[PATCH net-next v8 0/6] net: phy: add Applied Micro QT2025 PHY driver

[PATCH net-next v8 0/6] net: phy: add Applied Micro QT2025 PHY driver

[FUJITA Tomonori]

This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.

The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].

QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).

The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.

The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.

[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/

v8
- add Debug trait to reg::{C22 and C45}
- add Andrew's Reviewed-by
v7: https://lore.kernel.org/netdev/20240824020617.113828-1-fujita.tomonori@gmail.com/
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/

FUJITA Tomonori (6):
  rust: sizes: add commonly used constants
  rust: net::phy support probe callback
  rust: net::phy implement AsRef<kernel::device::Device> trait
  rust: net::phy unified read/write API for C22 and C45 registers
  rust: net::phy unified genphy_read_status function for C22 and C45
    registers
  net: phy: add Applied Micro QT2025 PHY driver

 MAINTAINERS                      |   9 ++
 drivers/net/phy/Kconfig          |   7 +
 drivers/net/phy/Makefile         |   1 +
 drivers/net/phy/ax88796b_rust.rs |   7 +-
 drivers/net/phy/qt2025.rs        | 103 ++++++++++++++
 rust/kernel/lib.rs               |   1 +
 rust/kernel/net/phy.rs           |  90 +++++++------
 rust/kernel/net/phy/reg.rs       | 224 +++++++++++++++++++++++++++++++
 rust/kernel/sizes.rs             |  26 ++++
 rust/uapi/uapi_helper.h          |   1 +
 10 files changed, 426 insertions(+), 43 deletions(-)
 create mode 100644 drivers/net/phy/qt2025.rs
 create mode 100644 rust/kernel/net/phy/reg.rs
 create mode 100644 rust/kernel/sizes.rs


base-commit: e5899b60f52a7591cfc2a2dec3e83710975117d7
-- 
2.34.1

[PATCH net-next v8 1/6] rust: sizes: add commonly used constants

[FUJITA Tomonori]

Add rust equivalent to include/linux/sizes.h, makes code more
readable. Only SZ_*K that QT2025 PHY driver uses are added.

Make generated constants accessible with a proper type.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/lib.rs   |  1 +
 rust/kernel/sizes.rs | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 rust/kernel/sizes.rs

diff --git a/rust/kernel/lib.rs b/rust/kernel/lib.rs
index 274bdc1b0a82..58ed400198bf 100644
--- a/rust/kernel/lib.rs
+++ b/rust/kernel/lib.rs
@@ -43,6 +43,7 @@
 pub mod page;
 pub mod prelude;
 pub mod print;
+pub mod sizes;
 mod static_assert;
 #[doc(hidden)]
 pub mod std_vendor;
diff --git a/rust/kernel/sizes.rs b/rust/kernel/sizes.rs
new file mode 100644
index 000000000000..834c343e4170
--- /dev/null
+++ b/rust/kernel/sizes.rs
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Commonly used sizes.
+//!
+//! C headers: [`include/linux/sizes.h`](srctree/include/linux/sizes.h).
+
+/// 0x00000400
+pub const SZ_1K: usize = bindings::SZ_1K as usize;
+/// 0x00000800
+pub const SZ_2K: usize = bindings::SZ_2K as usize;
+/// 0x00001000
+pub const SZ_4K: usize = bindings::SZ_4K as usize;
+/// 0x00002000
+pub const SZ_8K: usize = bindings::SZ_8K as usize;
+/// 0x00004000
+pub const SZ_16K: usize = bindings::SZ_16K as usize;
+/// 0x00008000
+pub const SZ_32K: usize = bindings::SZ_32K as usize;
+/// 0x00010000
+pub const SZ_64K: usize = bindings::SZ_64K as usize;
+/// 0x00020000
+pub const SZ_128K: usize = bindings::SZ_128K as usize;
+/// 0x00040000
+pub const SZ_256K: usize = bindings::SZ_256K as usize;
+/// 0x00080000
+pub const SZ_512K: usize = bindings::SZ_512K as usize;
-- 
2.34.1

[PATCH net-next v8 2/6] rust: net::phy support probe callback

[FUJITA Tomonori]

Support phy_driver probe callback, used to set up device-specific
structures.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/net/phy.rs | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index fd40b703d224..5e8137a1972f 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -338,6 +338,21 @@ impl<T: Driver> Adapter<T> {
         })
     }
 
+    /// # Safety
+    ///
+    /// `phydev` must be passed by the corresponding callback in `phy_driver`.
+    unsafe extern "C" fn probe_callback(phydev: *mut bindings::phy_device) -> core::ffi::c_int {
+        from_result(|| {
+            // SAFETY: This callback is called only in contexts
+            // where we can exclusively access `phy_device` because
+            // it's not published yet, so the accessors on `Device` are okay
+            // to call.
+            let dev = unsafe { Device::from_raw(phydev) };
+            T::probe(dev)?;
+            Ok(0)
+        })
+    }
+
     /// # Safety
     ///
     /// `phydev` must be passed by the corresponding callback in `phy_driver`.
@@ -511,6 +526,11 @@ pub const fn create_phy_driver<T: Driver>() -> DriverVTable {
         } else {
             None
         },
+        probe: if T::HAS_PROBE {
+            Some(Adapter::<T>::probe_callback)
+        } else {
+            None
+        },
         get_features: if T::HAS_GET_FEATURES {
             Some(Adapter::<T>::get_features_callback)
         } else {
@@ -583,6 +603,11 @@ fn soft_reset(_dev: &mut Device) -> Result {
         kernel::build_error(VTABLE_DEFAULT_ERROR)
     }
 
+    /// Sets up device-specific structures during discovery.
+    fn probe(_dev: &mut Device) -> Result {
+        kernel::build_error(VTABLE_DEFAULT_ERROR)
+    }
+
     /// Probes the hardware to determine what abilities it has.
     fn get_features(_dev: &mut Device) -> Result {
         kernel::build_error(VTABLE_DEFAULT_ERROR)
-- 
2.34.1

[PATCH net-next v8 3/6] rust: net::phy implement AsRef<kernel::device::Device> trait

[FUJITA Tomonori]

Implement AsRef<kernel::device::Device> trait for Device. A PHY driver
needs a reference to device::Device to call the firmware API.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/net/phy.rs | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index 5e8137a1972f..b16e8c10a0a2 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -7,8 +7,7 @@
 //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h).
 
 use crate::{error::*, prelude::*, types::Opaque};
-
-use core::marker::PhantomData;
+use core::{marker::PhantomData, ptr::addr_of_mut};
 
 /// PHY state machine states.
 ///
@@ -58,8 +57,9 @@ pub enum DuplexMode {
 ///
 /// # Invariants
 ///
-/// Referencing a `phy_device` using this struct asserts that you are in
-/// a context where all methods defined on this struct are safe to call.
+/// - Referencing a `phy_device` using this struct asserts that you are in
+///   a context where all methods defined on this struct are safe to call.
+/// - This struct always has a valid `self.0.mdio.dev`.
 ///
 /// [`struct phy_device`]: srctree/include/linux/phy.h
 // During the calls to most functions in [`Driver`], the C side (`PHYLIB`) holds a lock that is
@@ -76,9 +76,11 @@ impl Device {
     ///
     /// # Safety
     ///
-    /// For the duration of 'a, the pointer must point at a valid `phy_device`,
-    /// and the caller must be in a context where all methods defined on this struct
-    /// are safe to call.
+    /// For the duration of `'a`,
+    /// - the pointer must point at a valid `phy_device`, and the caller
+    ///   must be in a context where all methods defined on this struct
+    ///   are safe to call.
+    /// - `(*ptr).mdio.dev` must be a valid.
     unsafe fn from_raw<'a>(ptr: *mut bindings::phy_device) -> &'a mut Self {
         // CAST: `Self` is a `repr(transparent)` wrapper around `bindings::phy_device`.
         let ptr = ptr.cast::<Self>();
@@ -302,6 +304,14 @@ pub fn genphy_read_abilities(&mut self) -> Result {
     }
 }
 
+impl AsRef<kernel::device::Device> for Device {
+    fn as_ref(&self) -> &kernel::device::Device {
+        let phydev = self.0.get();
+        // SAFETY: The struct invariant ensures that `mdio.dev` is valid.
+        unsafe { kernel::device::Device::as_ref(addr_of_mut!((*phydev).mdio.dev)) }
+    }
+}
+
 /// Defines certain other features this PHY supports (like interrupts).
 ///
 /// These flag values are used in [`Driver::FLAGS`].
-- 
2.34.1

[PATCH net-next v8 4/6] rust: net::phy unified read/write API for C22 and C45 registers

[FUJITA Tomonori]

Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.

Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 MAINTAINERS                      |   1 +
 drivers/net/phy/ax88796b_rust.rs |   7 +-
 rust/kernel/net/phy.rs           |  31 ++---
 rust/kernel/net/phy/reg.rs       | 196 +++++++++++++++++++++++++++++++
 rust/uapi/uapi_helper.h          |   1 +
 5 files changed, 209 insertions(+), 27 deletions(-)
 create mode 100644 rust/kernel/net/phy/reg.rs

diff --git a/MAINTAINERS b/MAINTAINERS
index 30a9b9450e11..ec395140668e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8357,6 +8357,7 @@ L:	netdev@vger.kernel.org
 L:	rust-for-linux@vger.kernel.org
 S:	Maintained
 F:	rust/kernel/net/phy.rs
+F:	rust/kernel/net/phy/reg.rs
 
 EXEC & BINFMT API, ELF
 R:	Eric Biederman <ebiederm@xmission.com>
diff --git a/drivers/net/phy/ax88796b_rust.rs b/drivers/net/phy/ax88796b_rust.rs
index 5c92572962dc..8c7eb009d9fc 100644
--- a/drivers/net/phy/ax88796b_rust.rs
+++ b/drivers/net/phy/ax88796b_rust.rs
@@ -6,7 +6,7 @@
 //! C version of this driver: [`drivers/net/phy/ax88796b.c`](./ax88796b.c)
 use kernel::{
     c_str,
-    net::phy::{self, DeviceId, Driver},
+    net::phy::{self, reg::C22, DeviceId, Driver},
     prelude::*,
     uapi,
 };
@@ -24,7 +24,6 @@
     license: "GPL",
 }
 
-const MII_BMCR: u16 = uapi::MII_BMCR as u16;
 const BMCR_SPEED100: u16 = uapi::BMCR_SPEED100 as u16;
 const BMCR_FULLDPLX: u16 = uapi::BMCR_FULLDPLX as u16;
 
@@ -33,7 +32,7 @@
 // Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
 // such as used on the Individual Computers' X-Surf 100 Zorro card.
 fn asix_soft_reset(dev: &mut phy::Device) -> Result {
-    dev.write(uapi::MII_BMCR as u16, 0)?;
+    dev.write(C22::BMCR, 0)?;
     dev.genphy_soft_reset()
 }
 
@@ -55,7 +54,7 @@ fn read_status(dev: &mut phy::Device) -> Result<u16> {
         }
         // If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
         // linkmode so use MII_BMCR as default values.
-        let ret = dev.read(MII_BMCR)?;
+        let ret = dev.read(C22::BMCR)?;
 
         if ret & BMCR_SPEED100 != 0 {
             dev.set_speed(uapi::SPEED_100);
diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index b16e8c10a0a2..45866db14c76 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -9,6 +9,8 @@
 use crate::{error::*, prelude::*, types::Opaque};
 use core::{marker::PhantomData, ptr::addr_of_mut};
 
+pub mod reg;
+
 /// PHY state machine states.
 ///
 /// Corresponds to the kernel's [`enum phy_state`].
@@ -177,32 +179,15 @@ pub fn set_duplex(&mut self, mode: DuplexMode) {
         unsafe { (*phydev).duplex = v };
     }
 
-    /// Reads a given C22 PHY register.
+    /// Reads a PHY register.
     // This function reads a hardware register and updates the stats so takes `&mut self`.
-    pub fn read(&mut self, regnum: u16) -> Result<u16> {
-        let phydev = self.0.get();
-        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
-        // So it's just an FFI call, open code of `phy_read()` with a valid `phy_device` pointer
-        // `phydev`.
-        let ret = unsafe {
-            bindings::mdiobus_read((*phydev).mdio.bus, (*phydev).mdio.addr, regnum.into())
-        };
-        if ret < 0 {
-            Err(Error::from_errno(ret))
-        } else {
-            Ok(ret as u16)
-        }
+    pub fn read<R: reg::Register>(&mut self, reg: R) -> Result<u16> {
+        reg.read(self)
     }
 
-    /// Writes a given C22 PHY register.
-    pub fn write(&mut self, regnum: u16, val: u16) -> Result {
-        let phydev = self.0.get();
-        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
-        // So it's just an FFI call, open code of `phy_write()` with a valid `phy_device` pointer
-        // `phydev`.
-        to_result(unsafe {
-            bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, regnum.into(), val)
-        })
+    /// Writes a PHY register.
+    pub fn write<R: reg::Register>(&mut self, reg: R, val: u16) -> Result {
+        reg.write(self, val)
     }
 
     /// Reads a paged register.
diff --git a/rust/kernel/net/phy/reg.rs b/rust/kernel/net/phy/reg.rs
new file mode 100644
index 000000000000..4563737a9675
--- /dev/null
+++ b/rust/kernel/net/phy/reg.rs
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+
+// Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@gmail.com>
+
+//! PHY register interfaces.
+//!
+//! This module provides support for accessing PHY registers in the
+//! Ethernet management interface clauses 22 and 45 register namespaces, as
+//! defined in IEEE 802.3.
+
+use super::Device;
+use crate::build_assert;
+use crate::error::*;
+use crate::uapi;
+
+mod private {
+    /// Marker that a trait cannot be implemented outside of this crate
+    pub trait Sealed {}
+}
+
+/// Accesses PHY registers.
+///
+/// This trait is used to implement the unified interface to access
+/// C22 and C45 PHY registers.
+///
+/// # Examples
+///
+/// ```ignore
+/// fn link_change_notify(dev: &mut Device) {
+///     // read C22 BMCR register
+///     dev.read(C22::BMCR);
+///     // read C45 PMA/PMD control 1 register
+///     dev.read(C45::new(Mmd::PMAPMD, 0));
+/// }
+/// ```
+pub trait Register: private::Sealed {
+    /// Reads a PHY register.
+    fn read(&self, dev: &mut Device) -> Result<u16>;
+
+    /// Writes a PHY register.
+    fn write(&self, dev: &mut Device, val: u16) -> Result;
+}
+
+/// A single MDIO clause 22 register address (5 bits).
+#[derive(Copy, Clone, Debug)]
+pub struct C22(u8);
+
+impl C22 {
+    /// Basic mode control.
+    pub const BMCR: Self = C22(0x00);
+    /// Basic mode status.
+    pub const BMSR: Self = C22(0x01);
+    /// PHY identifier 1.
+    pub const PHYSID1: Self = C22(0x02);
+    /// PHY identifier 2.
+    pub const PHYSID2: Self = C22(0x03);
+    /// Auto-negotiation advertisement.
+    pub const ADVERTISE: Self = C22(0x04);
+    /// Auto-negotiation link partner base page ability.
+    pub const LPA: Self = C22(0x05);
+    /// Auto-negotiation expansion.
+    pub const EXPANSION: Self = C22(0x06);
+    /// Auto-negotiation next page transmit.
+    pub const NEXT_PAGE_TRANSMIT: Self = C22(0x07);
+    /// Auto-negotiation link partner received next page.
+    pub const LP_RECEIVED_NEXT_PAGE: Self = C22(0x08);
+    /// Master-slave control.
+    pub const MASTER_SLAVE_CONTROL: Self = C22(0x09);
+    /// Master-slave status.
+    pub const MASTER_SLAVE_STATUS: Self = C22(0x0a);
+    /// PSE Control.
+    pub const PSE_CONTROL: Self = C22(0x0b);
+    /// PSE Status.
+    pub const PSE_STATUS: Self = C22(0x0c);
+    /// MMD Register control.
+    pub const MMD_CONTROL: Self = C22(0x0d);
+    /// MMD Register address data.
+    pub const MMD_DATA: Self = C22(0x0e);
+    /// Extended status.
+    pub const EXTENDED_STATUS: Self = C22(0x0f);
+
+    /// Creates a new instance of `C22` with a vendor specific register.
+    pub const fn vendor_specific<const N: u8>() -> Self {
+        build_assert!(
+            N > 0x0f && N < 0x20,
+            "Vendor-specific register address must be between 16 and 31"
+        );
+        C22(N)
+    }
+}
+
+impl private::Sealed for C22 {}
+
+impl Register for C22 {
+    fn read(&self, dev: &mut Device) -> Result<u16> {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+        // So it's just an FFI call, open code of `phy_read()` with a valid `phy_device` pointer
+        // `phydev`.
+        let ret = unsafe {
+            bindings::mdiobus_read((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into())
+        };
+        to_result(ret)?;
+        Ok(ret as u16)
+    }
+
+    fn write(&self, dev: &mut Device, val: u16) -> Result {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+        // So it's just an FFI call, open code of `phy_write()` with a valid `phy_device` pointer
+        // `phydev`.
+        to_result(unsafe {
+            bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into(), val)
+        })
+    }
+}
+
+/// A single MDIO clause 45 register device and address.
+#[derive(Copy, Clone, Debug)]
+pub struct Mmd(u8);
+
+impl Mmd {
+    /// Physical Medium Attachment/Dependent.
+    pub const PMAPMD: Self = Mmd(uapi::MDIO_MMD_PMAPMD as u8);
+    /// WAN interface sublayer.
+    pub const WIS: Self = Mmd(uapi::MDIO_MMD_WIS as u8);
+    /// Physical coding sublayer.
+    pub const PCS: Self = Mmd(uapi::MDIO_MMD_PCS as u8);
+    /// PHY Extender sublayer.
+    pub const PHYXS: Self = Mmd(uapi::MDIO_MMD_PHYXS as u8);
+    /// DTE Extender sublayer.
+    pub const DTEXS: Self = Mmd(uapi::MDIO_MMD_DTEXS as u8);
+    /// Transmission convergence.
+    pub const TC: Self = Mmd(uapi::MDIO_MMD_TC as u8);
+    /// Auto negotiation.
+    pub const AN: Self = Mmd(uapi::MDIO_MMD_AN as u8);
+    /// Separated PMA (1).
+    pub const SEPARATED_PMA1: Self = Mmd(8);
+    /// Separated PMA (2).
+    pub const SEPARATED_PMA2: Self = Mmd(9);
+    /// Separated PMA (3).
+    pub const SEPARATED_PMA3: Self = Mmd(10);
+    /// Separated PMA (4).
+    pub const SEPARATED_PMA4: Self = Mmd(11);
+    /// OFDM PMA/PMD.
+    pub const OFDM_PMAPMD: Self = Mmd(12);
+    /// Power unit.
+    pub const POWER_UNIT: Self = Mmd(13);
+    /// Clause 22 extension.
+    pub const C22_EXT: Self = Mmd(uapi::MDIO_MMD_C22EXT as u8);
+    /// Vendor specific 1.
+    pub const VEND1: Self = Mmd(uapi::MDIO_MMD_VEND1 as u8);
+    /// Vendor specific 2.
+    pub const VEND2: Self = Mmd(uapi::MDIO_MMD_VEND2 as u8);
+}
+
+/// A single MDIO clause 45 register device and address.
+///
+/// Clause 45 uses a 5-bit device address to access a specific MMD within
+/// a port, then a 16-bit register address to access a location within
+/// that device. `C45` represents this by storing a [`Mmd`] and
+/// a register number.
+pub struct C45 {
+    devad: Mmd,
+    regnum: u16,
+}
+
+impl C45 {
+    /// Creates a new instance of `C45`.
+    pub fn new(devad: Mmd, regnum: u16) -> Self {
+        Self { devad, regnum }
+    }
+}
+
+impl private::Sealed for C45 {}
+
+impl Register for C45 {
+    fn read(&self, dev: &mut Device) -> Result<u16> {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+        // So it's just an FFI call.
+        let ret =
+            unsafe { bindings::phy_read_mmd(phydev, self.devad.0.into(), self.regnum.into()) };
+        to_result(ret)?;
+        Ok(ret as u16)
+    }
+
+    fn write(&self, dev: &mut Device, val: u16) -> Result {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+        // So it's just an FFI call.
+        to_result(unsafe {
+            bindings::phy_write_mmd(phydev, self.devad.0.into(), self.regnum.into(), val)
+        })
+    }
+}
diff --git a/rust/uapi/uapi_helper.h b/rust/uapi/uapi_helper.h
index 08f5e9334c9e..76d3f103e764 100644
--- a/rust/uapi/uapi_helper.h
+++ b/rust/uapi/uapi_helper.h
@@ -7,5 +7,6 @@
  */
 
 #include <uapi/asm-generic/ioctl.h>
+#include <uapi/linux/mdio.h>
 #include <uapi/linux/mii.h>
 #include <uapi/linux/ethtool.h>
-- 
2.34.1

[PATCH net-next v8 5/6] rust: net::phy unified genphy_read_status function for C22 and C45 registers

[FUJITA Tomonori]

Add unified genphy_read_status function for C22 and C45
registers. Instead of having genphy_c22 and genphy_c45 methods, this
unifies genphy_read_status functions for C22 and C45.

Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/net/phy.rs     | 12 ++----------
 rust/kernel/net/phy/reg.rs | 28 ++++++++++++++++++++++++++++
 2 files changed, 30 insertions(+), 10 deletions(-)

diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index 45866db14c76..1d47884aa3cf 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -252,16 +252,8 @@ pub fn genphy_suspend(&mut self) -> Result {
     }
 
     /// Checks the link status and updates current link state.
-    pub fn genphy_read_status(&mut self) -> Result<u16> {
-        let phydev = self.0.get();
-        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
-        // So it's just an FFI call.
-        let ret = unsafe { bindings::genphy_read_status(phydev) };
-        if ret < 0 {
-            Err(Error::from_errno(ret))
-        } else {
-            Ok(ret as u16)
-        }
+    pub fn genphy_read_status<R: reg::Register>(&mut self) -> Result<u16> {
+        R::read_status(self)
     }
 
     /// Updates the link status.
diff --git a/rust/kernel/net/phy/reg.rs b/rust/kernel/net/phy/reg.rs
index 4563737a9675..a7db0064cb7d 100644
--- a/rust/kernel/net/phy/reg.rs
+++ b/rust/kernel/net/phy/reg.rs
@@ -31,6 +31,13 @@ pub trait Sealed {}
 ///     dev.read(C22::BMCR);
 ///     // read C45 PMA/PMD control 1 register
 ///     dev.read(C45::new(Mmd::PMAPMD, 0));
+///
+///     // Checks the link status as reported by registers in the C22 namespace
+///     // and updates current link state.
+///     dev.genphy_read_status::<phy::C22>();
+///     // Checks the link status as reported by registers in the C45 namespace
+///     // and updates current link state.
+///     dev.genphy_read_status::<phy::C45>();
 /// }
 /// ```
 pub trait Register: private::Sealed {
@@ -39,6 +46,9 @@ pub trait Register: private::Sealed {
 
     /// Writes a PHY register.
     fn write(&self, dev: &mut Device, val: u16) -> Result;
+
+    /// Checks the link status and updates current link state.
+    fn read_status(dev: &mut Device) -> Result<u16>;
 }
 
 /// A single MDIO clause 22 register address (5 bits).
@@ -113,6 +123,15 @@ fn write(&self, dev: &mut Device, val: u16) -> Result {
             bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into(), val)
         })
     }
+
+    fn read_status(dev: &mut Device) -> Result<u16> {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
+        // So it's just an FFI call.
+        let ret = unsafe { bindings::genphy_read_status(phydev) };
+        to_result(ret)?;
+        Ok(ret as u16)
+    }
 }
 
 /// A single MDIO clause 45 register device and address.
@@ -193,4 +212,13 @@ fn write(&self, dev: &mut Device, val: u16) -> Result {
             bindings::phy_write_mmd(phydev, self.devad.0.into(), self.regnum.into(), val)
         })
     }
+
+    fn read_status(dev: &mut Device) -> Result<u16> {
+        let phydev = dev.0.get();
+        // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
+        // So it's just an FFI call.
+        let ret = unsafe { bindings::genphy_c45_read_status(phydev) };
+        to_result(ret)?;
+        Ok(ret as u16)
+    }
 }
-- 
2.34.1

[PATCH net-next v8 6/6] net: phy: add Applied Micro QT2025 PHY driver

[FUJITA Tomonori]

This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.

The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.

This has been tested with Edimax EN-9320SFP+ 10G network adapter.

Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 MAINTAINERS               |   8 +++
 drivers/net/phy/Kconfig   |   7 +++
 drivers/net/phy/Makefile  |   1 +
 drivers/net/phy/qt2025.rs | 103 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 119 insertions(+)
 create mode 100644 drivers/net/phy/qt2025.rs

diff --git a/MAINTAINERS b/MAINTAINERS
index ec395140668e..2e04958183db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1609,6 +1609,14 @@ F:	Documentation/admin-guide/perf/xgene-pmu.rst
 F:	Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
 F:	drivers/perf/xgene_pmu.c
 
+APPLIED MICRO QT2025 PHY DRIVER
+M:	FUJITA Tomonori <fujita.tomonori@gmail.com>
+R:	Trevor Gross <tmgross@umich.edu>
+L:	netdev@vger.kernel.org
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	drivers/net/phy/qt2025.rs
+
 APTINA CAMERA SENSOR PLL
 M:	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f530fcd092fe..01b235b3bb7e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -112,6 +112,13 @@ config ADIN1100_PHY
 	  Currently supports the:
 	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
 
+config AMCC_QT2025_PHY
+	tristate "AMCC QT2025 PHY"
+	depends on RUST_PHYLIB_ABSTRACTIONS
+	depends on RUST_FW_LOADER_ABSTRACTIONS
+	help
+	  Adds support for the Applied Micro Circuits Corporation QT2025 PHY.
+
 source "drivers/net/phy/aquantia/Kconfig"
 
 config AX88796B_PHY
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 33adb3df5f64..90f886844381 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
 obj-$(CONFIG_AIR_EN8811H_PHY)   += air_en8811h.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
+obj-$(CONFIG_AMCC_QT2025_PHY)	+= qt2025.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
 ifdef CONFIG_AX88796B_RUST_PHY
   obj-$(CONFIG_AX88796B_PHY)	+= ax88796b_rust.o
diff --git a/drivers/net/phy/qt2025.rs b/drivers/net/phy/qt2025.rs
new file mode 100644
index 000000000000..28d8981f410b
--- /dev/null
+++ b/drivers/net/phy/qt2025.rs
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) Tehuti Networks Ltd.
+// Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@gmail.com>
+
+//! Applied Micro Circuits Corporation QT2025 PHY driver
+//!
+//! This driver is based on the vendor driver `QT2025_phy.c`. This source
+//! and firmware can be downloaded on the EN-9320SFP+ support site.
+//!
+//! The QT2025 PHY integrates an Intel 8051 micro-controller.
+
+use kernel::c_str;
+use kernel::error::code;
+use kernel::firmware::Firmware;
+use kernel::net::phy::{
+    self,
+    reg::{Mmd, C45},
+    DeviceId, Driver,
+};
+use kernel::prelude::*;
+use kernel::sizes::{SZ_16K, SZ_8K};
+
+kernel::module_phy_driver! {
+    drivers: [PhyQT2025],
+    device_table: [
+        DeviceId::new_with_driver::<PhyQT2025>(),
+    ],
+    name: "qt2025_phy",
+    author: "FUJITA Tomonori <fujita.tomonori@gmail.com>",
+    description: "AMCC QT2025 PHY driver",
+    license: "GPL",
+    firmware: ["qt2025-2.0.3.3.fw"],
+}
+
+struct PhyQT2025;
+
+#[vtable]
+impl Driver for PhyQT2025 {
+    const NAME: &'static CStr = c_str!("QT2025 10Gpbs SFP+");
+    const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x0043a400);
+
+    fn probe(dev: &mut phy::Device) -> Result<()> {
+        // Check the hardware revision code.
+        // Only 0x3b works with this driver and firmware.
+        let hw_rev = dev.read(C45::new(Mmd::PMAPMD, 0xd001))?;
+        if (hw_rev >> 8) != 0xb3 {
+            return Err(code::ENODEV);
+        }
+
+        // `MICRO_RESETN`: hold the micro-controller in reset while configuring.
+        dev.write(C45::new(Mmd::PMAPMD, 0xc300), 0x0000)?;
+        // `SREFCLK_FREQ`: configure clock frequency of the micro-controller.
+        dev.write(C45::new(Mmd::PMAPMD, 0xc302), 0x0004)?;
+        // Non loopback mode.
+        dev.write(C45::new(Mmd::PMAPMD, 0xc319), 0x0038)?;
+        // `CUS_LAN_WAN_CONFIG`: select between LAN and WAN (WIS) mode.
+        dev.write(C45::new(Mmd::PMAPMD, 0xc31a), 0x0098)?;
+        // The following writes use standardized registers (3.38 through
+        // 3.41 5/10/25GBASE-R PCS test pattern seed B) for something else.
+        // We don't know what.
+        dev.write(C45::new(Mmd::PCS, 0x0026), 0x0e00)?;
+        dev.write(C45::new(Mmd::PCS, 0x0027), 0x0893)?;
+        dev.write(C45::new(Mmd::PCS, 0x0028), 0xa528)?;
+        dev.write(C45::new(Mmd::PCS, 0x0029), 0x0003)?;
+        // Configure transmit and recovered clock.
+        dev.write(C45::new(Mmd::PMAPMD, 0xa30a), 0x06e1)?;
+        // `MICRO_RESETN`: release the micro-controller from the reset state.
+        dev.write(C45::new(Mmd::PMAPMD, 0xc300), 0x0002)?;
+        // The micro-controller will start running from the boot ROM.
+        dev.write(C45::new(Mmd::PCS, 0xe854), 0x00c0)?;
+
+        let fw = Firmware::request(c_str!("qt2025-2.0.3.3.fw"), dev.as_ref())?;
+        if fw.data().len() > SZ_16K + SZ_8K {
+            return Err(code::EFBIG);
+        }
+
+        // The 24kB of program memory space is accessible by MDIO.
+        // The first 16kB of memory is located in the address range 3.8000h - 3.BFFFh.
+        // The next 8kB of memory is located at 4.8000h - 4.9FFFh.
+        let mut dst_offset = 0;
+        let mut dst_mmd = Mmd::PCS;
+        for (src_idx, val) in fw.data().iter().enumerate() {
+            if src_idx == SZ_16K {
+                // Start writing to the next register with no offset
+                dst_offset = 0;
+                dst_mmd = Mmd::PHYXS;
+            }
+
+            dev.write(C45::new(dst_mmd, 0x8000 + dst_offset), (*val).into())?;
+
+            dst_offset += 1;
+        }
+        // The micro-controller will start running from SRAM.
+        dev.write(C45::new(Mmd::PCS, 0xe854), 0x0040)?;
+
+        // TODO: sleep here until the hw becomes ready.
+        Ok(())
+    }
+
+    fn read_status(dev: &mut phy::Device) -> Result<u16> {
+        dev.genphy_read_status::<C45>()
+    }
+}
-- 
2.34.1

Re: [PATCH net-next v8 0/6] net: phy: add Applied Micro QT2025 PHY driver

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 28 Aug 2024 07:35:10 +0000 you wrote:
> This patchset adds a PHY driver for Applied Micro Circuits Corporation
> QT2025.
> 
> The first patch adds Rust equivalent to include/linux/sizes.h, makes
> code more readable. The 2-5th patches update the PHYLIB Rust bindings.
> The 4th and 5th patches have been reviewed previously in a different
> thread [1].
> 
> [...]

Here is the summary with links:
  - [net-next,v8,1/6] rust: sizes: add commonly used constants
    https://git.kernel.org/netdev/net-next/c/4d080a029db1
  - [net-next,v8,2/6] rust: net::phy support probe callback
    https://git.kernel.org/netdev/net-next/c/ffd2747de6ab
  - [net-next,v8,3/6] rust: net::phy implement AsRef<kernel::device::Device> trait
    https://git.kernel.org/netdev/net-next/c/7909892a9fbb
  - [net-next,v8,4/6] rust: net::phy unified read/write API for C22 and C45 registers
    https://git.kernel.org/netdev/net-next/c/b2e47002b235
  - [net-next,v8,5/6] rust: net::phy unified genphy_read_status function for C22 and C45 registers
    https://git.kernel.org/netdev/net-next/c/5114e05a3cfa
  - [net-next,v8,6/6] net: phy: add Applied Micro QT2025 PHY driver
    https://git.kernel.org/netdev/net-next/c/fd3eaad826da

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html