From: Andreas Hindborg <a.hindborg@kernel.org>
To: "Boqun Feng" <boqun.feng@gmail.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Alex Gaynor" <alex.gaynor@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
"Danilo Krummrich" <dakr@kernel.org>,
"Jens Axboe" <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, rust-for-linux@vger.kernel.org,
linux-kernel@vger.kernel.org,
Andreas Hindborg <a.hindborg@kernel.org>
Subject: [PATCH 9/9] rnull: add soft-irq completion support
Date: Mon, 16 Jun 2025 15:23:59 +0200 [thread overview]
Message-ID: <20250616-rnull-up-v6-16-v1-9-a4168b8e76b2@kernel.org> (raw)
In-Reply-To: <20250616-rnull-up-v6-16-v1-0-a4168b8e76b2@kernel.org>
rnull currently only supports direct completion. Add option for completing
requests across CPU nodes via soft IRQ or IPMI.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
---
drivers/block/rnull/configfs.rs | 61 +++++++++++++++++++++++++++++++++++++++--
drivers/block/rnull/rnull.rs | 32 +++++++++++++--------
2 files changed, 80 insertions(+), 13 deletions(-)
diff --git a/drivers/block/rnull/configfs.rs b/drivers/block/rnull/configfs.rs
index 315e04fbf14f..22a7ec26cb36 100644
--- a/drivers/block/rnull/configfs.rs
+++ b/drivers/block/rnull/configfs.rs
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
use super::{NullBlkDevice, THIS_MODULE};
-use core::fmt::Write;
+use core::fmt::{Display, Write};
use kernel::{
block::mq::gen_disk::{GenDisk, GenDiskBuilder},
c_str,
@@ -36,7 +36,7 @@ impl AttributeOperations<0> for Config {
fn show(_this: &Config, page: &mut [u8; PAGE_SIZE]) -> Result<usize> {
let mut writer = kernel::str::BufferWriter::new(page)?;
- writer.write_str("blocksize,size,rotational\n")?;
+ writer.write_str("blocksize,size,rotational,irqmode\n")?;
Ok(writer.pos())
}
}
@@ -58,6 +58,7 @@ fn make_group(
blocksize: 1,
rotational: 2,
size: 3,
+ irqmode: 4,
],
};
@@ -72,6 +73,7 @@ fn make_group(
rotational: false,
disk: None,
capacity_mib: 4096,
+ irq_mode: IRQMode::None,
name: name.try_into()?,
}),
}),
@@ -79,6 +81,34 @@ fn make_group(
}
}
+#[derive(Debug, Clone, Copy)]
+pub(crate) enum IRQMode {
+ None,
+ Soft,
+}
+
+impl TryFrom<u8> for IRQMode {
+ type Error = kernel::error::Error;
+
+ fn try_from(value: u8) -> Result<Self> {
+ match value {
+ 0 => Ok(Self::None),
+ 1 => Ok(Self::Soft),
+ _ => Err(kernel::error::code::EINVAL),
+ }
+ }
+}
+
+impl Display for IRQMode {
+ fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
+ match self {
+ Self::None => f.write_str("0")?,
+ Self::Soft => f.write_str("1")?,
+ }
+ Ok(())
+ }
+}
+
#[pin_data]
pub(crate) struct DeviceConfig {
#[pin]
@@ -92,6 +122,7 @@ struct DeviceConfigInner {
block_size: u32,
rotational: bool,
capacity_mib: u64,
+ irq_mode: IRQMode,
disk: Option<GenDisk<NullBlkDevice>>,
}
@@ -126,6 +157,7 @@ fn store(this: &DeviceConfig, page: &[u8]) -> Result {
guard.block_size,
guard.rotational,
guard.capacity_mib,
+ guard.irq_mode,
)?);
guard.powered = true;
} else if guard.powered && !power_op {
@@ -218,3 +250,28 @@ fn store(this: &DeviceConfig, page: &[u8]) -> Result {
Ok(())
}
}
+
+#[vtable]
+impl configfs::AttributeOperations<4> for DeviceConfig {
+ type Data = DeviceConfig;
+
+ fn show(this: &DeviceConfig, page: &mut [u8; PAGE_SIZE]) -> Result<usize> {
+ let mut writer = kernel::str::BufferWriter::new(page)?;
+ writer.write_fmt(fmt!("{}\n", this.data.lock().irq_mode))?;
+ Ok(writer.pos())
+ }
+
+ fn store(this: &DeviceConfig, page: &[u8]) -> Result {
+ if this.data.lock().powered {
+ return Err(EBUSY);
+ }
+
+ let text = core::str::from_utf8(page)?.trim();
+ let value = text
+ .parse::<u8>()
+ .map_err(|_| kernel::error::code::EINVAL)?;
+
+ this.data.lock().irq_mode = IRQMode::try_from(value)?;
+ Ok(())
+ }
+}
diff --git a/drivers/block/rnull/rnull.rs b/drivers/block/rnull/rnull.rs
index 371786be7f47..85b1509a3106 100644
--- a/drivers/block/rnull/rnull.rs
+++ b/drivers/block/rnull/rnull.rs
@@ -4,6 +4,7 @@
mod configfs;
+use configfs::IRQMode;
use kernel::{
alloc::flags,
block::{
@@ -54,35 +55,44 @@ fn new(
block_size: u32,
rotational: bool,
capacity_mib: u64,
+ irq_mode: IRQMode,
) -> Result<GenDisk<Self>> {
let tagset = Arc::pin_init(TagSet::new(1, 256, 1), flags::GFP_KERNEL)?;
+ let queue_data = Box::new(QueueData { irq_mode }, flags::GFP_KERNEL)?;
+
gen_disk::GenDiskBuilder::new()
.capacity_sectors(capacity_mib << (20 - block::SECTOR_SHIFT))
.logical_block_size(block_size)?
.physical_block_size(block_size)?
.rotational(rotational)
- .build(fmt!("{}", name.to_str()?), tagset, ())
+ .build(fmt!("{}", name.to_str()?), tagset, queue_data)
}
}
+struct QueueData {
+ irq_mode: IRQMode,
+}
+
#[vtable]
impl Operations for NullBlkDevice {
- type QueueData = ();
+ type QueueData = KBox<QueueData>;
#[inline(always)]
- fn queue_rq(_queue_data: (), rq: ARef<mq::Request<Self>>, _is_last: bool) -> Result {
- mq::Request::end_ok(rq)
- .map_err(|_e| kernel::error::code::EIO)
- // We take no refcounts on the request, so we expect to be able to
- // end the request. The request reference must be unique at this
- // point, and so `end_ok` cannot fail.
- .expect("Fatal error - expected to be able to end request");
-
+ fn queue_rq(queue_data: &QueueData, rq: ARef<mq::Request<Self>>, _is_last: bool) -> Result {
+ match queue_data.irq_mode {
+ IRQMode::None => mq::Request::end_ok(rq)
+ .map_err(|_e| kernel::error::code::EIO)
+ // We take no refcounts on the request, so we expect to be able to
+ // end the request. The request reference must be unique at this
+ // point, and so `end_ok` cannot fail.
+ .expect("Fatal error - expected to be able to end request"),
+ IRQMode::Soft => mq::Request::complete(rq),
+ }
Ok(())
}
- fn commit_rqs(_queue_data: ()) {}
+ fn commit_rqs(_queue_data: &QueueData) {}
fn complete(rq: ARef<mq::Request<Self>>) {
mq::Request::end_ok(rq)
--
2.47.2
next prev parent reply other threads:[~2025-06-16 13:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-16 13:23 [PATCH 0/9] rnull: add configfs, remote completion to rnull Andreas Hindborg
2025-06-16 13:23 ` [PATCH 1/9] rust: block: remove trait bound from `mq::Request` definition Andreas Hindborg
2025-06-16 13:23 ` [PATCH 2/9] rust: block: add block related constants Andreas Hindborg
2025-06-16 13:23 ` [PATCH 3/9] rust: block,core: rename `RawWriter` to `BufferWriter` Andreas Hindborg
2025-07-07 14:18 ` Miguel Ojeda
2025-07-07 14:58 ` Andreas Hindborg
2025-07-07 18:25 ` Miguel Ojeda
2025-07-08 8:44 ` Andreas Hindborg
2025-06-16 13:23 ` [PATCH 4/9] rnull: move driver to separate directory Andreas Hindborg
2025-06-16 13:23 ` [PATCH 5/9] rnull: enable configuration via `configfs` Andreas Hindborg
2025-06-16 13:23 ` [PATCH 6/9] rust: block: add `GenDisk` private data support Andreas Hindborg
2025-06-16 13:23 ` [PATCH 7/9] rust: block: mq: fix spelling in a safety comment Andreas Hindborg
2025-06-16 13:23 ` [PATCH 8/9] rust: block: add remote completion to `Request` Andreas Hindborg
2025-06-16 13:23 ` Andreas Hindborg [this message]
2025-06-16 13:56 ` [PATCH 9/9] rnull: add soft-irq completion support Johannes Thumshirn
2025-06-17 8:08 ` Andreas Hindborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250616-rnull-up-v6-16-v1-9-a4168b8e76b2@kernel.org \
--to=a.hindborg@kernel.org \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=axboe@kernel.dk \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=dakr@kernel.org \
--cc=gary@garyguo.net \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=tmgross@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).