[PATCH v5 5/7] gpu: nova-core: gsp: shuffle boot code a bit to keep chipset-specific parts close

[Alexandre Courbot <acourbot@nvidia.com>]

Some parts of the GSP boot process are chip-specific actions, whereas
others (like sending the initial post-boot messages) deal directly with
the working GSP.

Reorganize the boot code a bit so the chipset-specific parts are clumped
together, which will make their extraction into a HAL easier.

This has no effect on the GSP boot process.

Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 drivers/gpu/nova-core/gsp/boot.rs | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index e75c4b235aab..2e1401cd6171 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -187,18 +187,13 @@ pub(crate) fn boot(
         let fb_layout = FbLayout::new(chipset, bar, &gsp_fw)?;
         dev_dbg!(dev, "{:#x?}\n", fb_layout);
 
+        let wpr_meta = Coherent::init(dev, GFP_KERNEL, GspFwWprMeta::new(&gsp_fw, &fb_layout))?;
+
         // FWSEC-FRTS is not executed on chips where the FRTS region size is 0 (e.g. GA100).
         if !fb_layout.frts.is_empty() {
             Self::run_fwsec_frts(dev, chipset, gsp_falcon, bar, &bios, &fb_layout)?;
         }
 
-        let wpr_meta = Coherent::init(dev, GFP_KERNEL, GspFwWprMeta::new(&gsp_fw, &fb_layout))?;
-
-        self.cmdq
-            .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev))?;
-        self.cmdq
-            .send_command_no_wait(bar, commands::SetRegistry::new())?;
-
         gsp_falcon.reset(bar)?;
         let libos_handle = self.libos.dma_handle();
         let (mbox0, mbox1) = gsp_falcon.boot(
@@ -227,6 +222,11 @@ pub(crate) fn boot(
 
         dev_dbg!(pdev, "RISC-V active? {}\n", gsp_falcon.is_riscv_active(bar),);
 
+        self.cmdq
+            .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev))?;
+        self.cmdq
+            .send_command_no_wait(bar, commands::SetRegistry::new())?;
+
         // Create and run the GSP sequencer.
         let seq_params = GspSequencerParams {
             bootloader_app_version: gsp_fw.bootloader.app_version,

-- 
2.54.0