From: Sandro Souza <escovadordebits@gmail.com>
To: ReiserFS Development List <reiserfs-devel@vger.kernel.org>
Subject: Testing a custom kernel (2.6.39) with native reiser4 support
Date: Mon, 14 May 2012 19:55:33 -0300 [thread overview]
Message-ID: <CANish_kwKO1EUys-QS44oJeD1T7daFMn1QA0LdPC1ZVG6_RtOg@mail.gmail.com> (raw)
Hello my friends.
I made a new custom distro based on debian squeeze, but with 2.6.39
kernel, patched with reiser4
(http://downloads.sourceforge.net/project/reiser4/reiser4-for-linux-2.6/reiser4-for-2.6.39-1.patch.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Freiser4%2Ffiles%2Freiser4-for-linux-2.6%2F&ts=1337035240&use_mirror=ufpr).
Trying to copy a folder from a reiser3 partition to a reiser4
partition, I got error messages.
Testing my custom kernel with "preemption model" in "Preemptible
Kernel", I got these messages:
[ 286.945598] ------------[ cut here ]------------
[ 286.945609] kernel BUG at fs/reiser4/block_alloc.c:151!
[ 286.945617] invalid opcode: 0000 [#1] PREEMPT SMP
[ 286.945626] last sysfs file:
/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdc/sdc1/uevent
[ 286.945634] CPU 0
[ 286.945641] Modules linked in: mperf cpufreq_powersave
cpufreq_stats cpufreq_userspace cpufreq_conservative ppdev lp
bluetooth rfkill binfmt_misc fuse loop snd_intel8x0 snd_ac97_codec
ac97_bus snd_pcm snd_seq snd_timer snd_seq_device processor tpm_tis
tpm parport_pc parport thermal_sys snd tpm_bios psmouse button
soundcore snd_page_alloc ac i2c_piix4 i2c_core serio_raw pcspkr evdev
joydev usbhid hid ide_cd_mod cdrom sd_mod ata_generic crc_t10dif
pata_acpi ata_piix usb_storage ohci_hcd ide_pci_generic ahci libahci
ehci_hcd libata piix scsi_mod usbcore e1000 ide_core [last unloaded:
scsi_wait_scan]
[ 286.945676]
[ 286.945683] Pid: 2433, comm: nautilus Not tainted 2.6.39-reiser4 #1
innotek GmbH VirtualBox
[ 286.945691] RIP: 0010:[<ffffffff81178fae>] [<ffffffff81178fae>]
grabbed2flush_reserved_nolock+0x33/0x7b
[ 286.945704] RSP: 0018:ffff880014219b38 EFLAGS: 00010297
[ 286.945711] RAX: ffff88003b3df900 RBX: ffff88002fe75000 RCX: 0000000000112ef7
[ 286.945718] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88003d3801c0
[ 286.945724] RBP: 0000000000000001 R08: 0000000000000000 R09: 000000000000000b
[ 286.945730] R10: dead000000100100 R11: ffff880014219c50 R12: ffff88003d385500
[ 286.945737] R13: ffff8800119bb000 R14: ffff880014219c38 R15: 0000000000001000
[ 286.945744] FS: 00007f126661d700(0000) GS:ffff88003fc00000(0000)
knlGS:0000000000000000
[ 286.945750] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 286.945756] CR2: 00007fba4a3df010 CR3: 000000003be2b000 CR4: 00000000000006f0
[ 286.945766] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 286.945772] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 286.945778] Process nautilus (pid: 2433, threadinfo
ffff880014218000, task ffff88001406e940)
[ 286.945783] Stack:
[ 286.945788] 0000000000000000 ffff8800119bb000 ffff88003d3801c0
ffffffff8117b484
[ 286.945795] ffff8800119bb050 ffff8800119bb000 0000000000000000
ffffffff8117b529
[ 286.945802] 0000000000000000 ffff88003d385608 0000000000000000
ffffffff8118e00d
[ 286.945808] Call Trace:
[ 286.945817] [<ffffffff8117b484>] ? jnode_make_dirty_locked+0x112/0x18f
[ 286.945824] [<ffffffff8117b529>] ? znode_make_dirty+0x28/0x87
[ 286.945831] [<ffffffff8118e00d>] ? update_sd+0x344/0x3a4
[ 286.945838] [<ffffffff81387a46>] ? sub_preempt_count+0x83/0x94
[ 286.945845] [<ffffffff8118e096>] ? write_sd_by_inode_common+0x29/0x92
[ 286.945852] [<ffffffff8103cb67>] ? get_parent_ip+0x9/0x1b
[ 286.945858] [<ffffffff8118512b>] ? reiser4_dirty_inode+0x19/0x73
[ 286.945865] [<ffffffff810edecb>] ? T.1132+0x12/0x2e
[ 286.945872] [<ffffffff8104b288>] ? current_fs_time+0x1e/0x24
[ 286.945878] [<ffffffff81112ddb>] ? __mark_inode_dirty+0x28/0x1c8
[ 286.945885] [<ffffffff81108169>] ? file_update_time+0xf7/0x126
[ 286.945891] [<ffffffff811924ee>] ? reiser4_write_end_careful+0x147/0x184
[ 286.945897] [<ffffffff81115083>] ? pipe_to_file+0x152/0x161
[ 286.945903] [<ffffffff81387af5>] ? add_preempt_count+0x9e/0xa0
[ 286.945909] [<ffffffff81114f31>] ? generic_file_splice_write+0x133/0x133
[ 286.945914] [<ffffffff811143cb>] ? splice_from_pipe_feed+0x6d/0xed
[ 286.945920] [<ffffffff81114eb3>] ? generic_file_splice_write+0xb5/0x133
[ 286.945933] [<ffffffff811162a6>] ? sys_splice+0x2f8/0x3d2
[ 286.945939] [<ffffffff8138a7d2>] ? system_call_fastpath+0x16/0x1b
[ 286.945944] Code: 25 80 cc 00 00 53 48 83 ec 08 48 8b 80 38 05 00
00 48 8b 90 a0 00 00 00 48 8b 9a 88 02 00 00 48 8b 90 b0 00 00 00 48
39 f2 73 04 <0f> 0b eb fe 48 29 f2 48 89 90 b0 00 00 00 8b 07 89 c2 c1
fa 10
[ 286.945968] RIP [<ffffffff81178fae>] grabbed2flush_reserved_nolock+0x33/0x7b
[ 286.945974] RSP <ffff880014219b38>
[ 286.945979] ---[ end trace cd39088cc6246a13 ]---
Testing my custom kernel with "preemption model" in "Voluntary Kernel
Preemption", I got these messages:
[ 234.212538] ------------[ cut here ]------------
[ 234.212549] kernel BUG at fs/reiser4/block_alloc.c:151!
[ 234.212551] invalid opcode: 0000 [#1] SMP
[ 234.212553] last sysfs file:
/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdc/sdc1/uevent
[ 234.212556] CPU 0
[ 234.212557] Modules linked in: mperf cpufreq_powersave
cpufreq_stats cpufreq_userspace cpufreq_conservative ppdev lp
bluetooth rfkill binfmt_misc fuse loop snd_intel8x0 i2c_piix4
snd_ac97_codec psmouse joydev processor thermal_sys evdev i2c_core
parport_pc parport tpm_tis pcspkr tpm serio_raw tpm_bios ac ac97_bus
snd_pcm snd_seq snd_timer snd_seq_device snd button soundcore
snd_page_alloc usbhid hid ide_cd_mod cdrom ata_generic sd_mod
pata_acpi ata_piix crc_t10dif usb_storage ide_pci_generic ohci_hcd
ahci libahci ehci_hcd libata piix scsi_mod usbcore e1000 ide_core
[last unloaded: scsi_wait_scan]
[ 234.212581]
[ 234.212583] Pid: 2530, comm: nautilus Not tainted 2.6.39-reiser4 #1
innotek GmbH VirtualBox
[ 234.212585] RIP: 0010:[<ffffffff81173400>] [<ffffffff81173400>]
grabbed2flush_reserved_nolock+0x33/0x87
[ 234.212591] RSP: 0018:ffff88003da41b68 EFLAGS: 00010297
[ 234.212592] RAX: ffff88003c939500 RBX: ffff88003bcf9800 RCX: ffff880007e49d80
[ 234.212594] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800215e41c0
[ 234.212595] RBP: 0000000000000001 R08: 0000000000000000 R09: 000000000000000b
[ 234.212596] R10: ffff88002d3b96b0 R11: ffff88003da41c80 R12: ffff880021693500
[ 234.212598] R13: ffff88001056b900 R14: ffff88003da41c68 R15: 0000000000001000
[ 234.212605] FS: 00007f94bc7cc700(0000) GS:ffff88003fc00000(0000)
knlGS:0000000000000000
[ 234.212607] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 234.212608] CR2: 0000000000428060 CR3: 000000003c197000 CR4: 00000000000006f0
[ 234.212614] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 234.212615] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 234.212617] Process nautilus (pid: 2530, threadinfo
ffff88003da40000, task ffff880026095b00)
[ 234.212618] Stack:
[ 234.212619] 0000000000000000 ffff88001056b900 ffff8800215e41c0
ffffffff81175c90
[ 234.212621] 0000000000001000 ffff88001056b900 0000000000000000
ffffffff81175d40
[ 234.212624] 0000000000000000 ffff880021693608 0000000000000000
ffffffff81188945
[ 234.212626] Call Trace:
[ 234.212630] [<ffffffff81175c90>] ? jnode_make_dirty_locked+0x112/0x19a
[ 234.212632] [<ffffffff81175d40>] ? znode_make_dirty+0x28/0xa1
[ 234.212634] [<ffffffff81188945>] ? update_sd+0x368/0x3d9
[ 234.212637] [<ffffffff81171f26>] ? insert_by_coord+0xef/0x101
[ 234.212641] [<ffffffff81199f4d>] ? ctail_insert_unprepped_cluster+0xe3/0xf2
[ 234.212643] [<ffffffff811889df>] ? write_sd_by_inode_common+0x29/0x92
[ 234.212645] [<ffffffff81175a1d>] ? jnode_get_atom+0x34/0xac
[ 234.212648] [<ffffffff8117fab1>] ? reiser4_dirty_inode+0x19/0x73
[ 234.212652] [<ffffffff81049a2c>] ? current_fs_time+0x1e/0x24
[ 234.212656] [<ffffffff810ea179>] ? kfree+0xa8/0xcc
[ 234.212659] [<ffffffff8110d9ee>] ? __mark_inode_dirty+0x22/0x1a4
[ 234.212671] [<ffffffff81103254>] ? file_update_time+0xea/0x115
[ 234.212674] [<ffffffff8118ce02>] ? reiser4_write_end_careful+0x147/0x184
[ 234.212677] [<ffffffff8110fa8c>] ? pipe_to_file+0x12f/0x13e
[ 234.212679] [<ffffffff8110f95d>] ? generic_file_splice_write+0x133/0x133
[ 234.212681] [<ffffffff8110eebb>] ? splice_from_pipe_feed+0x6d/0xed
[ 234.212684] [<ffffffff8110f8df>] ? generic_file_splice_write+0xb5/0x133
[ 234.212686] [<ffffffff811100c7>] ? sys_splice+0x2f8/0x3db
[ 234.212689] [<ffffffff81382412>] ? system_call_fastpath+0x16/0x1b
[ 234.212690] Code: 25 80 cc 00 00 53 48 83 ec 08 48 8b 80 18 05 00
00 48 8b 90 a0 00 00 00 48 8b 9a 88 02 00 00 48 8b 90 b0 00 00 00 48
39 f2 73 04 <0f> 0b eb fe 48 29 f2 48 89 90 b0 00 00 00 8b 07 89 c2 c1
fa 10
[ 234.212706] RIP [<ffffffff81173400>] grabbed2flush_reserved_nolock+0x33/0x87
[ 234.212708] RSP <ffff88003da41b68>
[ 234.212710] ---[ end trace 6e3abf5361ca3bde ]---
Please, I need help to find the right way.
Thanks in advance.
next reply other threads:[~2012-05-14 22:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 22:55 Sandro Souza [this message]
2012-05-15 10:12 ` Testing a custom kernel (2.6.39) with native reiser4 support Edward Shishkin
2012-05-15 11:14 ` Edward Shishkin
2012-05-15 11:49 ` Edward Shishkin
2012-05-21 0:12 ` Edward Shishkin
2012-05-24 17:53 ` Sandro Souza
2012-05-24 18:45 ` Edward Shishkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CANish_kwKO1EUys-QS44oJeD1T7daFMn1QA0LdPC1ZVG6_RtOg@mail.gmail.com \
--to=escovadordebits@gmail.com \
--cc=reiserfs-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).