From: Timur Tabi <ttabi@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>,
Lyude Paul <lyude@redhat.com>,
Joel Fernandes <joelagnelf@nvidia.com>,
John Hubbard <jhubbard@nvidia.com>,
<nouveau@lists.freedesktop.org>, <rust-for-linux@vger.kernel.org>
Subject: [PATCH v2 06/13] gpu: nova-core: add Turing boot registers
Date: Mon, 1 Dec 2025 17:39:15 -0600 [thread overview]
Message-ID: <20251201233922.27218-7-ttabi@nvidia.com> (raw)
In-Reply-To: <20251201233922.27218-1-ttabi@nvidia.com>
Define some more GPU registers used to boot GSP-RM on Turing and GA100.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
---
drivers/gpu/nova-core/regs.rs | 63 +++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/gpu/nova-core/regs.rs b/drivers/gpu/nova-core/regs.rs
index 88bec1d4830b..2143869d27ba 100644
--- a/drivers/gpu/nova-core/regs.rs
+++ b/drivers/gpu/nova-core/regs.rs
@@ -258,6 +258,11 @@ pub(crate) fn vga_workspace_addr(self) -> Option<u64> {
6:6 swgen0 as bool;
});
+// Interrupt mask clear register. Writing 1 to a bit clears the corresponding interrupt mask.
+register!(NV_PFALCON_FALCON_IRQMCLR @ PFalconBase[0x00000014] {
+ 31:0 value as u32;
+});
+
register!(NV_PFALCON_FALCON_MAILBOX0 @ PFalconBase[0x00000040] {
31:0 value as u32;
});
@@ -266,6 +271,14 @@ pub(crate) fn vga_workspace_addr(self) -> Option<u64> {
31:0 value as u32;
});
+// Interface enable register.
+register!(NV_PFALCON_FALCON_ITFEN @ PFalconBase[0x00000048] {
+ 0:0 ctxen as bool, "Context interface enable";
+ 1:1 mthden as bool, "Method interface enable";
+ 2:2 postwr as bool;
+ 4:4 secwl_cpuctl_alias as bool;
+});
+
// Used to store version information about the firmware running
// on the Falcon processor.
register!(NV_PFALCON_FALCON_OS @ PFalconBase[0x00000080] {
@@ -307,6 +320,13 @@ pub(crate) fn mem_scrubbing_done(self) -> bool {
7:7 secure_stat as bool;
});
+impl NV_PFALCON_FALCON_DMACTL {
+ /// Returns `true` if memory scrubbing is completed.
+ pub(crate) fn mem_scrubbing_done(self) -> bool {
+ !self.dmem_scrubbing() && !self.imem_scrubbing()
+ }
+}
+
register!(NV_PFALCON_FALCON_DMATRFBASE @ PFalconBase[0x00000110] {
31:0 base as u32;
});
@@ -353,6 +373,42 @@ pub(crate) fn with_falcon_mem(self, mem: FalconMem) -> Self {
1:1 startcpu as bool;
});
+// Config memory base address. Specifies the upper address bits that must be matched
+// to access the config aperture. The base may not be zero as that would conflict with DMEM.
+register!(NV_PFALCON2_FALCON_CMEMBASE @ PFalcon2Base[0x00000160] {
+ 31:18 value as u16;
+});
+
+// IMEM access control register. Up to 4 ports are available for IMEM access.
+register!(NV_PFALCON_FALCON_IMEMC @ PFalconBase[0x00000180[4; 16]] {
+ 15:0 offs as u16, "IMEM block and word offset";
+ 24:24 aincw as bool, "Auto-increment on write";
+ 28:28 secure as bool, "Access secure IMEM";
+});
+
+// IMEM data register. Reading/writing this register accesses IMEM at the address
+// specified by the corresponding IMEMC register.
+register!(NV_PFALCON_FALCON_IMEMD @ PFalconBase[0x00000184[4; 16]] {
+ 31:0 data as u32;
+});
+
+// IMEM tag register. Used to set the tag for the current IMEM block.
+register!(NV_PFALCON_FALCON_IMEMT @ PFalconBase[0x00000188[4; 16]] {
+ 15:0 tag as u16;
+});
+
+// DMEM access control register. Up to 8 ports are available for DMEM access.
+register!(NV_PFALCON_FALCON_DMEMC @ PFalconBase[0x000001c0[8; 8]] {
+ 15:0 offs as u16, "DMEM block and word offset";
+ 24:24 aincw as bool, "Auto-increment on write";
+});
+
+// DMEM data register. Reading/writing this register accesses DMEM at the address
+// specified by the corresponding DMEMC register.
+register!(NV_PFALCON_FALCON_DMEMD @ PFalconBase[0x000001c4[8; 8]] {
+ 31:0 data as u32;
+});
+
// Actually known as `NV_PSEC_FALCON_ENGINE` and `NV_PGSP_FALCON_ENGINE` depending on the falcon
// instance.
register!(NV_PFALCON_FALCON_ENGINE @ PFalconBase[0x000003c0] {
@@ -390,6 +446,13 @@ pub(crate) fn with_falcon_mem(self, mem: FalconMem) -> Self {
// PRISCV
+// RISC-V status register for debug (Turing and GA100 only).
+// Reflects current RISC-V core status.
+register!(NV_PRISCV_RISCV_CORE_SWITCH_RISCV_STATUS @ PFalcon2Base[0x00000240] {
+ 0:0 active_stat as bool, "RISC-V core active/inactive status";
+});
+
+// GA102 and later
register!(NV_PRISCV_RISCV_CPUCTL @ PFalcon2Base[0x00000388] {
0:0 halted as bool;
7:7 active_stat as bool;
--
2.52.0
next prev parent reply other threads:[~2025-12-01 23:41 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-01 23:39 [PATCH v2 00/13] gpu: nova-core: add Turing support Timur Tabi
2025-12-01 23:39 ` [PATCH v2 01/13] gpu: nova-core: rename Imem to ImemSecure Timur Tabi
2025-12-01 23:39 ` [PATCH v2 02/13] gpu: nova-core: add ImemNonSecure section infrastructure Timur Tabi
2025-12-01 23:39 ` [PATCH v2 03/13] gpu: nova-core: support header parsing on Turing/GA100 Timur Tabi
2025-12-01 23:39 ` [PATCH v2 04/13] gpu: nova-core: add support for Turing/GA100 fwsignature Timur Tabi
2025-12-01 23:39 ` [PATCH v2 05/13] gpu: nova-core: add NV_PFALCON_FALCON_DMATRFCMD::with_falcon_mem() Timur Tabi
2025-12-01 23:39 ` Timur Tabi [this message]
2025-12-01 23:39 ` [PATCH v2 07/13] gpu: nova-core: move some functions into the HAL Timur Tabi
2025-12-01 23:39 ` [PATCH v2 08/13] gpu: nova-core: Add basic Turing HAL Timur Tabi
2025-12-01 23:39 ` [PATCH v2 09/13] gpu: nova-core: add Falcon HAL method supports_dma() Timur Tabi
2025-12-01 23:39 ` [PATCH v2 10/13] gpu: nova-core: add FalconUCodeDescV2 support Timur Tabi
2025-12-01 23:39 ` [PATCH v2 11/13] gpu: nova-core: align LibosMemoryRegionInitArgument size to page size Timur Tabi
2025-12-01 23:39 ` [PATCH v2 12/13] gpu: nova-core: add PIO support for loading firmware images Timur Tabi
2025-12-02 21:23 ` Joel Fernandes
2025-12-02 22:51 ` Timur Tabi
2025-12-02 23:20 ` Joel Fernandes
2025-12-02 23:40 ` John Hubbard
2025-12-02 23:48 ` Timur Tabi
2025-12-03 0:35 ` John Hubbard
2025-12-03 0:42 ` Timur Tabi
2025-12-03 0:45 ` John Hubbard
2025-12-03 2:14 ` Joel Fernandes
2025-12-03 2:21 ` John Hubbard
2025-12-02 21:28 ` Joel Fernandes
2025-12-01 23:39 ` [PATCH v2 13/13] [RFC] gpu: nova: implement trait object FalconUCodeDescriptor Timur Tabi
2025-12-02 3:00 ` John Hubbard
2025-12-02 2:55 ` [PATCH v2 00/13] gpu: nova-core: add Turing support John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251201233922.27218-7-ttabi@nvidia.com \
--to=ttabi@nvidia.com \
--cc=acourbot@nvidia.com \
--cc=dakr@kernel.org \
--cc=jhubbard@nvidia.com \
--cc=joelagnelf@nvidia.com \
--cc=lyude@redhat.com \
--cc=nouveau@lists.freedesktop.org \
--cc=rust-for-linux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).