT=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST_IDLE=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_TIME_KUNIT_TEST=m
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
CONFIG_POSIX_AUX_CLOCKS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_BPF_PRELOAD=y
CONFIG_BPF_PRELOAD_UMD=m
CONFIG_BPF_LSM=y
# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
CONFIG_ARCH_HAS_PREEMPT_LAZY=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_LAZY is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y
CONFIG_SCHED_CLASS_EXT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
CONFIG_RCU_NOCB_CPU_CB_BOOST=y
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_V1=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_GROUP_SCHED_WEIGHT=y
CONFIG_GROUP_SCHED_BANDWIDTH=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_EXT_GROUP_SCHED=y
CONFIG_SCHED_MM_CID=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_DMEM=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_CPUSETS_V1 is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_FORCE is not set
# CONFIG_BOOT_CONFIG_EMBED is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_RINGBUFFER_KUNIT_TEST=m
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_SMALL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_FUTEX_PRIVATE_HASH=y
CONFIG_FUTEX_MPOL=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
# CONFIG_IO_URING_MOCK_FILE is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_RUST=y
CONFIG_RUSTC_VERSION_TEXT="rustc 1.89.0 (29483883e 2025-08-04) (Fedora 1.89.0-2.fc41)"
CONFIG_BINDGEN_VERSION_TEXT="bindgen 0.71.1"
CONFIG_TRACEPOINTS=y

#
# Kexec and crash features
#
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_IMA_KEXEC=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_KEXEC_JUMP=y
CONFIG_KEXEC_HANDOVER=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_DM_CRYPT=y
CONFIG_CRASH_DM_CRYPT_CONFIGS=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_POSTED_MSI=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_FRED=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_PVHVM_GUEST=y
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PV_MSR_SAFE=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
CONFIG_ACRN_GUEST=y
# CONFIG_BHYVE_GUEST is not set
CONFIG_INTEL_TDX_GUEST=y
CONFIG_CC_HAS_MARCH_NATIVE=y
# CONFIG_X86_NATIVE_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_HAVE_PAE=y
CONFIG_X86_CX8=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_BROADCAST_TLB_FLUSH=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_ACPI_MADT_WAKEUP=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
CONFIG_PERF_EVENTS_AMD_UNCORE=y
CONFIG_PERF_EVENTS_AMD_BRS=y
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_CET=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_ARCH_PKEY_BITS=4
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_X86_SGX=y
CONFIG_X86_USER_SHADOW_STACK=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_HANDOVER_PROTOCOL=y
CONFIG_EFI_MIXED=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SELECTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y
CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y
CONFIG_ARCH_SUPPORTS_KEXEC_HANDOVER=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_DEFAULT_CRASH_DUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
CONFIG_X86_BUS_LOCK_DETECT=y
# end of Processor type and features

CONFIG_CC_HAS_NAMED_AS=y
CONFIG_CC_HAS_NAMED_AS_FIXED_SANITIZERS=y
CONFIG_USE_X86_SEG_SUPPORT=y
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_PREFIX_SYMBOLS=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MITIGATION_RETHUNK=y
CONFIG_MITIGATION_UNRET_ENTRY=y
CONFIG_MITIGATION_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_MITIGATION_IBPB_ENTRY=y
CONFIG_MITIGATION_IBRS_ENTRY=y
CONFIG_MITIGATION_SRSO=y
CONFIG_MITIGATION_SLS=y
CONFIG_MITIGATION_GDS=y
CONFIG_MITIGATION_RFDS=y
CONFIG_MITIGATION_SPECTRE_BHI=y
CONFIG_MITIGATION_MDS=y
CONFIG_MITIGATION_TAA=y
CONFIG_MITIGATION_MMIO_STALE_DATA=y
CONFIG_MITIGATION_L1TF=y
CONFIG_MITIGATION_RETBLEED=y
CONFIG_MITIGATION_SPECTRE_V1=y
CONFIG_MITIGATION_SPECTRE_V2=y
CONFIG_MITIGATION_SRBDS=y
CONFIG_MITIGATION_SSB=y
CONFIG_MITIGATION_ITS=y
CONFIG_MITIGATION_TSA=y
CONFIG_ARCH_HAS_ADD_PAGES=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_HIBERNATION_COMP_LZO=y
# CONFIG_HIBERNATION_COMP_LZ4 is not set
CONFIG_HIBERNATION_DEF_COMP="lzo"
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_THERMAL_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NHLT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_EINJ_CXL=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_DPTF=y
CONFIG_DPTF_POWER=m
CONFIG_DPTF_PCH_FIVR=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_ACPI_PFRUT=m
CONFIG_ACPI_PCC=y
CONFIG_ACPI_FFH=y
CONFIG_ACPI_MRRM=y
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_CHT_DC_TI_PMIC_OPREGION=y
# CONFIG_TPS68470_PMIC_OPREGION is not set
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_AMD_PSTATE=y
CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
CONFIG_X86_AMD_PSTATE_UT=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPUFREQ_ARCH_CUR_FREQ=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_AMD_NODE=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations

CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_READONLY_MEM=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=m
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_GENERIC_MMU_NOTIFIER=y
CONFIG_KVM_ELIDE_TLB_FLUSH_IF_YOUNG=y
CONFIG_KVM_MMU_LOCKLESS_AGING=y
CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES=y
CONFIG_KVM_GUEST_MEMFD=y
CONFIG_HAVE_KVM_ARCH_GMEM_PREPARE=y
CONFIG_HAVE_KVM_ARCH_GMEM_INVALIDATE=y
CONFIG_HAVE_KVM_ARCH_GMEM_POPULATE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_X86=m
CONFIG_KVM=m
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_SW_PROTECTED_VM=y
CONFIG_KVM_INTEL=m
# CONFIG_KVM_INTEL_PROVE_VE is not set
CONFIG_X86_SGX_KVM=y
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_IOAPIC=y
CONFIG_KVM_SMM=y
CONFIG_KVM_HYPERV=y
CONFIG_KVM_XEN=y
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_X86_REQUIRED_FEATURE_ALWAYS=y
CONFIG_X86_REQUIRED_FEATURE_NOPL=y
CONFIG_X86_REQUIRED_FEATURE_CX8=y
CONFIG_X86_REQUIRED_FEATURE_CMOV=y
CONFIG_X86_REQUIRED_FEATURE_CPUID=y
CONFIG_X86_REQUIRED_FEATURE_FPU=y
CONFIG_X86_REQUIRED_FEATURE_PAE=y
CONFIG_X86_REQUIRED_FEATURE_MSR=y
CONFIG_X86_REQUIRED_FEATURE_FXSR=y
CONFIG_X86_REQUIRED_FEATURE_XMM=y
CONFIG_X86_REQUIRED_FEATURE_XMM2=y
CONFIG_X86_REQUIRED_FEATURE_LM=y
CONFIG_X86_DISABLED_FEATURE_VME=y
CONFIG_X86_DISABLED_FEATURE_K6_MTRR=y
CONFIG_X86_DISABLED_FEATURE_CYRIX_ARR=y
CONFIG_X86_DISABLED_FEATURE_CENTAUR_MCR=y
CONFIG_X86_DISABLED_FEATURE_LAM=y
CONFIG_AS_WRUSS=y
CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y
CONFIG_ARCH_HAS_DMA_OPS=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_HOTPLUG_CORE_SYNC_FULL=y
CONFIG_HOTPLUG_SPLIT_STARTUP=y
CONFIG_HOTPLUG_PARALLEL=y
CONFIG_GENERIC_IRQ_ENTRY=y
CONFIG_GENERIC_SYSCALL=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_ARCH_HAS_CPU_PASID=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAVE_EXTRA_ELF_NOTES=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_KSTACK_ERASE=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_AUTOFDO_CLANG=y
CONFIG_ARCH_SUPPORTS_PROPELLER_CLANG=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
# CONFIG_CFI_CLANG is not set
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG=y
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_EXECMEM_ROX=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_SUPPORTS_RT=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_CPU_RESCTRL=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y
CONFIG_ARCH_VMLINUX_NEEDS_RELOCS=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT=y
CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT=y
CONFIG_ARCH_HAS_CPU_ATTACK_VECTORS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_DEBUGFS=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
CONFIG_MODULE_COMPRESS_XZ=y
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_COMPRESS_ALL is not set
CONFIG_MODULE_DECOMPRESS=y
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/usr/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_WRITE_MOUNTED=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8

#
# Slab allocator options
#
CONFIG_SLUB=y
CONFIG_KVFREE_RCU_BATCHED=y
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_BUCKETS=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_RANDOM_KMALLOC_CACHES=y
# end of Slab allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_PREINIT=y
CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y
CONFIG_ARCH_WANT_HUGETLB_VMEMMAP_PREINIT=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_MEMBLOCK_KHO_SCRATCH=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE is not set
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO=y
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL is not set
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTE_PTLOCKS=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_SPLIT_PMD_PTLOCKS=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=0
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_PAGE_MAPCOUNT=y
CONFIG_PGTABLE_HAS_HUGE_LEAVES=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_PAGE_BLOCK_MAX_ORDER=10
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
# CONFIG_DEVICE_PRIVATE is not set
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_ARCH_USES_PG_ARCH_2=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LRU_GEN_WALKS_MMU=y
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_IOMMU_MM_DATA=y
CONFIG_EXECMEM=y
CONFIG_NUMA_MEMBLKS=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_HAS_USER_SHADOW_STACK=y
CONFIG_ARCH_SUPPORTS_PT_RECLAIM=y
CONFIG_PT_RECLAIM=y
CONFIG_FIND_NORMAL_PAGE=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_RECLAIM=y
# CONFIG_DAMON_LRU_SORT is not set
# CONFIG_DAMON_STAT is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_DECRYPTED=y
CONFIG_SKB_EXTENSIONS=y
CONFIG_NET_DEVMEM=y
CONFIG_NET_SHAPER=y
CONFIG_NET_CRC32C=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_IPTFS=m
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
# CONFIG_SMC_LO is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_NET_HANDSHAKE=y
CONFIG_NET_HANDSHAKE_KUNIT_TEST=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_SIGPOOL=y
CONFIG_TCP_AO=y
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_BPF_LINK=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
# CONFIG_NFT_EXTHDR_DCCP is not set
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XTABLES_COMPAT is not set

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NFT_COMPAT_ARP=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA256=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_NONE=m
# CONFIG_NET_DSA_TAG_AR9331 is not set
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_HELLCREEK=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_RTL8_4=m
# CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
# CONFIG_NET_DSA_TAG_VSC73XX_8021Q is not set
CONFIG_NET_DSA_TAG_XRS700X=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_ATALK=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_MQPRIO_LIB=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
CONFIG_NET_SCH_BPF=y
# CONFIG_NET_SCH_DUALPI2 is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_PRP_DUP_DISCARD_KUNIT_TEST=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
# CONFIG_QRTR_TUN is not set
CONFIG_QRTR_MHI=m
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# end of AX.25 network device drivers

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
# CONFIG_BT_DEBUGFS is not set
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
# CONFIG_BT_HCIUART_AML is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBCM4377=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_HCIRSI=m
CONFIG_BT_VIRTIO=m
CONFIG_BT_NXPUART=m
CONFIG_BT_INTEL_PCIE=m
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_RXGK=y
# CONFIG_RXPERF is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_CFG80211_KUNIT_TEST=m
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_KUNIT_TEST=m
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
CONFIG_NET_9P_USBG=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_MEI_PHY=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_VIRTUAL_NCI is not set
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN544_MEI=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MICROREAD_MEI=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
# CONFIG_NFC_MRVL_I2C is not set
# CONFIG_NFC_MRVL_SPI is not set
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_ST_NCI_SPI is not set
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
# CONFIG_NFC_S3FWRN5_I2C is not set
# CONFIG_NFC_S3FWRN82_UART is not set
# CONFIG_NFC_ST95HF is not set
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=m
CONFIG_NET_TEST=m

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEAER_CXL=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_EDR=y
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_NPEM=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCIE_TPH=y
CONFIG_PCI_P2PDMA=y
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_OCTEONEP=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=m
CONFIG_PCI_HYPERV_INTERFACE=m

#
# Cadence-based PCIe controllers
#
# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers

#
# PLDA-based PCIe controllers
#
# end of PLDA-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers

CONFIG_PCI_PWRCTRL=m
CONFIG_PCI_PWRCTRL_SLOT=m
CONFIG_CXL_BUS=m
CONFIG_CXL_PCI=m
# CONFIG_CXL_MEM_RAW_COMMANDS is not set
CONFIG_CXL_ACPI=m
CONFIG_CXL_PMEM=m
CONFIG_CXL_MEM=m
CONFIG_CXL_FEATURES=y
# CONFIG_CXL_EDAC_MEM_FEATURES is not set
CONFIG_CXL_PORT=m
CONFIG_CXL_SUSPEND=y
CONFIG_CXL_REGION=y
# CONFIG_CXL_REGION_INVALIDATION_TEST is not set
CONFIG_CXL_MCE=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
# CONFIG_PC104 is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_RUST_FW_LOADER_ABSTRACTIONS=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_DM_KUNIT_TEST is not set
CONFIG_DRIVER_PE_KUNIT_TEST=m
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_KUNIT=m
# CONFIG_REGMAP_BUILD is not set
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_RAM=m
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=m
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Cache Drivers
#
# end of Cache Drivers

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_FW_CS_DSP=m
CONFIG_FW_CS_DSP_KUNIT_TEST_UTILS=m
CONFIG_FW_CS_DSP_KUNIT_TEST=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
CONFIG_EFI_TEST=m
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_EFI_RCI2_TABLE=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
CONFIG_EFI_COCO_SECRET=y
# CONFIG_OVMF_DEBUG_LOG is not set
CONFIG_UNACCEPTED_MEMORY=y
CONFIG_EFI_EMBEDDED_FIRMWARE=y
CONFIG_EFI_SBAT_FILE=""
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_FWCTL=m
CONFIG_FWCTL_MLX5=m
CONFIG_FWCTL_PDS=m
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_GNSS_USB=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_MCHP48L640=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
CONFIG_MTD_INTEL_DG=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=m

#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_MXIC is not set
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_ARASAN is not set

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_SPI_NAND is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
CONFIG_MTD_NAND_ECC_MXIC=y
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_UBI_NVMEM=m
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_CDROM=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_BACKEND_LZ4=y
CONFIG_ZRAM_BACKEND_LZ4HC=y
CONFIG_ZRAM_BACKEND_ZSTD=y
CONFIG_ZRAM_BACKEND_DEFLATE=y
CONFIG_ZRAM_BACKEND_842=y
CONFIG_ZRAM_BACKEND_LZO=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_DEFLATE is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_TRACK_ENTRY_ACTIME is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_ZRAM_MULTI_COMP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RUST_NULL=m
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_UBLK=m
CONFIG_BLKDEV_UBLK_LEGACY_OPCODES=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
CONFIG_BLK_DEV_RNBD_SERVER=m
CONFIG_BLK_DEV_ZONED_LOOP=m

#
# NVME Support
#
CONFIG_NVME_KEYRING=m
CONFIG_NVME_AUTH=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
CONFIG_NVME_TCP_TLS=y
CONFIG_NVME_HOST_AUTH=y
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_DEBUGFS is not set
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_TCP=m
CONFIG_NVME_TARGET_TCP_TLS=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
CONFIG_RPMB=m
CONFIG_TI_FPC202=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=m
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_NTSYNC=m
CONFIG_TPS6594_ESM=m
CONFIG_TPS6594_PFSM=m
CONFIG_NSM=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# CONFIG_EEPROM_M24LR is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_INTEL_MEI_VSC_HW=m
CONFIG_INTEL_MEI_VSC=m
CONFIG_INTEL_MEI_HDCP=m
CONFIG_INTEL_MEI_PXP=m
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
CONFIG_BCM_VK=m
CONFIG_BCM_VK_TTY=y
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
# CONFIG_PVPANIC_PCI is not set
CONFIG_GP_PCI1XXXX=m
# CONFIG_KEBA_CP500 is not set
CONFIG_AMD_SBRMI_I2C=m
CONFIG_AMD_SBRMI_HWMON=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_LIB_KUNIT_TEST=m

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_PROTO_TEST=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPI3MR=m
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_EFCT=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_DWC=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PARPORT is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_BITMAP_FILE=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_CLUSTER is not set
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_PLATFORM_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_DM_AUDIT=y
CONFIG_DM_VDO=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_REMOTE_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_KUNIT_UAPI_TEST=m
# CONFIG_FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST is not set
CONFIG_FIREWIRE_KUNIT_PACKET_SERDES_TEST=m
CONFIG_FIREWIRE_KUNIT_SELF_ID_SEQUENCE_HELPER_TEST=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_KUNIT_OHCI_SERDES_TEST=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_OVPN=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_BAREUDP=m
CONFIG_GTP=m
CONFIG_PFCP=m
CONFIG_AMT=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NETKIT=y
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
CONFIG_MHI_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_NET_DSA_LOOP=m
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=m
# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MT7530_MDIO=m
CONFIG_NET_DSA_MT7530_MMIO=m
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MV88E6XXX_LEDS=y
# CONFIG_NET_DSA_AR9331 is not set
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
# CONFIG_NET_DSA_SJA1105 is not set
CONFIG_NET_DSA_XRS700X=m
CONFIG_NET_DSA_XRS700X_I2C=m
CONFIG_NET_DSA_XRS700X_MDIO=m
CONFIG_NET_DSA_REALTEK=m
# CONFIG_NET_DSA_KS8995 is not set
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set
# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
# CONFIG_NET_VENDOR_ALACRITECH is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_PDS_CORE=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=m
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_BNGE=m
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4_DCB=y
# CONFIG_CHELSIO_T4_FCOE is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CHELSIO_IPSEC_INLINE=m
CONFIG_CHELSIO_TLS_DEVICE=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_NET_VENDOR_CORTINA is not set
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9051=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
# CONFIG_BE2NET_HWMON is not set
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=m
# CONFIG_TSNEP_SELFTESTS is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=m
CONFIG_FUN_ETH=m
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_LIBETH=m
CONFIG_LIBIE=m
CONFIG_LIBIE_ADMINQ=m
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
# CONFIG_I40E_DCB is not set
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_ICE_HWMON=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_ICE_HWTS=y
CONFIG_FM10K=m
CONFIG_IGC=m
CONFIG_IGC_LEDS=y
CONFIG_IDPF=m
CONFIG_IDPF_SINGLEQ=y
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=m
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_OCTEON_EP=m
CONFIG_OCTEON_EP_VF=m
CONFIG_PRESTERA=m
CONFIG_PRESTERA_PCI=m
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MLX5_MACSEC=y
CONFIG_MLX5_EN_IPSEC=y
CONFIG_MLX5_EN_TLS=y
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_HW_STEERING=y
CONFIG_MLX5_SF=y
CONFIG_MLX5_SF_MANAGER=y
CONFIG_MLX5_DPLL=m
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
CONFIG_NET_VENDOR_META=y
# CONFIG_FBNIC is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_LAN743X=m
# CONFIG_LAN865X is not set
CONFIG_VCAP=y
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_MICROSOFT_MANA=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=m
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
# CONFIG_NFP_APP_ABM_NIC is not set
CONFIG_NFP_NET_IPSEC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_RMNET=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_R8169_LEDS=y
# CONFIG_RTASE is not set
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
# CONFIG_SFC_MCDI_LOGGING is not set
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=m
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not set
# CONFIG_STMMAC_PLATFORM is not set
CONFIG_DWMAC_INTEL=m
# CONFIG_STMMAC_PCI is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
# CONFIG_NET_VENDOR_SYNOPSYS is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_TEHUTI_TN40=m
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_LIBWX=m
CONFIG_NGBE=m
CONFIG_TXGBE=m
CONFIG_TXGBEVF=m
CONFIG_NGBEVF=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=m
CONFIG_XILINX_LL_TEMAC=m
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_PHY_PACKAGE=m
CONFIG_LED_TRIGGER_PHY=y
CONFIG_OPEN_ALLIANCE_HELPERS=y
CONFIG_FIXED_PHY=y
CONFIG_RUST_PHYLIB_ABSTRACTIONS=y
CONFIG_SFP=m

#
# MII PHY device drivers
#
CONFIG_AS21XXX_PHY=m
CONFIG_AIR_EN8811H_PHY=m
CONFIG_AMD_PHY=m
CONFIG_ADIN_PHY=m
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AMCC_QT2025_PHY is not set
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_AX88796B_RUST_PHY=y
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM7XXX_PHY=m
# CONFIG_BCM84881_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MARVELL_88Q2XXX_PHY=m
CONFIG_MARVELL_88X2222_PHY=m
CONFIG_MAXLINEAR_GPHY=m
CONFIG_MAXLINEAR_86110_PHY=m
CONFIG_MEDIATEK_GE_PHY=m
# CONFIG_MEDIATEK_GE_SOC_PHY is not set
CONFIG_MTK_NET_PHYLIB=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_T1S_PHY=m
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_CBTX_PHY=m
CONFIG_NXP_C45_TJA11XX_PHY=m
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_NCN26000_PHY=m
CONFIG_QCOM_NET_PHYLIB=m
CONFIG_AT803X_PHY=m
CONFIG_QCA83XX_PHY=m
CONFIG_QCA808X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_REALTEK_PHY_HWMON=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
# CONFIG_DP83TD510_PHY is not set
CONFIG_DP83TG720_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_CAN327=m
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
CONFIG_CAN_CTUCANFD=m
CONFIG_CAN_CTUCANFD_PCI=m
# CONFIG_CAN_ESD_402_PCI is not set
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
CONFIG_CAN_M_CAN_PCI=m
# CONFIG_CAN_M_CAN_PLATFORM is not set
# CONFIG_CAN_M_CAN_TCAN4X5X is not set
CONFIG_CAN_PEAK_PCIEFD=m
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB=m
# CONFIG_CAN_ETAS_ES58X is not set
CONFIG_CAN_F81604=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_MCBA_USB=m
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set

#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=m
# CONFIG_MCTP_TRANSPORT_I2C is not set
CONFIG_MCTP_TRANSPORT_USB=m
# end of MCTP Device Drivers

CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_UNIMAC=m
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MVUSB=m
# CONFIG_MDIO_MSCC_MIIM is not set
CONFIG_MDIO_REGMAP=m
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
CONFIG_PCS_MTK_LYNXI=m
# end of PCS device drivers

# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
# CONFIG_PPPOE_HASH_BITS_1 is not set
# CONFIG_PPPOE_HASH_BITS_2 is not set
CONFIG_PPPOE_HASH_BITS_4=y
# CONFIG_PPPOE_HASH_BITS_8 is not set
CONFIG_PPPOE_HASH_BITS=4
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=m
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
# CONFIG_ATH9K_COMMON_SPECTRAL is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
CONFIG_ATH6KL_DEBUG=y
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
# CONFIG_WIL6210_TRACING is not set
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
CONFIG_ATH10K_SDIO=m
CONFIG_ATH10K_USB=m
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_LEDS=y
# CONFIG_ATH10K_SPECTRAL is not set
# CONFIG_ATH10K_TRACING is not set
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_ATH11K=m
# CONFIG_ATH11K_AHB is not set
CONFIG_ATH11K_PCI=m
# CONFIG_ATH11K_DEBUG is not set
# CONFIG_ATH11K_DEBUGFS is not set
# CONFIG_ATH11K_TRACING is not set
CONFIG_ATH12K=m
# CONFIG_ATH12K_AHB is not set
# CONFIG_ATH12K_DEBUG is not set
# CONFIG_ATH12K_DEBUGFS is not set
# CONFIG_ATH12K_TRACING is not set
# CONFIG_ATH12K_COREDUMP is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m

#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options

CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_KUNIT_TESTS=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLMLD=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options

# CONFIG_WLAN_VENDOR_INTERSIL is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT792x_LIB=m
CONFIG_MT792x_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
CONFIG_MT7603E=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7915E=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921E=m
CONFIG_MT7921S=m
CONFIG_MT7921U=m
CONFIG_MT7996E=m
CONFIG_MT7925_COMMON=m
CONFIG_MT7925E=m
CONFIG_MT7925U=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
# CONFIG_RTL8192CU is not set
CONFIG_RTL8192DU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8192D_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_SDIO=m
CONFIG_RTW88_USB=m
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723X=m
CONFIG_RTW88_8703B=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_88XXA=m
CONFIG_RTW88_8821A=m
CONFIG_RTW88_8812A=m
CONFIG_RTW88_8814A=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822BS=m
CONFIG_RTW88_8822BU=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8822CS=m
CONFIG_RTW88_8822CU=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8723DS=m
CONFIG_RTW88_8723CS=m
CONFIG_RTW88_8723DU=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_8821CS=m
CONFIG_RTW88_8821CU=m
CONFIG_RTW88_8821AU=m
CONFIG_RTW88_8812AU=m
CONFIG_RTW88_8814AE=m
CONFIG_RTW88_8814AU=m
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set
CONFIG_RTW88_LEDS=y
CONFIG_RTW89=m
CONFIG_RTW89_CORE=m
CONFIG_RTW89_PCI=m
CONFIG_RTW89_USB=m
CONFIG_RTW89_8851B=m
CONFIG_RTW89_8852A=m
CONFIG_RTW89_8852B_COMMON=m
CONFIG_RTW89_8852B=m
CONFIG_RTW89_8852BT=m
CONFIG_RTW89_8852C=m
CONFIG_RTW89_8922A=m
CONFIG_RTW89_8851BE=m
CONFIG_RTW89_8851BU=m
CONFIG_RTW89_8852AE=m
CONFIG_RTW89_8852BE=m
CONFIG_RTW89_8852BU=m
CONFIG_RTW89_8852BTE=m
CONFIG_RTW89_8852CE=m
CONFIG_RTW89_8922AE=m
# CONFIG_RTW89_DEBUGMSG is not set
# CONFIG_RTW89_DEBUGFS is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
# CONFIG_WLAN_VENDOR_SILABS is not set
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
CONFIG_QTNFMAC_PCIE=m
CONFIG_MAC80211_HWSIM=m
CONFIG_VIRT_WIFI=m
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
CONFIG_IEEE802154_MCR20A=m
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
CONFIG_IOSM=m
CONFIG_MTK_T7XX=m
# end of Wireless WAN

CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_USB4_NET=m
CONFIG_HYPERV_NET=m
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KUNIT_TEST=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_APPLESPI=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_CYPRESS_SF=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=m
CONFIG_JOYSTICK_QWIIC=m
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP5=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_ILITEK=m
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MMS114=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MSG2638=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS=m
CONFIG_TOUCHSCREEN_IMAGIS=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_TOUCHSCREEN_IQS5XX=m
CONFIG_TOUCHSCREEN_IQS7211=m
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_TOUCHSCREEN_HIMAX_HX83112B=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_CS40L50_VIBRA=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX77693_HAPTIC=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=m
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IBM_PANEL is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_IQS626A=m
CONFIG_INPUT_IQS7222=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_INPUT_QNAP_MCU=m
CONFIG_INPUT_RT5120_PWRKEY=m
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
# CONFIG_RMI4_F1A is not set
# CONFIG_RMI4_F21 is not set
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_PCI1XXXX=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DFL=m
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_8250_NI is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=m
CONFIG_SERIAL_SC16IS7XX_SPI=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_N_HDLC=m
CONFIG_IPWIRELESS=m
# CONFIG_N_GSM is not set
CONFIG_NOZOMI=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_SSIF_IPMI_BMC=m
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_XIPHERA=m
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=m
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TPM2_HMAC=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_I2C_CR50=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_SVSM=m
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
CONFIG_XILLYUSB=m
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_LTC4306=m
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_ATR=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_AMD_MP2=m
CONFIG_I2C_AMD_ASF=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_CHT_WC=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NVIDIA_GPU=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_ZHAOXIN=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_CGBC=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_AMDISP=m
CONFIG_I2C_DESIGNWARE_AMDPSP=y
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_LJCA=m
CONFIG_I2C_CP2615=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PCI1XXXX=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_OFFLOAD=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_ALTERA_CORE=m
CONFIG_SPI_ALTERA_DFL=m
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_CH341=m
CONFIG_SPI_CS42L43=m
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_DLN2=m
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_INTEL=m
CONFIG_SPI_INTEL_PCI=m
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_LJCA=m
CONFIG_SPI_MICROCHIP_CORE=m
CONFIG_SPI_MICROCHIP_CORE_QSPI=m
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PCI1XXXX=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y

#
# SPI Offload triggers
#
# CONFIG_SPI_OFFLOAD_TRIGGER_ADI_UTIL_SD is not set
CONFIG_SPI_OFFLOAD_TRIGGER_PWM=m
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
CONFIG_PPS_GENERATOR=m
# CONFIG_PPS_GENERATOR_DUMMY is not set
CONFIG_PPS_GENERATOR_TIO=m

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_DP83640_PHY=m
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PTP_1588_CLOCK_VMCLOCK=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
CONFIG_PTP_1588_CLOCK_FC3W=m
CONFIG_PTP_1588_CLOCK_MOCK=m
CONFIG_PTP_1588_CLOCK_VMW=m
# CONFIG_PTP_1588_CLOCK_OCP is not set
CONFIG_PTP_DFL_TOD=m
# end of PTP clock support

#
# DPLL device support
#
CONFIG_DPLL=y
CONFIG_ZL3073X=m
CONFIG_ZL3073X_I2C=m
CONFIG_ZL3073X_SPI=m
# end of DPLL device support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AMDISP=m
CONFIG_PINCTRL_CY8C95X0=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_UPBOARD is not set
CONFIG_PINCTRL_CS42L43=m

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=m
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_INTEL_PLATFORM=m
CONFIG_PINCTRL_ALDERLAKE=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_ELKHARTLAKE=m
CONFIG_PINCTRL_EMMITSBURG=m
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_JASPERLAKE=m
CONFIG_PINCTRL_LAKEFIELD=m
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_METEORLAKE=m
CONFIG_PINCTRL_METEORPOINT=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_PINCTRL_TIGERLAKE=m
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_LEGACY=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_REGMAP=m
CONFIG_GPIO_SWNODE_UNDEFINED=y
CONFIG_GPIO_IDIO_16=m

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_ALTERA is not set
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EXAR=m
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRANITERAPIDS=m
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_POLARFIRE_SOC is not set
CONFIG_GPIO_TANGIER=m
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_AMD_FCH=m
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_F7188X is not set
CONFIG_GPIO_IT87=m
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_FXL6408=m
CONFIG_GPIO_DS4520=m
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=m
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCA9570=m
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_CGBC=m
CONFIG_GPIO_CROS_EC=m
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_ELKHARTLAKE=m
CONFIG_GPIO_LJCA=m
CONFIG_GPIO_TPS68470=m
CONFIG_GPIO_WHISKEY_COVE=m
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCI_IDIO_16=m
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_MPSSE=m
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

#
# GPIO Debugging utilities
#
# CONFIG_GPIO_SLOPPY_LOGIC_ANALYZER is not set
CONFIG_GPIO_VIRTUSER=m
# end of GPIO Debugging utilities

CONFIG_DEV_SYNC_PROBE=m
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_AMD_AXI is not set
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
CONFIG_W1_MASTER_UART=m
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=m
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SEQUENCING=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CHAGALL is not set
CONFIG_BATTERY_CW2015=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SAMSUNG_SDI=y
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
# CONFIG_AXP20X_POWER is not set
CONFIG_AXP288_CHARGER=m
CONFIG_AXP288_FUEL_GAUGE=m
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1720X=m
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX77705=m
CONFIG_CHARGER_MAX77976=m
CONFIG_CHARGER_MAX8971=m
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_RT9467=m
CONFIG_CHARGER_RT9471=m
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_CROS_PCHG=m
CONFIG_CHARGER_CROS_CONTROL=m
CONFIG_FUEL_GAUGE_STC3117=m
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_SURFACE=m
CONFIG_CHARGER_SURFACE=m
CONFIG_BATTERY_UG3105=m
CONFIG_FUEL_GAUGE_MM8013=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ASUS_ROG_RYUJIN=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_CGBC=m
CONFIG_SENSORS_CHIPCAP2=m
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_CROS_EC=m
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
# CONFIG_I8K is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GIGABYTE_WATERFORCE=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_HS3001=m
CONFIG_SENSORS_HTU31=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_ISL28022=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWERZ=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LENOVO_EC=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC2991=m
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_LTC4282 is not set
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX31760=m
CONFIG_MAX31827=m
CONFIG_SENSORS_MAX6620=m
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MAX77705=m
CONFIG_SENSORS_MC34VR500=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_MLXREG_FAN=m
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6775_I2C=m
CONFIG_SENSORS_NCT7363=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
CONFIG_SENSORS_NZXT_KRAKEN2=m
CONFIG_SENSORS_NZXT_KRAKEN3=m
CONFIG_SENSORS_NZXT_SMART2=m
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ACBEL_FSG032 is not set
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_ADP1050=m
# CONFIG_SENSORS_ADP1050_REGULATOR is not set
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
CONFIG_SENSORS_CRPS=m
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
# CONFIG_SENSORS_IBM_CFFPS is not set
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INA233=m
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT3074=m
CONFIG_SENSORS_LT3074_REGULATOR=m
CONFIG_SENSORS_LT7182S=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_LTC4286 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2856 is not set
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2891=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP2993=m
CONFIG_SENSORS_MP2975_REGULATOR=y
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_MP5920=m
# CONFIG_SENSORS_MP5990 is not set
CONFIG_SENSORS_MP9941=m
CONFIG_SENSORS_MPQ7932_REGULATOR=y
CONFIG_SENSORS_MPQ7932=m
CONFIG_SENSORS_MPQ8785=m
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=m
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_Q54SJ108A2=m
# CONFIG_SENSORS_STPDDC60 is not set
CONFIG_SENSORS_TDA38640=m
CONFIG_SENSORS_TDA38640_REGULATOR=y
CONFIG_SENSORS_TPS25990=m
CONFIG_SENSORS_TPS25990_REGULATOR=y
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_TPS546D24=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_XDP710=m
CONFIG_SENSORS_XDPE152=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PT5161L=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_QNAP_MCU_HWMON=m
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SY7636A=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC2305=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SURFACE_FAN=m
CONFIG_SENSORS_SURFACE_TEMP=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_SPD5118=m
CONFIG_SENSORS_SPD5118_DETECT=y
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ASUS_WMI=m
CONFIG_SENSORS_ASUS_EC=m
CONFIG_SENSORS_HP_WMI=m
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
# CONFIG_THERMAL_DEBUGFS is not set
# CONFIG_THERMAL_CORE_TESTING is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_PCIE_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_INTEL_TCC=y
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
CONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_BXT_PMIC_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_INTEL_TCC_COOLING=m
CONFIG_INTEL_HFI_THERMAL=y
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_CROS_EC_WATCHDOG=m
CONFIG_LENOVO_SE10_WDT=m
CONFIG_LENOVO_SE30_WDT=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_MLX_WDT=m
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ADVANTECH_EC_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_CGBC_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_EXAR_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_INTEL_OC_WATCHDOG=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_TQMX86_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
CONFIG_NIC7018_WDT=m
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CGBC=m
CONFIG_MFD_CROS_EC_DEV=m
CONFIG_MFD_CS40L50_CORE=m
CONFIG_MFD_CS40L50_I2C=m
CONFIG_MFD_CS40L50_SPI=m
CONFIG_MFD_CS42L43=m
CONFIG_MFD_CS42L43_I2C=m
CONFIG_MFD_CS42L43_SDW=m
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_DLN2=m
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_BXTWC=m
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=y
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_PMC_BXT=m
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77705=m
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_SY7636A=m
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RT4831=m
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=m
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS6594=m
CONFIG_MFD_TPS6594_I2C=m
# CONFIG_MFD_TPS6594_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=m
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=m
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_RAVE_SP_CORE is not set
CONFIG_MFD_INTEL_M10_BMC_CORE=m
CONFIG_MFD_INTEL_M10_BMC_SPI=m
CONFIG_MFD_INTEL_M10_BMC_PMCI=m
CONFIG_MFD_QNAP_MCU=m
CONFIG_MFD_UPBOARD_FPGA=m
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_NETLINK_EVENTS is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ADP5055=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AW37503=m
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BD9571MWV is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX77503=m
CONFIG_REGULATOR_MAX77857=m
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=m
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX20411=m
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PF9453=m
# CONFIG_REGULATOR_PF0900 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RAA215300=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT4803=m
CONFIG_REGULATOR_RT4831=m
CONFIG_REGULATOR_RT5120=m
CONFIG_REGULATOR_RT5190A=m
CONFIG_REGULATOR_RT5739=m
CONFIG_REGULATOR_RT5759=m
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6190=m
CONFIG_REGULATOR_RT6245=m
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
CONFIG_REGULATOR_RTQ2208=m
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_SY7636A=m
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS68470=m
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_STREAMZAP=m
CONFIG_IR_TOY=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
CONFIG_RC_XBOX_DVD=m
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_NXP_TDA9950=m
# CONFIG_CEC_CROS_EC is not set
CONFIG_CEC_GPIO=m
CONFIG_CEC_SECO=m
CONFIG_CEC_SECO_RC=y
# CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC is not set
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
# CONFIG_V4L2_FLASH_LED_CLASS is not set
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_V4L2_CCI=m
CONFIG_V4L2_CCI_I2C=m
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MGB4 is not set
CONFIG_VIDEO_SOLO6X10=m
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_DT3155 is not set
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_VIDEO_IPU3_CIO2=m
CONFIG_VIDEO_INTEL_IPU6=m
CONFIG_INTEL_VSC=m
CONFIG_IPU_BRIDGE=m
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
# CONFIG_USB_RAREMONO is not set
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
# CONFIG_USB_SI4713 is not set
# CONFIG_PLATFORM_SI4713 is not set
# CONFIG_I2C_SI4713 is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
CONFIG_VIDEO_CADENCE_CSI2TX=m

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#

#
# Mediatek media platform drivers
#

#
# Microchip Technology, Inc. media platform drivers
#

#
# Nuvoton media platform drivers
#

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#

#
# Qualcomm media platform drivers
#

#
# Raspberry Pi media platform drivers
#
# CONFIG_VIDEO_RP1_CFE is not set

#
# Renesas media platform drivers
#

#
# Rockchip media platform drivers
#

#
# Samsung media platform drivers
#

#
# STMicroelectronics media platform drivers
#

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#

#
# Verisilicon media platform drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
CONFIG_VIDEO_VIMC=m
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_OSD=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VISL=m
# CONFIG_VISL_DEBUGFS is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_CAMERA_SENSOR=y
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_CCS_PLL=m
# CONFIG_VIDEO_ALVIUM_CSI2 is not set
CONFIG_VIDEO_AR0521=m
CONFIG_VIDEO_GC0308=m
# CONFIG_VIDEO_GC0310 is not set
# CONFIG_VIDEO_GC05A2 is not set
# CONFIG_VIDEO_GC08A3 is not set
CONFIG_VIDEO_GC2145=m
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
CONFIG_VIDEO_IMX208=m
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX283=m
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX296=m
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_MAX9271_LIB=m
CONFIG_VIDEO_MT9M001=m
# CONFIG_VIDEO_MT9M111 is not set
CONFIG_VIDEO_MT9M114=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_OG01A1B=m
CONFIG_VIDEO_OV01A10=m
CONFIG_VIDEO_OV02A10=m
CONFIG_VIDEO_OV02E10=m
CONFIG_VIDEO_OV02C10=m
CONFIG_VIDEO_OV08D10=m
CONFIG_VIDEO_OV08X40=m
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV2740=m
CONFIG_VIDEO_OV4689=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5648=m
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5693=m
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV64A40=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV7640=m
# CONFIG_VIDEO_OV7670 is not set
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV8858=m
CONFIG_VIDEO_OV8865=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV9734=m
CONFIG_VIDEO_RDACM20=m
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5C73M3=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_VD55G1=m
CONFIG_VIDEO_VD56G3=m
CONFIG_VIDEO_CCS=m
CONFIG_VIDEO_ET8EK8=m

#
# Camera ISPs
#
# CONFIG_VIDEO_THP7312 is not set
# end of Camera ISPs

CONFIG_VIDEO_CAMERA_LENS=y
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9719=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV7604=m
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_LT6911UXE=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TC358746=m
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
# CONFIG_VIDEO_TW9900 is not set
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
# CONFIG_VIDEO_ADV7511_CEC is not set
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips

#
# Video serializers and deserializers
#
CONFIG_VIDEO_MAX96717=m
# end of Video serializers and deserializers

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_CXD2880 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_MN88443X is not set
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_SCREEN_INFO=y
CONFIG_VIDEO=y
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_HD44780_COMMON=m
CONFIG_HD44780=m
# CONFIG_LCD2S is not set
# CONFIG_PARPORT_PANEL is not set
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_LINEDISP=m
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=m
# CONFIG_MAX6959 is not set
# CONFIG_SEG_LED_GPIO is not set
# CONFIG_PANEL is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=y
# CONFIG_NOVA_CORE is not set
CONFIG_DRM=y

#
# DRM debugging options
#
CONFIG_DRM_WERROR=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KUNIT_TEST_HELPERS=m
CONFIG_DRM_KUNIT_TEST=m
CONFIG_DRM_SCHED_KUNIT_TEST=m
CONFIG_DRM_EXPORT_FOR_TESTS=y
# end of DRM debugging options

CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DRAW=y
CONFIG_DRM_PANIC=y
CONFIG_DRM_PANIC_FOREGROUND_COLOR=0xffffff
CONFIG_DRM_PANIC_BACKGROUND_COLOR=0x000000
# CONFIG_DRM_PANIC_DEBUG is not set
CONFIG_DRM_PANIC_SCREEN="user"
CONFIG_DRM_PANIC_SCREEN_QR_CODE=y
CONFIG_DRM_PANIC_SCREEN_QR_CODE_URL=""
CONFIG_DRM_PANIC_SCREEN_QR_VERSION=40
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_CLIENT=y
CONFIG_DRM_CLIENT_LIB=y
CONFIG_DRM_CLIENT_SELECTION=y
CONFIG_DRM_CLIENT_SETUP=y

#
# Supported DRM clients
#
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_CLIENT_LOG is not set
CONFIG_DRM_CLIENT_DEFAULT_FBDEV=y
CONFIG_DRM_CLIENT_DEFAULT="fbdev"
# end of Supported DRM clients

CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_BRIDGE_CONNECTOR=y
CONFIG_DRM_DISPLAY_DP_AUX_CEC=y
CONFIG_DRM_DISPLAY_DP_AUX_CHARDEV=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_DP_TUNNEL=y
CONFIG_DRM_DISPLAY_DSC_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_AUDIO_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_CEC_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_STATE_HELPER=y
CONFIG_DRM_TTM=m
CONFIG_DRM_EXEC=m
CONFIG_DRM_GPUVM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SUBALLOC_HELPER=m
CONFIG_DRM_SCHED=m

#
# Drivers for system framebuffers
#
CONFIG_DRM_SYSFB_HELPER=y
CONFIG_DRM_SIMPLEDRM=y
# end of Drivers for system framebuffers

#
# ARM devices
#
# end of ARM devices

CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_AMD_ISP=y
# CONFIG_DRM_AMDGPU_WERROR is not set

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration

#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_FP=y
CONFIG_DRM_AMD_DC_SI=y
# CONFIG_DEBUG_KERNEL_DC is not set
CONFIG_DRM_AMD_SECURE_DISPLAY=y
# end of Display Engine Configuration

CONFIG_HSA_AMD=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_CH7006=m
CONFIG_DRM_NOUVEAU_SIL164=m
# CONFIG_DRM_NOVA is not set
CONFIG_DRM_XE=m
CONFIG_DRM_XE_DISPLAY=y
CONFIG_DRM_XE_DP_TUNNEL=y
CONFIG_DRM_XE_FORCE_PROBE=""

#
# drm/Xe Debugging
#
# CONFIG_DRM_XE_WERROR is not set
# CONFIG_DRM_XE_DEBUG is not set
# CONFIG_DRM_XE_DEBUG_VM is not set
# CONFIG_DRM_XE_DEBUG_MEMIRQ is not set
# CONFIG_DRM_XE_DEBUG_SRIOV is not set
# CONFIG_DRM_XE_DEBUG_MEM is not set
# CONFIG_DRM_XE_KUNIT_TEST is not set
# CONFIG_DRM_XE_USERPTR_INVAL_INJECT is not set
# end of drm/Xe Debugging

#
# drm/xe Profile Guided Optimisation
#
CONFIG_DRM_XE_JOB_TIMEOUT_MAX=10000
CONFIG_DRM_XE_JOB_TIMEOUT_MIN=1
CONFIG_DRM_XE_TIMESLICE_MAX=10000000
CONFIG_DRM_XE_TIMESLICE_MIN=1
CONFIG_DRM_XE_PREEMPT_TIMEOUT=640000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MAX=10000000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MIN=1
CONFIG_DRM_XE_ENABLE_SCHEDTIMEOUT_LIMIT=y
# end of drm/xe Profile Guided Optimisation

CONFIG_DRM_VGEM=m
CONFIG_DRM_VKMS=m
CONFIG_DRM_VKMS_KUNIT_TEST=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_MKSSTATS=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_MGAG200_DISABLE_WRITECOMBINE=y
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=m
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_APPLETBDRM is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_GM12U320=m
CONFIG_DRM_PANEL_MIPI_DBI=m
# CONFIG_TINYDRM_HX8357D is not set
CONFIG_TINYDRM_ILI9163=m
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
CONFIG_TINYDRM_ILI9486=m
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
CONFIG_TINYDRM_SHARP_MEMORY=m
# CONFIG_DRM_XEN_FRONTEND is not set
CONFIG_DRM_VBOXVIDEO=m
CONFIG_DRM_GUD=m
CONFIG_DRM_ST7571_I2C=m
CONFIG_DRM_ST7586=m
CONFIG_DRM_ST7735R=m
CONFIG_DRM_SSD130X=m
CONFIG_DRM_SSD130X_I2C=m
CONFIG_DRM_SSD130X_SPI=m
CONFIG_DRM_HYPERV=m
CONFIG_DRM_PANEL_BACKLIGHT_QUIRKS=m
CONFIG_DRM_LIB_RANDOM=y
CONFIG_DRM_PRIVACY_SCREEN=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_HYPERV is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DEVICE is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_DMAMEM_HELPERS=y
CONFIG_FB_DMAMEM_HELPERS_DEFERRED=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=m
# CONFIG_BACKLIGHT_KTD2801 is not set
CONFIG_BACKLIGHT_KTZ8866=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
CONFIG_BACKLIGHT_RT4831=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_LM3509=m
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_MP3309C=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=m
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_FIRMWARE_EDID is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_TRACE_GPU_MEM is not set
# end of Graphics support

CONFIG_DRM_ACCEL=y
CONFIG_DRM_ACCEL_AMDXDNA=m
CONFIG_DRM_ACCEL_HABANALABS=m
CONFIG_DRM_ACCEL_IVPU=m
# CONFIG_DRM_ACCEL_IVPU_DEBUG is not set
CONFIG_DRM_ACCEL_QAIC=m
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_UMP=m
CONFIG_SND_UMP_LEGACY_RAWMIDI=y
CONFIG_SND_CORE_TEST=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_UTIMER=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_SEQ_UMP=y
CONFIG_SND_SEQ_UMP_CLIENT=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_PCMTEST=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1
# CONFIG_SND_HDA_CTL_DEV_ID is not set
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_ACPI=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_SENARYTECH=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_CM9825=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
CONFIG_SND_HDA_CODEC_ALC260=m
CONFIG_SND_HDA_CODEC_ALC262=m
CONFIG_SND_HDA_CODEC_ALC268=m
CONFIG_SND_HDA_CODEC_ALC269=m
CONFIG_SND_HDA_CODEC_ALC662=m
CONFIG_SND_HDA_CODEC_ALC680=m
CONFIG_SND_HDA_CODEC_ALC861=m
CONFIG_SND_HDA_CODEC_ALC861VD=m
CONFIG_SND_HDA_CODEC_ALC880=m
CONFIG_SND_HDA_CODEC_ALC882=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CS420X=m
CONFIG_SND_HDA_CODEC_CS421X=m
CONFIG_SND_HDA_CODEC_CS8409=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
CONFIG_SND_HDA_CODEC_HDMI_SIMPLE=m
CONFIG_SND_HDA_CODEC_HDMI_INTEL=m
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
CONFIG_SND_HDA_CODEC_HDMI_ATI=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA_MCP=m
CONFIG_SND_HDA_CODEC_HDMI_TEGRA=m
CONFIG_SND_HDA_CIRRUS_SCODEC=m
CONFIG_SND_HDA_CIRRUS_SCODEC_KUNIT_TEST=m
CONFIG_SND_HDA_SCODEC_CS35L41=m
CONFIG_SND_HDA_SCODEC_COMPONENT=m
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=m
CONFIG_SND_HDA_SCODEC_CS35L56=m
CONFIG_SND_HDA_SCODEC_CS35L56_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L56_SPI=m
CONFIG_SND_HDA_SCODEC_TAS2781=m
CONFIG_SND_HDA_SCODEC_TAS2781_I2C=m
CONFIG_SND_HDA_SCODEC_TAS2781_SPI=m
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_INTEL_BYT_PREFER_SOF is not set
# end of HD-Audio

# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_MIDI_V2=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_US144MKII is not set
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
# CONFIG_SND_SOC_TOPOLOGY_BUILD is not set
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=m
CONFIG_SND_SOC_CARD_KUNIT_TEST=m
CONFIG_SND_SOC_UTILS_KUNIT_TEST=m
CONFIG_SND_SOC_OPS_KUNIT_TEST=m
CONFIG_SND_SOC_ACPI=m
# CONFIG_SND_SOC_USB is not set

#
# Analog Devices
#
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# end of Analog Devices

#
# AMD
#
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=m
CONFIG_SND_SOC_AMD_ACP3x=m
CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m
CONFIG_SND_SOC_AMD_RENOIR=m
CONFIG_SND_SOC_AMD_RENOIR_MACH=m
CONFIG_SND_SOC_AMD_ACP5x=m
CONFIG_SND_SOC_AMD_VANGOGH_MACH=m
CONFIG_SND_SOC_AMD_ACP6x=m
CONFIG_SND_SOC_AMD_YC_MACH=m
CONFIG_SND_AMD_ACP_CONFIG=m
CONFIG_SND_SOC_AMD_ACP_COMMON=m
CONFIG_SND_SOC_ACPI_AMD_MATCH=m
CONFIG_SND_SOC_AMD_ACP_PDM=m
CONFIG_SND_SOC_AMD_ACP_LEGACY_COMMON=m
CONFIG_SND_SOC_AMD_ACP_I2S=m
CONFIG_SND_SOC_AMD_ACPI_MACH=m
CONFIG_SND_SOC_AMD_ACP_PCM=m
CONFIG_SND_SOC_AMD_ACP_PCI=m
CONFIG_SND_AMD_ASOC_RENOIR=m
CONFIG_SND_AMD_ASOC_REMBRANDT=m
CONFIG_SND_AMD_ASOC_ACP63=m
CONFIG_SND_AMD_ASOC_ACP70=m
CONFIG_SND_SOC_AMD_MACH_COMMON=m
CONFIG_SND_SOC_AMD_LEGACY_MACH=m
CONFIG_SND_SOC_AMD_SOF_MACH=m
CONFIG_SND_SOC_AMD_SDW_MACH_COMMON=m
CONFIG_SND_SOC_AMD_SOF_SDW_MACH=m
CONFIG_SND_SOC_AMD_LEGACY_SDW_MACH=m
CONFIG_SND_AMD_SOUNDWIRE_ACPI=m
CONFIG_SND_SOC_AMD_RPL_ACP6x=m
CONFIG_SND_SOC_AMD_ACP63_TOPLEVEL=m
CONFIG_SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_AMD_SOUNDWIRE=m
CONFIG_SND_SOC_AMD_PS=m
CONFIG_SND_SOC_AMD_PS_MACH=m
# end of AMD

#
# Apple
#
# end of Apple

#
# Atmel
#
# end of Atmel

#
# Au1x
#
# end of Au1x

#
# Broadcom
#
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# end of Broadcom

#
# Cirrus Logic
#
# end of Cirrus Logic

#
# DesignWare
#
# CONFIG_SND_DESIGNWARE_I2S is not set
# end of DesignWare

#
# Freescale
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_FSL_MICFIL is not set
# CONFIG_SND_SOC_FSL_XCVR is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of Freescale

#
# Google
#
CONFIG_SND_SOC_CHV3_I2S=m
# end of Google

#
# Hisilicon
#
# CONFIG_SND_I2S_HI6210_I2S is not set
# end of Hisilicon

#
# JZ4740
#
# end of JZ4740

#
# Kirkwood
#
# end of Kirkwood

#
# Loongson
#
# end of Loongson

#
# Intel
#
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_CATPT=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=m
CONFIG_SND_SOC_INTEL_AVS=m

#
# Intel AVS Machine drivers
#

#
# Available DSP configurations
#
# CONFIG_SND_SOC_INTEL_AVS_CARDNAME_OBSOLETE is not set
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=m
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=m
CONFIG_SND_SOC_INTEL_AVS_MACH_ES8336=m
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=m
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98927=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=m
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PCM3168A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PROBE=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5514=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5640=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=m
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=m
# end of Intel AVS Machine drivers

CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_CIRRUS_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_NUVOTON_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_BOARD_HELPERS=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=m
CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CS42L42_MACH=m
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m
CONFIG_SND_SOC_INTEL_SOF_ES8336_MACH=m
CONFIG_SND_SOC_INTEL_SOF_NAU8825_MACH=m
CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_DA7219_MACH=m
CONFIG_SND_SOC_INTEL_SOF_SSP_AMP_MACH=m
CONFIG_SND_SOC_INTEL_EHL_RT5660_MACH=m
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m
# end of Intel

#
# Mediatek
#
# CONFIG_SND_SOC_MTK_BTCVSD is not set
# end of Mediatek

#
# PXA
#
# end of PXA

#
# SoundWire (SDCA)
#
CONFIG_SND_SOC_SDCA=m
CONFIG_SND_SOC_SDCA_HID=y
CONFIG_SND_SOC_SDCA_IRQ=y
CONFIG_SND_SOC_SDCA_OPTIONAL=m
# end of SoundWire (SDCA)

#
# ST SPEAr
#
# end of ST SPEAr

#
# Spreadtrum
#
# end of Spreadtrum

#
# STMicroelectronics STM32
#
# end of STMicroelectronics STM32

#
# Tegra
#
# end of Tegra

#
# Xilinx
#
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# end of Xilinx

#
# Xtensa
#
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# end of Xtensa

CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
CONFIG_SND_SOC_SOF_ACPI=m
CONFIG_SND_SOC_SOF_ACPI_DEV=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set
CONFIG_SND_SOC_SOF=m
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=m
CONFIG_SND_SOC_SOF_AMD_COMMON=m
CONFIG_SND_SOC_SOF_AMD_RENOIR=m
CONFIG_SND_SOC_SOF_AMD_VANGOGH=m
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=m
CONFIG_SND_SOC_SOF_ACP_PROBES=m
CONFIG_SND_SOC_SOF_AMD_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_AMD_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_AMD_ACP63=m
CONFIG_SND_SOC_SOF_AMD_ACP70=m
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
CONFIG_SND_SOC_SOF_BAYTRAIL=m
CONFIG_SND_SOC_SOF_BROADWELL=m
CONFIG_SND_SOC_SOF_MERRIFIELD=m
CONFIG_SND_SOC_SOF_INTEL_SKL=m
CONFIG_SND_SOC_SOF_SKYLAKE=m
CONFIG_SND_SOC_SOF_KABYLAKE=m
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
CONFIG_SND_SOC_SOF_CANNONLAKE=m
CONFIG_SND_SOC_SOF_COFFEELAKE=m
CONFIG_SND_SOC_SOF_COMETLAKE=m
CONFIG_SND_SOC_SOF_INTEL_ICL=m
CONFIG_SND_SOC_SOF_ICELAKE=m
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
CONFIG_SND_SOC_SOF_TIGERLAKE=m
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_MTL=m
CONFIG_SND_SOC_SOF_METEORLAKE=m
CONFIG_SND_SOC_SOF_INTEL_LNL=m
CONFIG_SND_SOC_SOF_LUNARLAKE=m
CONFIG_SND_SOC_SOF_INTEL_PTL=m
CONFIG_SND_SOC_SOF_PANTHERLAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
CONFIG_SND_SOC_SOF_HDA_GENERIC=m
CONFIG_SND_SOC_SOF_HDA_MLINK=m
CONFIG_SND_SOC_SOF_HDA_LINK=y
CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y
CONFIG_SND_SOF_SOF_HDA_SDW_BPT=m
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_XTENSA=m
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1372_I2C is not set
# CONFIG_SND_SOC_ADAU1372_SPI is not set
CONFIG_SND_SOC_ADAU1373=m
# CONFIG_SND_SOC_ADAU1701 is not set
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4375 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
CONFIG_SND_SOC_AK4619=m
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
CONFIG_SND_SOC_AK5558=m
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_AUDIO_IIO_AUX=m
CONFIG_SND_SOC_AW8738=m
CONFIG_SND_SOC_AW88395_LIB=m
CONFIG_SND_SOC_AW88395=m
CONFIG_SND_SOC_AW88166=m
CONFIG_SND_SOC_AW88261=m
CONFIG_SND_SOC_AW88081=m
CONFIG_SND_SOC_AW87390=m
CONFIG_SND_SOC_AW88399=m
CONFIG_SND_SOC_BD28623=m
CONFIG_SND_SOC_BT_SCO=m
CONFIG_SND_SOC_CHV3_CODEC=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS_AMP_LIB=m
CONFIG_SND_SOC_CS_AMP_LIB_TEST=m
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_SPI=m
CONFIG_SND_SOC_CS35L41_I2C=m
CONFIG_SND_SOC_CS35L45=m
CONFIG_SND_SOC_CS35L45_SPI=m
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS35L56=m
CONFIG_SND_SOC_CS35L56_SHARED=m
CONFIG_SND_SOC_CS35L56_I2C=m
CONFIG_SND_SOC_CS35L56_SPI=m
CONFIG_SND_SOC_CS35L56_SDW=m
CONFIG_SND_SOC_CS40L50=m
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L42_SDW=m
CONFIG_SND_SOC_CS42L43=m
CONFIG_SND_SOC_CS42L43_SDW=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS42L83=m
CONFIG_SND_SOC_CS42L84=m
CONFIG_SND_SOC_CS4234=m
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS43130=m
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
CONFIG_SND_SOC_CS48L32=m
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_CS530X=m
CONFIG_SND_SOC_CS530X_I2C=m
CONFIG_SND_SOC_CX2072X=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_ES7134=m
# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES83XX_DSM_COMMON=m
CONFIG_SND_SOC_ES8311=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8323=m
CONFIG_SND_SOC_ES8326=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_ES8375=m
CONFIG_SND_SOC_ES8389=m
# CONFIG_SND_SOC_FS210X is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDA=m
CONFIG_SND_SOC_HDA=m
# CONFIG_SND_SOC_ICS43432 is not set
CONFIG_SND_SOC_IDT821034=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98520=m
CONFIG_SND_SOC_MAX98363=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98388=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX98396=m
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM5102A is not set
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_PCM6240=m
# CONFIG_SND_SOC_PEB2466 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT_SDW_COMMON=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT274=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT1011=m
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1017_SDCA_SDW=m
CONFIG_SND_SOC_RT1019=m
CONFIG_SND_SOC_RT1308=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT1318_SDW=m
CONFIG_SND_SOC_RT1320_SDW=m
CONFIG_SND_SOC_RT5514=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_I2C=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT5682S=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_DMIC_SDW=m
CONFIG_SND_SOC_RT721_SDCA_SDW=m
CONFIG_SND_SOC_RT722_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT9120 is not set
CONFIG_SND_SOC_RT9123=m
CONFIG_SND_SOC_RT9123P=m
# CONFIG_SND_SOC_RTQ9124 is not set
CONFIG_SND_SOC_RTQ9128=m
# CONFIG_SND_SOC_SDW_MOCKUP is not set
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SMA1303=m
CONFIG_SND_SOC_SMA1307=m
CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2518 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS2780=m
CONFIG_SND_SOC_TAS2781_COMLIB=m
CONFIG_SND_SOC_TAS2781_COMLIB_I2C=m
CONFIG_SND_SOC_TAS2781_FMWLIB=m
CONFIG_SND_SOC_TAS2781_I2C=m
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TAS5805M=m
CONFIG_SND_SOC_TAS6424=m
CONFIG_SND_SOC_TDA7419=m
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TFA989X is not set
CONFIG_SND_SOC_TLV320ADC3XXX=m
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
# CONFIG_SND_SOC_TLV320AIC3X_SPI is not set
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_UDA1342=m
CONFIG_SND_SOC_WCD_CLASSH=m
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD937X=m
CONFIG_SND_SOC_WCD937X_SDW=m
# CONFIG_SND_SOC_WCD938X_SDW is not set
CONFIG_SND_SOC_WCD939X=m
CONFIG_SND_SOC_WCD939X_SDW=m
CONFIG_SND_SOC_WM5102=m
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
CONFIG_SND_SOC_WM8524=m
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
CONFIG_SND_SOC_WM8731_SPI=m
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
CONFIG_SND_SOC_WM8940=m
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8961=m
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_WSA881X is not set
CONFIG_SND_SOC_WSA883X=m
CONFIG_SND_SOC_WSA884X=m
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_MAX9759=m
# CONFIG_SND_SOC_MT6351 is not set
CONFIG_SND_SOC_MT6357=m
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_MT6660 is not set
CONFIG_SND_SOC_NAU8315=m
CONFIG_SND_SOC_NAU8540=m
# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8821=m
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_NTPFW=m
CONFIG_SND_SOC_NTP8918=m
CONFIG_SND_SOC_NTP8835=m
# CONFIG_SND_SOC_TPA6130A2 is not set
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers

CONFIG_SND_SOC_SDW_UTILS=m

#
# Generic drivers
#
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# end of Generic drivers

CONFIG_SND_X86=y
CONFIG_SND_SYNTH_EMUX=m
CONFIG_SND_XEN_FRONTEND=m
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
# CONFIG_HID_APPLETB_BL is not set
# CONFIG_HID_APPLETB_KBD is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EVISION=m
CONFIG_HID_EZKEY=m
CONFIG_HID_FT260=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_GOODIX_SPI=m
# CONFIG_HID_GOOGLE_HAMMER is not set
CONFIG_HID_GOOGLE_STADIA_FF=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_KYSONA=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
# CONFIG_HID_VRC2 is not set
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LETSKETCH=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_MEGAWORLD_FF=m
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=y
CONFIG_HID_NVIDIA_SHIELD=m
CONFIG_NVIDIA_SHIELD_FF=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PICOLCD_CIR is not set
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=m
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SIGMAMICRO=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_STEAM_FF=y
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_TOPRE=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_UNIVERSAL_PIDFF=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WINWING=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2200 is not set
CONFIG_HID_MCP2221=m
CONFIG_HID_KUNIT_TEST=m
# end of Special HID drivers

#
# HID-BPF support
#
CONFIG_HID_BPF=y
# end of HID-BPF support

CONFIG_I2C_HID=y
CONFIG_I2C_HID_ACPI=m
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_CORE=m

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=m
# end of AMD SFH HID Support

#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=m
CONFIG_SURFACE_KBD=m
# end of Surface System Aggregator Module HID support

CONFIG_SURFACE_HID_CORE=m

#
# Intel THC HID Support
#
CONFIG_INTEL_THC_HID=m
CONFIG_INTEL_QUICKSPI=m
CONFIG_INTEL_QUICKI2C=m
# end of Intel THC HID Support

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_PCI_AMD=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=m
# CONFIG_USB_XHCI_SIDEBAND is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
CONFIG_USB_XEN_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set

#
# USB dual-mode controller drivers
#
CONFIG_USB_CDNS_SUPPORT=m
# CONFIG_USB_CDNS3 is not set
CONFIG_USB_CDNSP_PCI=m
# CONFIG_USB_CDNSP_GADGET is not set
# CONFIG_USB_CDNSP_HOST is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_ULPI is not set
CONFIG_USB_DWC3_HOST=y
# CONFIG_USB_DWC3_GADGET is not set
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
# CONFIG_USB_DWC3_HAPS is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_LJCA=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=100
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
CONFIG_USB_MAX3420_UDC=m
CONFIG_USB_CDNS2_UDC=m
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_MIDI2=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
# CONFIG_USB_CONFIGFS_RNDIS is not set
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
CONFIG_USB_CONFIGFS_F_FS=y
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
CONFIG_USB_CONFIGFS_F_MIDI2=y
CONFIG_USB_CONFIGFS_F_HID=y
# CONFIG_USB_CONFIGFS_F_UVC is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
CONFIG_USB_CONFIGFS_F_TCM=y

#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
# CONFIG_TYPEC_RT1711H is not set
CONFIG_TYPEC_TCPCI_MAXIM=m
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_WCOVE=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_CCG=m
CONFIG_UCSI_ACPI=m
CONFIG_UCSI_STM32G0=m
CONFIG_CROS_EC_UCSI=m
CONFIG_TYPEC_TPS6598X=m
# CONFIG_TYPEC_ANX7411 is not set
CONFIG_TYPEC_RT1719=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_TYPEC_STUSB160X=m
CONFIG_TYPEC_WUSB3801=m

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=m
CONFIG_TYPEC_MUX_GPIO_SBU=m
CONFIG_TYPEC_MUX_PI3USB30532=m
CONFIG_TYPEC_MUX_INTEL_PMC=m
CONFIG_TYPEC_MUX_IT5205=m
CONFIG_TYPEC_MUX_NB7VPQ904M=m
CONFIG_TYPEC_MUX_PS883X=m
CONFIG_TYPEC_MUX_PTN36502=m
CONFIG_TYPEC_MUX_TUSB1046=m
# CONFIG_TYPEC_MUX_WCD939X_USBSS is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
CONFIG_TYPEC_TBT_ALTMODE=m
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
CONFIG_USB_ROLES_INTEL_XHCI=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_CRYPTO is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_UHS2=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
CONFIG_MMC_TOSHIBA_PCI=m
# CONFIG_MMC_MTK is not set
CONFIG_MMC_SDHCI_XENON=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
CONFIG_LEDS_KUNIT_TEST=m

#
# LED drivers
#
CONFIG_LEDS_APU=m
CONFIG_LEDS_AW200XX=m
CONFIG_LEDS_CHT_WCOVE=m
CONFIG_LEDS_CROS_EC=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_PCA995X=m
CONFIG_LEDS_QNAP_MCU=m
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX77705=m
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_UPBOARD=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_BLINKM_MULTICOLOR=y
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_NIC78BX=m
# CONFIG_LEDS_SPI_BYTE is not set

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_LM3601X=m
# CONFIG_LEDS_RT8515 is not set
# CONFIG_LEDS_SGM3140 is not set

#
# RGB LED drivers
#
CONFIG_LEDS_KTD202X=m
CONFIG_LEDS_PWM_MULTICOLOR=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_TTY=m
CONFIG_LEDS_TRIGGER_INPUT_EVENTS=m

#
# Simatic LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
# CONFIG_SPEAKUP_SYNTH_DECEXT is not set
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
# end of Speakup console speech

CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=m
CONFIG_INFINIBAND_CXGB4=m
CONFIG_INFINIBAND_EFA=m
CONFIG_INFINIBAND_ERDMA=m
CONFIG_INFINIBAND_HFI1=m
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
# CONFIG_SDMA_VERBOSITY is not set
CONFIG_INFINIBAND_IRDMA=m
CONFIG_MANA_INFINIBAND=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_QEDR=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
CONFIG_INFINIBAND_RTRS_SERVER=m
CONFIG_INFINIBAND_OPA_VNIC=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_SCRUB=y
CONFIG_EDAC_ECS=y
CONFIG_EDAC_MEM_REPAIR=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=m
CONFIG_EDAC_PND2=m
CONFIG_EDAC_IGEN6=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=m
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX31335=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TPS6594=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
# CONFIG_RTC_DRV_RX8111 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
# CONFIG_RTC_DRV_SD2405AL is not set
CONFIG_RTC_DRV_SD3078=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
# CONFIG_RTC_DRV_DS1302 is not set
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_CROS_EC=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=m
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IDXD_BUS=m
CONFIG_INTEL_IDXD=m
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IDXD_SVM=y
CONFIG_INTEL_IDXD_PERFMON=y
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_XILINX_DMA is not set
CONFIG_XILINX_XDMA=m
CONFIG_AMD_AE4DMA=m
CONFIG_AMD_PTDMA=m
CONFIG_AMD_QDMA=m
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
CONFIG_DMABUF_HEAPS_CMA_LEGACY=y
# end of DMABUF options

CONFIG_DCA=m
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_UIO_DFL=m
CONFIG_VFIO=m
# CONFIG_VFIO_DEVICE_CDEV is not set
CONFIG_VFIO_GROUP=y
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_VIRQFD=y
# CONFIG_VFIO_DEBUGFS is not set

#
# VFIO support for PCI devices
#
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_MLX5_VFIO_PCI=m
CONFIG_PDS_VFIO_PCI=m
CONFIG_VIRTIO_VFIO_PCI=m
CONFIG_VIRTIO_VFIO_PCI_ADMIN_LEGACY=y
CONFIG_QAT_VFIO_PCI=m
# end of VFIO support for PCI devices

CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_VBOXGUEST=m
CONFIG_NITRO_ENCLAVES=m
CONFIG_ACRN_HSM=m
CONFIG_EFI_SECRET=m
CONFIG_SEV_GUEST=m
CONFIG_TDX_GUEST_DRIVER=m
CONFIG_TSM_GUEST=y
CONFIG_TSM_REPORTS=m
CONFIG_TSM_MEASUREMENTS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_ADMIN_LEGACY=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_VDPA=m
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VIRTIO_DEBUG is not set
CONFIG_VIRTIO_RTC=m
CONFIG_VIRTIO_RTC_PTP=y
CONFIG_VIRTIO_RTC_CLASS=y
CONFIG_VDPA=m
CONFIG_VDPA_SIM=m
CONFIG_VDPA_SIM_NET=m
CONFIG_VDPA_SIM_BLOCK=m
CONFIG_VDPA_USER=m
CONFIG_IFCVF=m
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=m
# CONFIG_MLX5_VDPA_STEERING_DEBUG is not set
CONFIG_VP_VDPA=m
CONFIG_ALIBABA_ENI_VDPA=m
CONFIG_SNET_VDPA=m
CONFIG_PDS_VDPA=m
CONFIG_OCTEONEP_VDPA=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_RING=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL=y

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
# CONFIG_HYPERV_VTL_MODE is not set
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
CONFIG_MSHV_ROOT=m
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_PRIVCMD_EVENTFD=y
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
CONFIG_XEN_UNPOPULATED_ALLOC=y
CONFIG_XEN_GRANT_DMA_OPS=y
CONFIG_XEN_VIRTIO=y
# CONFIG_XEN_VIRTIO_FORCE_GRANT is not set
# end of Xen driver support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
CONFIG_RTL8723BS=m

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16203 is not set
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7816 is not set
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters
# end of IIO staging drivers

# CONFIG_FB_SM750 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_INTEL_ATOMISP is not set
# CONFIG_DVB_AV7110 is not set
CONFIG_VIDEO_IPU3_IMGU=m
CONFIG_VIDEO_INTEL_IPU7=m

#
# StarFive media platform drivers
#
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
# CONFIG_VME_BUS is not set
# CONFIG_GPIB is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=m
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
# CONFIG_CROS_EC_ISHTP is not set
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_UART=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=m
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
# CONFIG_CROS_EC_DEBUGFS is not set
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC_ALTMODES=y
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_HPS_I2C=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_CHROMEOS_PRIVACY_SCREEN=m
CONFIG_CROS_TYPEC_SWITCH=m
# CONFIG_WILCO_EC is not set
CONFIG_CROS_KUNIT_EC_PROTO_TEST=m
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLX_PLATFORM=m
CONFIG_MLXREG_DPU=m
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
CONFIG_MLXREG_LC=m
CONFIG_NVSW_SN2201=m
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE3_WMI=m
CONFIG_SURFACE_3_POWER_OPREGION=m
CONFIG_SURFACE_ACPI_NOTIFY=m
CONFIG_SURFACE_AGGREGATOR_CDEV=m
CONFIG_SURFACE_AGGREGATOR_HUB=m
CONFIG_SURFACE_AGGREGATOR_REGISTRY=m
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=m
CONFIG_SURFACE_DTX=m
CONFIG_SURFACE_GPE=m
CONFIG_SURFACE_HOTPLUG=m
CONFIG_SURFACE_PLATFORM_PROFILE=m
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_SURFACE_AGGREGATOR=m
CONFIG_SURFACE_AGGREGATOR_BUS=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_WMI_LEGACY_DEVICE_NAMES is not set
CONFIG_WMI_BMOF=m
CONFIG_HUAWEI_WMI=m
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
CONFIG_NVIDIA_WMI_EC_BACKLIGHT=m
# CONFIG_XIAOMI_WMI is not set
CONFIG_GIGABYTE_WMI=m
CONFIG_ACERHDF=m
CONFIG_ACER_WIRELESS=m
CONFIG_ACER_WMI=m
CONFIG_AMD_HSMP=m

#
# AMD HSMP Driver
#
CONFIG_AMD_HSMP_ACPI=m
CONFIG_AMD_HSMP_PLAT=m
# end of AMD HSMP Driver

CONFIG_AMD_PMF=m
# CONFIG_AMD_PMF_DEBUG is not set
CONFIG_AMD_PMC=m
CONFIG_AMD_MP2_STB=y
CONFIG_AMD_HFI=y
CONFIG_AMD_3D_VCACHE=m
CONFIG_AMD_WBRF=y
CONFIG_AMD_ISP_PLATFORM=m
CONFIG_ADV_SWBUTTON=m
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
CONFIG_ASUS_WIRELESS=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_ASUS_TF103C_DOCK=m
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_ALIENWARE_WMI=m
CONFIG_ALIENWARE_WMI_LEGACY=y
CONFIG_ALIENWARE_WMI_WMAX=y
CONFIG_DCDBAS=m
CONFIG_DELL_LAPTOP=m
# CONFIG_DELL_RBU is not set
CONFIG_DELL_RBTN=m
CONFIG_DELL_PC=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
CONFIG_DELL_SMO8800=m
CONFIG_DELL_UART_BACKLIGHT=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_PRIVACY=y
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_DDV=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_WMI_SYSMAN=m
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_GPD_POCKET_FAN=m
CONFIG_X86_PLATFORM_DRIVERS_HP=y
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_HP_BIOSCFG=m
CONFIG_WIRELESS_HOTKEY=m
# CONFIG_IBM_RTL is not set
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_LED=m
CONFIG_INTEL_ATOMISP2_PM=m
CONFIG_INTEL_IFS=m
CONFIG_INTEL_SAR_INT1092=m
CONFIG_INTEL_SKL_INT3472=m
CONFIG_INTEL_PMC_CORE=m
CONFIG_INTEL_PMC_SSRAM_TELEMETRY=m
CONFIG_INTEL_PMT_CLASS=m
CONFIG_INTEL_PMT_TELEMETRY=m
CONFIG_INTEL_PMT_CRASHLOG=m
CONFIG_INTEL_PMT_DISCOVERY=m
# CONFIG_INTEL_PMT_KUNIT_TEST is not set

#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_TPMI=m
CONFIG_INTEL_SPEED_SELECT_INTERFACE=m
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_TELEMETRY=m
CONFIG_INTEL_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=m
CONFIG_INTEL_WMI_THUNDERBOLT=m

#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL_TPMI=m
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
# end of Intel Uncore Frequency Control

CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_INT0002_VGPIO=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_BXTWC_PMIC_TMU=m
CONFIG_INTEL_BYTCRC_PWRSRC=m
CONFIG_INTEL_CHTDC_TI_PWRBTN=m
CONFIG_INTEL_CHTWC_INT33FE=m
CONFIG_INTEL_ISHTP_ECLITE=m
CONFIG_INTEL_MRFLD_PWRBTN=m
CONFIG_INTEL_PUNIT_IPC=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SDSI=m
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_INTEL_TPMI_POWER_DOMAINS=m
CONFIG_INTEL_TPMI=m
CONFIG_INTEL_PLR_TPMI=m
CONFIG_INTEL_TURBO_MAX_3=y
CONFIG_INTEL_VSEC=m
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_LENOVO_WMI_HOTKEY_UTILITIES=m
CONFIG_LENOVO_WMI_CAMERA=m
CONFIG_LENOVO_YMC=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_THINKPAD_LMI=m
CONFIG_YOGABOOK=m
CONFIG_YT2_1380=m
CONFIG_LENOVO_WMI_DATA01=m
CONFIG_LENOVO_WMI_EVENTS=m
CONFIG_LENOVO_WMI_HELPERS=m
CONFIG_LENOVO_WMI_GAMEZONE=m
CONFIG_LENOVO_WMI_TUNING=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_MEEGOPAD_ANX7428=m
CONFIG_MSI_EC=m
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
CONFIG_MSI_WMI_PLATFORM=m
CONFIG_PCENGINES_APU2=m
CONFIG_PORTWELL_EC=m
CONFIG_BARCO_P50_GPIO=m
CONFIG_SAMSUNG_GALAXYBOOK=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=m
CONFIG_TOSHIBA_WMI=m
# CONFIG_ACPI_CMPC is not set
CONFIG_COMPAL_LAPTOP=m
CONFIG_LG_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_SYSTEM76_ACPI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_SERIAL_MULTI_INSTANTIATE=m
CONFIG_TOUCHSCREEN_DMI=y
CONFIG_INSPUR_PLATFORM_PROFILE=m
CONFIG_DASHARO_ACPI=m
CONFIG_X86_ANDROID_TABLETS=m
CONFIG_FW_ATTR_CLASS=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=m
CONFIG_INTEL_SCU_IPC_UTIL=m
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_SILICOM_PLATFORM is not set
CONFIG_WINMATE_FM07_KEYS=m
CONFIG_SEL3350_PLATFORM=m
CONFIG_OXP_EC=m
CONFIG_TUXEDO_NB04_WMI_AB=m
CONFIG_P2SB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI544=m
# CONFIG_COMMON_CLK_CDCE706 is not set
CONFIG_COMMON_CLK_TPS68470=m
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
CONFIG_XILINX_VCU=m
CONFIG_CLK_KUNIT_TEST=m
CONFIG_CLK_FIXED_RATE_KUNIT_TEST=m
CONFIG_CLK_GATE_KUNIT_TEST=m
CONFIG_CLK_FD_KUNIT_TEST=m
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMUFD_DRIVER=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_IOMMU_IOPF=y
CONFIG_AMD_IOMMU=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_PERF_EVENTS=y
CONFIG_IOMMUFD_DRIVER_CORE=y
CONFIG_IOMMUFD=m
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
CONFIG_VIRTIO_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_AMD=m
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
# CONFIG_SOUNDWIRE_QCOM is not set
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

CONFIG_WPCM450_SOC=m

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_QMI_HELPERS=m
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

#
# PM Domains
#

#
# Amlogic PM Domains
#
# end of Amlogic PM Domains

#
# Broadcom PM Domains
#
# end of Broadcom PM Domains

#
# i.MX PM Domains
#
# end of i.MX PM Domains

#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_AXP288=m
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_INTEL_CHT_WC=m
CONFIG_EXTCON_INTEL_MRFLD=m
CONFIG_EXTCON_LC824206XA=m
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_MAX14526 is not set
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_EXTCON_USBC_TUSB320=m
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_GTS_HELPER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m
CONFIG_IIO_BACKEND=m

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL355_SPI is not set
# CONFIG_ADXL367_SPI is not set
# CONFIG_ADXL367_I2C is not set
# CONFIG_ADXL372_SPI is not set
# CONFIG_ADXL372_I2C is not set
CONFIG_ADXL380=m
CONFIG_ADXL380_SPI=m
CONFIG_ADXL380_I2C=m
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
# CONFIG_BMI088_ACCEL is not set
CONFIG_DA280=m
# CONFIG_DA311 is not set
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_FXLS8962AF_SPI is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
# CONFIG_IIO_KX022A_SPI is not set
# CONFIG_IIO_KX022A_I2C is not set
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=m
CONFIG_MMA8452=m
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
CONFIG_MXC4005=m
CONFIG_MXC6255=m
# CONFIG_SCA3000 is not set
# CONFIG_SCA3300 is not set
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_IIO_ADC_HELPER=m
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD4000=m
CONFIG_AD4030=m
CONFIG_AD4080=m
CONFIG_AD4130=m
CONFIG_AD4170_4=m
CONFIG_AD4695=m
CONFIG_AD4851=m
CONFIG_AD7091R=m
# CONFIG_AD7091R5 is not set
CONFIG_AD7091R8=m
CONFIG_AD7124=m
# CONFIG_AD7173 is not set
CONFIG_AD7191=m
# CONFIG_AD7192 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7280 is not set
# CONFIG_AD7291 is not set
CONFIG_AD7292=m
# CONFIG_AD7298 is not set
CONFIG_AD7380=m
CONFIG_AD7405=m
# CONFIG_AD7476 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
CONFIG_AD7625=m
CONFIG_AD7766=m
# CONFIG_AD7768_1 is not set
CONFIG_AD7779=m
# CONFIG_AD7780 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD7944 is not set
CONFIG_AD7949=m
# CONFIG_AD799X is not set
CONFIG_AD9467=m
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=m
# CONFIG_CC10001_ADC is not set
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
# CONFIG_GEHC_PMC_ADC is not set
# CONFIG_HI8435 is not set
# CONFIG_HX711 is not set
# CONFIG_INA2XX_ADC is not set
CONFIG_INTEL_MRFLD_ADC=m
# CONFIG_LTC2309 is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
# CONFIG_LTC2496 is not set
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX11100 is not set
# CONFIG_MAX1118 is not set
CONFIG_MAX11205=m
CONFIG_MAX11410=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
CONFIG_MAX34408=m
# CONFIG_MAX9611 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_MCP3564 is not set
CONFIG_MCP3911=m
# CONFIG_NAU7802 is not set
# CONFIG_NCT7201 is not set
CONFIG_PAC1921=m
CONFIG_PAC1934=m
CONFIG_ROHM_BD79124=m
CONFIG_RICHTEK_RTQ6056=m
CONFIG_SD_ADC_MODULATOR=m
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC12138 is not set
CONFIG_TI_ADC128S052=m
# CONFIG_TI_ADC161S626 is not set
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS1100=m
# CONFIG_TI_ADS1119 is not set
# CONFIG_TI_ADS124S08 is not set
# CONFIG_TI_ADS1298 is not set
CONFIG_TI_ADS131E08=m
CONFIG_TI_ADS7138=m
CONFIG_TI_ADS7924=m
# CONFIG_TI_ADS7950 is not set
CONFIG_TI_ADS8344=m
# CONFIG_TI_ADS8688 is not set
CONFIG_TI_LMP92064=m
# CONFIG_TI_TLC4541 is not set
CONFIG_TI_TSC2046=m
# CONFIG_VF610_ADC is not set
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74115=m
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends

#
# Amplifiers
#
# CONFIG_AD8366 is not set
# CONFIG_ADA4250 is not set
CONFIG_HMC425=m
# end of Amplifiers

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
# CONFIG_AOSONG_AGS02MA is not set
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
# CONFIG_CCS811 is not set
# CONFIG_ENS160 is not set
# CONFIG_IAQCORE is not set
# CONFIG_MHZ19B is not set
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
# CONFIG_SCD4X is not set
# CONFIG_SEN0322 is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SPS30_SERIAL is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m
CONFIG_IIO_CROS_EC_ACTIVITY=m

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common

CONFIG_IIO_INV_SENSORS_TIMESTAMP=m

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD3530R=m
CONFIG_AD3552R_HS=m
CONFIG_AD3552R_LIB=m
CONFIG_AD3552R=m
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD9739A is not set
CONFIG_LTC2688=m
# CONFIG_AD5686_SPI is not set
# CONFIG_AD5696_I2C is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
CONFIG_AD5766=m
CONFIG_AD5770R=m
# CONFIG_AD5791 is not set
CONFIG_AD7293=m
# CONFIG_AD7303 is not set
CONFIG_AD8460=m
# CONFIG_AD8801 is not set
CONFIG_BD79703=m
CONFIG_DPOT_DAC=m
# CONFIG_DS4424 is not set
CONFIG_LTC1660=m
# CONFIG_LTC2632 is not set
CONFIG_LTC2664=m
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MAX5522=m
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
CONFIG_MCP4728=m
CONFIG_MCP4821=m
# CONFIG_MCP4922 is not set
# CONFIG_TI_DAC082S085 is not set
# CONFIG_TI_DAC5571 is not set
CONFIG_TI_DAC7311=m
# CONFIG_TI_DAC7612 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
# CONFIG_ADMV8818 is not set
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
# CONFIG_ADF4371 is not set
CONFIG_ADF4377=m
# CONFIG_ADMFM2000 is not set
# CONFIG_ADMV1013 is not set
# CONFIG_ADMV1014 is not set
# CONFIG_ADMV4420 is not set
# CONFIG_ADRF6780 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS290=m
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=m
# CONFIG_ENS210 is not set
# CONFIG_HDC100X is not set
CONFIG_HDC2010=m
# CONFIG_HDC3020 is not set
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16460 is not set
CONFIG_ADIS16475=m
# CONFIG_ADIS16480 is not set
CONFIG_ADIS16550=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_BMI270=m
CONFIG_BMI270_I2C=m
CONFIG_BMI270_SPI=m
CONFIG_BMI323=m
CONFIG_BMI323_I2C=m
# CONFIG_BMI323_SPI is not set
CONFIG_BOSCH_BNO055=m
CONFIG_BOSCH_BNO055_SERIAL=m
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
# CONFIG_KMX61 is not set
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_SMI240 is not set
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ACPI_ALS=m
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=m
CONFIG_AL3000A=m
CONFIG_AL3010=m
# CONFIG_AL3320A is not set
CONFIG_APDS9160=m
# CONFIG_APDS9300 is not set
CONFIG_APDS9306=m
# CONFIG_APDS9960 is not set
# CONFIG_AS73211 is not set
CONFIG_BH1745=m
CONFIG_BH1750=m
# CONFIG_BH1780 is not set
CONFIG_CM32181=m
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_ISL29125 is not set
# CONFIG_ISL76682 is not set
CONFIG_HID_SENSOR_ALS=m
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_JSA1212 is not set
CONFIG_ROHM_BU27034=m
CONFIG_RPR0521=m
# CONFIG_LTR390 is not set
CONFIG_LTR501=m
CONFIG_LTRF216A=m
CONFIG_LV0104CS=m
# CONFIG_MAX44000 is not set
CONFIG_MAX44009=m
# CONFIG_NOA1305 is not set
CONFIG_OPT3001=m
CONFIG_OPT4001=m
CONFIG_OPT4060=m
CONFIG_PA12203001=m
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=m
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=m
CONFIG_VEML3235=m
CONFIG_VEML6030=m
# CONFIG_VEML6040 is not set
# CONFIG_VEML6046X00 is not set
# CONFIG_VEML6070 is not set
# CONFIG_VEML6075 is not set
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
# CONFIG_AK09911 is not set
# CONFIG_ALS31300 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
# CONFIG_SI7210 is not set
# CONFIG_TI_TMAG5273 is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors

CONFIG_IIO_GTS_KUNIT_TEST=m
CONFIG_IIO_RESCALE_KUNIT_TEST=m
CONFIG_IIO_FORMAT_KUNIT_TEST=m

#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
CONFIG_MCP4018=m
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_MCP41010=m
# CONFIG_TPL0102 is not set
CONFIG_X9250=m
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
# CONFIG_ROHM_BM1390 is not set
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
# CONFIG_DLHL60D is not set
# CONFIG_DPS310 is not set
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
# CONFIG_HSC030PA is not set
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MPRLS0025PA is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_SDP500 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set
# end of Pressure sensors

#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=m
CONFIG_D3323AA=m
# CONFIG_HX9023S is not set
# CONFIG_IRSD200 is not set
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=m
# CONFIG_PING is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
CONFIG_SX9324=m
CONFIG_SX9360=m
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# CONFIG_AW96103 is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
# CONFIG_MLX90635 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
CONFIG_TMP117=m
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
CONFIG_MAX30208=m
CONFIG_MAX31856=m
CONFIG_MAX31865=m
CONFIG_MCP9600=m
# end of Temperature sensors

CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
CONFIG_NTB_AMD=m
CONFIG_NTB_IDT=m
CONFIG_NTB_INTEL=m
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
CONFIG_PWM=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_PROVIDE_GPIO is not set
# CONFIG_PWM_CLK is not set
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_DWC_CORE=m
CONFIG_PWM_DWC=m
CONFIG_PWM_GPIO=m
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
CONFIG_IRQ_MSI_LIB=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=m
# CONFIG_RESET_SIMPLE is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RESET_TI_TPS380X=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_TUSB1210 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
CONFIG_INTEL_RAPL_TPMI=m
CONFIG_IDLE_INJECT=y
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_DWC_PCIE_PMU=m
CONFIG_CXL_PMU=m
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_RAS_CEC=y
# CONFIG_RAS_CEC_DEBUG is not set
CONFIG_AMD_ATL=m
CONFIG_AMD_ATL_PRM=y
CONFIG_RAS_FMPM=m
CONFIG_USB4=m
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_ALLOC_KUNIT_TEST=m
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
# CONFIG_BTT is not set
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
# CONFIG_NVDIMM_SECURITY_TEST is not set
CONFIG_DAX=y
CONFIG_DEV_DAX_HMEM=m
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_LAYOUTS is not set
CONFIG_NVMEM_RMEM=m

#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_XILINX_CORE=m
CONFIG_FPGA_MGR_XILINX_SELECTMAP=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
# CONFIG_ALTERA_FREEZE_BRIDGE is not set
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
CONFIG_FPGA_DFL=m
CONFIG_FPGA_DFL_FME=m
CONFIG_FPGA_DFL_FME_MGR=m
CONFIG_FPGA_DFL_FME_BRIDGE=m
CONFIG_FPGA_DFL_FME_REGION=m
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=m
CONFIG_FPGA_DFL_PCI=m
CONFIG_FPGA_M10_BMC_SEC_UPDATE=m
# CONFIG_FPGA_MGR_MICROCHIP_SPI is not set
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG=m
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI=m
CONFIG_TEE=m
CONFIG_AMDTEE=m
CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
# CONFIG_MUX_ADGS1408 is not set
CONFIG_MUX_GPIO=m
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=m
CONFIG_INTEL_QEP=m
# CONFIG_INTERRUPT_CNT is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_SUPPORT_ASCII_CI=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DRAIN_INTENTS=y
CONFIG_XFS_LIVE_HOOKS=y
CONFIG_XFS_MEMORY_BUFS=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_SCRUB_STATS is not set
# CONFIG_XFS_ONLINE_REPAIR is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_EXPERIMENTAL is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_BCACHEFS_FS=m
CONFIG_BCACHEFS_QUOTA=y
# CONFIG_BCACHEFS_ERASURE_CODING is not set
CONFIG_BCACHEFS_POSIX_ACL=y
# CONFIG_BCACHEFS_DEBUG is not set
# CONFIG_BCACHEFS_TESTS is not set
# CONFIG_BCACHEFS_LOCK_TIME_STATS is not set
# CONFIG_BCACHEFS_NO_LATENCY_ACCT is not set
CONFIG_BCACHEFS_SIX_OPTIMISTIC_SPIN=y
# CONFIG_BCACHEFS_PATH_TRACEPOINTS is not set
# CONFIG_BCACHEFS_TRANS_KMALLOC_TRACE is not set
# CONFIG_BCACHEFS_ASYNC_OBJECT_LISTS is not set
CONFIG_MEAN_AND_VARIANCE_UNIT_TEST=m
CONFIG_ZONEFS_FS=m
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_DAX=y
CONFIG_FUSE_PASSTHROUGH=y
CONFIG_FUSE_IO_URING=y
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
# CONFIG_OVERLAY_FS_DEBUG is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
# CONFIG_NETFS_DEBUG is not set
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_TMPFS_QUOTA=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
# CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set
CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_COMP_CACHE_FULL is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_RESCTRL_FS=y
CONFIG_RESCTRL_FS_PSEUDO_LOCK=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_BACKED_BY_FILE=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ZIP_DEFLATE=y
CONFIG_EROFS_FS_ZIP_ZSTD=y
CONFIG_EROFS_FS_ZIP_ACCEL=y
CONFIG_EROFS_FS_ONDEMAND=y
# CONFIG_EROFS_FS_PCPU_KTHREAD is not set
CONFIG_VBOXSF_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set
CONFIG_NFSD_V4_DELEG_TIMESTAMPS=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_COMMON_LOCALIO_SUPPORT=m
CONFIG_NFS_LOCALIO=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA=y
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2=y
CONFIG_RPCSEC_GSS_KRB5_KUNIT_TEST=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
CONFIG_CIFS_FSCACHE=y
# CONFIG_CIFS_COMPRESSION is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_NLS_UCS2_UTILS=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_KUNIT_TEST=m
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_HAVE_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_PROC_MEM_ALWAYS_FORCE=y
# CONFIG_PROC_MEM_FORCE_PTRACE is not set
# CONFIG_PROC_MEM_NO_FORCE is not set
CONFIG_SECURITY=y
CONFIG_HAS_SECURITY_AUDIT=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SELINUX_DEBUG is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/usr/lib/systemd/systemd"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_SECURITY_IPE=y
CONFIG_IPE_BOOT_POLICY=""
CONFIG_IPE_POLICY_SIG_SECONDARY_KEYRING=y
CONFIG_IPE_POLICY_SIG_PLATFORM_KEYRING=y

#
# IPE Trust Providers
#
CONFIG_IPE_PROP_DM_VERITY=y
CONFIG_IPE_PROP_DM_VERITY_SIGNATURE=y
CONFIG_IPE_PROP_FS_VERITY=y
# end of IPE Trust Providers

CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_MACHINE_KEYRING=y
CONFIG_INTEGRITY_CA_MACHINE_KEYRING=y
CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX=y
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_KEXEC=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha256"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_IMA_KEXEC_EXTRA_MEMORY_KB=0
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,integrity,selinux,bpf,landlock,ipe"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_CC_HAS_SANCOV_STACK_DEPTH_CALLBACK=y
# CONFIG_KSTACK_ERASE is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

#
# Bounds checking
#
CONFIG_FORTIFY_SOURCE=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_DEFAULT_ON=y
# end of Bounds checking

#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures

CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_HKDF=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_SELFTESTS=y
# CONFIG_CRYPTO_SELFTESTS_FULL is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_KRB5ENC=m
CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=m
CONFIG_CRYPTO_CURVE25519=m
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_GENIV=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_JITTERENTROPY_MEMSIZE_2=y
# CONFIG_CRYPTO_JITTERENTROPY_MEMSIZE_128 is not set
# CONFIG_CRYPTO_JITTERENTROPY_MEMSIZE_1024 is not set
# CONFIG_CRYPTO_JITTERENTROPY_MEMSIZE_8192 is not set
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
# CONFIG_CRYPTO_JITTERENTROPY_TESTINTERFACE is not set
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface

#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
CONFIG_CRYPTO_CURVE25519_X86=m
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
# CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64 is not set
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
CONFIG_CRYPTO_NHPOLY1305_SSE2=m
CONFIG_CRYPTO_NHPOLY1305_AVX2=m
CONFIG_CRYPTO_POLYVAL_CLMUL_NI=m
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
# end of Accelerated Cryptographic Algorithms for CPU (x86)

CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_4XXX=m
CONFIG_CRYPTO_DEV_QAT_420XX=m
CONFIG_CRYPTO_DEV_QAT_6XXX=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
# CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION is not set
CONFIG_CRYPTO_DEV_IAA_CRYPTO=m
CONFIG_CRYPTO_DEV_IAA_CRYPTO_STATS=y
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SECONDARY_TRUSTED_KEYRING_SIGNED_BY_BUILTIN is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_CRYPTO_KRB5=m
# CONFIG_CRYPTO_KRB5_SELFTESTS is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_PACKING_KUNIT_TEST=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_CRC16=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_T10DIF_ARCH=y
CONFIG_CRC32=y
CONFIG_CRC32_ARCH=y
CONFIG_CRC64=y
CONFIG_CRC64_ARCH=y
CONFIG_CRC_OPTIMIZATIONS=y
CONFIG_CRC_KUNIT_TEST=m
# CONFIG_CRC_BENCHMARK is not set

#
# Crypto library routines
#
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_AESCFB=y
CONFIG_CRYPTO_LIB_AESGCM=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519_INTERNAL=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_MD5=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_ARCH=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA1_ARCH=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SHA256_ARCH=y
CONFIG_CRYPTO_LIB_SHA512=y
CONFIG_CRYPTO_LIB_SHA512_ARCH=y
CONFIG_CRYPTO_LIB_MD5_KUNIT_TEST=m
CONFIG_CRYPTO_LIB_POLY1305_KUNIT_TEST=m
CONFIG_CRYPTO_LIB_SHA1_KUNIT_TEST=m
CONFIG_CRYPTO_LIB_SHA256_KUNIT_TEST=m
CONFIG_CRYPTO_LIB_SHA512_KUNIT_TEST=m
CONFIG_CRYPTO_LIB_BENCHMARK_VISIBLE=y
# CONFIG_CRYPTO_LIB_BENCHMARK is not set
CONFIG_CRYPTO_BLAKE2S_X86=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
# end of Crypto library routines

CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_ARM64=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_RISCV=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_INTERVAL_TREE_SPAN_ITER=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS_HELPERS=y
CONFIG_NEED_SG_DMA_FLAGS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
# CONFIG_SWIOTLB_DYNAMIC is not set
CONFIG_DMA_NEED_SYNC=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y
CONFIG_DMA_NUMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT=y
CONFIG_VDSO_GETRANDOM=y
CONFIG_GENERIC_VDSO_DATA_STORE=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# CONFIG_LWQ_TEST is not set
# end of Library routines

CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=m
CONFIG_FIRMWARE_TABLE=y
CONFIG_UNION_FIND=y
CONFIG_MIN_HEAP=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=3
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_BUGVERBOSE_DETAILED is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_ULEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_COMPRESSED_ZSTD is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_OBJTOOL=y
# CONFIG_OBJTOOL_WERROR is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_ARCH_HAS_EARLY_DEBUG=y
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# CONFIG_DEBUG_NET_SMALL_RTNL is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_ARCH_HAS_PTDUMP=y
CONFIG_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_PER_VMA_LOCK_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VFS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_MEM_ALLOC_PROFILING is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
# CONFIG_KFENCE_DEFERRABLE is not set
# CONFIG_KFENCE_STATIC_KEYS is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=m
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
# CONFIG_HARDLOCKUP_DETECTOR_BUDDY is not set
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_NMI_CHECK_CPU is not set
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CLOSURES is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_CHK_RDR_STATE is not set
# CONFIG_RCU_TORTURE_TEST_LOG_CPU is not set
# CONFIG_RCU_TORTURE_TEST_LOG_GP is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FREGS=y
CONFIG_HAVE_FTRACE_GRAPH_FUNC=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_REGS_HAVING_PT_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_GRAPH_RETVAL=y
# CONFIG_FUNCTION_GRAPH_RETADDR is not set
CONFIG_FUNCTION_TRACE_ARGS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FPROBE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_FPROBE_EVENTS=y
CONFIG_PROBE_EVENTS_BTF_ARGS=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_EPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_TRACE_EVAL_MAP_FILE=y
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_RV_MON_EVENTS=y
CONFIG_RV_MON_MAINTENANCE_EVENTS=y
CONFIG_DA_MON_EVENTS_ID=y
CONFIG_RV=y
CONFIG_RV_PER_TASK_MONITORS=2
CONFIG_RV_MON_WWNR=y
# CONFIG_RV_MON_RTAPP is not set
CONFIG_RV_REACTORS=y
CONFIG_RV_REACT_PRINTK=y
CONFIG_RV_REACT_PANIC=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
# CONFIG_KUNIT_FAULT_TEST is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
CONFIG_KUNIT_ALL_TESTS=m
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
CONFIG_KUNIT_AUTORUN_ENABLED=y
CONFIG_KUNIT_DEFAULT_TIMEOUT=300
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
CONFIG_CPUMASK_KUNIT_TEST=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
CONFIG_TEST_SORT=m
# CONFIG_TEST_DIV64 is not set
# CONFIG_TEST_MULDIV64 is not set
CONFIG_TEST_IOV_ITER=m
CONFIG_KPROBES_SANITY_TEST=m
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_PRINTF_KUNIT_TEST=m
CONFIG_SCANF_KUNIT_TEST=m
CONFIG_SEQ_BUF_KUNIT_TEST=m
CONFIG_STRING_KUNIT_TEST=m
CONFIG_STRING_HELPERS_KUNIT_TEST=m
CONFIG_FFS_KUNIT_TEST=m
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_PARMAN is not set
CONFIG_TEST_LKM=m
# CONFIG_TEST_BITOPS is not set
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_BPF=m
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
CONFIG_BITFIELD_KUNIT=m
CONFIG_CHECKSUM_KUNIT=m
CONFIG_UTIL_MACROS_KUNIT=m
CONFIG_HASH_KUNIT_TEST=m
CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_KFIFO_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
CONFIG_HASHTABLE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
CONFIG_CMDLINE_KUNIT_TEST=m
CONFIG_BITS_TEST=m
CONFIG_SLUB_KUNIT_TEST=m
CONFIG_RATIONAL_KUNIT_TEST=m
CONFIG_MEMCPY_KUNIT_TEST=m
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=m
CONFIG_RANDSTRUCT_KUNIT_TEST=m
CONFIG_STACKINIT_KUNIT_TEST=m
CONFIG_FORTIFY_KUNIT_TEST=m
CONFIG_SIPHASH_KUNIT_TEST=m
CONFIG_USERCOPY_KUNIT_TEST=m
CONFIG_BLACKHOLE_DEV_KUNIT_TEST=m
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
CONFIG_TEST_KMOD=m
# CONFIG_TEST_KALLSYMS is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
# CONFIG_TEST_OBJPOOL is not set
# CONFIG_TEST_KEXEC_HANDOVER is not set
CONFIG_RATELIMIT_KUNIT_TEST=m
CONFIG_INT_POW_KUNIT_TEST=m
CONFIG_INT_SQRT_KUNIT_TEST=m
CONFIG_INT_LOG_KUNIT_TEST=m
CONFIG_GCD_KUNIT_TEST=m
CONFIG_PRIME_NUMBERS_KUNIT_TEST=m
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# CONFIG_RUST_DEBUG_ASSERTIONS is not set
CONFIG_RUST_OVERFLOW_CHECKS=y
# CONFIG_RUST_BUILD_ASSERT_ALLOW is not set
# end of Rust hacking
# end of Kernel hacking

CONFIG_IO_URING_ZCRX=y

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Vlastimil Babka]

On 8/28/25 10:53, Thorsten Leemhuis wrote:
> On 28.08.25 10:01, Vlastimil Babka wrote:
>> On 8/28/25 09:43, Thorsten Leemhuis wrote:
>>> On 27.08.25 10:26, Vlastimil Babka wrote:
>>>> Specifying a non-zero value for a new struct kmem_cache_args field
>>>> sheaf_capacity will setup a caching layer of percpu arrays called
>>>> sheaves of given capacity for the created cache.
>>>>
>>>> Allocations from the cache will allocate via the percpu sheaves (main or
>>>> spare) as long as they have no NUMA node preference. Frees will also
>>>> put the object back into one of the sheaves.
>>>> [...]
>>>
>>> This patch showed up in linux-next today and from a *quick* glance at
>>> things I suspect it might be the reason why my daily next rpm builds for
>>> Fedora failed today like this:
>> 
>> Hi, thanks for the report.
>>> ""
>>> In file included from ./include/linux/spinlock.h:63,
>>>                  from ./include/linux/mmzone.h:8,
>>>                  from ./include/linux/gfp.h:7,
>>>                  from ./include/linux/mm.h:7,
>>>                  from mm/slub.c:13:
>>> mm/slub.c: In function ‘__pcs_replace_empty_main’:
>>> mm/slub.c:4727:64: error: ‘local_trylock_t’ {aka ‘__seg_gs struct spinlock’} has no member named ‘llock’; did you mean ‘lock’?
>>>  4727 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>>       |                                                                ^~~~~
>>> ./include/linux/lockdep.h:392:61: note: in definition of macro ‘lockdep_assert_held’
>>>   392 | #define lockdep_assert_held(l)                  do { (void)(l); } while (0)
>>>       |                                                             ^
>>> [...]
>>> mm/slub.c:5653:29: note: in expansion of macro ‘this_cpu_ptr’
>>>  5653 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>>       |                             ^~~~~~~~~~~~
>>> make[3]: *** [scripts/Makefile.build:287: mm/slub.o] Error 1
>>> make[2]: *** [scripts/Makefile.build:556: mm] Error 2
>>> make[2]: *** Waiting for unfinished jobs....
>>> make[1]: *** [/builddir/build/BUILD/kernel-6.17.0-build/kernel-next-20250828/linux-6.17.0-0.0.next.20250828.432.vanilla.fc44.x86_64/Makefile:2017: .] Error 2
>>> make: *** [Makefile:256: __sub-make] Error 2
>>> ""
>>>
>>> Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz
>> 
>> Oh so I assume the .config here has both LOCKDEP and PREEMPT_RT?
> 
> PREEMPT_RT yes, LOCKDEP no.

Ah right the compiler evaluates that assert param even if not enabled.
> The config the failed build actually used is generated on the buildsys,
> but it should be identical to the one I attached here when you process
> it with olddefconfig.
> 
>> I tried to make lockdep_assert_held() with trylock but forgot about the RT
>> difference. The solution is Alexei's patch
>> 
>> https://lore.kernel.org/all/20250718021646.73353-2-
>> alexei.starovoitov@gmail.com/
> 
> Hmmm, that one didn't do the trick for me.

Yeah it won't help alone, the lockdep_assert_held() calls in this patch will
also need to remove the ".llock" part. But if we did that without Alexei's
patch, it would fix RT but break !RT.

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Vlastimil Babka]

On 8/28/25 10:01, Vlastimil Babka wrote:
> On 8/28/25 09:43, Thorsten Leemhuis wrote:
>> On 27.08.25 10:26, Vlastimil Babka wrote:
>>> Specifying a non-zero value for a new struct kmem_cache_args field
>>> sheaf_capacity will setup a caching layer of percpu arrays called
>>> sheaves of given capacity for the created cache.
>>> 
>>> Allocations from the cache will allocate via the percpu sheaves (main or
>>> spare) as long as they have no NUMA node preference. Frees will also
>>> put the object back into one of the sheaves.
>>> [...]
>> 
>> This patch showed up in linux-next today and from a *quick* glance at
>> things I suspect it might be the reason why my daily next rpm builds for
>> Fedora failed today like this:
> 
> Hi, thanks for the report.
>> ""
>> In file included from ./include/linux/spinlock.h:63,
>>                  from ./include/linux/mmzone.h:8,
>>                  from ./include/linux/gfp.h:7,
>>                  from ./include/linux/mm.h:7,
>>                  from mm/slub.c:13:
>> mm/slub.c: In function ‘__pcs_replace_empty_main’:
>> mm/slub.c:4727:64: error: ‘local_trylock_t’ {aka ‘__seg_gs struct spinlock’} has no member named ‘llock’; did you mean ‘lock’?
>>  4727 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>       |                                                                ^~~~~
>> ./include/linux/lockdep.h:392:61: note: in definition of macro ‘lockdep_assert_held’
>>   392 | #define lockdep_assert_held(l)                  do { (void)(l); } while (0)
>>       |                                                             ^
>> [...]
>> mm/slub.c:5653:29: note: in expansion of macro ‘this_cpu_ptr’
>>  5653 |         lockdep_assert_held(this_cpu_ptr(&s->cpu_sheaves->lock.llock));
>>       |                             ^~~~~~~~~~~~
>> make[3]: *** [scripts/Makefile.build:287: mm/slub.o] Error 1
>> make[2]: *** [scripts/Makefile.build:556: mm] Error 2
>> make[2]: *** Waiting for unfinished jobs....
>> make[1]: *** [/builddir/build/BUILD/kernel-6.17.0-build/kernel-next-20250828/linux-6.17.0-0.0.next.20250828.432.vanilla.fc44.x86_64/Makefile:2017: .] Error 2
>> make: *** [Makefile:256: __sub-make] Error 2
>> ""
>> 
>> Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz
> 
> Oh so I assume the .config here has both LOCKDEP and PREEMPT_RT?
> I tried to make lockdep_assert_held() with trylock but forgot about the RT
> difference. The solution is Alexei's patch
> 
> https://lore.kernel.org/all/20250718021646.73353-2-
> alexei.starovoitov@gmail.com/
> 
> Wonder if I can just fast-track it to here from that series?

Did that for tomorrow's -next

Re: [PATCH v6 02/10] slab: add opt-in caching layer of percpu sheaves

[Thorsten Leemhuis]

On 28.08.25 17:00, Vlastimil Babka wrote:
> On 8/28/25 10:01, Vlastimil Babka wrote:
>> On 8/28/25 09:43, Thorsten Leemhuis wrote:
>>> On 27.08.25 10:26, Vlastimil Babka wrote:
>>>> Specifying a non-zero value for a new struct kmem_cache_args field
>>>> sheaf_capacity will setup a caching layer of percpu arrays called
>>>> sheaves of given capacity for the created cache.
>>>> [...]
>>>
>>> This patch showed up in linux-next today and from a *quick* glance at
>>> things I suspect it might be the reason why my daily next rpm builds for
>>> Fedora failed today like this:
>>
>> Hi, thanks for the report.
> [...]
>>> Full log: https://download.copr.fedorainfracloud.org/results/@kernel-vanilla/next/fedora-rawhide-x86_64/09498568-next-next-all/builder-live.log.gz
>>
>> Oh so I assume the .config here has both LOCKDEP and PREEMPT_RT?
>> I tried to make lockdep_assert_held() with trylock but forgot about the RT
>> difference. The solution is Alexei's patch
>>
>> https://lore.kernel.org/all/20250718021646.73353-2-
>> alexei.starovoitov@gmail.com/
>>
>> Wonder if I can just fast-track it to here from that series?
> 
> Did that for tomorrow's -next

Thx, today's -next build worked smoothly! Ciao, Thorsten

Re: [PATCH v6 08/10] mm, vma: use percpu sheaves for vm_area_struct cache

[Lorenzo Stoakes]

On Wed, Aug 27, 2025 at 10:26:40AM +0200, Vlastimil Babka wrote:
> Create the vm_area_struct cache with percpu sheaves of size 32 to
> improve its performance.
>
> Reviewed-by: Suren Baghdasaryan <surenb@google.com>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
>  mm/vma_init.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/mm/vma_init.c b/mm/vma_init.c
> index 8e53c7943561e7324e7992946b4065dec1149b82..52c6b55fac4519e0da39ca75ad018e14449d1d95 100644
> --- a/mm/vma_init.c
> +++ b/mm/vma_init.c
> @@ -16,6 +16,7 @@ void __init vma_state_init(void)
>  	struct kmem_cache_args args = {
>  		.use_freeptr_offset = true,
>  		.freeptr_offset = offsetof(struct vm_area_struct, vm_freeptr),
> +		.sheaf_capacity = 32,

This breaks the VMA tests.

Please also update tools/testing/vma/vma_internal.h to add this field
(probably actually at the commit that adds the field in mainline :P)

I do wish we could have these tests be run by a bot :/ seems today I am
that bot :)

>  	};
>
>  	vm_area_cachep = kmem_cache_create("vm_area_struct",
>
> --
> 2.51.0
>
>
>