Re: [RFC PATCH v3 4/4] iio: position: as5600: add Kconfig and Makefile entries

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 24 May 2026 20:28:23 +0700
Muchamad Coirul Anwar <muchamadcoirulanwar@gmail.com> wrote:

> Add build system integration for the AS5600 Rust IIO driver.
> CONFIG_AS5600 depends on I2C, IIO, and RUST.
> 
> Signed-off-by: Muchamad Coirul Anwar <muchamadcoirulanwar@gmail.com>
Combine with the driver patch.  Separate patches for build files
provide no value.

> ---
>  drivers/iio/position/Kconfig  | 14 ++++++++++++++
>  drivers/iio/position/Makefile |  1 +
>  2 files changed, 15 insertions(+)
> 
> diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
> index 1576a6380b53..dab9310e8079 100644
> --- a/drivers/iio/position/Kconfig
> +++ b/drivers/iio/position/Kconfig
> @@ -6,6 +6,20 @@
>  
>  menu "Linear and angular position sensors"
>  
> +config AS5600
> +	tristate "ams AS5600 magnetic rotary position sensor"
> +	depends on I2C && RUST
> +	help
> +	  Say Y here to build support for the ams AS5600 12-bit
> +	  magnetic rotary position sensor with IIO channel support
> +	  (in_angl_raw and in_angl_scale).
> +
> +	  This is a Rust driver that exposes the 12-bit raw angle
> +	  and radian scale via the IIO subsystem.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called as5600.
> +
>  config IQS624_POS
>  	tristate "Azoteq IQS624/625 angular position sensors"
>  	depends on MFD_IQS62X || COMPILE_TEST
> diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
> index d70902f2979d..2d26f6d6ace3 100644
> --- a/drivers/iio/position/Makefile
> +++ b/drivers/iio/position/Makefile
> @@ -4,5 +4,6 @@
>  
>  # When adding new entries keep the list in alphabetical order
>  
> +obj-$(CONFIG_AS5600) += as5600.o
>  obj-$(CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE) += hid-sensor-custom-intel-hinge.o
>  obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o