From: John Hubbard <jhubbard@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>
Cc: "Alexandre Courbot" <acourbot@nvidia.com>,
"Joel Fernandes" <joelagnelf@nvidia.com>,
"Timur Tabi" <ttabi@nvidia.com>,
"Alistair Popple" <apopple@nvidia.com>,
"Eliot Courtney" <ecourtney@nvidia.com>,
"Zhi Wang" <zhiw@nvidia.com>, "David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Alex Gaynor" <alex.gaynor@gmail.com>,
"Boqun Feng" <boqun.feng@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
nouveau@lists.freedesktop.org, rust-for-linux@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
"John Hubbard" <jhubbard@nvidia.com>
Subject: [PATCH v2 22/30] gpu: nova-core: Hopper/Blackwell: add FSP send/receive messaging
Date: Fri, 30 Jan 2026 16:55:56 -0800 [thread overview]
Message-ID: <20260131005604.454172-23-jhubbard@nvidia.com> (raw)
In-Reply-To: <20260131005604.454172-1-jhubbard@nvidia.com>
Add send_sync_fsp() which sends an MCTP/NVDM message to FSP and waits
for the response. This handles the low-level protocol details including
header validation, error checking, and timeout handling.
Cc: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/gpu/nova-core/falcon/fsp.rs | 3 -
drivers/gpu/nova-core/fsp.rs | 101 ++++++++++++++++++++++++++++
2 files changed, 101 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/nova-core/falcon/fsp.rs b/drivers/gpu/nova-core/falcon/fsp.rs
index 081b9fce9278..33d0408eb852 100644
--- a/drivers/gpu/nova-core/falcon/fsp.rs
+++ b/drivers/gpu/nova-core/falcon/fsp.rs
@@ -93,7 +93,6 @@ pub(crate) fn read_emem(&self, bar: &Bar0, offset: u32, data: &mut [u8]) -> Resu
///
/// The FSP message queue is not circular - pointers are reset to 0 after each
/// message exchange, so `tail >= head` is always true when data is present.
- #[expect(unused)]
pub(crate) fn poll_msgq(&self, bar: &Bar0) -> u32 {
let head = regs::NV_PFSP_MSGQ_HEAD::read(bar).address();
let tail = regs::NV_PFSP_MSGQ_TAIL::read(bar).address();
@@ -116,7 +115,6 @@ pub(crate) fn poll_msgq(&self, bar: &Bar0) -> u32 {
///
/// # Returns
/// `Ok(())` on success, `Err(EINVAL)` if packet is empty or not 4-byte aligned
- #[expect(unused)]
pub(crate) fn send_msg(&self, bar: &Bar0, packet: &[u8]) -> Result {
if packet.is_empty() {
return Err(EINVAL);
@@ -148,7 +146,6 @@ pub(crate) fn send_msg(&self, bar: &Bar0, packet: &[u8]) -> Result {
///
/// # Returns
/// `Ok(bytes_read)` on success, `Err(EINVAL)` if size is 0, exceeds buffer, or not aligned
- #[expect(unused)]
pub(crate) fn recv_msg(&self, bar: &Bar0, buffer: &mut [u8], size: usize) -> Result<usize> {
if size == 0 || size > buffer.len() {
return Err(EINVAL);
diff --git a/drivers/gpu/nova-core/fsp.rs b/drivers/gpu/nova-core/fsp.rs
index 4f7d121f4240..dfd0ffe5a650 100644
--- a/drivers/gpu/nova-core/fsp.rs
+++ b/drivers/gpu/nova-core/fsp.rs
@@ -22,6 +22,9 @@
use crate::regs::FSP_BOOT_COMPLETE_SUCCESS;
+/// FSP message timeout in milliseconds.
+const FSP_MSG_TIMEOUT_MS: i64 = 2000;
+
/// FSP secure boot completion timeout in milliseconds.
const FSP_SECURE_BOOT_TIMEOUT_MS: i64 = 4000;
@@ -314,4 +317,102 @@ pub(crate) fn extract_fmc_signatures_static(
Ok(signatures)
}
+
+ /// Send message to FSP and wait for response.
+ fn send_sync_fsp(
+ dev: &device::Device<device::Bound>,
+ bar: &crate::driver::Bar0,
+ fsp_falcon: &crate::falcon::Falcon<crate::falcon::fsp::Fsp>,
+ nvdm_type: u32,
+ packet: &[u8],
+ ) -> Result<()> {
+ // Send message
+ fsp_falcon.send_msg(bar, packet)?;
+
+ // Wait for response
+ let timeout = Delta::from_millis(FSP_MSG_TIMEOUT_MS);
+ let packet_size = read_poll_timeout(
+ || Ok(fsp_falcon.poll_msgq(bar)),
+ |&size| size > 0,
+ Delta::ZERO,
+ timeout,
+ )
+ .map_err(|_| {
+ dev_err!(dev, "FSP response timeout\n");
+ ETIMEDOUT
+ })?;
+
+ // Receive response
+ let packet_size = packet_size as usize;
+ let mut response_buf = KVec::<u8>::new();
+ response_buf.resize(packet_size, 0, GFP_KERNEL)?;
+ fsp_falcon.recv_msg(bar, &mut response_buf, packet_size)?;
+
+ // Parse response
+ if response_buf.len() < core::mem::size_of::<FspResponse>() {
+ dev_err!(dev, "FSP response too small: {}\n", response_buf.len());
+ return Err(EIO);
+ }
+
+ let response = FspResponse::from_bytes(&response_buf[..]).ok_or(EIO)?;
+
+ // Copy packed struct fields to avoid alignment issues
+ let mctp_header = response.mctp_header;
+ let nvdm_header = response.nvdm_header;
+ let command_nvdm_type = response.response.command_nvdm_type;
+ let error_code = response.response.error_code;
+
+ // Validate MCTP header
+ let mctp_som = (mctp_header >> 31) & 1;
+ let mctp_eom = (mctp_header >> 30) & 1;
+ if mctp_som != 1 || mctp_eom != 1 {
+ dev_err!(
+ dev,
+ "Unexpected MCTP header in FSP reply: {:#x}\n",
+ mctp_header
+ );
+ return Err(EIO);
+ }
+
+ // Validate NVDM header
+ let nvdm_msg_type = nvdm_header & 0x7f;
+ let nvdm_vendor_id = (nvdm_header >> 8) & 0xffff;
+ let nvdm_type_resp = (nvdm_header >> 24) & 0xff;
+
+ if nvdm_msg_type != mctp::MSG_TYPE_VENDOR_PCI
+ || nvdm_vendor_id != mctp::VENDOR_ID_NV
+ || nvdm_type_resp != mctp::NVDM_TYPE_FSP_RESPONSE
+ {
+ dev_err!(
+ dev,
+ "Unexpected NVDM header in FSP reply: {:#x}\n",
+ nvdm_header
+ );
+ return Err(EIO);
+ }
+
+ // Check command type matches
+ if command_nvdm_type != nvdm_type {
+ dev_err!(
+ dev,
+ "Expected NVDM type {:#x} in reply, got {:#x}\n",
+ nvdm_type,
+ command_nvdm_type
+ );
+ return Err(EIO);
+ }
+
+ // Check for errors
+ if error_code != 0 {
+ dev_err!(
+ dev,
+ "NVDM command {:#x} failed with error {:#x}\n",
+ nvdm_type,
+ error_code
+ );
+ return Err(EIO);
+ }
+
+ Ok(())
+ }
}
--
2.52.0
next prev parent reply other threads:[~2026-01-31 0:56 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-31 0:55 [PATCH v2 00/30] gpu: nova-core: firmware: Hopper/Blackwell support John Hubbard
2026-01-31 0:55 ` [PATCH v2 01/30] gpu: nova-core: print FB sizes, along with ranges John Hubbard
2026-02-02 14:47 ` Gary Guo
2026-01-31 0:55 ` [PATCH v2 02/30] gpu: nova-core: add FbRange.len() and use it in boot.rs John Hubbard
2026-01-31 0:55 ` [PATCH v2 03/30] gpu: nova-core: Hopper/Blackwell: basic GPU identification John Hubbard
2026-01-31 0:55 ` [PATCH v2 04/30] gpu: nova-core: factor .fwsignature* selection into a new get_gsp_sigs_section() John Hubbard
2026-01-31 0:55 ` [PATCH v2 05/30] gpu: nova-core: use GPU Architecture to simplify HAL selections John Hubbard
2026-01-31 0:55 ` [PATCH v2 06/30] gpu: nova-core: apply the one "use" item per line policy to commands.rs John Hubbard
2026-01-31 0:55 ` [PATCH v2 07/30] gpu: nova-core: set DMA mask width based on GPU architecture John Hubbard
2026-01-31 0:55 ` [PATCH v2 08/30] gpu: nova-core: Hopper/Blackwell: skip GFW boot waiting John Hubbard
2026-02-02 14:49 ` Gary Guo
2026-02-02 14:52 ` Danilo Krummrich
2026-02-02 21:37 ` John Hubbard
2026-01-31 0:55 ` [PATCH v2 09/30] gpu: nova-core: move firmware image parsing code to firmware.rs John Hubbard
2026-01-31 0:55 ` [PATCH v2 10/30] gpu: nova-core: factor out a section_name_eq() function John Hubbard
2026-01-31 0:55 ` [PATCH v2 11/30] gpu: nova-core: don't assume 64-bit firmware images John Hubbard
2026-01-31 0:55 ` [PATCH v2 12/30] gpu: nova-core: add support for 32-bit " John Hubbard
2026-01-31 0:55 ` [PATCH v2 13/30] gpu: nova-core: add auto-detection of 32-bit, 64-bit " John Hubbard
2026-01-31 0:55 ` [PATCH v2 14/30] gpu: nova-core: Hopper/Blackwell: add FMC firmware image, in support of FSP John Hubbard
2026-01-31 0:55 ` [PATCH v2 15/30] gpu: nova-core: Hopper/Blackwell: add FSP falcon engine stub John Hubbard
2026-01-31 0:55 ` [PATCH v2 16/30] gpu: nova-core: Hopper/Blackwell: add FSP falcon EMEM operations John Hubbard
2026-01-31 0:55 ` [PATCH v2 17/30] gpu: nova-core: Hopper/Blackwell: add FSP message infrastructure John Hubbard
2026-01-31 0:55 ` [PATCH v2 18/30] gpu: nova-core: Hopper/Blackwell: calculate reserved FB heap size John Hubbard
2026-01-31 0:55 ` [PATCH v2 19/30] gpu: nova-core: Hopper/Blackwell: add FSP secure boot completion waiting John Hubbard
2026-01-31 0:55 ` [PATCH v2 20/30] gpu: nova-core: Hopper/Blackwell: add FSP message structures John Hubbard
2026-01-31 0:55 ` [PATCH v2 21/30] gpu: nova-core: Hopper/Blackwell: add FMC signature extraction John Hubbard
2026-01-31 0:55 ` John Hubbard [this message]
2026-01-31 0:55 ` [PATCH v2 23/30] gpu: nova-core: Hopper/Blackwell: add FSP Chain of Trust boot John Hubbard
2026-01-31 0:55 ` [PATCH v2 24/30] gpu: nova-core: Hopper/Blackwell: larger non-WPR heap John Hubbard
2026-01-31 0:55 ` [PATCH v2 25/30] gpu: nova-core: Hopper/Blackwell: larger WPR2 (GSP) heap John Hubbard
2026-01-31 0:56 ` [PATCH v2 26/30] gpu: nova-core: refactor SEC2 booter loading into run_booter() helper John Hubbard
2026-01-31 0:56 ` [PATCH v2 27/30] gpu: nova-core: Hopper/Blackwell: add GSP lockdown release polling John Hubbard
2026-01-31 0:56 ` [PATCH v2 28/30] gpu: nova-core: Hopper/Blackwell: add FSP Chain of Trust boot path John Hubbard
2026-01-31 0:56 ` [PATCH v2 29/30] gpu: nova-core: Hopper/Blackwell: new location for PCI config mirror John Hubbard
2026-01-31 0:56 ` [PATCH v2 30/30] gpu: nova-core: clarify the GPU firmware boot steps John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260131005604.454172-23-jhubbard@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=dakr@kernel.org \
--cc=ecourtney@nvidia.com \
--cc=gary@garyguo.net \
--cc=joelagnelf@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=nouveau@lists.freedesktop.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=simona@ffwll.ch \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox