From: Danilo Krummrich <dakr@kernel.org>
To: gregkh@linuxfoundation.org, rafael@kernel.org,
bhelgaas@google.com, ojeda@kernel.org, alex.gaynor@gmail.com,
boqun.feng@gmail.com, gary@garyguo.net, bjorn3_gh@protonmail.com,
benno.lossin@proton.me, tmgross@umich.edu,
a.hindborg@samsung.com, aliceryhl@google.com, airlied@gmail.com,
fujita.tomonori@gmail.com, lina@asahilina.net,
pstanner@redhat.com, ajanulgu@redhat.com, lyude@redhat.com,
robh@kernel.org, daniel.almeida@collabora.com,
saravanak@google.com
Cc: rust-for-linux@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
Danilo Krummrich <dakr@kernel.org>
Subject: [PATCH v3 09/16] rust: add `io::Io` base type
Date: Tue, 22 Oct 2024 23:31:46 +0200 [thread overview]
Message-ID: <20241022213221.2383-10-dakr@kernel.org> (raw)
In-Reply-To: <20241022213221.2383-1-dakr@kernel.org>
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`Io` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`Io` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems should embedd the corresponding I/O memory type
(e.g. pci::Bar) into a `Devres` container, such that it gets revoked
once the device is unbound.
Co-developed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
---
rust/helpers/helpers.c | 1 +
rust/helpers/io.c | 91 ++++++++++++++++
rust/kernel/io.rs | 234 +++++++++++++++++++++++++++++++++++++++++
rust/kernel/lib.rs | 1 +
4 files changed, 327 insertions(+)
create mode 100644 rust/helpers/io.c
create mode 100644 rust/kernel/io.rs
diff --git a/rust/helpers/helpers.c b/rust/helpers/helpers.c
index 0720debccdd4..e2f6b2197061 100644
--- a/rust/helpers/helpers.c
+++ b/rust/helpers/helpers.c
@@ -12,6 +12,7 @@
#include "build_assert.c"
#include "build_bug.c"
#include "err.c"
+#include "io.c"
#include "kunit.c"
#include "mutex.c"
#include "page.c"
diff --git a/rust/helpers/io.c b/rust/helpers/io.c
new file mode 100644
index 000000000000..f9bb1bbf1fd5
--- /dev/null
+++ b/rust/helpers/io.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/io.h>
+
+u8 rust_helper_readb(const volatile void __iomem *addr)
+{
+ return readb(addr);
+}
+
+u16 rust_helper_readw(const volatile void __iomem *addr)
+{
+ return readw(addr);
+}
+
+u32 rust_helper_readl(const volatile void __iomem *addr)
+{
+ return readl(addr);
+}
+
+#ifdef CONFIG_64BIT
+u64 rust_helper_readq(const volatile void __iomem *addr)
+{
+ return readq(addr);
+}
+#endif
+
+void rust_helper_writeb(u8 value, volatile void __iomem *addr)
+{
+ writeb(value, addr);
+}
+
+void rust_helper_writew(u16 value, volatile void __iomem *addr)
+{
+ writew(value, addr);
+}
+
+void rust_helper_writel(u32 value, volatile void __iomem *addr)
+{
+ writel(value, addr);
+}
+
+#ifdef CONFIG_64BIT
+void rust_helper_writeq(u64 value, volatile void __iomem *addr)
+{
+ writeq(value, addr);
+}
+#endif
+
+u8 rust_helper_readb_relaxed(const volatile void __iomem *addr)
+{
+ return readb_relaxed(addr);
+}
+
+u16 rust_helper_readw_relaxed(const volatile void __iomem *addr)
+{
+ return readw_relaxed(addr);
+}
+
+u32 rust_helper_readl_relaxed(const volatile void __iomem *addr)
+{
+ return readl_relaxed(addr);
+}
+
+#ifdef CONFIG_64BIT
+u64 rust_helper_readq_relaxed(const volatile void __iomem *addr)
+{
+ return readq_relaxed(addr);
+}
+#endif
+
+void rust_helper_writeb_relaxed(u8 value, volatile void __iomem *addr)
+{
+ writeb_relaxed(value, addr);
+}
+
+void rust_helper_writew_relaxed(u16 value, volatile void __iomem *addr)
+{
+ writew_relaxed(value, addr);
+}
+
+void rust_helper_writel_relaxed(u32 value, volatile void __iomem *addr)
+{
+ writel_relaxed(value, addr);
+}
+
+#ifdef CONFIG_64BIT
+void rust_helper_writeq_relaxed(u64 value, volatile void __iomem *addr)
+{
+ writeq_relaxed(value, addr);
+}
+#endif
diff --git a/rust/kernel/io.rs b/rust/kernel/io.rs
new file mode 100644
index 000000000000..750af938f83e
--- /dev/null
+++ b/rust/kernel/io.rs
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Memory-mapped IO.
+//!
+//! C header: [`include/asm-generic/io.h`](srctree/include/asm-generic/io.h)
+
+use crate::error::{code::EINVAL, Result};
+use crate::{bindings, build_assert};
+
+/// IO-mapped memory, starting at the base address @addr and spanning @maxlen bytes.
+///
+/// The creator (usually a subsystem / bus such as PCI) is responsible for creating the
+/// mapping, performing an additional region request etc.
+///
+/// # Invariant
+///
+/// `addr` is the start and `maxsize` the length of valid I/O mapped memory region of size
+/// `maxsize`.
+///
+/// # Examples
+///
+/// ```no_run
+/// # use kernel::{bindings, io::Io};
+/// # use core::ops::Deref;
+///
+/// // See also [`pci::Bar`] for a real example.
+/// struct IoMem<const SIZE: usize>(Io<SIZE>);
+///
+/// impl<const SIZE: usize> IoMem<SIZE> {
+/// /// # Safety
+/// ///
+/// /// [`paddr`, `paddr` + `SIZE`) must be a valid MMIO region that is mappable into the CPUs
+/// /// virtual address space.
+/// unsafe fn new(paddr: usize) -> Result<Self>{
+///
+/// // SAFETY: By the safety requirements of this function [`paddr`, `paddr` + `SIZE`) is
+/// // valid for `ioremap`.
+/// let addr = unsafe { bindings::ioremap(paddr as _, SIZE.try_into().unwrap()) };
+/// if addr.is_null() {
+/// return Err(ENOMEM);
+/// }
+///
+/// // SAFETY: `addr` is guaranteed to be the start of a valid I/O mapped memory region of
+/// // size `SIZE`.
+/// let io = unsafe { Io::new(addr as _, SIZE)? };
+///
+/// Ok(IoMem(io))
+/// }
+/// }
+///
+/// impl<const SIZE: usize> Drop for IoMem<SIZE> {
+/// fn drop(&mut self) {
+/// // SAFETY: Safe as by the invariant of `Io`.
+/// unsafe { bindings::iounmap(self.0.base_addr() as _); };
+/// }
+/// }
+///
+/// impl<const SIZE: usize> Deref for IoMem<SIZE> {
+/// type Target = Io<SIZE>;
+///
+/// fn deref(&self) -> &Self::Target {
+/// &self.0
+/// }
+/// }
+///
+///# fn no_run() -> Result<(), Error> {
+/// // SAFETY: Invalid usage for example purposes.
+/// let iomem = unsafe { IoMem::<{ core::mem::size_of::<u32>() }>::new(0xBAAAAAAD)? };
+/// iomem.writel(0x42, 0x0);
+/// assert!(iomem.try_writel(0x42, 0x0).is_ok());
+/// assert!(iomem.try_writel(0x42, 0x4).is_err());
+/// # Ok(())
+/// # }
+/// ```
+pub struct Io<const SIZE: usize = 0> {
+ addr: usize,
+ maxsize: usize,
+}
+
+macro_rules! define_read {
+ ($(#[$attr:meta])* $name:ident, $try_name:ident, $type_name:ty) => {
+ /// Read IO data from a given offset known at compile time.
+ ///
+ /// Bound checks are performed on compile time, hence if the offset is not known at compile
+ /// time, the build will fail.
+ $(#[$attr])*
+ #[inline]
+ pub fn $name(&self, offset: usize) -> $type_name {
+ let addr = self.io_addr_assert::<$type_name>(offset);
+
+ // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+ unsafe { bindings::$name(addr as _) }
+ }
+
+ /// Read IO data from a given offset.
+ ///
+ /// Bound checks are performed on runtime, it fails if the offset (plus the type size) is
+ /// out of bounds.
+ $(#[$attr])*
+ pub fn $try_name(&self, offset: usize) -> Result<$type_name> {
+ let addr = self.io_addr::<$type_name>(offset)?;
+
+ // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+ Ok(unsafe { bindings::$name(addr as _) })
+ }
+ };
+}
+
+macro_rules! define_write {
+ ($(#[$attr:meta])* $name:ident, $try_name:ident, $type_name:ty) => {
+ /// Write IO data from a given offset known at compile time.
+ ///
+ /// Bound checks are performed on compile time, hence if the offset is not known at compile
+ /// time, the build will fail.
+ $(#[$attr])*
+ #[inline]
+ pub fn $name(&self, value: $type_name, offset: usize) {
+ let addr = self.io_addr_assert::<$type_name>(offset);
+
+ // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+ unsafe { bindings::$name(value, addr as _, ) }
+ }
+
+ /// Write IO data from a given offset.
+ ///
+ /// Bound checks are performed on runtime, it fails if the offset (plus the type size) is
+ /// out of bounds.
+ $(#[$attr])*
+ pub fn $try_name(&self, value: $type_name, offset: usize) -> Result {
+ let addr = self.io_addr::<$type_name>(offset)?;
+
+ // SAFETY: By the type invariant `addr` is a valid address for MMIO operations.
+ unsafe { bindings::$name(value, addr as _) }
+ Ok(())
+ }
+ };
+}
+
+impl<const SIZE: usize> Io<SIZE> {
+ ///
+ ///
+ /// # Safety
+ ///
+ /// Callers must ensure that `addr` is the start of a valid I/O mapped memory region of size
+ /// `maxsize`.
+ pub unsafe fn new(addr: usize, maxsize: usize) -> Result<Self> {
+ if maxsize < SIZE {
+ return Err(EINVAL);
+ }
+
+ // INVARIANT: Covered by the safety requirements of this function.
+ Ok(Self { addr, maxsize })
+ }
+
+ /// Returns the base address of this mapping.
+ #[inline]
+ pub fn base_addr(&self) -> usize {
+ self.addr
+ }
+
+ /// Returns the size of this mapping.
+ #[inline]
+ pub fn maxsize(&self) -> usize {
+ self.maxsize
+ }
+
+ #[inline]
+ const fn offset_valid<U>(offset: usize, size: usize) -> bool {
+ let type_size = core::mem::size_of::<U>();
+ if let Some(end) = offset.checked_add(type_size) {
+ end <= size && offset % type_size == 0
+ } else {
+ false
+ }
+ }
+
+ #[inline]
+ fn io_addr<U>(&self, offset: usize) -> Result<usize> {
+ if !Self::offset_valid::<U>(offset, self.maxsize()) {
+ return Err(EINVAL);
+ }
+
+ // Probably no need to check, since the safety requirements of `Self::new` guarantee that
+ // this can't overflow.
+ self.base_addr().checked_add(offset).ok_or(EINVAL)
+ }
+
+ #[inline]
+ fn io_addr_assert<U>(&self, offset: usize) -> usize {
+ build_assert!(Self::offset_valid::<U>(offset, SIZE));
+
+ self.base_addr() + offset
+ }
+
+ define_read!(readb, try_readb, u8);
+ define_read!(readw, try_readw, u16);
+ define_read!(readl, try_readl, u32);
+ define_read!(
+ #[cfg(CONFIG_64BIT)]
+ readq,
+ try_readq,
+ u64
+ );
+
+ define_read!(readb_relaxed, try_readb_relaxed, u8);
+ define_read!(readw_relaxed, try_readw_relaxed, u16);
+ define_read!(readl_relaxed, try_readl_relaxed, u32);
+ define_read!(
+ #[cfg(CONFIG_64BIT)]
+ readq_relaxed,
+ try_readq_relaxed,
+ u64
+ );
+
+ define_write!(writeb, try_writeb, u8);
+ define_write!(writew, try_writew, u16);
+ define_write!(writel, try_writel, u32);
+ define_write!(
+ #[cfg(CONFIG_64BIT)]
+ writeq,
+ try_writeq,
+ u64
+ );
+
+ define_write!(writeb_relaxed, try_writeb_relaxed, u8);
+ define_write!(writew_relaxed, try_writew_relaxed, u16);
+ define_write!(writel_relaxed, try_writel_relaxed, u32);
+ define_write!(
+ #[cfg(CONFIG_64BIT)]
+ writeq_relaxed,
+ try_writeq_relaxed,
+ u64
+ );
+}
diff --git a/rust/kernel/lib.rs b/rust/kernel/lib.rs
index b603b67dcd71..fa3b7514e6ae 100644
--- a/rust/kernel/lib.rs
+++ b/rust/kernel/lib.rs
@@ -70,6 +70,7 @@
#[doc(hidden)]
pub use bindings;
+pub mod io;
pub use macros;
pub use uapi;
--
2.46.2
next prev parent reply other threads:[~2024-10-22 21:33 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-22 21:31 [PATCH v3 00/16] Device / Driver PCI / Platform Rust abstractions Danilo Krummrich
2024-10-22 21:31 ` [PATCH v3 01/16] rust: init: introduce `Opaque::try_ffi_init` Danilo Krummrich
2024-10-29 12:42 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 02/16] rust: introduce `InPlaceModule` Danilo Krummrich
2024-10-29 12:45 ` Alice Ryhl
2024-11-04 0:15 ` Greg KH
2024-11-04 17:36 ` Miguel Ojeda
2024-10-22 21:31 ` [PATCH v3 03/16] rust: pass module name to `Module::init` Danilo Krummrich
2024-10-29 12:55 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 04/16] rust: implement generic driver registration Danilo Krummrich
2024-10-22 21:31 ` [PATCH v3 05/16] rust: implement `IdArray`, `IdTable` and `RawDeviceId` Danilo Krummrich
2024-11-25 13:42 ` Miguel Ojeda
2024-10-22 21:31 ` [PATCH v3 06/16] rust: add rcu abstraction Danilo Krummrich
2024-10-29 13:59 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 07/16] rust: add `Revocable` type Danilo Krummrich
2024-10-29 13:26 ` Alice Ryhl
2024-12-03 9:21 ` Danilo Krummrich
2024-12-03 9:24 ` Alice Ryhl
2024-12-03 9:35 ` Danilo Krummrich
2024-12-03 10:58 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 08/16] rust: add `dev_*` print macros Danilo Krummrich
2024-11-04 0:24 ` Greg KH
2024-10-22 21:31 ` Danilo Krummrich [this message]
2024-10-28 15:43 ` [PATCH v3 09/16] rust: add `io::Io` base type Alice Ryhl
2024-10-29 9:20 ` Danilo Krummrich
2024-10-29 10:18 ` Alice Ryhl
2024-11-06 23:44 ` Daniel Almeida
2024-11-06 23:31 ` Daniel Almeida
2024-10-22 21:31 ` [PATCH v3 10/16] rust: add devres abstraction Danilo Krummrich
2024-10-31 14:03 ` Alice Ryhl
2024-11-27 12:21 ` Alice Ryhl
2024-11-27 13:19 ` Danilo Krummrich
2024-11-27 13:20 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions Danilo Krummrich
2024-10-27 22:42 ` Boqun Feng
2024-10-28 10:21 ` Danilo Krummrich
2024-11-26 14:06 ` Danilo Krummrich
2024-10-29 21:16 ` Christian Schrefl
2024-10-22 21:31 ` [PATCH v3 12/16] rust: pci: implement I/O mappable `pci::Bar` Danilo Krummrich
2024-10-22 21:31 ` [PATCH v3 13/16] samples: rust: add Rust PCI sample driver Danilo Krummrich
2024-10-23 15:57 ` Rob Herring
2024-10-28 13:22 ` Danilo Krummrich
2024-10-22 21:31 ` [PATCH v3 14/16] rust: of: add `of::DeviceId` abstraction Danilo Krummrich
2024-10-22 23:03 ` Rob Herring
2024-10-23 6:33 ` Danilo Krummrich
2024-10-27 4:38 ` Fabien Parent
2024-10-29 13:37 ` Alice Ryhl
2024-10-22 21:31 ` [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions Danilo Krummrich
2024-10-22 23:47 ` Rob Herring
2024-10-23 6:44 ` Danilo Krummrich
2024-10-23 14:23 ` Rob Herring
2024-10-28 10:15 ` Danilo Krummrich
2024-10-30 12:23 ` Rob Herring
2024-11-26 12:39 ` Danilo Krummrich
2024-11-26 14:44 ` Rob Herring
2024-11-26 15:17 ` Danilo Krummrich
2024-11-26 19:15 ` Rob Herring
2024-11-26 20:01 ` Danilo Krummrich
2024-10-24 9:11 ` Dirk Behme
2024-10-28 10:19 ` Danilo Krummrich
2024-10-29 7:20 ` Dirk Behme
2024-10-29 8:50 ` Danilo Krummrich
2024-10-29 9:19 ` Dirk Behme
2024-10-29 9:50 ` Danilo Krummrich
2024-10-29 9:55 ` Danilo Krummrich
2024-10-29 10:08 ` Dirk Behme
2024-10-30 13:18 ` Rob Herring
2024-10-27 4:32 ` Fabien Parent
2024-10-28 13:44 ` Dirk Behme
2024-10-29 13:16 ` Alice Ryhl
2024-10-30 15:50 ` Alice Ryhl
2024-10-30 18:07 ` Danilo Krummrich
2024-10-31 8:23 ` Alice Ryhl
2024-11-26 14:13 ` Danilo Krummrich
2024-12-04 19:25 ` Daniel Almeida
2024-12-04 19:30 ` Danilo Krummrich
2024-10-22 21:31 ` [PATCH v3 16/16] samples: rust: add Rust platform sample driver Danilo Krummrich
2024-10-23 0:04 ` Rob Herring
2024-10-23 6:59 ` Danilo Krummrich
2024-10-23 15:37 ` Rob Herring
2024-10-28 9:32 ` Danilo Krummrich
2024-10-25 10:32 ` Dirk Behme
2024-10-25 16:08 ` Rob Herring
2024-10-23 5:13 ` [PATCH v3 00/16] Device / Driver PCI / Platform Rust abstractions Greg KH
2024-10-23 7:28 ` Danilo Krummrich
2024-10-25 5:15 ` Dirk Behme
2024-11-16 14:32 ` Janne Grunau
2024-11-16 14:50 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241022213221.2383-10-dakr@kernel.org \
--to=dakr@kernel.org \
--cc=a.hindborg@samsung.com \
--cc=airlied@gmail.com \
--cc=ajanulgu@redhat.com \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=benno.lossin@proton.me \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=daniel.almeida@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=fujita.tomonori@gmail.com \
--cc=gary@garyguo.net \
--cc=gregkh@linuxfoundation.org \
--cc=lina@asahilina.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lyude@redhat.com \
--cc=ojeda@kernel.org \
--cc=pstanner@redhat.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=saravanak@google.com \
--cc=tmgross@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).