[PATCH 2/2] gpu: nova-core: add missing newlines to several print strings

[Timur Tabi <ttabi@nvidia.com>]

Although the dev_xx!() macro calls do not technically require terminating
newlines for the format strings, they should be added any way to maintain
consistency, both within Rust code and with the C versions.

Signed-off-by: Timur Tabi <ttabi@nvidia.com>
---
 drivers/gpu/nova-core/falcon.rs           | 6 +++---
 drivers/gpu/nova-core/falcon/hal/ga102.rs | 4 ++--
 drivers/gpu/nova-core/gpu.rs              | 2 +-
 drivers/gpu/nova-core/gsp/sequencer.rs    | 6 +++---
 drivers/gpu/nova-core/vbios.rs            | 2 +-
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
index fe5abf64dd2b..c1cb31c856b5 100644
--- a/drivers/gpu/nova-core/falcon.rs
+++ b/drivers/gpu/nova-core/falcon.rs
@@ -466,7 +466,7 @@ fn dma_wr<F: FalconFirmware<Target = E>>(
         if dma_start % DmaAddress::from(DMA_LEN) > 0 {
             dev_err!(
                 self.dev,
-                "DMA transfer start addresses must be a multiple of {}",
+                "DMA transfer start addresses must be a multiple of {}\n",
                 DMA_LEN
             );
             return Err(EINVAL);
@@ -483,11 +483,11 @@ fn dma_wr<F: FalconFirmware<Target = E>>(
             .and_then(|size| size.checked_add(load_offsets.src_start))
         {
             None => {
-                dev_err!(self.dev, "DMA transfer length overflow");
+                dev_err!(self.dev, "DMA transfer length overflow\n");
                 return Err(EOVERFLOW);
             }
             Some(upper_bound) if usize::from_safe_cast(upper_bound) > fw.size() => {
-                dev_err!(self.dev, "DMA transfer goes beyond range of DMA object");
+                dev_err!(self.dev, "DMA transfer goes beyond range of DMA object\n");
                 return Err(EINVAL);
             }
             Some(_) => (),
diff --git a/drivers/gpu/nova-core/falcon/hal/ga102.rs b/drivers/gpu/nova-core/falcon/hal/ga102.rs
index 69a7a95cac16..0bdfe45a2d03 100644
--- a/drivers/gpu/nova-core/falcon/hal/ga102.rs
+++ b/drivers/gpu/nova-core/falcon/hal/ga102.rs
@@ -52,7 +52,7 @@ fn signature_reg_fuse_version_ga102(
     let ucode_idx = match usize::from(ucode_id) {
         ucode_id @ 1..=regs::NV_FUSE_OPT_FPF_SIZE => ucode_id - 1,
         _ => {
-            dev_err!(dev, "invalid ucode id {:#x}", ucode_id);
+            dev_err!(dev, "invalid ucode id {:#x}\n", ucode_id);
             return Err(EINVAL);
         }
     };
@@ -66,7 +66,7 @@ fn signature_reg_fuse_version_ga102(
     } else if engine_id_mask & 0x0400 != 0 {
         regs::NV_FUSE_OPT_FPF_GSP_UCODE1_VERSION::read(bar, ucode_idx).data()
     } else {
-        dev_err!(dev, "unexpected engine_id_mask {:#x}", engine_id_mask);
+        dev_err!(dev, "unexpected engine_id_mask {:#x}\n", engine_id_mask);
         return Err(EINVAL);
     };
 
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 50d76092fbdd..9b042ef1a308 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -268,7 +268,7 @@ pub(crate) fn new<'a>(
             // We must wait for GFW_BOOT completion before doing any significant setup on the GPU.
             _: {
                 gfw::wait_gfw_boot_completion(bar)
-                    .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete"))?;
+                    .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete\n"))?;
             },
 
             sysmem_flush: SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?,
diff --git a/drivers/gpu/nova-core/gsp/sequencer.rs b/drivers/gpu/nova-core/gsp/sequencer.rs
index d78a30fbb70f..d965ffe9ba89 100644
--- a/drivers/gpu/nova-core/gsp/sequencer.rs
+++ b/drivers/gpu/nova-core/gsp/sequencer.rs
@@ -121,7 +121,7 @@ pub(crate) fn new(data: &[u8], dev: &device::Device) -> Result<(Self, usize)> {
         };
 
         if data.len() < size {
-            dev_err!(dev, "Data is not enough for command");
+            dev_err!(dev, "Data is not enough for command\n");
             return Err(EINVAL);
         }
 
@@ -320,7 +320,7 @@ fn next(&mut self) -> Option<Self::Item> {
 
         cmd_result.map_or_else(
             |_err| {
-                dev_err!(self.dev, "Error parsing command at offset {}", offset);
+                dev_err!(self.dev, "Error parsing command at offset {}\n", offset);
                 None
             },
             |(cmd, size)| {
@@ -382,7 +382,7 @@ pub(crate) fn run(cmdq: &mut Cmdq, params: GspSequencerParams<'a>) -> Result {
             dev: params.dev,
         };
 
-        dev_dbg!(sequencer.dev, "Running CPU Sequencer commands");
+        dev_dbg!(sequencer.dev, "Running CPU Sequencer commands\n");
 
         for cmd_result in sequencer.iter() {
             match cmd_result {
diff --git a/drivers/gpu/nova-core/vbios.rs b/drivers/gpu/nova-core/vbios.rs
index 7c26e4a2d61c..e4eae9385f47 100644
--- a/drivers/gpu/nova-core/vbios.rs
+++ b/drivers/gpu/nova-core/vbios.rs
@@ -790,7 +790,7 @@ fn falcon_data_ptr(&self) -> Result<u32> {
         // read the 4 bytes at the offset specified in the token
         let offset = usize::from(token.data_offset);
         let bytes: [u8; 4] = self.base.data[offset..offset + 4].try_into().map_err(|_| {
-            dev_err!(self.base.dev, "Failed to convert data slice to array");
+            dev_err!(self.base.dev, "Failed to convert data slice to array\n");
             EINVAL
         })?;
 
-- 
2.52.0