From: Alexandre Courbot <acourbot@nvidia.com>
To: "Danilo Krummrich" <dakr@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Daniel Almeida" <daniel.almeida@collabora.com>,
"Miguel Ojeda" <ojeda@kernel.org>, "Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Trevor Gross" <tmgross@umich.edu>,
"Boqun Feng" <boqun@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>,
John Hubbard <jhubbard@nvidia.com>,
Alistair Popple <apopple@nvidia.com>,
Joel Fernandes <joelagnelf@nvidia.com>,
Timur Tabi <ttabi@nvidia.com>, Edwin Peer <epeer@nvidia.com>,
Eliot Courtney <ecourtney@nvidia.com>,
Dirk Behme <dirk.behme@de.bosch.com>,
Steven Price <steven.price@arm.com>,
rust-for-linux@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH v8 06/10] rust: io: use generic read/write accessors for primitive accesses
Date: Tue, 10 Mar 2026 00:14:03 +0900 [thread overview]
Message-ID: <20260310-register-v8-6-424f80dd43bc@nvidia.com> (raw)
In-Reply-To: <20260310-register-v8-0-424f80dd43bc@nvidia.com>
By providing the required `IoLoc` implementations on `usize`, we can
leverage the generic accessors and reduce the number of unsafe blocks in
the module.
This also allows us to directly call the generic `read/write/update`
methods with primitive types, so add examples illustrating this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
rust/kernel/io.rs | 199 +++++++++++++++++++++++++++++++++++-------------------
1 file changed, 131 insertions(+), 68 deletions(-)
diff --git a/rust/kernel/io.rs b/rust/kernel/io.rs
index 1db6572f4a42..ed6fab001a39 100644
--- a/rust/kernel/io.rs
+++ b/rust/kernel/io.rs
@@ -197,6 +197,25 @@ pub trait IoLoc<T> {
fn offset(&self) -> usize;
}
+/// Implements [`IoLoc<$ty>`] for [`usize`], allowing to use `usize` as a parameter of
+/// [`Io::read`] and [`Io::write`].
+macro_rules! impl_usize_ioloc {
+ ($($ty:ty),*) => {
+ $(
+ impl IoLoc<$ty> for usize {
+ type IoType = $ty;
+
+ fn offset(&self) -> usize {
+ *self
+ }
+ }
+ )*
+ }
+}
+
+// Provide the ability to read any primitive type from a [`usize`].
+impl_usize_ioloc!(u8, u16, u32, u64);
+
/// Types implementing this trait (e.g. MMIO BARs or PCI config regions)
/// can perform I/O operations on regions of memory.
///
@@ -241,10 +260,7 @@ fn try_read8(&self, offset: usize) -> Result<u8>
where
Self: IoCapable<u8>,
{
- let address = self.io_addr::<u8>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- Ok(unsafe { self.io_read(address) })
+ self.try_read(offset)
}
/// Fallible 16-bit read with runtime bounds check.
@@ -253,10 +269,7 @@ fn try_read16(&self, offset: usize) -> Result<u16>
where
Self: IoCapable<u16>,
{
- let address = self.io_addr::<u16>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- Ok(unsafe { self.io_read(address) })
+ self.try_read(offset)
}
/// Fallible 32-bit read with runtime bounds check.
@@ -265,10 +278,7 @@ fn try_read32(&self, offset: usize) -> Result<u32>
where
Self: IoCapable<u32>,
{
- let address = self.io_addr::<u32>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- Ok(unsafe { self.io_read(address) })
+ self.try_read(offset)
}
/// Fallible 64-bit read with runtime bounds check.
@@ -277,10 +287,7 @@ fn try_read64(&self, offset: usize) -> Result<u64>
where
Self: IoCapable<u64>,
{
- let address = self.io_addr::<u64>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- Ok(unsafe { self.io_read(address) })
+ self.try_read(offset)
}
/// Fallible 8-bit write with runtime bounds check.
@@ -289,11 +296,7 @@ fn try_write8(&self, value: u8, offset: usize) -> Result
where
Self: IoCapable<u8>,
{
- let address = self.io_addr::<u8>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- unsafe { self.io_write(value, address) };
- Ok(())
+ self.try_write(offset, value)
}
/// Fallible 16-bit write with runtime bounds check.
@@ -302,11 +305,7 @@ fn try_write16(&self, value: u16, offset: usize) -> Result
where
Self: IoCapable<u16>,
{
- let address = self.io_addr::<u16>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- unsafe { self.io_write(value, address) };
- Ok(())
+ self.try_write(offset, value)
}
/// Fallible 32-bit write with runtime bounds check.
@@ -315,11 +314,7 @@ fn try_write32(&self, value: u32, offset: usize) -> Result
where
Self: IoCapable<u32>,
{
- let address = self.io_addr::<u32>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- unsafe { self.io_write(value, address) };
- Ok(())
+ self.try_write(offset, value)
}
/// Fallible 64-bit write with runtime bounds check.
@@ -328,11 +323,7 @@ fn try_write64(&self, value: u64, offset: usize) -> Result
where
Self: IoCapable<u64>,
{
- let address = self.io_addr::<u64>(offset)?;
-
- // SAFETY: `address` has been validated by `io_addr`.
- unsafe { self.io_write(value, address) };
- Ok(())
+ self.try_write(offset, value)
}
/// Infallible 8-bit read with compile-time bounds check.
@@ -341,10 +332,7 @@ fn read8(&self, offset: usize) -> u8
where
Self: IoKnownSize + IoCapable<u8>,
{
- let address = self.io_addr_assert::<u8>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_read(address) }
+ self.read(offset)
}
/// Infallible 16-bit read with compile-time bounds check.
@@ -353,10 +341,7 @@ fn read16(&self, offset: usize) -> u16
where
Self: IoKnownSize + IoCapable<u16>,
{
- let address = self.io_addr_assert::<u16>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_read(address) }
+ self.read(offset)
}
/// Infallible 32-bit read with compile-time bounds check.
@@ -365,10 +350,7 @@ fn read32(&self, offset: usize) -> u32
where
Self: IoKnownSize + IoCapable<u32>,
{
- let address = self.io_addr_assert::<u32>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_read(address) }
+ self.read(offset)
}
/// Infallible 64-bit read with compile-time bounds check.
@@ -377,10 +359,7 @@ fn read64(&self, offset: usize) -> u64
where
Self: IoKnownSize + IoCapable<u64>,
{
- let address = self.io_addr_assert::<u64>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_read(address) }
+ self.read(offset)
}
/// Infallible 8-bit write with compile-time bounds check.
@@ -389,10 +368,7 @@ fn write8(&self, value: u8, offset: usize)
where
Self: IoKnownSize + IoCapable<u8>,
{
- let address = self.io_addr_assert::<u8>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_write(value, address) }
+ self.write(offset, value)
}
/// Infallible 16-bit write with compile-time bounds check.
@@ -401,10 +377,7 @@ fn write16(&self, value: u16, offset: usize)
where
Self: IoKnownSize + IoCapable<u16>,
{
- let address = self.io_addr_assert::<u16>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_write(value, address) }
+ self.write(offset, value)
}
/// Infallible 32-bit write with compile-time bounds check.
@@ -413,10 +386,7 @@ fn write32(&self, value: u32, offset: usize)
where
Self: IoKnownSize + IoCapable<u32>,
{
- let address = self.io_addr_assert::<u32>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_write(value, address) }
+ self.write(offset, value)
}
/// Infallible 64-bit write with compile-time bounds check.
@@ -425,13 +395,28 @@ fn write64(&self, value: u64, offset: usize)
where
Self: IoKnownSize + IoCapable<u64>,
{
- let address = self.io_addr_assert::<u64>(offset);
-
- // SAFETY: `address` has been validated by `io_addr_assert`.
- unsafe { self.io_write(value, address) }
+ self.write(offset, value)
}
/// Generic fallible read with runtime bounds check.
+ ///
+ /// # Examples
+ ///
+ /// Read a primitive type from an I/O address:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_reads(io: &Mmio) -> Result {
+ /// // 32-bit read from address `0x10`.
+ /// let v: u32 = io.try_read(0x10)?;
+ ///
+ /// // 8-bit read from address `0xfff`.
+ /// let v: u8 = io.try_read(0xfff)?;
+ ///
+ /// Ok(())
+ /// }
+ /// ```
#[inline(always)]
fn try_read<T, L>(&self, location: L) -> Result<T>
where
@@ -445,6 +430,24 @@ fn try_read<T, L>(&self, location: L) -> Result<T>
}
/// Generic fallible write with runtime bounds check.
+ ///
+ /// # Examples
+ ///
+ /// Write a primitive type to an I/O address:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_writes(io: &Mmio) -> Result {
+ /// // 32-bit write of value `1` at address `0x10`.
+ /// io.try_write(0x10, 1u32)?;
+ ///
+ /// // 8-bit write of value `0xff` at address `0xfff`.
+ /// io.try_write(0xfff, 0xffu8)?;
+ ///
+ /// Ok(())
+ /// }
+ /// ```
#[inline(always)]
fn try_write<T, L>(&self, location: L, value: T) -> Result
where
@@ -464,6 +467,20 @@ fn try_write<T, L>(&self, location: L, value: T) -> Result
///
/// Caution: this does not perform any synchronization. Race conditions can occur in case of
/// concurrent access.
+ ///
+ /// # Examples
+ ///
+ /// Read the u32 value at address `0x10`, increment it, and store the updated value back:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_update(io: &Mmio<0x1000>) -> Result {
+ /// io.try_update(0x10, |v: u32| {
+ /// v + 1
+ /// })
+ /// }
+ /// ```
#[inline(always)]
fn try_update<T, L, F>(&self, location: L, f: F) -> Result
where
@@ -484,6 +501,22 @@ fn try_update<T, L, F>(&self, location: L, f: F) -> Result
}
/// Generic infallible read with compile-time bounds check.
+ ///
+ /// # Examples
+ ///
+ /// Read a primitive type from an I/O address:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_reads(io: &Mmio<0x1000>) {
+ /// // 32-bit read from address `0x10`.
+ /// let v: u32 = io.read(0x10);
+ ///
+ /// // 8-bit read from the top of the I/O space.
+ /// let v: u8 = io.read(0xfff);
+ /// }
+ /// ```
#[inline(always)]
fn read<T, L>(&self, location: L) -> T
where
@@ -497,6 +530,22 @@ fn read<T, L>(&self, location: L) -> T
}
/// Generic infallible write with compile-time bounds check.
+ ///
+ /// # Examples
+ ///
+ /// Write a primitive type to an I/O address:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_writes(io: &Mmio<0x1000>) {
+ /// // 32-bit write of value `1` at address `0x10`.
+ /// io.write(0x10, 1u32);
+ ///
+ /// // 8-bit write of value `0xff` at the top of the I/O space.
+ /// io.write(0xfff, 0xffu8);
+ /// }
+ /// ```
#[inline(always)]
fn write<T, L>(&self, location: L, value: T)
where
@@ -514,6 +563,20 @@ fn write<T, L>(&self, location: L, value: T)
///
/// Caution: this does not perform any synchronization. Race conditions can occur in case of
/// concurrent access.
+ ///
+ /// # Examples
+ ///
+ /// Read the u32 value at address `0x10`, increment it, and store the updated value back:
+ ///
+ /// ```no_run
+ /// use kernel::io::{Io, Mmio};
+ ///
+ /// fn do_update(io: &Mmio<0x1000>) {
+ /// io.update(0x10, |v: u32| {
+ /// v + 1
+ /// })
+ /// }
+ /// ```
#[inline(always)]
fn update<T, L, F>(&self, location: L, f: F)
where
--
2.53.0
next prev parent reply other threads:[~2026-03-09 15:14 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-09 15:13 [PATCH v8 00/10] rust: add `register!` macro Alexandre Courbot
2026-03-09 15:13 ` [PATCH v8 01/10] rust: enable the `generic_arg_infer` feature Alexandre Courbot
2026-03-11 0:13 ` Yury Norov
2026-03-11 6:16 ` Miguel Ojeda
2026-03-09 15:13 ` [PATCH v8 02/10] rust: num: add `shr` and `shl` methods to `Bounded` Alexandre Courbot
2026-03-11 0:26 ` Yury Norov
2026-03-09 15:14 ` [PATCH v8 03/10] rust: num: add `into_bool` method " Alexandre Courbot
2026-03-11 0:29 ` Yury Norov
2026-03-09 15:14 ` [PATCH v8 04/10] rust: num: make Bounded::get const Alexandre Courbot
2026-03-09 15:14 ` [PATCH v8 05/10] rust: io: add IoLoc type and generic I/O accessors Alexandre Courbot
2026-03-10 15:15 ` Danilo Krummrich
2026-03-09 15:14 ` Alexandre Courbot [this message]
2026-03-09 15:29 ` [PATCH v8 06/10] rust: io: use generic read/write accessors for primitive accesses Gary Guo
2026-03-10 1:57 ` Alexandre Courbot
2026-03-10 1:59 ` Alexandre Courbot
2026-03-10 2:04 ` Gary Guo
2026-03-10 15:17 ` Danilo Krummrich
2026-03-09 15:14 ` [PATCH v8 07/10] rust: io: introduce `IntoIoVal` trait and single-argument `write_val` Alexandre Courbot
2026-03-09 15:30 ` Gary Guo
2026-03-10 2:05 ` Alexandre Courbot
2026-03-10 16:34 ` Danilo Krummrich
2026-03-10 22:33 ` Gary Guo
2026-03-11 13:25 ` Danilo Krummrich
2026-03-11 13:42 ` Alexandre Courbot
2026-03-11 13:28 ` Alexandre Courbot
2026-03-11 14:56 ` Danilo Krummrich
2026-03-11 15:42 ` Gary Guo
2026-03-11 16:22 ` Danilo Krummrich
2026-03-11 17:16 ` Gary Guo
2026-03-12 13:53 ` Alexandre Courbot
2026-03-12 15:54 ` Danilo Krummrich
2026-03-14 1:19 ` Alexandre Courbot
2026-03-09 15:14 ` [PATCH v8 08/10] rust: io: add `register!` macro Alexandre Courbot
2026-03-10 16:39 ` Danilo Krummrich
2026-03-09 15:14 ` [PATCH v8 09/10] sample: rust: pci: use " Alexandre Courbot
2026-03-09 15:14 ` [PATCH FOR REFERENCE v8 10/10] gpu: nova-core: use the kernel " Alexandre Courbot
2026-03-09 15:43 ` Joel Fernandes
2026-03-09 17:34 ` John Hubbard
2026-03-09 17:51 ` Joel Fernandes
2026-03-09 18:01 ` John Hubbard
2026-03-09 18:28 ` Gary Guo
2026-03-09 18:34 ` John Hubbard
2026-03-09 18:42 ` Danilo Krummrich
2026-03-09 18:47 ` John Hubbard
2026-03-09 18:42 ` Gary Guo
2026-03-09 18:50 ` John Hubbard
2026-03-09 18:04 ` Danilo Krummrich
2026-03-09 18:06 ` John Hubbard
2026-03-10 2:18 ` Alexandre Courbot
2026-03-09 18:05 ` [PATCH v8 00/10] rust: add " John Hubbard
2026-03-09 21:08 ` Daniel Almeida
2026-03-10 17:20 ` Danilo Krummrich
2026-03-11 13:01 ` Alexandre Courbot
2026-03-11 13:07 ` Danilo Krummrich
2026-03-11 13:35 ` Alexandre Courbot
2026-03-11 13:38 ` Danilo Krummrich
2026-03-12 2:23 ` Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310-register-v8-6-424f80dd43bc@nvidia.com \
--to=acourbot@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun@kernel.org \
--cc=dakr@kernel.org \
--cc=daniel.almeida@collabora.com \
--cc=dirk.behme@de.bosch.com \
--cc=ecourtney@nvidia.com \
--cc=epeer@nvidia.com \
--cc=gary@garyguo.net \
--cc=jhubbard@nvidia.com \
--cc=joelagnelf@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=steven.price@arm.com \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox