From: John Hubbard <jhubbard@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>
Cc: "Joel Fernandes" <joelagnelf@nvidia.com>,
"Timur Tabi" <ttabi@nvidia.com>,
"Alistair Popple" <apopple@nvidia.com>,
"Eliot Courtney" <ecourtney@nvidia.com>,
"Shashank Sharma" <shashanks@nvidia.com>,
"Zhi Wang" <zhiw@nvidia.com>, "David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Alex Gaynor" <alex.gaynor@gmail.com>,
"Boqun Feng" <boqun.feng@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
rust-for-linux@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
"John Hubbard" <jhubbard@nvidia.com>
Subject: [PATCH v10 03/28] gpu: nova-core: Hopper/Blackwell: basic GPU identification
Date: Fri, 10 Apr 2026 19:49:28 -0700 [thread overview]
Message-ID: <20260411024953.473149-4-jhubbard@nvidia.com> (raw)
In-Reply-To: <20260411024953.473149-1-jhubbard@nvidia.com>
Hopper (GH100) and Blackwell identification, including ELF
.fwsignature_* items.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/gpu/nova-core/falcon/hal.rs | 6 +++++-
drivers/gpu/nova-core/fb/hal.rs | 5 ++++-
drivers/gpu/nova-core/firmware/gsp.rs | 3 +++
drivers/gpu/nova-core/gpu.rs | 18 ++++++++++++++++++
4 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/nova-core/falcon/hal.rs b/drivers/gpu/nova-core/falcon/hal.rs
index 3bfb42684a0e..51615381b495 100644
--- a/drivers/gpu/nova-core/falcon/hal.rs
+++ b/drivers/gpu/nova-core/falcon/hal.rs
@@ -84,7 +84,11 @@ pub(super) fn falcon_hal<E: FalconEngine + 'static>(
// TODO: support GA100. Its boot sequence is a lot like Turing, except that it handles the
// FRTS steps differently (specifically, it skips FWSEC-FRTS).
Architecture::Ampere if chipset == Chipset::GA100 => return Err(ENOTSUPP),
- Architecture::Ampere | Architecture::Ada => {
+ Architecture::Ampere
+ | Architecture::Ada
+ | Architecture::Hopper
+ | Architecture::BlackwellGB10x
+ | Architecture::BlackwellGB20x => {
KBox::new(ga102::Ga102::<E>::new(), GFP_KERNEL)? as KBox<dyn FalconHal<E>>
}
};
diff --git a/drivers/gpu/nova-core/fb/hal.rs b/drivers/gpu/nova-core/fb/hal.rs
index 5a6cb8221e78..3b3bad0feed0 100644
--- a/drivers/gpu/nova-core/fb/hal.rs
+++ b/drivers/gpu/nova-core/fb/hal.rs
@@ -36,6 +36,9 @@ pub(super) fn fb_hal(chipset: Chipset) -> &'static dyn FbHal {
Architecture::Turing => tu102::TU102_HAL,
Architecture::Ampere if chipset == Chipset::GA100 => ga100::GA100_HAL,
Architecture::Ampere => ga102::GA102_HAL,
- Architecture::Ada => ga102::GA102_HAL,
+ Architecture::Ada
+ | Architecture::Hopper
+ | Architecture::BlackwellGB10x
+ | Architecture::BlackwellGB20x => ga102::GA102_HAL,
}
}
diff --git a/drivers/gpu/nova-core/firmware/gsp.rs b/drivers/gpu/nova-core/firmware/gsp.rs
index 1fbc2b08123a..617ec2aaa93a 100644
--- a/drivers/gpu/nova-core/firmware/gsp.rs
+++ b/drivers/gpu/nova-core/firmware/gsp.rs
@@ -73,6 +73,9 @@ fn find_gsp_sigs_section(chipset: Chipset) -> &'static str {
Architecture::Ampere if chipset == Chipset::GA100 => ".fwsignature_tu10x",
Architecture::Ampere => ".fwsignature_ga10x",
Architecture::Ada => ".fwsignature_ad10x",
+ Architecture::Hopper => ".fwsignature_gh10x",
+ Architecture::BlackwellGB10x => ".fwsignature_gb10x",
+ Architecture::BlackwellGB20x => ".fwsignature_gb20x",
}
}
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 0f6fe9a1b955..20625e8e26b7 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -86,12 +86,22 @@ fn try_from(value: u32) -> Result<Self, Self::Error> {
GA104 = 0x174,
GA106 = 0x176,
GA107 = 0x177,
+ // Hopper
+ GH100 = 0x180,
// Ada
AD102 = 0x192,
AD103 = 0x193,
AD104 = 0x194,
AD106 = 0x196,
AD107 = 0x197,
+ // Blackwell
+ GB100 = 0x1a0,
+ GB102 = 0x1a2,
+ GB202 = 0x1b2,
+ GB203 = 0x1b3,
+ GB205 = 0x1b5,
+ GB206 = 0x1b6,
+ GB207 = 0x1b7,
});
impl Chipset {
@@ -103,9 +113,14 @@ pub(crate) const fn arch(self) -> Architecture {
Self::GA100 | Self::GA102 | Self::GA103 | Self::GA104 | Self::GA106 | Self::GA107 => {
Architecture::Ampere
}
+ Self::GH100 => Architecture::Hopper,
Self::AD102 | Self::AD103 | Self::AD104 | Self::AD106 | Self::AD107 => {
Architecture::Ada
}
+ Self::GB100 | Self::GB102 => Architecture::BlackwellGB10x,
+ Self::GB202 | Self::GB203 | Self::GB205 | Self::GB206 | Self::GB207 => {
+ Architecture::BlackwellGB20x
+ }
}
}
@@ -137,7 +152,10 @@ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
pub(crate) enum Architecture with TryFrom<Bounded<u32, 6>> {
Turing = 0x16,
Ampere = 0x17,
+ Hopper = 0x18,
Ada = 0x19,
+ BlackwellGB10x = 0x1a,
+ BlackwellGB20x = 0x1b,
}
}
--
2.53.0
next prev parent reply other threads:[~2026-04-11 2:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-11 2:49 [PATCH v10 00/28] gpu: nova-core: firmware: Hopper/Blackwell support John Hubbard
2026-04-11 2:49 ` [PATCH v10 01/28] gpu: nova-core: factor .fwsignature* selection into a new find_gsp_sigs_section() John Hubbard
2026-04-11 2:49 ` [PATCH v10 02/28] gpu: nova-core: use GPU Architecture to simplify HAL selections John Hubbard
2026-04-11 2:49 ` John Hubbard [this message]
2026-04-11 3:58 ` [PATCH v10 03/28] gpu: nova-core: Hopper/Blackwell: basic GPU identification Timur Tabi
2026-04-11 2:49 ` [PATCH v10 04/28] gpu: nova-core: add Copy/Clone to Spec and Revision John Hubbard
2026-04-11 2:49 ` [PATCH v10 05/28] gpu: nova-core: set DMA mask width based on GPU architecture John Hubbard
2026-04-11 2:49 ` [PATCH v10 06/28] gpu: nova-core: move GFW boot wait into a GPU HAL John Hubbard
2026-04-11 2:49 ` [PATCH v10 07/28] gpu: nova-core: Hopper/Blackwell: skip GFW boot waiting John Hubbard
2026-04-11 2:49 ` [PATCH v10 08/28] gpu: nova-core: Blackwell: calculate reserved FB heap size John Hubbard
2026-04-11 2:49 ` [PATCH v10 09/28] gpu: nova-core: Hopper/Blackwell: new location for PCI config mirror John Hubbard
2026-04-11 2:49 ` [PATCH v10 10/28] gpu: nova-core: refactor SEC2 booter loading into BooterFirmware::run() John Hubbard
2026-04-11 2:49 ` [PATCH v10 11/28] gpu: nova-core: Hopper/Blackwell: integrate FSP boot path into boot() John Hubbard
2026-04-11 2:49 ` [PATCH v10 12/28] gpu: nova-core: don't assume 64-bit firmware images John Hubbard
2026-04-11 2:49 ` [PATCH v10 13/28] gpu: nova-core: add support for 32-bit " John Hubbard
2026-04-11 2:49 ` [PATCH v10 14/28] gpu: nova-core: add auto-detection of 32-bit, 64-bit " John Hubbard
2026-04-11 2:49 ` [PATCH v10 15/28] gpu: nova-core: Hopper/Blackwell: add FSP falcon engine stub John Hubbard
2026-04-11 2:49 ` [PATCH v10 16/28] gpu: nova-core: Hopper/Blackwell: add FMC firmware image, in support of FSP John Hubbard
2026-04-11 2:49 ` [PATCH v10 17/28] gpu: nova-core: Hopper/Blackwell: add FSP secure boot completion waiting John Hubbard
2026-04-11 2:49 ` [PATCH v10 18/28] gpu: nova-core: Hopper/Blackwell: add FMC signature extraction John Hubbard
2026-04-11 2:49 ` [PATCH v10 19/28] gpu: nova-core: Hopper/Blackwell: add FSP falcon EMEM operations John Hubbard
2026-04-11 2:49 ` [PATCH v10 20/28] gpu: nova-core: Hopper/Blackwell: add FSP message infrastructure John Hubbard
2026-04-11 2:49 ` [PATCH v10 21/28] gpu: nova-core: add MCTP/NVDM protocol types for firmware communication John Hubbard
2026-04-11 2:49 ` [PATCH v10 22/28] gpu: nova-core: Hopper/Blackwell: add FSP send/receive messaging John Hubbard
2026-04-11 2:49 ` [PATCH v10 23/28] gpu: nova-core: Hopper/Blackwell: add FspCotVersion type John Hubbard
2026-04-11 2:49 ` [PATCH v10 24/28] gpu: nova-core: Hopper/Blackwell: larger non-WPR heap John Hubbard
2026-04-11 2:49 ` [PATCH v10 25/28] gpu: nova-core: Hopper/Blackwell: add FSP Chain of Trust boot John Hubbard
2026-04-11 2:49 ` [PATCH v10 26/28] gpu: nova-core: Blackwell: use correct sysmem flush registers John Hubbard
2026-04-11 2:49 ` [PATCH v10 27/28] gpu: nova-core: Hopper/Blackwell: larger WPR2 (GSP) heap John Hubbard
2026-04-11 2:49 ` [PATCH v10 28/28] gpu: nova-core: Hopper/Blackwell: add GSP lockdown release polling John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260411024953.473149-4-jhubbard@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=dakr@kernel.org \
--cc=ecourtney@nvidia.com \
--cc=gary@garyguo.net \
--cc=joelagnelf@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=shashanks@nvidia.com \
--cc=simona@ffwll.ch \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox