Rust for Linux List
 help / color / mirror / Atom feed
From: "Onur Özkan" <work@onurozkan.dev>
To: Gary Guo <gary@kernel.org>
Cc: "Danilo Krummrich" <dakr@kernel.org>,
	"Alexandre Courbot" <acourbot@nvidia.com>,
	"Alice Ryhl" <aliceryhl@google.com>,
	"David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Miguel Ojeda" <ojeda@kernel.org>,
	"Boqun Feng" <boqun@kernel.org>, "Gary Guo" <gary@garyguo.net>,
	"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
	"Benno Lossin" <lossin@kernel.org>,
	"Andreas Hindborg" <a.hindborg@kernel.org>,
	"Trevor Gross" <tmgross@umich.edu>,
	nova-gpu@lists.linux.dev, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org,
	"Onur Özkan" <work@onurozkan.dev>
Subject: Re: [PATCH] gpu: nova-core: remove `#[allow(non_snake_case)]`
Date: Fri, 12 Jun 2026 21:46:25 +0300	[thread overview]
Message-ID: <20260612184626.291171-1-work@onurozkan.dev> (raw)
In-Reply-To: <20260612123401.2684025-1-gary@kernel.org>

On Fri, 12 Jun 2026 13:34:00 +0100
Gary Guo <gary@kernel.org> wrote:

> From: Gary Guo <gary@garyguo.net>
> 
> Since commit 5423ef9d4db8 ("rust: pin-init: internal: suppress
> `non_snake_case` lint in `[pin_]init!`"), mere use of the non-snake-case
> identifiers would not cause the warning to be generated. Thus remove these
> allows.
> 
> Signed-off-by: Gary Guo <gary@garyguo.net>
> ---
> This should be applied after the merge window when v7.2-rc1 is backmerged
> to drm-rust-next tree, so the pin-init changes are picked up.
> ---
>  drivers/gpu/nova-core/gsp/fw.rs          | 8 --------
>  drivers/gpu/nova-core/gsp/fw/commands.rs | 2 --
>  2 files changed, 10 deletions(-)
> 
> diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs
> index 4db0cfa4dc4d..d96ea0b216b4 100644
> --- a/drivers/gpu/nova-core/gsp/fw.rs
> +++ b/drivers/gpu/nova-core/gsp/fw.rs
> @@ -219,7 +219,6 @@ pub(crate) fn new<'a>(
>          gsp_firmware: &'a GspFirmware,
>          fb_layout: &'a FbLayout,
>      ) -> impl Init<Self> + 'a {
> -        #[allow(non_snake_case)]
>          let init_inner = init!(bindings::GspFwWprMeta {
>              // CAST: we want to store the bits of `GSP_FW_WPR_META_MAGIC` unmodified.
>              magic: bindings::GSP_FW_WPR_META_MAGIC as u64,
> @@ -674,7 +673,6 @@ fn id8(name: &str) -> u64 {
>              u64::from_ne_bytes(bytes)
>          }
>  
> -        #[allow(non_snake_case)]
>          let init_inner = init!(bindings::LibosMemoryRegionInitArgument {
>              id8: id8(name),
>              pa: obj.dma_handle(),
> @@ -793,7 +791,6 @@ impl GspMsgElement {
>      /// * `sequence` - Sequence number of the message.
>      /// * `cmd_size` - Size of the command (not including the message element), in bytes.
>      /// * `function` - Function of the message.
> -    #[allow(non_snake_case)]
>      pub(crate) fn init(
>          sequence: u32,
>          cmd_size: usize,
> @@ -876,7 +873,6 @@ pub(crate) struct GspArgumentsCached {
>  impl GspArgumentsCached {
>      /// Creates the arguments for starting the GSP up using `cmdq` as its command queue.
>      pub(crate) fn new(cmdq: &Cmdq) -> impl Init<Self> + '_ {
> -        #[allow(non_snake_case)]
>          let init_inner = init!(bindings::GSP_ARGUMENTS_CACHED {
>              messageQueueInitArguments <- MessageQueueInitArguments::new(cmdq),
>              bDmemStack: 1,
> @@ -923,7 +919,6 @@ unsafe impl FromBytes for GspArgumentsPadded {}
>  
>  impl MessageQueueInitArguments {
>      /// Creates a new init arguments structure for `cmdq`.
> -    #[allow(non_snake_case)]
>      fn new(cmdq: &Cmdq) -> impl Init<Self> + '_ {
>          init!(MessageQueueInitArguments {
>              sharedMemPhysAddr: cmdq.dma_handle,
> @@ -947,7 +942,6 @@ pub(crate) enum GspDmaTarget {
>  
>  impl GspAcrBootGspRmParams {
>      fn new(target: GspDmaTarget, wpr_meta_addr: u64) -> impl Init<Self> {
> -        #[allow(non_snake_case)]
>          let params = init!(Self {
>              target: target as u32,
>              gspRmDescSize: num::usize_into_u32::<{ size_of::<GspFwWprMeta>() }>(),
> @@ -966,7 +960,6 @@ fn new(target: GspDmaTarget, wpr_meta_addr: u64) -> impl Init<Self> {
>  
>  impl GspRmParams {
>      fn new(target: GspDmaTarget, libos_addr: u64) -> impl Init<Self> {
> -        #[allow(non_snake_case)]
>          let params = init!(Self {
>              target: target as u32,
>              bootArgsOffset: libos_addr,
> @@ -986,7 +979,6 @@ unsafe impl FromBytes for GspFmcBootParams {}
>  
>  impl GspFmcBootParams {
>      pub(crate) fn new(wpr_meta_addr: u64, libos_addr: u64) -> impl Init<Self> {
> -        #[allow(non_snake_case)]
>          let init = init!(Self {
>              // Blackwell FSP obtains WPR info from other sources, so
>              // wprCarveoutOffset and wprCarveoutSize are left zero.
> diff --git a/drivers/gpu/nova-core/gsp/fw/commands.rs b/drivers/gpu/nova-core/gsp/fw/commands.rs
> index 7bcc41fc7fa0..6c31d825b746 100644
> --- a/drivers/gpu/nova-core/gsp/fw/commands.rs
> +++ b/drivers/gpu/nova-core/gsp/fw/commands.rs
> @@ -27,7 +27,6 @@ pub(crate) struct GspSetSystemInfo {
>  
>  impl GspSetSystemInfo {
>      /// Returns an in-place initializer for the `GspSetSystemInfo` command.
> -    #[allow(non_snake_case)]
>      pub(crate) fn init<'a>(
>          dev: &'a pci::Device<device::Bound>,
>          chipset: Chipset,
> @@ -99,7 +98,6 @@ pub(crate) struct PackedRegistryTable {
>  }
>  
>  impl PackedRegistryTable {
> -    #[allow(non_snake_case)]
>      pub(crate) fn init(num_entries: u32, size: u32) -> impl Init<Self> {
>          type InnerPackedRegistryTable = bindings::PACKED_REGISTRY_TABLE;
>          let init_inner = init!(InnerPackedRegistryTable {
> 
> base-commit: 614f7220e548a8df6262887c0140d9267841dbc1
> -- 
> 2.54.0
> 

Reviewed-by: Onur Özkan <work@onurozkan.dev>

  reply	other threads:[~2026-06-12 18:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-12 12:34 [PATCH] gpu: nova-core: remove `#[allow(non_snake_case)]` Gary Guo
2026-06-12 18:46 ` Onur Özkan [this message]
2026-06-12 20:20 ` Danilo Krummrich
2026-06-12 23:28 ` Alexandre Courbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260612184626.291171-1-work@onurozkan.dev \
    --to=work@onurozkan.dev \
    --cc=a.hindborg@kernel.org \
    --cc=acourbot@nvidia.com \
    --cc=airlied@gmail.com \
    --cc=aliceryhl@google.com \
    --cc=bjorn3_gh@protonmail.com \
    --cc=boqun@kernel.org \
    --cc=dakr@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gary@garyguo.net \
    --cc=gary@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lossin@kernel.org \
    --cc=nova-gpu@lists.linux.dev \
    --cc=ojeda@kernel.org \
    --cc=rust-for-linux@vger.kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tmgross@umich.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox