rust-for-linux.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miguel Ojeda <ojeda@kernel.org>
To: Miguel Ojeda <ojeda@kernel.org>,
	Wedson Almeida Filho <wedsonaf@gmail.com>,
	Alex Gaynor <alex.gaynor@gmail.com>
Cc: "Boqun Feng" <boqun.feng@gmail.com>,
	"Gary Guo" <gary@garyguo.net>,
	"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
	"Benno Lossin" <benno.lossin@proton.me>,
	"Andreas Hindborg" <a.hindborg@samsung.com>,
	"Alice Ryhl" <aliceryhl@google.com>,
	rust-for-linux@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@lists.linux.dev, "Finn Behrens" <me@kloenk.dev>,
	"Masahiro Yamada" <masahiroy@kernel.org>,
	"Nathan Chancellor" <nathan@kernel.org>,
	"Nicolas Schier" <nicolas@fjasle.eu>,
	linux-kbuild@vger.kernel.org
Subject: [PATCH v2 04/13] rust: relax most deny-level lints to warnings
Date: Tue,  9 Jul 2024 18:05:59 +0200	[thread overview]
Message-ID: <20240709160615.998336-5-ojeda@kernel.org> (raw)
In-Reply-To: <20240709160615.998336-1-ojeda@kernel.org>

Since we are starting to support several Rust toolchains, lints (including
Clippy ones) now may behave differently and lint groups may include
new lints.

Therefore, to maximize the chances a given version works, relax some
deny-level lints to warnings. It may also make our lives a bit easier
while developing new code or refactoring.

To be clear, the requirements for in-tree code are still the same, since
Rust code still needs to be warning-free (patches should be clean under
`WERROR=y`) and the set of lints is not changed.

`unsafe_op_in_unsafe_fn` is left unmodified, i.e. as an error, since it is
becoming the default in the language (warn-by-default in Rust 2024 [1] and
ideally an error later on) and thus it should also be very well tested. In
addition, it is simple enough that it should not have false positives
(unlike e.g. `rust_2018_idioms`'s `explicit_outlives_requirements`).

`non_ascii_idents` is left unmodified as well, i.e. as an error, since
it is unlikely one gains any productivity during development if it
were a warning (in fact, it may be worse, since it is likely one made
a typo). In addition, it should not have false positives.

Finally, put the two `-D` ones at the top and take the chance to do one
per line.

Link: https://github.com/rust-lang/rust/pull/112038 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
---
v2:
  - Kept `non_ascii_idents` as an error. (Björn, Finn)

 Makefile      | 24 +++++++++++++-----------
 rust/Makefile |  4 ++--
 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/Makefile b/Makefile
index fea263aaa492..7ea526814fdb 100644
--- a/Makefile
+++ b/Makefile
@@ -461,17 +461,19 @@ KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 # host programs.
 export rust_common_flags := --edition=2021 \
 			    -Zbinary_dep_depinfo=y \
-			    -Dunsafe_op_in_unsafe_fn -Drust_2018_idioms \
-			    -Dunreachable_pub -Dnon_ascii_idents \
+			    -Dunsafe_op_in_unsafe_fn \
+			    -Dnon_ascii_idents \
+			    -Wrust_2018_idioms \
+			    -Wunreachable_pub \
 			    -Wmissing_docs \
-			    -Drustdoc::missing_crate_level_docs \
-			    -Dclippy::correctness -Dclippy::style \
-			    -Dclippy::suspicious -Dclippy::complexity \
-			    -Dclippy::perf \
-			    -Dclippy::let_unit_value -Dclippy::mut_mut \
-			    -Dclippy::needless_bitwise_bool \
-			    -Dclippy::needless_continue \
-			    -Dclippy::no_mangle_with_rust_abi \
+			    -Wrustdoc::missing_crate_level_docs \
+			    -Wclippy::correctness -Wclippy::style \
+			    -Wclippy::suspicious -Wclippy::complexity \
+			    -Wclippy::perf \
+			    -Wclippy::let_unit_value -Wclippy::mut_mut \
+			    -Wclippy::needless_bitwise_bool \
+			    -Wclippy::needless_continue \
+			    -Wclippy::no_mangle_with_rust_abi \
 			    -Wclippy::dbg_macro

 KBUILD_HOSTCFLAGS   := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
@@ -572,7 +574,7 @@ KBUILD_RUSTFLAGS := $(rust_common_flags) \
 		    -Csymbol-mangling-version=v0 \
 		    -Crelocation-model=static \
 		    -Zfunction-sections=n \
-		    -Dclippy::float_arithmetic
+		    -Wclippy::float_arithmetic

 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
diff --git a/rust/Makefile b/rust/Makefile
index 385378311322..bf05e65365da 100644
--- a/rust/Makefile
+++ b/rust/Makefile
@@ -367,7 +367,7 @@ ifneq ($(or $(CONFIG_ARM64),$(and $(CONFIG_RISCV),$(CONFIG_64BIT))),)
 endif

 $(obj)/core.o: private skip_clippy = 1
-$(obj)/core.o: private skip_flags = -Dunreachable_pub
+$(obj)/core.o: private skip_flags = -Wunreachable_pub
 $(obj)/core.o: private rustc_objcopy = $(foreach sym,$(redirect-intrinsics),--redefine-sym $(sym)=__rust$(sym))
 $(obj)/core.o: private rustc_target_flags = $(core-cfgs)
 $(obj)/core.o: $(RUST_LIB_SRC)/core/src/lib.rs FORCE
@@ -381,7 +381,7 @@ $(obj)/compiler_builtins.o: $(src)/compiler_builtins.rs $(obj)/core.o FORCE
 	+$(call if_changed_dep,rustc_library)

 $(obj)/alloc.o: private skip_clippy = 1
-$(obj)/alloc.o: private skip_flags = -Dunreachable_pub
+$(obj)/alloc.o: private skip_flags = -Wunreachable_pub
 $(obj)/alloc.o: private rustc_target_flags = $(alloc-cfgs)
 $(obj)/alloc.o: $(RUST_LIB_SRC)/alloc/src/lib.rs $(obj)/compiler_builtins.o FORCE
 	+$(call if_changed_dep,rustc_library)
--
2.45.2

  parent reply	other threads:[~2024-07-09 16:06 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-09 16:05 [PATCH v2 00/13] Support several Rust toolchain versions Miguel Ojeda
2024-07-09 16:05 ` [PATCH v2 01/13] rust: macros: indent list item in `paste!`'s docs Miguel Ojeda
2024-07-09 16:05 ` [PATCH v2 02/13] rust: init: simplify from `map_err` to `inspect_err` Miguel Ojeda
2024-07-09 16:05 ` [PATCH v2 03/13] rust: allow `dead_code` for never constructed bindings Miguel Ojeda
2024-07-09 16:05 ` Miguel Ojeda [this message]
2024-07-09 16:06 ` [PATCH v2 05/13] rust: simplify Clippy warning flags set Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 06/13] rust: start supporting several compiler versions Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 07/13] rust: avoid assuming a particular `bindgen` build Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 08/13] rust: work around `bindgen` 0.69.0 issue Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 09/13] rust: start supporting several `bindgen` versions Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 10/13] rust: warn about `bindgen` versions 0.66.0 and 0.66.1 Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 11/13] kbuild: rust: add `rustc-version` support Miguel Ojeda
2024-07-09 17:26   ` Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 12/13] rust: support the new `-Zub-checks` flag Miguel Ojeda
2024-07-09 16:06 ` [PATCH v2 13/13] docs: rust: quick-start: add section on Linux distributions Miguel Ojeda
2024-07-10  9:04 ` [PATCH v2 00/13] Support several Rust toolchain versions Miguel Ojeda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240709160615.998336-5-ojeda@kernel.org \
    --to=ojeda@kernel.org \
    --cc=a.hindborg@samsung.com \
    --cc=alex.gaynor@gmail.com \
    --cc=aliceryhl@google.com \
    --cc=benno.lossin@proton.me \
    --cc=bjorn3_gh@protonmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=gary@garyguo.net \
    --cc=linux-kbuild@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=me@kloenk.dev \
    --cc=nathan@kernel.org \
    --cc=nicolas@fjasle.eu \
    --cc=patches@lists.linux.dev \
    --cc=rust-for-linux@vger.kernel.org \
    --cc=wedsonaf@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).