From: FUJITA Tomonori <fujita.tomonori@gmail.com>
To: netdev@vger.kernel.org
Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch,
tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com,
benno.lossin@proton.me
Subject: [PATCH net-next v2 0/6] net: phy: add Applied Micro QT2025 PHY driver
Date: Wed, 31 Jul 2024 13:21:30 +0900 [thread overview]
Message-ID: <20240731042136.201327-1-fujita.tomonori@gmail.com> (raw)
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable.
The 2-5th patches update the PHYLIB Rust bindings. Note that 4th and
5th patches are already reviewed by Trevor and Benno.
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
v2:
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/all/20240415104701.4772-1-fujita.tomonori@gmail.com/
FUJITA Tomonori (6):
rust: sizes: add commonly used constants
rust: net::phy support probe callback
rust: net::phy implement AsRef<kernel::device::Device> trait
rust: net::phy unified read/write API for C22 and C45 registers
rust: net::phy unified genphy_read_status function for C22 and C45
registers
net: phy: add Applied Micro QT2025 PHY driver
MAINTAINERS | 8 ++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/ax88796b_rust.rs | 7 +-
drivers/net/phy/qt2025.rs | 92 +++++++++++++
rust/kernel/lib.rs | 1 +
rust/kernel/net/phy.rs | 77 ++++++-----
rust/kernel/net/phy/reg.rs | 219 +++++++++++++++++++++++++++++++
rust/kernel/sizes.rs | 26 ++++
rust/uapi/uapi_helper.h | 1 +
10 files changed, 400 insertions(+), 38 deletions(-)
create mode 100644 drivers/net/phy/qt2025.rs
create mode 100644 rust/kernel/net/phy/reg.rs
create mode 100644 rust/kernel/sizes.rs
base-commit: 0a658d088cc63745528cf0ec8a2c2df0f37742d9
--
2.34.1
next reply other threads:[~2024-07-31 4:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 4:21 FUJITA Tomonori [this message]
2024-07-31 4:21 ` [PATCH net-next v2 1/6] rust: sizes: add commonly used constants FUJITA Tomonori
2024-07-31 8:33 ` Alice Ryhl
2024-07-31 12:16 ` Andrew Lunn
2024-07-31 12:30 ` Alice Ryhl
2024-08-01 1:21 ` FUJITA Tomonori
2024-07-31 4:21 ` [PATCH net-next v2 2/6] rust: net::phy support probe callback FUJITA Tomonori
2024-07-31 8:33 ` Alice Ryhl
2024-07-31 12:24 ` Andrew Lunn
2024-07-31 12:32 ` Alice Ryhl
2024-07-31 20:57 ` Andrew Lunn
2024-08-01 9:07 ` Alice Ryhl
2024-08-01 0:17 ` FUJITA Tomonori
2024-08-01 9:07 ` Alice Ryhl
2024-07-31 4:21 ` [PATCH net-next v2 3/6] rust: net::phy implement AsRef<kernel::device::Device> trait FUJITA Tomonori
2024-07-31 8:38 ` Alice Ryhl
2024-08-01 1:03 ` FUJITA Tomonori
2024-07-31 4:21 ` [PATCH net-next v2 4/6] rust: net::phy unified read/write API for C22 and C45 registers FUJITA Tomonori
2024-07-31 4:21 ` [PATCH net-next v2 5/6] rust: net::phy unified genphy_read_status function " FUJITA Tomonori
2024-07-31 4:21 ` [PATCH net-next v2 6/6] net: phy: add Applied Micro QT2025 PHY driver FUJITA Tomonori
2024-08-01 1:55 ` FUJITA Tomonori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240731042136.201327-1-fujita.tomonori@gmail.com \
--to=fujita.tomonori@gmail.com \
--cc=andrew@lunn.ch \
--cc=benno.lossin@proton.me \
--cc=miguel.ojeda.sandonis@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=tmgross@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).