* Re: 2.6.23-mm1 [not found] <20071011213126.cf92efb7.akpm@linux-foundation.org> @ 2007-10-12 20:38 ` Laurent Riffard 2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton 2007-10-14 22:34 ` 2.6.23-mm1: BUG in reiserfs_delete_xattrs Laurent Riffard 1 sibling, 1 reply; 15+ messages in thread From: Laurent Riffard @ 2007-10-12 20:38 UTC (permalink / raw) To: Andrew Morton, linux-kernel, reiserfs-devel [-- Attachment #1: Type: text/plain, Size: 1634 bytes --] Le 12.10.2007 06:31, Andrew Morton a écrit : > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ Mounting reiser4 fs does hang with these messages in dmesg: Loading Reiser4. See www.namesys.com for a description of Reiser4. reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]: WARNING: Truncated single page read: 4096 Hitting SysRq-W produces this output: SysRq : Show Blocked State task PC stack pid father mount D c20d6b70 1592 2509 2495 c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 Call Trace: [<c02ac14e>] io_schedule+0xe/0x16 [<c0141b7b>] sync_page+0x36/0x3a [<c02ac344>] __wait_on_bit+0x36/0x5d [<c0141d6e>] wait_on_page_bit+0x55/0x5b [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4] [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4] [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4] [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4] [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4] [<c015f731>] get_sb_bdev+0xe0/0x11e [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4] [<c015f336>] vfs_kern_mount+0x3b/0x76 [<c0171621>] do_mount+0x68a/0x7a3 [<c01717a2>] sys_mount+0x68/0xa4 [<c0103dee>] sysenter_past_esp+0x5f/0x99 ======================= .config attached. Feel free to ask for more info. ~~ laurent [-- Attachment #2: config-2.6.23-mm1 --] [-- Type: text/plain, Size: 48112 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.23-mm1 # Fri Oct 12 20:44:24 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_KPAGEMAP=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=m CONFIG_X86_MCE_P4THERMAL=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_X86_REBOOTFIXUPS=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m # CONFIG_X86_CPUID is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_2G_OPT is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_X86_PAE is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_COMPAT_VDSO is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="/dev/hdb6" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_DEBUG=y # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m # CONFIG_IP_NF_RAW is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m # CONFIG_IP_NF_ARP_MANGLE is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set # CONFIG_ATM_LANE is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m # CONFIG_NET_SCH_ATM is not set CONFIG_NET_SCH_PRIO=m # CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m # CONFIG_NET_SCH_NETEM is not set CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_IPT is not set # CONFIG_NET_ACT_NAT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_ATA_GENERIC=m # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set CONFIG_PATA_VIA=m # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=m CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m # CONFIG_FIREWIRE_SBP2 is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # Controllers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=m # # Protocols # CONFIG_IEEE1394_VIDEO1394=m # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=m # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_USB_ATMEL is not set # CONFIG_ATMEL is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_ATM_DRIVERS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m CONFIG_PPPOATM=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_PS2_ALPS is not set # CONFIG_MOUSE_PS2_LOGIPS2PP is not set # CONFIG_MOUSE_PS2_SYNAPTICS is not set # CONFIG_MOUSE_PS2_LIFEBOOK is not set # CONFIG_MOUSE_PS2_TRACKPOINT is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_WISTRON_BTNS is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_FM801 is not set # # Character devices # CONFIG_VT=y # CONFIG_VT_UNICODE is not set CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_FIX_EARLYCON_MEM=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_PNP=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set CONFIG_SENSORS_LM80=m # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set CONFIG_SENSORS_W83781D=m # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # CONFIG_WATCHDOG is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_W9966 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STK11XX is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=m # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=m # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y # CONFIG_FB_HECUBA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_BACKLIGHT is not set # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_AC97_CODEC=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set # # ISA devices # # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_SC6000 is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set CONFIG_SND_ENS1371=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # # USB devices # CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GOTEMP is not set # # USB DSL modem support # CONFIG_USB_ATM=m # CONFIG_USB_SPEEDTOUCH is not set # CONFIG_USB_CXACRU is not set CONFIG_USB_UEAGLEATM=m # CONFIG_USB_XUSBATM is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=m CONFIG_EDAC_AMD76X=m # CONFIG_EDAC_E7XXX is not set # CONFIG_EDAC_E752X is not set # CONFIG_EDAC_I82875P is not set # CONFIG_EDAC_I82975X is not set # CONFIG_EDAC_I3000 is not set # CONFIG_EDAC_I82860 is not set # CONFIG_EDAC_R82600 is not set # CONFIG_EDAC_I5000 is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_VIRTUALIZATION is not set # # Userspace I/O # # CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT2_FS_XIP=y CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISER4_FS=m # CONFIG_REISER4_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y # CONFIG_REISERFS_FS_POSIX_ACL is not set # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Layered filesystems # CONFIG_ECRYPT_FS=m # CONFIG_UNION_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set # CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=m # CONFIG_KPROBES is not set # CONFIG_MARKERS is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_SLAB_LEAK=y CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LOCKING_API_SELFTESTS=y CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y # CONFIG_PROFILE_LIKELY is not set # CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DEBUG_SYNCHRO_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set # CONFIG_UNWIND_INFO is not set # CONFIG_KGDB is not set # CONFIG_KGDB_ATTACH_WAIT is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # # Page alloc debug is incompatible with Software Suspend on i386 # CONFIG_DEBUG_RODATA=y CONFIG_4KSTACKS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_586 is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1 2007-10-12 20:38 ` 2.6.23-mm1 Laurent Riffard @ 2007-10-12 21:00 ` Andrew Morton 2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard 2007-10-15 16:13 ` 2.6.23-mm1 Zan Lynx 0 siblings, 2 replies; 15+ messages in thread From: Andrew Morton @ 2007-10-12 21:00 UTC (permalink / raw) To: Laurent Riffard; +Cc: linux-kernel, reiserfs-devel, Jens Axboe On Fri, 12 Oct 2007 22:38:25 +0200 Laurent Riffard <laurent.riffard@free.fr> wrote: > Le 12.10.2007 06:31, Andrew Morton a écrit : > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > Mounting reiser4 fs does hang with these messages in dmesg: > > Loading Reiser4. See www.namesys.com for a description of Reiser4. > reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]: > WARNING: Truncated single page read: 4096 > > Hitting SysRq-W produces this output: > > SysRq : Show Blocked State > task PC stack pid father > mount D c20d6b70 1592 2509 2495 > c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 > c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 > c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 > Call Trace: > [<c02ac14e>] io_schedule+0xe/0x16 > [<c0141b7b>] sync_page+0x36/0x3a > [<c02ac344>] __wait_on_bit+0x36/0x5d > [<c0141d6e>] wait_on_page_bit+0x55/0x5b > [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4] > [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4] > [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4] > [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4] > [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4] > [<c015f731>] get_sb_bdev+0xe0/0x11e > [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4] > [<c015f336>] vfs_kern_mount+0x3b/0x76 > [<c0171621>] do_mount+0x68a/0x7a3 > [<c01717a2>] sys_mount+0x68/0xa4 > [<c0103dee>] sysenter_past_esp+0x5f/0x99 > ======================= ho hum. Maybe reiser4 needs updating for the git-block changes. I don't recall having seen a useful description of what's going on in git-block so some reverse-engineering might be needed. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io 2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton @ 2007-10-13 9:29 ` Laurent Riffard 2007-10-13 10:10 ` Jens Axboe 2007-10-14 13:09 ` Edward Shishkin 2007-10-15 16:13 ` 2.6.23-mm1 Zan Lynx 1 sibling, 2 replies; 15+ messages in thread From: Laurent Riffard @ 2007-10-13 9:29 UTC (permalink / raw) To: Andrew Morton, Neil Brown, Edward Shishkin Cc: linux-kernel, reiserfs-devel, Jens Axboe Reiser4: Drop 'size' argument from bio_endio and bi_end_io This patch pushes into Reiser4 the changes introduced by commit 6712ecf8f648118c3363c142196418f89a510b90: As bi_end_io is only called once when the request is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Please review. Signed-Off-By: Laurent Riffard <laurent.riffard@free.fr> --- fs/reiser4/flush_queue.c | 10 ++-------- fs/reiser4/page_cache.c | 24 ++++-------------------- fs/reiser4/status_flags.c | 7 +------ 3 files changed, 7 insertions(+), 34 deletions(-) Index: linux-2.6-mm/fs/reiser4/flush_queue.c =================================================================== --- linux-2.6-mm.orig/fs/reiser4/flush_queue.c +++ linux-2.6-mm/fs/reiser4/flush_queue.c @@ -391,9 +391,8 @@ int atom_fq_parts_are_clean(txn_atom * a } #endif /* Bio i/o completion routine for reiser4 write operations. */ -static int -end_io_handler(struct bio *bio, unsigned int bytes_done UNUSED_ARG, - int err) +static void +end_io_handler(struct bio *bio, int err) { int i; int nr_errors = 0; @@ -401,10 +400,6 @@ end_io_handler(struct bio *bio, unsigned assert("zam-958", bio->bi_rw & WRITE); - /* i/o op. is not fully completed */ - if (bio->bi_size != 0) - return 1; - if (err == -EOPNOTSUPP) set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); @@ -447,7 +442,6 @@ end_io_handler(struct bio *bio, unsigned } bio_put(bio); - return 0; } /* Count I/O requests which will be submitted by @bio in given flush queues Index: linux-2.6-mm/fs/reiser4/page_cache.c =================================================================== --- linux-2.6-mm.orig/fs/reiser4/page_cache.c +++ linux-2.6-mm/fs/reiser4/page_cache.c @@ -320,18 +320,11 @@ reiser4_tree *reiser4_tree_by_page(const mpage_end_io_read() would also do. But it's static. */ -static int -end_bio_single_page_read(struct bio *bio, unsigned int bytes_done UNUSED_ARG, - int err UNUSED_ARG) +static void +end_bio_single_page_read(struct bio *bio, int err UNUSED_ARG) { struct page *page; - if (bio->bi_size != 0) { - warning("nikita-3332", "Truncated single page read: %i", - bio->bi_size); - return 1; - } - page = bio->bi_io_vec[0].bv_page; if (test_bit(BIO_UPTODATE, &bio->bi_flags)) { @@ -342,7 +335,6 @@ end_bio_single_page_read(struct bio *bio } unlock_page(page); bio_put(bio); - return 0; } /* completion handler for single page bio-based write. @@ -350,25 +342,17 @@ end_bio_single_page_read(struct bio *bio mpage_end_io_write() would also do. But it's static. */ -static int -end_bio_single_page_write(struct bio *bio, unsigned int bytes_done UNUSED_ARG, - int err UNUSED_ARG) +static void +end_bio_single_page_write(struct bio *bio, int err UNUSED_ARG) { struct page *page; - if (bio->bi_size != 0) { - warning("nikita-3333", "Truncated single page write: %i", - bio->bi_size); - return 1; - } - page = bio->bi_io_vec[0].bv_page; if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) SetPageError(page); end_page_writeback(page); bio_put(bio); - return 0; } /* ->readpage() method for formatted nodes */ Index: linux-2.6-mm/fs/reiser4/status_flags.c =================================================================== --- linux-2.6-mm.orig/fs/reiser4/status_flags.c +++ linux-2.6-mm/fs/reiser4/status_flags.c @@ -15,12 +15,8 @@ /* This is our end I/O handler that marks page uptodate if IO was successful. It also unconditionally unlocks the page, so we can see that io was done. We do not free bio, because we hope to reuse that. */ -static int reiser4_status_endio(struct bio *bio, unsigned int bytes_done, - int err) +static void reiser4_status_endio(struct bio *bio, int err) { - if (bio->bi_size) - return 1; - if (test_bit(BIO_UPTODATE, &bio->bi_flags)) { SetPageUptodate(bio->bi_io_vec->bv_page); } else { @@ -28,7 +24,6 @@ static int reiser4_status_endio(struct b SetPageError(bio->bi_io_vec->bv_page); } unlock_page(bio->bi_io_vec->bv_page); - return 0; } /* Initialise status code. This is expected to be called from the disk format ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io 2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard @ 2007-10-13 10:10 ` Jens Axboe 2007-10-14 13:09 ` Edward Shishkin 1 sibling, 0 replies; 15+ messages in thread From: Jens Axboe @ 2007-10-13 10:10 UTC (permalink / raw) To: Laurent Riffard Cc: Andrew Morton, Neil Brown, Edward Shishkin, linux-kernel, reiserfs-devel On Sat, Oct 13 2007, Laurent Riffard wrote: > Reiser4: Drop 'size' argument from bio_endio and bi_end_io > > This patch pushes into Reiser4 the changes introduced by > commit 6712ecf8f648118c3363c142196418f89a510b90: > > As bi_end_io is only called once when the request is complete, > the 'size' argument is now redundant. Remove it. > > Now there is no need for bio_endio to subtract the size completed > from bi_size. So don't do that either. > > While we are at it, change bi_end_io to return void. Looks correct to me. Acked-by: Jens Axboe <jens.axboe@oracle.com> -- Jens Axboe ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io 2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard 2007-10-13 10:10 ` Jens Axboe @ 2007-10-14 13:09 ` Edward Shishkin 1 sibling, 0 replies; 15+ messages in thread From: Edward Shishkin @ 2007-10-14 13:09 UTC (permalink / raw) To: Laurent Riffard Cc: Andrew Morton, Neil Brown, linux-kernel, reiserfs-devel, Jens Axboe, Paul Jackson Laurent Riffard wrote: >Reiser4: Drop 'size' argument from bio_endio and bi_end_io > >This patch pushes into Reiser4 the changes introduced by >commit 6712ecf8f648118c3363c142196418f89a510b90: > > As bi_end_io is only called once when the request is complete, > the 'size' argument is now redundant. Remove it. > > Now there is no need for bio_endio to subtract the size completed > from bi_size. So don't do that either. > > While we are at it, change bi_end_io to return void. > >Please review. > > Thanks! Signed-Off-By: Edward Shishkin <edward@namesys.com> >Signed-Off-By: Laurent Riffard <laurent.riffard@free.fr> >--- > fs/reiser4/flush_queue.c | 10 ++-------- > fs/reiser4/page_cache.c | 24 ++++-------------------- > fs/reiser4/status_flags.c | 7 +------ > 3 files changed, 7 insertions(+), 34 deletions(-) > >Index: linux-2.6-mm/fs/reiser4/flush_queue.c >=================================================================== >--- linux-2.6-mm.orig/fs/reiser4/flush_queue.c >+++ linux-2.6-mm/fs/reiser4/flush_queue.c >@@ -391,9 +391,8 @@ int atom_fq_parts_are_clean(txn_atom * a > } > #endif > /* Bio i/o completion routine for reiser4 write operations. */ >-static int >-end_io_handler(struct bio *bio, unsigned int bytes_done UNUSED_ARG, >- int err) >+static void >+end_io_handler(struct bio *bio, int err) > { > int i; > int nr_errors = 0; >@@ -401,10 +400,6 @@ end_io_handler(struct bio *bio, unsigned > > assert("zam-958", bio->bi_rw & WRITE); > >- /* i/o op. is not fully completed */ >- if (bio->bi_size != 0) >- return 1; >- > if (err == -EOPNOTSUPP) > set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); > >@@ -447,7 +442,6 @@ end_io_handler(struct bio *bio, unsigned > } > > bio_put(bio); >- return 0; > } > > /* Count I/O requests which will be submitted by @bio in given flush queues >Index: linux-2.6-mm/fs/reiser4/page_cache.c >=================================================================== >--- linux-2.6-mm.orig/fs/reiser4/page_cache.c >+++ linux-2.6-mm/fs/reiser4/page_cache.c >@@ -320,18 +320,11 @@ reiser4_tree *reiser4_tree_by_page(const > mpage_end_io_read() would also do. But it's static. > > */ >-static int >-end_bio_single_page_read(struct bio *bio, unsigned int bytes_done UNUSED_ARG, >- int err UNUSED_ARG) >+static void >+end_bio_single_page_read(struct bio *bio, int err UNUSED_ARG) > { > struct page *page; > >- if (bio->bi_size != 0) { >- warning("nikita-3332", "Truncated single page read: %i", >- bio->bi_size); >- return 1; >- } >- > page = bio->bi_io_vec[0].bv_page; > > if (test_bit(BIO_UPTODATE, &bio->bi_flags)) { >@@ -342,7 +335,6 @@ end_bio_single_page_read(struct bio *bio > } > unlock_page(page); > bio_put(bio); >- return 0; > } > > /* completion handler for single page bio-based write. >@@ -350,25 +342,17 @@ end_bio_single_page_read(struct bio *bio > mpage_end_io_write() would also do. But it's static. > > */ >-static int >-end_bio_single_page_write(struct bio *bio, unsigned int bytes_done UNUSED_ARG, >- int err UNUSED_ARG) >+static void >+end_bio_single_page_write(struct bio *bio, int err UNUSED_ARG) > { > struct page *page; > >- if (bio->bi_size != 0) { >- warning("nikita-3333", "Truncated single page write: %i", >- bio->bi_size); >- return 1; >- } >- > page = bio->bi_io_vec[0].bv_page; > > if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) > SetPageError(page); > end_page_writeback(page); > bio_put(bio); >- return 0; > } > > /* ->readpage() method for formatted nodes */ >Index: linux-2.6-mm/fs/reiser4/status_flags.c >=================================================================== >--- linux-2.6-mm.orig/fs/reiser4/status_flags.c >+++ linux-2.6-mm/fs/reiser4/status_flags.c >@@ -15,12 +15,8 @@ > /* This is our end I/O handler that marks page uptodate if IO was successful. It also > unconditionally unlocks the page, so we can see that io was done. > We do not free bio, because we hope to reuse that. */ >-static int reiser4_status_endio(struct bio *bio, unsigned int bytes_done, >- int err) >+static void reiser4_status_endio(struct bio *bio, int err) > { >- if (bio->bi_size) >- return 1; >- > if (test_bit(BIO_UPTODATE, &bio->bi_flags)) { > SetPageUptodate(bio->bi_io_vec->bv_page); > } else { >@@ -28,7 +24,6 @@ static int reiser4_status_endio(struct b > SetPageError(bio->bi_io_vec->bv_page); > } > unlock_page(bio->bi_io_vec->bv_page); >- return 0; > } > > /* Initialise status code. This is expected to be called from the disk format > > >- >To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1 2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton 2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard @ 2007-10-15 16:13 ` Zan Lynx 1 sibling, 0 replies; 15+ messages in thread From: Zan Lynx @ 2007-10-15 16:13 UTC (permalink / raw) To: Andrew Morton; +Cc: Laurent Riffard, linux-kernel, reiserfs-devel, Jens Axboe [-- Attachment #1: Type: text/plain, Size: 2368 bytes --] On Fri, 2007-10-12 at 14:00 -0700, Andrew Morton wrote: > On Fri, 12 Oct 2007 22:38:25 +0200 > Laurent Riffard <laurent.riffard@free.fr> wrote: > > > Le 12.10.2007 06:31, Andrew Morton a écrit : > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > Mounting reiser4 fs does hang with these messages in dmesg: > > > > Loading Reiser4. See www.namesys.com for a description of Reiser4. > > reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]: > > WARNING: Truncated single page read: 4096 > > > > Hitting SysRq-W produces this output: > > > > SysRq : Show Blocked State > > task PC stack pid father > > mount D c20d6b70 1592 2509 2495 > > c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 > > c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 > > c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 > > Call Trace: > > [<c02ac14e>] io_schedule+0xe/0x16 > > [<c0141b7b>] sync_page+0x36/0x3a > > [<c02ac344>] __wait_on_bit+0x36/0x5d > > [<c0141d6e>] wait_on_page_bit+0x55/0x5b > > [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4] > > [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4] > > [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4] > > [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4] > > [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4] > > [<c015f731>] get_sb_bdev+0xe0/0x11e > > [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4] > > [<c015f336>] vfs_kern_mount+0x3b/0x76 > > [<c0171621>] do_mount+0x68a/0x7a3 > > [<c01717a2>] sys_mount+0x68/0xa4 > > [<c0103dee>] sysenter_past_esp+0x5f/0x99 > > ======================= > > ho hum. Maybe reiser4 needs updating for the git-block changes. > > I don't recall having seen a useful description of what's going on > in git-block so some reverse-engineering might be needed. Hmm. I can add more data to this. My x86_64 mode laptop is running 2.6.23-mm1 with Reiser4 and does not experience problems. I am using 64-bit kernel, libata (I think, whatever the SCSI-like PATA is called), and Reiser4. Both libata and Reiser4 are built-in, not modules. -- Zan Lynx <zlynx@acm.org> [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs [not found] <20071011213126.cf92efb7.akpm@linux-foundation.org> 2007-10-12 20:38 ` 2.6.23-mm1 Laurent Riffard @ 2007-10-14 22:34 ` Laurent Riffard 2007-10-15 8:40 ` Christoph Hellwig 1 sibling, 1 reply; 15+ messages in thread From: Laurent Riffard @ 2007-10-14 22:34 UTC (permalink / raw) To: Andrew Morton, Dave Hansen; +Cc: linux-kernel, linux-fsdevel, reiserfs-devel Le 12.10.2007 06:31, Andrew Morton a écrit : > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ /home is mounted with the following options: /dev/mapper/vglinux1-lvhome on /home type reiserfs (rw,noatime,nodiratime,user_xattr) I guess that beagled (the Beagle desktop search daemon) has populated user xattrs on almost all files. Now, when I delete a file, two BUGs occur and the system hangs. Here is the stack for the first BUG (the second one is very similar): [partially hand copied stack] _fput fput reiserfs_delete_xattrs reiserfs_delete_inode generic_delete_inode generic_drop_inode iput do_unlinkat sys_unlink sys_enter_past_esp I reported a similar BUG in 2.6.22-rc8-mm2 (see http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I tested it and it was OK for 2.6.22-rc8-mm2. I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. ---- From: Dave Hansen <haveblue@us.ibm.com> The bug is caused by reiserfs creating a special 'struct file' with a NULL vfsmount. /* Opens a file pointer to the attribute associated with inode */ static struct file *open_xa_file(const struct inode *inode, const char *name, int flags) { ... fp = dentry_open(xafile, NULL, O_RDWR); /* dentry_open dputs the dentry if it fails */ As Christoph just said, this is somewhat of a bandaid. But, it shouldn't hurt anything. --- lxc-dave/fs/file_table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff -puN fs/open.c~fix-reiserfs-oops fs/open.c diff -puN fs/file_table.c~fix-reiserfs-oops fs/file_table.c --- lxc/fs/file_table.c~fix-reiserfs-oops 2007-09-27 13:32:20.000000000 -0700 +++ lxc-dave/fs/file_table.c 2007-09-27 13:33:11.000000000 -0700 @@ -236,7 +236,7 @@ void fastcall __fput(struct file *file) fops_put(file->f_op); if (file->f_mode & FMODE_WRITE) { put_write_access(inode); - if (!special_file(inode->i_mode)) + if (!special_file(inode->i_mode) && mnt) mnt_drop_write(mnt); } put_pid(file->f_owner.pid); diff -puN include/linux/mount.h~fix-reiserfs-oops include/linux/mount.h _ - To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-14 22:34 ` 2.6.23-mm1: BUG in reiserfs_delete_xattrs Laurent Riffard @ 2007-10-15 8:40 ` Christoph Hellwig 2007-10-15 18:31 ` Jeff Mahoney ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Christoph Hellwig @ 2007-10-15 8:40 UTC (permalink / raw) To: Laurent Riffard Cc: Andrew Morton, Dave Hansen, linux-kernel, linux-fsdevel, reiserfs-devel On Mon, Oct 15, 2007 at 12:34:58AM +0200, Laurent Riffard wrote: > reiserfs_delete_xattrs > reiserfs_delete_inode > generic_delete_inode > generic_drop_inode > iput > do_unlinkat > sys_unlink > sys_enter_past_esp > > I reported a similar BUG in 2.6.22-rc8-mm2 (see > http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I > tested it and it was OK for 2.6.22-rc8-mm2. > > I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. The delete path is a similar case as the one Dave fixed, also cause by a NULL vfsmount passed to dentry_open, but through a different code-path. Untested fix for this problem below: Index: linux-2.6.23-rc8/fs/reiserfs/xattr.c =================================================================== --- linux-2.6.23-rc8.orig/fs/reiserfs/xattr.c 2007-09-30 14:13:46.000000000 +0200 +++ linux-2.6.23-rc8/fs/reiserfs/xattr.c 2007-09-30 14:18:30.000000000 +0200 @@ -207,9 +207,8 @@ static struct dentry *get_xa_file_dentry * we're called with i_mutex held, so there are no worries about the directory * changing underneath us. */ -static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir) +static int __xattr_readdir(struct inode *inode, void *dirent, filldir_t filldir) { - struct inode *inode = filp->f_path.dentry->d_inode; struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */ INITIALIZE_PATH(path_to_entry); struct buffer_head *bh; @@ -352,24 +351,19 @@ static int __xattr_readdir(struct file * * this is stolen from vfs_readdir * */ -static -int xattr_readdir(struct file *file, filldir_t filler, void *buf) +static int xattr_readdir(struct inode *inode, filldir_t filler, void *buf) { - struct inode *inode = file->f_path.dentry->d_inode; int res = -ENOTDIR; - if (!file->f_op || !file->f_op->readdir) - goto out; + mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR); -// down(&inode->i_zombie); res = -ENOENT; if (!IS_DEADDIR(inode)) { lock_kernel(); - res = __xattr_readdir(file, buf, filler); + res = __xattr_readdir(inode, buf, filler); unlock_kernel(); } -// up(&inode->i_zombie); mutex_unlock(&inode->i_mutex); - out: + return res; } @@ -721,7 +715,6 @@ reiserfs_delete_xattrs_filler(void *buf, /* This is called w/ inode->i_mutex downed */ int reiserfs_delete_xattrs(struct inode *inode) { - struct file *fp; struct dentry *dir, *root; int err = 0; @@ -742,15 +735,8 @@ int reiserfs_delete_xattrs(struct inode return 0; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - lock_kernel(); - err = xattr_readdir(fp, reiserfs_delete_xattrs_filler, dir); + err = xattr_readdir(dir->d_inode, reiserfs_delete_xattrs_filler, dir); if (err) { unlock_kernel(); goto out_dir; @@ -770,7 +756,7 @@ int reiserfs_delete_xattrs(struct inode unlock_kernel(); out_dir: - fput(fp); + dput(dir); out: if (!err) @@ -812,7 +798,6 @@ reiserfs_chown_xattrs_filler(void *buf, int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs) { - struct file *fp; struct dentry *dir; int err = 0; struct reiserfs_chown_buf buf; @@ -836,13 +821,6 @@ int reiserfs_chown_xattrs(struct inode * goto out; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - lock_kernel(); attrs->ia_valid &= (ATTR_UID | ATTR_GID | ATTR_CTIME); @@ -850,7 +828,7 @@ int reiserfs_chown_xattrs(struct inode * buf.attrs = attrs; buf.inode = inode; - err = xattr_readdir(fp, reiserfs_chown_xattrs_filler, &buf); + err = xattr_readdir(dir->d_inode, reiserfs_chown_xattrs_filler, &buf); if (err) { unlock_kernel(); goto out_dir; @@ -860,7 +838,7 @@ int reiserfs_chown_xattrs(struct inode * unlock_kernel(); out_dir: - fput(fp); + dput(dir); out: attrs->ia_valid = ia_valid; @@ -1008,7 +986,6 @@ reiserfs_listxattr_filler(void *buf, con */ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size) { - struct file *fp; struct dentry *dir; int err = 0; struct reiserfs_listxattr_buf buf; @@ -1031,13 +1008,6 @@ ssize_t reiserfs_listxattr(struct dentry goto out; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - buf.r_buf = buffer; buf.r_size = buffer ? size : 0; buf.r_pos = 0; @@ -1045,7 +1015,7 @@ ssize_t reiserfs_listxattr(struct dentry REISERFS_I(dentry->d_inode)->i_flags |= i_has_xattr_dir; - err = xattr_readdir(fp, reiserfs_listxattr_filler, &buf); + err = xattr_readdir(dir->d_inode, reiserfs_listxattr_filler, &buf); if (err) goto out_dir; @@ -1055,7 +1025,7 @@ ssize_t reiserfs_listxattr(struct dentry err = buf.r_pos; out_dir: - fput(fp); + dput(dir); out: reiserfs_read_unlock_xattr_i(dentry->d_inode); ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-15 8:40 ` Christoph Hellwig @ 2007-10-15 18:31 ` Jeff Mahoney 2007-10-15 19:51 ` Laurent Riffard [not found] ` <4713B1E7.2010504@suse.com> 2 siblings, 0 replies; 15+ messages in thread From: Jeff Mahoney @ 2007-10-15 18:31 UTC (permalink / raw) To: Christoph Hellwig, Laurent Riffard, Andrew Morton, Dave Hansen, linux-kernel Christoph Hellwig wrote: > On Mon, Oct 15, 2007 at 12:34:58AM +0200, Laurent Riffard wrote: >> reiserfs_delete_xattrs >> reiserfs_delete_inode >> generic_delete_inode >> generic_drop_inode >> iput >> do_unlinkat >> sys_unlink >> sys_enter_past_esp >> >> I reported a similar BUG in 2.6.22-rc8-mm2 (see >> http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I >> tested it and it was OK for 2.6.22-rc8-mm2. >> >> I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. > > The delete path is a similar case as the one Dave fixed, also cause by > a NULL vfsmount passed to dentry_open, but through a different code-path. > > Untested fix for this problem below: Here's a patch I worked up the other night that kills off struct file completely from the xattr code. I've tested it locally. After several posts and bug reports regarding interaction with the NULL nameidata, here's a patch to clean up the mess with struct file in the reiserfs xattr code. As observed in several of the posts, there's really no need for struct file to exist in the xattr code. It was really only passed around due to the f_op->readdir() and a_ops->{prepare,commit}_write prototypes requiring it. reiserfs_prepare_write() and reiserfs_commit_write() don't actually use the struct file passed to it, and the xattr code uses a private version of reiserfs_readdir() to enumerate the xattr directories. I do have patches in my queue to convert the xattrs to use reiserfs_readdir(), but I guess I'll just have to rework those. This is pretty close to the patch by Dave Hansen for -mm, but I didn't notice it until after I wrote this up. Signed-off-by: Jeff Mahoney <jeffm@suse.com> --- fs/reiserfs/xattr.c | 111 ++++++++++++++-------------------------------------- 1 file changed, 31 insertions(+), 80 deletions(-) --- a/fs/reiserfs/xattr.c 2007-08-27 14:03:39.000000000 -0400 +++ b/fs/reiserfs/xattr.c 2007-10-14 22:11:05.000000000 -0400 @@ -191,28 +191,11 @@ static struct dentry *get_xa_file_dentry dput(xadir); if (err) xafile = ERR_PTR(err); - return xafile; -} - -/* Opens a file pointer to the attribute associated with inode */ -static struct file *open_xa_file(const struct inode *inode, const char *name, - int flags) -{ - struct dentry *xafile; - struct file *fp; - - xafile = get_xa_file_dentry(inode, name, flags); - if (IS_ERR(xafile)) - return ERR_PTR(PTR_ERR(xafile)); else if (!xafile->d_inode) { dput(xafile); - return ERR_PTR(-ENODATA); + xafile = ERR_PTR(-ENODATA); } - - fp = dentry_open(xafile, NULL, O_RDWR); - /* dentry_open dputs the dentry if it fails */ - - return fp; + return xafile; } /* @@ -228,9 +211,8 @@ static struct file *open_xa_file(const s * we're called with i_mutex held, so there are no worries about the directory * changing underneath us. */ -static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir) +static int __xattr_readdir(struct inode *inode, void *dirent, filldir_t filldir) { - struct inode *inode = filp->f_path.dentry->d_inode; struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */ INITIALIZE_PATH(path_to_entry); struct buffer_head *bh; @@ -374,23 +356,16 @@ static int __xattr_readdir(struct file * * */ static -int xattr_readdir(struct file *file, filldir_t filler, void *buf) +int xattr_readdir(struct inode *inode, filldir_t filler, void *buf) { - struct inode *inode = file->f_path.dentry->d_inode; - int res = -ENOTDIR; - if (!file->f_op || !file->f_op->readdir) - goto out; + int res = -ENOENT; mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR); -// down(&inode->i_zombie); - res = -ENOENT; if (!IS_DEADDIR(inode)) { lock_kernel(); - res = __xattr_readdir(file, buf, filler); + res = __xattr_readdir(inode, buf, filler); unlock_kernel(); } -// up(&inode->i_zombie); mutex_unlock(&inode->i_mutex); - out: return res; } @@ -436,7 +411,7 @@ reiserfs_xattr_set(struct inode *inode, size_t buffer_size, int flags) { int err = 0; - struct file *fp; + struct dentry *dentry; struct page *page; char *data; struct address_space *mapping; @@ -454,18 +429,18 @@ reiserfs_xattr_set(struct inode *inode, xahash = xattr_hash(buffer, buffer_size); open_file: - fp = open_xa_file(inode, name, flags); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); + dentry = get_xa_file_dentry(inode, name, flags); + if (IS_ERR(dentry)) { + err = PTR_ERR(dentry); goto out; } - xinode = fp->f_path.dentry->d_inode; + xinode = dentry->d_inode; REISERFS_I(inode)->i_flags |= i_has_xattr_dir; /* we need to copy it off.. */ if (xinode->i_nlink > 1) { - fput(fp); + dput(dentry); err = reiserfs_xattr_del(inode, name); if (err < 0) goto out; @@ -479,7 +454,7 @@ reiserfs_xattr_set(struct inode *inode, newattrs.ia_size = buffer_size; newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME; mutex_lock(&xinode->i_mutex); - err = notify_change(fp->f_path.dentry, &newattrs); + err = notify_change(dentry, &newattrs); if (err) goto out_filp; @@ -512,15 +487,15 @@ reiserfs_xattr_set(struct inode *inode, rxh->h_hash = cpu_to_le32(xahash); } - err = mapping->a_ops->prepare_write(fp, page, page_offset, + err = mapping->a_ops->prepare_write(NULL, page, page_offset, page_offset + chunk + skip); if (!err) { if (buffer) memcpy(data + skip, buffer + buffer_pos, chunk); - err = - mapping->a_ops->commit_write(fp, page, page_offset, - page_offset + chunk + - skip); + err = mapping->a_ops->commit_write(NULL, page, + page_offset, + page_offset + chunk + + skip); } unlock_page(page); reiserfs_put_page(page); @@ -542,7 +517,7 @@ reiserfs_xattr_set(struct inode *inode, out_filp: mutex_unlock(&xinode->i_mutex); - fput(fp); + dput(dentry); out: return err; @@ -556,7 +531,7 @@ reiserfs_xattr_get(const struct inode *i size_t buffer_size) { ssize_t err = 0; - struct file *fp; + struct dentry *dentry; size_t isize; size_t file_pos = 0; size_t buffer_pos = 0; @@ -572,13 +547,13 @@ reiserfs_xattr_get(const struct inode *i if (get_inode_sd_version(inode) == STAT_DATA_V1) return -EOPNOTSUPP; - fp = open_xa_file(inode, name, FL_READONLY); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); + dentry = get_xa_file_dentry(inode, name, FL_READONLY); + if (IS_ERR(dentry)) { + err = PTR_ERR(dentry); goto out; } - xinode = fp->f_path.dentry->d_inode; + xinode = dentry->d_inode; isize = xinode->i_size; REISERFS_I(inode)->i_flags |= i_has_xattr_dir; @@ -646,7 +621,7 @@ reiserfs_xattr_get(const struct inode *i } out_dput: - fput(fp); + dput(dentry); out: return err; @@ -736,7 +711,6 @@ reiserfs_delete_xattrs_filler(void *buf, /* This is called w/ inode->i_mutex downed */ int reiserfs_delete_xattrs(struct inode *inode) { - struct file *fp; struct dentry *dir, *root; int err = 0; @@ -757,15 +731,8 @@ int reiserfs_delete_xattrs(struct inode return 0; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - lock_kernel(); - err = xattr_readdir(fp, reiserfs_delete_xattrs_filler, dir); + err = xattr_readdir(dir->d_inode, reiserfs_delete_xattrs_filler, dir); if (err) { unlock_kernel(); goto out_dir; @@ -785,7 +752,7 @@ int reiserfs_delete_xattrs(struct inode unlock_kernel(); out_dir: - fput(fp); + dput(dir); out: if (!err) @@ -827,7 +794,6 @@ reiserfs_chown_xattrs_filler(void *buf, int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs) { - struct file *fp; struct dentry *dir; int err = 0; struct reiserfs_chown_buf buf; @@ -851,13 +817,6 @@ int reiserfs_chown_xattrs(struct inode * goto out; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - lock_kernel(); attrs->ia_valid &= (ATTR_UID | ATTR_GID | ATTR_CTIME); @@ -865,7 +824,7 @@ int reiserfs_chown_xattrs(struct inode * buf.attrs = attrs; buf.inode = inode; - err = xattr_readdir(fp, reiserfs_chown_xattrs_filler, &buf); + err = xattr_readdir(dir->d_inode, reiserfs_chown_xattrs_filler, &buf); if (err) { unlock_kernel(); goto out_dir; @@ -875,7 +834,7 @@ int reiserfs_chown_xattrs(struct inode * unlock_kernel(); out_dir: - fput(fp); + dput(dir); out: attrs->ia_valid = ia_valid; @@ -1023,7 +982,6 @@ reiserfs_listxattr_filler(void *buf, con */ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size) { - struct file *fp; struct dentry *dir; int err = 0; struct reiserfs_listxattr_buf buf; @@ -1046,13 +1004,6 @@ ssize_t reiserfs_listxattr(struct dentry goto out; } - fp = dentry_open(dir, NULL, O_RDWR); - if (IS_ERR(fp)) { - err = PTR_ERR(fp); - /* dentry_open dputs the dentry if it fails */ - goto out; - } - buf.r_buf = buffer; buf.r_size = buffer ? size : 0; buf.r_pos = 0; @@ -1060,7 +1011,7 @@ ssize_t reiserfs_listxattr(struct dentry REISERFS_I(dentry->d_inode)->i_flags |= i_has_xattr_dir; - err = xattr_readdir(fp, reiserfs_listxattr_filler, &buf); + err = xattr_readdir(dir->d_inode, reiserfs_listxattr_filler, &buf); if (err) goto out_dir; @@ -1070,7 +1021,7 @@ ssize_t reiserfs_listxattr(struct dentry err = buf.r_pos; out_dir: - fput(fp); + dput(dir); out: reiserfs_read_unlock_xattr_i(dentry->d_inode); -- Jeff Mahoney SUSE Labs ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-15 8:40 ` Christoph Hellwig 2007-10-15 18:31 ` Jeff Mahoney @ 2007-10-15 19:51 ` Laurent Riffard [not found] ` <4713B1E7.2010504@suse.com> 2 siblings, 0 replies; 15+ messages in thread From: Laurent Riffard @ 2007-10-15 19:51 UTC (permalink / raw) To: Christoph Hellwig, Laurent Riffard, Andrew Morton, Dave Hansen, linux-kernel Le 15.10.2007 10:40, Christoph Hellwig a écrit : > On Mon, Oct 15, 2007 at 12:34:58AM +0200, Laurent Riffard wrote: >> reiserfs_delete_xattrs >> reiserfs_delete_inode >> generic_delete_inode >> generic_drop_inode >> iput >> do_unlinkat >> sys_unlink >> sys_enter_past_esp >> >> I reported a similar BUG in 2.6.22-rc8-mm2 (see >> http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I >> tested it and it was OK for 2.6.22-rc8-mm2. >> >> I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. > > The delete path is a similar case as the one Dave fixed, also cause by > a NULL vfsmount passed to dentry_open, but through a different code-path. > > Untested fix for this problem below: Does work fine, thanks. Tested-by: Laurent Riffard <laurent.riffard@free.fr> > Index: linux-2.6.23-rc8/fs/reiserfs/xattr.c > =================================================================== > --- linux-2.6.23-rc8.orig/fs/reiserfs/xattr.c 2007-09-30 14:13:46.000000000 +0200 > +++ linux-2.6.23-rc8/fs/reiserfs/xattr.c 2007-09-30 14:18:30.000000000 +0200 > @@ -207,9 +207,8 @@ static struct dentry *get_xa_file_dentry > * we're called with i_mutex held, so there are no worries about the directory > * changing underneath us. > */ > -static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir) > +static int __xattr_readdir(struct inode *inode, void *dirent, filldir_t filldir) > { > - struct inode *inode = filp->f_path.dentry->d_inode; > struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */ > INITIALIZE_PATH(path_to_entry); > struct buffer_head *bh; > @@ -352,24 +351,19 @@ static int __xattr_readdir(struct file * > * this is stolen from vfs_readdir > * > */ > -static > -int xattr_readdir(struct file *file, filldir_t filler, void *buf) > +static int xattr_readdir(struct inode *inode, filldir_t filler, void *buf) > { > - struct inode *inode = file->f_path.dentry->d_inode; > int res = -ENOTDIR; > - if (!file->f_op || !file->f_op->readdir) > - goto out; > + > mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR); > -// down(&inode->i_zombie); > res = -ENOENT; > if (!IS_DEADDIR(inode)) { > lock_kernel(); > - res = __xattr_readdir(file, buf, filler); > + res = __xattr_readdir(inode, buf, filler); > unlock_kernel(); > } > -// up(&inode->i_zombie); > mutex_unlock(&inode->i_mutex); > - out: > + > return res; > } > > @@ -721,7 +715,6 @@ reiserfs_delete_xattrs_filler(void *buf, > /* This is called w/ inode->i_mutex downed */ > int reiserfs_delete_xattrs(struct inode *inode) > { > - struct file *fp; > struct dentry *dir, *root; > int err = 0; > > @@ -742,15 +735,8 @@ int reiserfs_delete_xattrs(struct inode > return 0; > } > > - fp = dentry_open(dir, NULL, O_RDWR); > - if (IS_ERR(fp)) { > - err = PTR_ERR(fp); > - /* dentry_open dputs the dentry if it fails */ > - goto out; > - } > - > lock_kernel(); > - err = xattr_readdir(fp, reiserfs_delete_xattrs_filler, dir); > + err = xattr_readdir(dir->d_inode, reiserfs_delete_xattrs_filler, dir); > if (err) { > unlock_kernel(); > goto out_dir; > @@ -770,7 +756,7 @@ int reiserfs_delete_xattrs(struct inode > unlock_kernel(); > > out_dir: > - fput(fp); > + dput(dir); > > out: > if (!err) > @@ -812,7 +798,6 @@ reiserfs_chown_xattrs_filler(void *buf, > > int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs) > { > - struct file *fp; > struct dentry *dir; > int err = 0; > struct reiserfs_chown_buf buf; > @@ -836,13 +821,6 @@ int reiserfs_chown_xattrs(struct inode * > goto out; > } > > - fp = dentry_open(dir, NULL, O_RDWR); > - if (IS_ERR(fp)) { > - err = PTR_ERR(fp); > - /* dentry_open dputs the dentry if it fails */ > - goto out; > - } > - > lock_kernel(); > > attrs->ia_valid &= (ATTR_UID | ATTR_GID | ATTR_CTIME); > @@ -850,7 +828,7 @@ int reiserfs_chown_xattrs(struct inode * > buf.attrs = attrs; > buf.inode = inode; > > - err = xattr_readdir(fp, reiserfs_chown_xattrs_filler, &buf); > + err = xattr_readdir(dir->d_inode, reiserfs_chown_xattrs_filler, &buf); > if (err) { > unlock_kernel(); > goto out_dir; > @@ -860,7 +838,7 @@ int reiserfs_chown_xattrs(struct inode * > unlock_kernel(); > > out_dir: > - fput(fp); > + dput(dir); > > out: > attrs->ia_valid = ia_valid; > @@ -1008,7 +986,6 @@ reiserfs_listxattr_filler(void *buf, con > */ > ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size) > { > - struct file *fp; > struct dentry *dir; > int err = 0; > struct reiserfs_listxattr_buf buf; > @@ -1031,13 +1008,6 @@ ssize_t reiserfs_listxattr(struct dentry > goto out; > } > > - fp = dentry_open(dir, NULL, O_RDWR); > - if (IS_ERR(fp)) { > - err = PTR_ERR(fp); > - /* dentry_open dputs the dentry if it fails */ > - goto out; > - } > - > buf.r_buf = buffer; > buf.r_size = buffer ? size : 0; > buf.r_pos = 0; > @@ -1045,7 +1015,7 @@ ssize_t reiserfs_listxattr(struct dentry > > REISERFS_I(dentry->d_inode)->i_flags |= i_has_xattr_dir; > > - err = xattr_readdir(fp, reiserfs_listxattr_filler, &buf); > + err = xattr_readdir(dir->d_inode, reiserfs_listxattr_filler, &buf); > if (err) > goto out_dir; > > @@ -1055,7 +1025,7 @@ ssize_t reiserfs_listxattr(struct dentry > err = buf.r_pos; > > out_dir: > - fput(fp); > + dput(dir); > > out: > reiserfs_read_unlock_xattr_i(dentry->d_inode); > - To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
[parent not found: <4713B1E7.2010504@suse.com>]
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs [not found] ` <4713B1E7.2010504@suse.com> @ 2007-10-15 20:06 ` Laurent Riffard 2007-10-15 20:23 ` Jeff Mahoney 2007-10-17 8:59 ` Christoph Hellwig 2007-10-17 8:58 ` Christoph Hellwig 1 sibling, 2 replies; 15+ messages in thread From: Laurent Riffard @ 2007-10-15 20:06 UTC (permalink / raw) To: Jeff Mahoney Cc: Christoph Hellwig, Andrew Morton, Dave Hansen, linux-kernel, linux-fsdevel, reiserfs-devel Le 15.10.2007 20:31, Jeff Mahoney a écrit : > Christoph Hellwig wrote: >> On Mon, Oct 15, 2007 at 12:34:58AM +0200, Laurent Riffard wrote: >>> reiserfs_delete_xattrs >>> reiserfs_delete_inode >>> generic_delete_inode >>> generic_drop_inode >>> iput >>> do_unlinkat >>> sys_unlink >>> sys_enter_past_esp >>> >>> I reported a similar BUG in 2.6.22-rc8-mm2 (see >>> http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I >>> tested it and it was OK for 2.6.22-rc8-mm2. >>> >>> I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. >> The delete path is a similar case as the one Dave fixed, also cause by >> a NULL vfsmount passed to dentry_open, but through a different code-path. >> >> Untested fix for this problem below: > > Here's a patch I worked up the other night that kills off struct file > completely from the xattr code. I've tested it locally. Sorry Jeff, your patch does not apply on 2.6.23-mm1. The 'struct file' removal from reiserfs_xattr_ function is already in -mm (make-reiserfs-stop-using-struct-file-for-internal.patch). The Dave's patch I was refering to is this one: ==== BEGIN ===== The bug is caused by reiserfs creating a special 'struct file' with a NULL vfsmount. /* Opens a file pointer to the attribute associated with inode */ static struct file *open_xa_file(const struct inode *inode, const char *name, int flags) { ... fp = dentry_open(xafile, NULL, O_RDWR); /* dentry_open dputs the dentry if it fails */ As Christoph just said, this is somewhat of a bandaid. But, it shouldn't hurt anything. --- lxc-dave/fs/file_table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff -puN fs/open.c~fix-reiserfs-oops fs/open.c diff -puN fs/file_table.c~fix-reiserfs-oops fs/file_table.c --- lxc/fs/file_table.c~fix-reiserfs-oops 2007-09-27 13:32:20.000000000 -0700 +++ lxc-dave/fs/file_table.c 2007-09-27 13:33:11.000000000 -0700 @@ -236,7 +236,7 @@ void fastcall __fput(struct file *file) fops_put(file->f_op); if (file->f_mode & FMODE_WRITE) { put_write_access(inode); - if (!special_file(inode->i_mode)) + if (!special_file(inode->i_mode) && mnt) mnt_drop_write(mnt); } put_pid(file->f_owner.pid); diff -puN include/linux/mount.h~fix-reiserfs-oops include/linux/mount.h ==== END ==== Dave sent it privately to me... I guess this "bandaid" is no longer needed now, is it? ~~ laurent - To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-15 20:06 ` Laurent Riffard @ 2007-10-15 20:23 ` Jeff Mahoney 2007-10-17 8:59 ` Christoph Hellwig 1 sibling, 0 replies; 15+ messages in thread From: Jeff Mahoney @ 2007-10-15 20:23 UTC (permalink / raw) To: Laurent Riffard Cc: Christoph Hellwig, Andrew Morton, Dave Hansen, linux-kernel, linux-fsdevel, reiserfs-devel -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Laurent Riffard wrote: > Le 15.10.2007 20:31, Jeff Mahoney a écrit : >> Christoph Hellwig wrote: >>> On Mon, Oct 15, 2007 at 12:34:58AM +0200, Laurent Riffard wrote: >>>> reiserfs_delete_xattrs >>>> reiserfs_delete_inode >>>> generic_delete_inode >>>> generic_drop_inode >>>> iput >>>> do_unlinkat >>>> sys_unlink >>>> sys_enter_past_esp >>>> >>>> I reported a similar BUG in 2.6.22-rc8-mm2 (see >>>> http://lkml.org/lkml/2007/9/27/235). Dave Hansen sent a patch for it, I >>>> tested it and it was OK for 2.6.22-rc8-mm2. >>>> >>>> I tried this patch on 2.6.23-mm1, and it fixed the BUGs here too. >>> The delete path is a similar case as the one Dave fixed, also cause by >>> a NULL vfsmount passed to dentry_open, but through a different code-path. >>> >>> Untested fix for this problem below: >> Here's a patch I worked up the other night that kills off struct file >> completely from the xattr code. I've tested it locally. > > Sorry Jeff, your patch does not apply on 2.6.23-mm1. The 'struct file' > removal from reiserfs_xattr_ function is already in -mm > (make-reiserfs-stop-using-struct-file-for-internal.patch). > > The Dave's patch I was refering to is this one: I'd guess not. This patch was actually against mainline. I should've specified. I can work up one against -mm later today if it's needed. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHE8wyLPWxlyuTD7IRAiJrAJ4nC6gwH1cFjWx6BI04O5fDIRftmACcD2wb whyXThHlIBK2phnZ6Pf8Pb8= =Kx6k -----END PGP SIGNATURE----- - To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-15 20:06 ` Laurent Riffard 2007-10-15 20:23 ` Jeff Mahoney @ 2007-10-17 8:59 ` Christoph Hellwig 1 sibling, 0 replies; 15+ messages in thread From: Christoph Hellwig @ 2007-10-17 8:59 UTC (permalink / raw) To: Laurent Riffard Cc: Jeff Mahoney, Christoph Hellwig, Andrew Morton, Dave Hansen, linux-kernel, linux-fsdevel, reiserfs-devel On Mon, Oct 15, 2007 at 10:06:04PM +0200, Laurent Riffard wrote: > > Here's a patch I worked up the other night that kills off struct file > > completely from the xattr code. I've tested it locally. > > Sorry Jeff, your patch does not apply on 2.6.23-mm1. The 'struct file' > removal from reiserfs_xattr_ function is already in -mm > (make-reiserfs-stop-using-struct-file-for-internal.patch). We'll need to drop Dave's patch first. Andrew, can you drop it and put this one in instead? ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs [not found] ` <4713B1E7.2010504@suse.com> 2007-10-15 20:06 ` Laurent Riffard @ 2007-10-17 8:58 ` Christoph Hellwig 2007-10-17 14:55 ` Jeff Mahoney 1 sibling, 1 reply; 15+ messages in thread From: Christoph Hellwig @ 2007-10-17 8:58 UTC (permalink / raw) To: Jeff Mahoney Cc: Christoph Hellwig, Laurent Riffard, Andrew Morton, Dave Hansen, linux-kernel, linux-fsdevel, reiserfs-devel On Mon, Oct 15, 2007 at 02:31:03PM -0400, Jeff Mahoney wrote: > Here's a patch I worked up the other night that kills off struct file > completely from the xattr code. I've tested it locally. Looks like a merge of Dave's and my patch :) ACK from me, I don't care whether it's one or two patches. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: 2.6.23-mm1: BUG in reiserfs_delete_xattrs 2007-10-17 8:58 ` Christoph Hellwig @ 2007-10-17 14:55 ` Jeff Mahoney 0 siblings, 0 replies; 15+ messages in thread From: Jeff Mahoney @ 2007-10-17 14:55 UTC (permalink / raw) To: Christoph Hellwig, Jeff Mahoney, Laurent Riffard, Andrew Morton, Dave Hansen -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Christoph Hellwig wrote: > On Mon, Oct 15, 2007 at 02:31:03PM -0400, Jeff Mahoney wrote: >> Here's a patch I worked up the other night that kills off struct file >> completely from the xattr code. I've tested it locally. > > Looks like a merge of Dave's and my patch :) > > ACK from me, I don't care whether it's one or two patches. Yeah, it probably is. I did it from scratch since it was my mess, and the patches I saw were against -mm. *shrug* Likewise, I don't care if it's one or two. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHFiJHLPWxlyuTD7IRAojqAJwKS+eL1yCtUVHzBSFUxjjkW6KgPwCcDRUE Q1V7tCPcT9h0a8ahVmYn+ms= =5kMt -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2007-10-17 14:55 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20071011213126.cf92efb7.akpm@linux-foundation.org>
2007-10-12 20:38 ` 2.6.23-mm1 Laurent Riffard
2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton
2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard
2007-10-13 10:10 ` Jens Axboe
2007-10-14 13:09 ` Edward Shishkin
2007-10-15 16:13 ` 2.6.23-mm1 Zan Lynx
2007-10-14 22:34 ` 2.6.23-mm1: BUG in reiserfs_delete_xattrs Laurent Riffard
2007-10-15 8:40 ` Christoph Hellwig
2007-10-15 18:31 ` Jeff Mahoney
2007-10-15 19:51 ` Laurent Riffard
[not found] ` <4713B1E7.2010504@suse.com>
2007-10-15 20:06 ` Laurent Riffard
2007-10-15 20:23 ` Jeff Mahoney
2007-10-17 8:59 ` Christoph Hellwig
2007-10-17 8:58 ` Christoph Hellwig
2007-10-17 14:55 ` Jeff Mahoney
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).