From: Alexandre Courbot <acourbot@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alice Ryhl <aliceryhl@google.com>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Benno Lossin <lossin@kernel.org>, Gary Guo <gary@garyguo.net>
Cc: nova-gpu@lists.linux.dev, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org,
Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH 2/4] gpu: nova-core: move GPU static information acquisition to a GSP method
Date: Tue, 09 Jun 2026 17:04:00 +0900 [thread overview]
Message-ID: <20260609-boot-vram-v1-2-d9382610507a@nvidia.com> (raw)
In-Reply-To: <20260609-boot-vram-v1-0-d9382610507a@nvidia.com>
The GSP static information is useful during regular driver runtime;
however it is currently obtained from `Gsp::boot`, with no elegant way
to pass it back to the caller.
Solve this by moving the code acquiring it to a dedicated method of
`Gsp` that can be called as soon as the `Gsp` is booted. This allows us
to obtain and display the static information from the `Gpu` constructor,
and to store the static information for later use.
Its location at the end of `Gsp::boot` was a bit out-of-place anyway:
technically, the GSP is considered booted after we have received the
`GspInitDone` message, so anything that happens afterwards is not part
of the boot sequence anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/gpu.rs | 16 ++++++++++++++++
drivers/gpu/nova-core/gsp.rs | 15 +++++++++++----
drivers/gpu/nova-core/gsp/boot.rs | 7 -------
3 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 6b3e02c71dee..a0cb36cdeeea 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -23,6 +23,7 @@
fb::SysmemFlush,
gsp::{
self,
+ commands::GetGspStaticInfoReply,
Gsp, //
},
regs,
@@ -290,6 +291,8 @@ pub(crate) struct Gpu<'gpu> {
/// GSP and its resources.
#[pin]
gsp_resources: GspResources<'gpu>,
+ /// Static GPU information as provided by the GSP.
+ gsp_static_info: GetGspStaticInfoReply,
}
#[pinned_drop]
@@ -354,6 +357,19 @@ pub(crate) fn new(
// is properly run in case of failure.
unload_bundle: gsp.boot(pdev, bar, spec.chipset, gsp_falcon, sec2_falcon)?,
}),
+
+ gsp_static_info: {
+ let gsp = &gsp_resources.as_ref().get_ref().gsp;
+
+ // Obtain and display basic GPU information.
+ let info = gsp.get_static_info(bar)?;
+ match info.gpu_name() {
+ Ok(name) => dev_info!(pdev, "GPU name: {}\n", name),
+ Err(e) => dev_warn!(pdev, "GPU name unavailable: {:?}\n", e),
+ }
+
+ info
+ }
})
}
}
diff --git a/drivers/gpu/nova-core/gsp.rs b/drivers/gpu/nova-core/gsp.rs
index 69175ca3315c..875bd0a22ac8 100644
--- a/drivers/gpu/nova-core/gsp.rs
+++ b/drivers/gpu/nova-core/gsp.rs
@@ -31,10 +31,13 @@
};
use crate::{
- gsp::cmdq::Cmdq,
- gsp::fw::{
- GspArgumentsPadded,
- LibosMemoryRegionInitArgument, //
+ driver::Bar0,
+ gsp::{
+ cmdq::Cmdq,
+ fw::{
+ GspArgumentsPadded,
+ LibosMemoryRegionInitArgument, //
+ },
},
num,
};
@@ -185,6 +188,10 @@ pub(crate) fn new(pdev: &pci::Device<device::Bound>) -> impl PinInit<Self, Error
}))
})
}
+
+ pub(crate) fn get_static_info(&self, bar: Bar0<'_>) -> Result<commands::GetGspStaticInfoReply> {
+ self.cmdq.send_command(bar, commands::GetGspStaticInfo)
+ }
}
/// Opaque bundle required to unload the GSP. Created by [`Gsp::boot`], consumed by [`Gsp::unload`].
diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index 8afb62d689cb..2eef4d1b058d 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -153,13 +153,6 @@ pub(crate) fn boot(
// Wait until GSP is fully initialized.
commands::wait_gsp_init_done(&self.cmdq)?;
- // Obtain and display basic GPU information.
- let info = self.cmdq.send_command(bar, commands::GetGspStaticInfo)?;
- match info.gpu_name() {
- Ok(name) => dev_info!(pdev, "GPU name: {}\n", name),
- Err(e) => dev_warn!(pdev, "GPU name unavailable: {:?}\n", e),
- }
-
Ok(unload_guard.dismiss())
}
--
2.54.0
next prev parent reply other threads:[~2026-06-09 8:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-09 8:03 [PATCH 0/4] gpu: nova-core: obtain and display VRAM amount Alexandre Courbot
2026-06-09 8:03 ` [PATCH 1/4] gpu: nova-core: move GSP unload state to a pinned Gpu subobject Alexandre Courbot
2026-06-10 3:52 ` Eliot Courtney
2026-06-10 11:18 ` Alexandre Courbot
2026-06-10 10:14 ` Gary Guo
2026-06-09 8:04 ` Alexandre Courbot [this message]
2026-06-10 3:39 ` [PATCH 2/4] gpu: nova-core: move GPU static information acquisition to a GSP method Eliot Courtney
2026-06-10 10:16 ` Gary Guo
2026-06-09 8:04 ` [PATCH 3/4] gpu: nova-core: gsp: Extract usable FB region from GSP Alexandre Courbot
2026-06-10 3:35 ` Eliot Courtney
2026-06-10 10:23 ` Gary Guo
2026-06-10 10:27 ` Gary Guo
2026-06-10 15:38 ` Timur Tabi
2026-06-09 8:04 ` [PATCH 4/4] gpu: nova-core: gsp: Expose total physical VRAM end from FB region info Alexandre Courbot
2026-06-10 3:37 ` Eliot Courtney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260609-boot-vram-v1-2-d9382610507a@nvidia.com \
--to=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=aliceryhl@google.com \
--cc=dakr@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gary@garyguo.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=nova-gpu@lists.linux.dev \
--cc=rust-for-linux@vger.kernel.org \
--cc=simona@ffwll.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox