From: Alexandre Courbot <acourbot@nvidia.com>
To: "Danilo Krummrich" <dakr@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Daniel Almeida" <daniel.almeida@collabora.com>,
"Miguel Ojeda" <ojeda@kernel.org>, "Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Trevor Gross" <tmgross@umich.edu>,
"Boqun Feng" <boqun@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>,
John Hubbard <jhubbard@nvidia.com>,
Alistair Popple <apopple@nvidia.com>,
Joel Fernandes <joelagnelf@nvidia.com>,
Timur Tabi <ttabi@nvidia.com>, Edwin Peer <epeer@nvidia.com>,
Eliot Courtney <ecourtney@nvidia.com>,
Dirk Behme <dirk.behme@de.bosch.com>,
Steven Price <steven.price@arm.com>,
rust-for-linux@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH v8 09/10] sample: rust: pci: use `register!` macro
Date: Tue, 10 Mar 2026 00:14:06 +0900 [thread overview]
Message-ID: <20260310-register-v8-9-424f80dd43bc@nvidia.com> (raw)
In-Reply-To: <20260310-register-v8-0-424f80dd43bc@nvidia.com>
Convert the direct IO accesses to properly defined registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
samples/rust/rust_driver_pci.rs | 84 +++++++++++++++++++++++++++++++----------
1 file changed, 64 insertions(+), 20 deletions(-)
diff --git a/samples/rust/rust_driver_pci.rs b/samples/rust/rust_driver_pci.rs
index d3d4a7931deb..3f52cfcb7f4b 100644
--- a/samples/rust/rust_driver_pci.rs
+++ b/samples/rust/rust_driver_pci.rs
@@ -8,27 +8,58 @@
device::Bound,
device::Core,
devres::Devres,
- io::Io,
+ io::{
+ register::Array,
+ Io, //
+ },
+ num::Bounded,
pci,
prelude::*,
+ register,
sync::aref::ARef, //
};
-struct Regs;
+mod regs {
+ use super::*;
-impl Regs {
- const TEST: usize = 0x0;
- const OFFSET: usize = 0x4;
- const DATA: usize = 0x8;
- const COUNT: usize = 0xC;
- const END: usize = 0x10;
+ register! {
+ pub(super) TEST(u8) @ 0x0 {
+ 7:0 index => TestIndex;
+ }
+
+ pub(super) OFFSET(u32) @ 0x4 {
+ 31:0 offset;
+ }
+
+ pub(super) DATA(u8) @ 0x8 {
+ 7:0 data;
+ }
+
+ pub(super) COUNT(u32) @ 0xC {
+ 31:0 count;
+ }
+ }
+
+ pub(super) const END: usize = 0x10;
}
-type Bar0 = pci::Bar<{ Regs::END }>;
+type Bar0 = pci::Bar<{ regs::END }>;
#[derive(Copy, Clone, Debug)]
struct TestIndex(u8);
+impl From<Bounded<u8, 8>> for TestIndex {
+ fn from(value: Bounded<u8, 8>) -> Self {
+ Self(value.into())
+ }
+}
+
+impl From<TestIndex> for Bounded<u8, 8> {
+ fn from(value: TestIndex) -> Self {
+ value.0.into()
+ }
+}
+
impl TestIndex {
const NO_EVENTFD: Self = Self(0);
}
@@ -54,40 +85,53 @@ struct SampleDriver {
impl SampleDriver {
fn testdev(index: &TestIndex, bar: &Bar0) -> Result<u32> {
// Select the test.
- bar.write8(index.0, Regs::TEST);
+ bar.write_val(regs::TEST::zeroed().with_index(*index));
- let offset = bar.read32(Regs::OFFSET) as usize;
- let data = bar.read8(Regs::DATA);
+ let offset = bar.read(regs::OFFSET).into_raw() as usize;
+ let data = bar.read(regs::DATA).into();
// Write `data` to `offset` to increase `count` by one.
//
// Note that we need `try_write8`, since `offset` can't be checked at compile-time.
bar.try_write8(data, offset)?;
- Ok(bar.read32(Regs::COUNT))
+ Ok(bar.read(regs::COUNT).into())
}
fn config_space(pdev: &pci::Device<Bound>) {
let config = pdev.config_space();
- // TODO: use the register!() macro for defining PCI configuration space registers once it
- // has been move out of nova-core.
+ // Some PCI configuration space registers.
+ register! {
+ VENDOR_ID(u16) @ 0x0 {
+ 15:0 vendor_id;
+ }
+
+ REVISION_ID(u8) @ 0x8 {
+ 7:0 revision_id;
+ }
+
+ BAR(u32)[6] @ 0x10 {
+ 31:0 value;
+ }
+ }
+
dev_info!(
pdev,
"pci-testdev config space read8 rev ID: {:x}\n",
- config.read8(0x8)
+ config.read(REVISION_ID).revision_id()
);
dev_info!(
pdev,
"pci-testdev config space read16 vendor ID: {:x}\n",
- config.read16(0)
+ config.read(VENDOR_ID).vendor_id()
);
dev_info!(
pdev,
"pci-testdev config space read32 BAR 0: {:x}\n",
- config.read32(0x10)
+ config.read(BAR::at(0)).value()
);
}
}
@@ -111,7 +155,7 @@ fn probe(pdev: &pci::Device<Core>, info: &Self::IdInfo) -> impl PinInit<Self, Er
pdev.set_master();
Ok(try_pin_init!(Self {
- bar <- pdev.iomap_region_sized::<{ Regs::END }>(0, c"rust_driver_pci"),
+ bar <- pdev.iomap_region_sized::<{ regs::END }>(0, c"rust_driver_pci"),
index: *info,
_: {
let bar = bar.access(pdev.as_ref())?;
@@ -131,7 +175,7 @@ fn probe(pdev: &pci::Device<Core>, info: &Self::IdInfo) -> impl PinInit<Self, Er
fn unbind(pdev: &pci::Device<Core>, this: Pin<&Self>) {
if let Ok(bar) = this.bar.access(pdev.as_ref()) {
// Reset pci-testdev by writing a new test index.
- bar.write8(this.index.0, Regs::TEST);
+ bar.write_val(regs::TEST::zeroed().with_index(this.index));
}
}
}
--
2.53.0
next prev parent reply other threads:[~2026-03-09 15:14 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-09 15:13 [PATCH v8 00/10] rust: add `register!` macro Alexandre Courbot
2026-03-09 15:13 ` [PATCH v8 01/10] rust: enable the `generic_arg_infer` feature Alexandre Courbot
2026-03-11 0:13 ` Yury Norov
2026-03-11 6:16 ` Miguel Ojeda
2026-03-09 15:13 ` [PATCH v8 02/10] rust: num: add `shr` and `shl` methods to `Bounded` Alexandre Courbot
2026-03-11 0:26 ` Yury Norov
2026-03-09 15:14 ` [PATCH v8 03/10] rust: num: add `into_bool` method " Alexandre Courbot
2026-03-11 0:29 ` Yury Norov
2026-03-09 15:14 ` [PATCH v8 04/10] rust: num: make Bounded::get const Alexandre Courbot
2026-03-09 15:14 ` [PATCH v8 05/10] rust: io: add IoLoc type and generic I/O accessors Alexandre Courbot
2026-03-10 15:15 ` Danilo Krummrich
2026-03-09 15:14 ` [PATCH v8 06/10] rust: io: use generic read/write accessors for primitive accesses Alexandre Courbot
2026-03-09 15:29 ` Gary Guo
2026-03-10 1:57 ` Alexandre Courbot
2026-03-10 1:59 ` Alexandre Courbot
2026-03-10 2:04 ` Gary Guo
2026-03-10 15:17 ` Danilo Krummrich
2026-03-09 15:14 ` [PATCH v8 07/10] rust: io: introduce `IntoIoVal` trait and single-argument `write_val` Alexandre Courbot
2026-03-09 15:30 ` Gary Guo
2026-03-10 2:05 ` Alexandre Courbot
2026-03-10 16:34 ` Danilo Krummrich
2026-03-10 22:33 ` Gary Guo
2026-03-11 13:25 ` Danilo Krummrich
2026-03-11 13:42 ` Alexandre Courbot
2026-03-11 13:28 ` Alexandre Courbot
2026-03-11 14:56 ` Danilo Krummrich
2026-03-11 15:42 ` Gary Guo
2026-03-11 16:22 ` Danilo Krummrich
2026-03-11 17:16 ` Gary Guo
2026-03-12 13:53 ` Alexandre Courbot
2026-03-12 15:54 ` Danilo Krummrich
2026-03-14 1:19 ` Alexandre Courbot
2026-03-09 15:14 ` [PATCH v8 08/10] rust: io: add `register!` macro Alexandre Courbot
2026-03-10 16:39 ` Danilo Krummrich
2026-03-09 15:14 ` Alexandre Courbot [this message]
2026-03-09 15:14 ` [PATCH FOR REFERENCE v8 10/10] gpu: nova-core: use the kernel " Alexandre Courbot
2026-03-09 15:43 ` Joel Fernandes
2026-03-09 17:34 ` John Hubbard
2026-03-09 17:51 ` Joel Fernandes
2026-03-09 18:01 ` John Hubbard
2026-03-09 18:28 ` Gary Guo
2026-03-09 18:34 ` John Hubbard
2026-03-09 18:42 ` Danilo Krummrich
2026-03-09 18:47 ` John Hubbard
2026-03-09 18:42 ` Gary Guo
2026-03-09 18:50 ` John Hubbard
2026-03-09 18:04 ` Danilo Krummrich
2026-03-09 18:06 ` John Hubbard
2026-03-10 2:18 ` Alexandre Courbot
2026-03-09 18:05 ` [PATCH v8 00/10] rust: add " John Hubbard
2026-03-09 21:08 ` Daniel Almeida
2026-03-10 17:20 ` Danilo Krummrich
2026-03-11 13:01 ` Alexandre Courbot
2026-03-11 13:07 ` Danilo Krummrich
2026-03-11 13:35 ` Alexandre Courbot
2026-03-11 13:38 ` Danilo Krummrich
2026-03-12 2:23 ` Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310-register-v8-9-424f80dd43bc@nvidia.com \
--to=acourbot@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun@kernel.org \
--cc=dakr@kernel.org \
--cc=daniel.almeida@collabora.com \
--cc=dirk.behme@de.bosch.com \
--cc=ecourtney@nvidia.com \
--cc=epeer@nvidia.com \
--cc=gary@garyguo.net \
--cc=jhubbard@nvidia.com \
--cc=joelagnelf@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=steven.price@arm.com \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox