From: Ivan Shapovalov <intelfx@intelfx.name>
To: reiserfs-devel@vger.kernel.org
Cc: Edward Shishkin <edward.shishkin@gmail.com>,
Ivan Shapovalov <intelfx@intelfx.name>
Subject: [PATCH] reiser4: implement ->rename2() of struct inode_operations.
Date: Fri, 30 Sep 2016 09:49:37 +0300 [thread overview]
Message-ID: <20160930064937.21460-1-intelfx@intelfx.name> (raw)
For now, only support the basic case of flags == 0.
Also support the case of flags == RENAME_NOREPLACE, because it is a no-op for
local filesystems (destination existence is already checked by VFS).
Thus no functional changes to the existing code.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
---
plugin/inode_ops_rename.c | 47 ++++++++++++++++++++++++++++++++++++++++-------
plugin/object.c | 2 +-
plugin/object.h | 5 +++--
3 files changed, 44 insertions(+), 10 deletions(-)
diff --git a/plugin/inode_ops_rename.c b/plugin/inode_ops_rename.c
index 4d461dc..ddb7bf5 100644
--- a/plugin/inode_ops_rename.c
+++ b/plugin/inode_ops_rename.c
@@ -288,7 +288,7 @@ int reiser4_find_entry(struct inode *, struct dentry *, lock_handle * ,
znode_lock_mode, reiser4_dir_entry_desc *);
int reiser4_update_dir(struct inode *);
-/* this is common implementation of vfs's rename method of struct
+/* this is common implementation of vfs's rename2 method of struct
inode_operations
See comments in the body.
@@ -299,12 +299,13 @@ int reiser4_update_dir(struct inode *);
entry. This should be re-considered when more than one different
directory plugin will be implemented.
*/
-int reiser4_rename_common(struct inode *old_dir /* directory where @old
- * is located */ ,
- struct dentry *old_name /* old name */ ,
- struct inode *new_dir /* directory where @new
- * is located */ ,
- struct dentry *new_name/* new name */)
+int reiser4_rename2_common(struct inode *old_dir /* directory where @old
+ * is located */ ,
+ struct dentry *old_name /* old name */ ,
+ struct inode *new_dir /* directory where @new
+ * is located */ ,
+ struct dentry *new_name /* new name */ ,
+ unsigned flags /* specific flags */)
{
/* From `The Open Group Base Specifications Issue 6'
@@ -384,6 +385,26 @@ int reiser4_rename_common(struct inode *old_dir /* directory where @old
[N/A]
*/
+
+ /* From Documentation/filesystems/vfs.txt:
+
+ rename2: this has an additional flags argument compared to rename.
+ f no flags are supported by the filesystem then this method
+ need not be implemented. If some flags are supported then the
+ filesystem must return -EINVAL for any unsupported or unknown
+ flags. Currently the following flags are implemented:
+ (1) RENAME_NOREPLACE: this flag indicates that if the target
+ of the rename exists the rename should fail with -EEXIST
+ instead of replacing the target. The VFS already checks for
+ existence, so for local filesystems the RENAME_NOREPLACE
+ implementation is equivalent to plain rename.
+ (2) RENAME_EXCHANGE: exchange source and target. Both must
+ exist; this is checked by the VFS. Unlike plain rename,
+ source and target may be of different type.
+ */
+
+ static const unsigned supported_flags = RENAME_NOREPLACE;
+
reiser4_context *ctx;
int result;
int is_dir; /* is @old_name directory */
@@ -405,6 +426,18 @@ int reiser4_rename_common(struct inode *old_dir /* directory where @old
if (IS_ERR(ctx))
return PTR_ERR(ctx);
+ /*
+ * Check rename2() flags.
+ *
+ * "If some flags are supported then the filesystem must return
+ * -EINVAL for any unsupported or unknown flags."
+ *
+ * We support:
+ * - RENAME_NOREPLACE (no-op)
+ */
+ if ((flags & supported_flags) != flags)
+ return RETERR(-EINVAL);
+
old_entry = kzalloc(3 * sizeof(*old_entry) + 2 * sizeof(*new_lh) +
sizeof(*dotdot_name) + sizeof(*dataonstack),
reiser4_ctx_gfp_mask_get());
diff --git a/plugin/object.c b/plugin/object.c
index 7b0c2d2..9d10a0c 100644
--- a/plugin/object.c
+++ b/plugin/object.c
@@ -179,7 +179,7 @@ static struct inode_operations directory_i_ops = {
.mkdir = reiser4_mkdir_common,
.rmdir = reiser4_unlink_common,
.mknod = reiser4_mknod_common,
- .rename = reiser4_rename_common,
+ .rename2 = reiser4_rename2_common,
.permission = reiser4_permission_common,
.setattr = reiser4_setattr_common,
.getattr = reiser4_getattr_common
diff --git a/plugin/object.h b/plugin/object.h
index b5fd962..c69c6b0 100644
--- a/plugin/object.h
+++ b/plugin/object.h
@@ -22,8 +22,9 @@ int reiser4_symlink_common(struct inode *parent, struct dentry *dentry,
const char *linkname);
int reiser4_mknod_common(struct inode *parent, struct dentry *dentry,
umode_t mode, dev_t rdev);
-int reiser4_rename_common(struct inode *old_dir, struct dentry *old_name,
- struct inode *new_dir, struct dentry *new_name);
+int reiser4_rename2_common(struct inode *old_dir, struct dentry *old_name,
+ struct inode *new_dir, struct dentry *new_name,
+ unsigned flags);
const char *reiser4_get_link_common(struct dentry *, struct inode *inode,
struct delayed_call *done);
int reiser4_permission_common(struct inode *, int mask);
--
2.10.0
next reply other threads:[~2016-09-30 6:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-30 6:49 Ivan Shapovalov [this message]
2016-10-04 15:40 ` [PATCH] reiser4: implement ->rename2() of struct inode_operations Edward Shishkin
-- strict thread matches above, loose matches on Subject: below --
2015-02-26 23:21 Ivan Shapovalov
2015-02-27 11:57 ` Edward Shishkin
2015-02-27 17:42 ` Ivan Shapovalov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160930064937.21460-1-intelfx@intelfx.name \
--to=intelfx@intelfx.name \
--cc=edward.shishkin@gmail.com \
--cc=reiserfs-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).