From: "Mukesh Kumar Chaurasiya (IBM)" <mkchauras@gmail.com>
To: linkmauve@linkmauve.fr, ojeda@kernel.org, boqun.feng@gmail.com,
gary@garyguo.net, bjorn3_gh@protonmail.com, lossin@kernel.org,
a.hindborg@kernel.org, aliceryhl@google.com, tmgross@umich.edu,
dakr@kernel.org, corbet@lwn.net, maddy@linux.ibm.com,
mpe@ellerman.id.au, npiggin@gmail.com, chleroy@kernel.org,
peterz@infradead.org, jpoimboe@kernel.org, jbaron@akamai.com,
rostedt@goodmis.org, ardb@kernel.org,
rust-for-linux@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Cc: "Mukesh Kumar Chaurasiya (IBM)" <mkchauras@gmail.com>
Subject: [PATCH V6 2/3] rust: Add PowerPC support
Date: Tue, 10 Feb 2026 14:30:21 +0530 [thread overview]
Message-ID: <20260210090023.2587534-3-mkchauras@gmail.com> (raw)
In-Reply-To: <20260210090023.2587534-1-mkchauras@gmail.com>
From: Link Mauve <linkmauve@linkmauve.fr>
For now only Big Endian 32-bit PowerPC is supported, as that is the only
hardware I have. This has been tested on the Nintendo Wii so far, but I
plan on also using it on the GameCube, Wii U and Apple G4.
These changes aren’t the only ones required to get the kernel to compile
and link on PowerPC, libcore will also have to be changed to not use
integer division to format u64, u128 and core::time::Duration, otherwise
__udivdi3() and __umoddi3() will have to be added. I have tested this
change by replacing the three implementations with unimplemented!() and
it linked just fine.
Signed-off-by: Link Mauve <linkmauve@linkmauve.fr>
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
---
Documentation/rust/arch-support.rst | 1 +
arch/powerpc/Kconfig | 1 +
arch/powerpc/Makefile | 2 ++
rust/Makefile | 4 +++-
4 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst
index 6e6a515d0899..70b9e192a7a0 100644
--- a/Documentation/rust/arch-support.rst
+++ b/Documentation/rust/arch-support.rst
@@ -18,6 +18,7 @@ Architecture Level of support Constraints
``arm`` Maintained ARMv7 Little Endian only.
``arm64`` Maintained Little Endian only.
``loongarch`` Maintained \-
+``powerpc`` Maintained 32-bit Big Endian only.
``riscv`` Maintained ``riscv64`` and LLVM/Clang only.
``um`` Maintained \-
``x86`` Maintained ``x86_64`` only.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9537a61ebae0..17db23b82e91 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -283,6 +283,7 @@ config PPC
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE
select HAVE_RSEQ
+ select HAVE_RUST if PPC32
select HAVE_SAMPLE_FTRACE_DIRECT if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
select HAVE_SAMPLE_FTRACE_DIRECT_MULTI if HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
select HAVE_SETUP_PER_CPU_AREA if PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index a58b1029592c..9fd82c75dcbd 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -61,6 +61,8 @@ else
KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o
endif
+KBUILD_RUSTFLAGS += --target=powerpc-unknown-linux-gnu
+
ifdef CONFIG_CPU_LITTLE_ENDIAN
KBUILD_CPPFLAGS += -mlittle-endian
KBUILD_LDFLAGS += -EL
diff --git a/rust/Makefile b/rust/Makefile
index 4dcc2eff51cb..ae22f2c5f0b3 100644
--- a/rust/Makefile
+++ b/rust/Makefile
@@ -384,13 +384,15 @@ bindgen_skip_c_flags := -mno-fp-ret-in-387 -mpreferred-stack-boundary=% \
-fstrict-flex-arrays=% -fmin-function-alignment=% \
-fzero-init-padding-bits=% -mno-fdpic \
-fdiagnostics-show-context -fdiagnostics-show-context=% \
- --param=% --param asan-% -fno-isolate-erroneous-paths-dereference
+ --param=% --param asan-% -fno-isolate-erroneous-paths-dereference \
+ -ffixed-r2 -mmultiple -mno-readonly-in-sdata
# Derived from `scripts/Makefile.clang`.
BINDGEN_TARGET_x86 := x86_64-linux-gnu
BINDGEN_TARGET_arm64 := aarch64-linux-gnu
BINDGEN_TARGET_arm := arm-linux-gnueabi
BINDGEN_TARGET_loongarch := loongarch64-linux-gnusf
+BINDGEN_TARGET_powerpc := powerpc-linux-gnu
BINDGEN_TARGET_um := $(BINDGEN_TARGET_$(SUBARCH))
BINDGEN_TARGET := $(BINDGEN_TARGET_$(SRCARCH))
--
2.53.0
next prev parent reply other threads:[~2026-02-10 9:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-10 9:00 [PATCH V6 0/3] Rust support for powerpc Mukesh Kumar Chaurasiya (IBM)
2026-02-10 9:00 ` [PATCH V6 1/3] powerpc/jump_label: adjust inline asm to be consistent Mukesh Kumar Chaurasiya (IBM)
2026-02-10 9:00 ` Mukesh Kumar Chaurasiya (IBM) [this message]
2026-02-22 18:09 ` [PATCH V6 2/3] rust: Add PowerPC support Alice Ryhl
2026-02-22 19:07 ` Link Mauve
2026-02-22 19:11 ` Miguel Ojeda
2026-02-23 2:26 ` Mukesh Kumar Chaurasiya
2026-02-23 9:22 ` Alice Ryhl
2026-02-24 4:57 ` Mukesh Kumar Chaurasiya
2026-02-23 15:31 ` Miguel Ojeda
2026-02-24 4:59 ` Mukesh Kumar Chaurasiya
2026-02-24 8:58 ` Ralf Jung
2026-03-02 5:55 ` Mukesh Kumar Chaurasiya
2026-03-02 7:29 ` Alice Ryhl
2026-03-02 12:28 ` Ralf Jung
2026-02-10 9:00 ` [PATCH V6 3/3] powerpc: Enable Rust for ppc64le Mukesh Kumar Chaurasiya (IBM)
2026-03-25 8:29 ` [PATCH V6 0/3] Rust support for powerpc Madhavan Srinivasan
2026-03-26 22:16 ` Mukesh Kumar Chaurasiya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260210090023.2587534-3-mkchauras@gmail.com \
--to=mkchauras@gmail.com \
--cc=a.hindborg@kernel.org \
--cc=aliceryhl@google.com \
--cc=ardb@kernel.org \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=chleroy@kernel.org \
--cc=corbet@lwn.net \
--cc=dakr@kernel.org \
--cc=gary@garyguo.net \
--cc=jbaron@akamai.com \
--cc=jpoimboe@kernel.org \
--cc=linkmauve@linkmauve.fr \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lossin@kernel.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=ojeda@kernel.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=tmgross@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox