From: Alexandre Courbot <acourbot@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alice Ryhl <aliceryhl@google.com>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>, Gary Guo <gary@garyguo.net>
Cc: John Hubbard <jhubbard@nvidia.com>,
Alistair Popple <apopple@nvidia.com>,
Timur Tabi <ttabi@nvidia.com>,
Eliot Courtney <ecourtney@nvidia.com>,
Zhi Wang <zhiw@nvidia.com>,
nova-gpu@lists.linux.dev, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org,
Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH 3/6] gpu: nova-core: gsp: move boot code into local closure
Date: Fri, 19 Jun 2026 22:42:18 +0900 [thread overview]
Message-ID: <20260619-nova-bootcontext-v1-3-45193cd0a2e5@nvidia.com> (raw)
In-Reply-To: <20260619-nova-bootcontext-v1-0-45193cd0a2e5@nvidia.com>
The next patch aims at replacing the cumbersome `BootUnloadGuard` with a
more local and less intrusive mechanism to run the GSP unload sequence
upon GSP boot failure. Doing so requires running the boot code in a
local closure, which changes its indentation and would make other
changes difficult to track in the diff. Thus, this preparatory patch
moves said boot code into a local closure that is run upon construction,
so the next patch does not need to re-indent code that changes.
This is a mechanical preparatory patch to make the next patch easier to
read. No functional change intended.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
drivers/gpu/nova-core/gsp/boot.rs | 42 ++++++++-------
drivers/gpu/nova-core/gsp/hal/gh100.rs | 40 +++++++-------
drivers/gpu/nova-core/gsp/hal/tu102.rs | 96 ++++++++++++++++++----------------
3 files changed, 96 insertions(+), 82 deletions(-)
diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index bb2000b7a78b..9eccfd634b61 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -119,30 +119,36 @@ pub(crate) fn boot(
// Perform the chipset-specific boot sequence, and retrieve the unload bundle.
let unload_guard = hal.boot(&self, &ctx, &fb_layout, &wpr_meta)?;
+ // Run from a closure so we can retrieve the result, and run the unload sequence of the GSP
+ // in case of error.
+ let res = (|| {
+ gsp_falcon.write_os_version(bar, gsp_fw.bootloader.app_version);
- gsp_falcon.write_os_version(bar, gsp_fw.bootloader.app_version);
+ // Poll for RISC-V to become active before continuing.
+ read_poll_timeout(
+ || Ok(gsp_falcon.is_riscv_active(bar)),
+ |val: &bool| *val,
+ Delta::from_millis(10),
+ Delta::from_secs(5),
+ )?;
- // Poll for RISC-V to become active before continuing.
- read_poll_timeout(
- || Ok(gsp_falcon.is_riscv_active(bar)),
- |val: &bool| *val,
- Delta::from_millis(10),
- Delta::from_secs(5),
- )?;
+ dev_dbg!(pdev, "RISC-V active? {}\n", gsp_falcon.is_riscv_active(bar),);
- dev_dbg!(pdev, "RISC-V active? {}\n", gsp_falcon.is_riscv_active(bar),);
+ self.cmdq
+ .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev, chipset))?;
+ self.cmdq
+ .send_command_no_wait(bar, commands::SetRegistry::new())?;
- self.cmdq
- .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev, chipset))?;
- self.cmdq
- .send_command_no_wait(bar, commands::SetRegistry::new())?;
+ hal.post_boot(&self, &ctx, &gsp_fw)?;
- hal.post_boot(&self, &ctx, &gsp_fw)?;
+ // Wait until GSP is fully initialized.
+ commands::wait_gsp_init_done(&self.cmdq)
+ })();
- // Wait until GSP is fully initialized.
- commands::wait_gsp_init_done(&self.cmdq)?;
-
- Ok(unload_guard.dismiss())
+ match res {
+ Err(e) => Err(e),
+ Ok(()) => Ok(unload_guard.dismiss()),
+ }
}
/// Shut down the GSP and wait until it is offline.
diff --git a/drivers/gpu/nova-core/gsp/hal/gh100.rs b/drivers/gpu/nova-core/gsp/hal/gh100.rs
index c9fdc8cacedc..46e03f34bc74 100644
--- a/drivers/gpu/nova-core/gsp/hal/gh100.rs
+++ b/drivers/gpu/nova-core/gsp/hal/gh100.rs
@@ -162,31 +162,35 @@ fn boot<'a>(
let gsp_falcon = ctx.gsp_falcon;
let sec2_falcon = ctx.sec2_falcon;
- let fsp_fw = FspFirmware::new(dev, chipset, FIRMWARE_VERSION)?;
+ let res = (|| {
+ let fsp_fw = FspFirmware::new(dev, chipset, FIRMWARE_VERSION)?;
- let unload_bundle = crate::gsp::UnloadBundle(
- KBox::new(FspUnloadBundle, GFP_KERNEL)? as KBox<dyn UnloadBundle>
- );
+ let unload_bundle = crate::gsp::UnloadBundle(
+ KBox::new(FspUnloadBundle, GFP_KERNEL)? as KBox<dyn UnloadBundle>
+ );
- // Wrap the unload bundle into a drop guard so it is automatically run upon failure.
- let unload_guard =
- BootUnloadGuard::new(gsp, dev, bar, gsp_falcon, sec2_falcon, Some(unload_bundle));
+ // Wrap the unload bundle into a drop guard so it is automatically run upon failure.
+ let unload_guard =
+ BootUnloadGuard::new(gsp, dev, bar, gsp_falcon, sec2_falcon, Some(unload_bundle));
- let mut fsp = Fsp::wait_secure_boot(dev, bar, chipset, fsp_fw)?;
+ let mut fsp = Fsp::wait_secure_boot(dev, bar, chipset, fsp_fw)?;
- let args = FmcBootArgs::new(
- dev,
- chipset,
- wpr_meta.dma_handle(),
- gsp.libos.dma_handle(),
- false,
- )?;
+ let args = FmcBootArgs::new(
+ dev,
+ chipset,
+ wpr_meta.dma_handle(),
+ gsp.libos.dma_handle(),
+ false,
+ )?;
- fsp.boot_fmc(dev, bar, fb_layout, &args)?;
+ fsp.boot_fmc(dev, bar, fb_layout, &args)?;
- wait_for_gsp_lockdown_release(dev, bar, gsp_falcon, args.boot_params_dma_handle())?;
+ wait_for_gsp_lockdown_release(dev, bar, gsp_falcon, args.boot_params_dma_handle())?;
- Ok(unload_guard)
+ Ok(unload_guard)
+ })();
+
+ res
}
}
diff --git a/drivers/gpu/nova-core/gsp/hal/tu102.rs b/drivers/gpu/nova-core/gsp/hal/tu102.rs
index 6ed4ee268086..9b24361f924b 100644
--- a/drivers/gpu/nova-core/gsp/hal/tu102.rs
+++ b/drivers/gpu/nova-core/gsp/hal/tu102.rs
@@ -277,59 +277,63 @@ fn boot<'a>(
let gsp_falcon = ctx.gsp_falcon;
let sec2_falcon = ctx.sec2_falcon;
- let bios = Vbios::new(dev, bar)?;
+ let res = (|| {
+ let bios = Vbios::new(dev, bar)?;
- // Try and prepare the unload bundle.
- //
- // If the unload bundle creation fails, the GPU will need to be reset before the driver can
- // be probed again.
- let unload_bundle =
- Sec2UnloadBundle::build(dev, bar, chipset, &bios, gsp_falcon, sec2_falcon)
- .inspect_err(|e| {
- dev_warn!(dev, "Failed to prepare unload firmware: {:?}\n", e);
- dev_warn!(dev, "The GSP won't be able to unload properly on unbind.\n");
- dev_warn!(
- dev,
- "The GPU will need to be reset before the driver can bind again.\n"
- );
- })
- .ok()
- .map(crate::gsp::UnloadBundle);
+ // Try and prepare the unload bundle.
+ //
+ // If the unload bundle creation fails, the GPU will need to be reset before the driver
+ // can be probed again.
+ let unload_bundle =
+ Sec2UnloadBundle::build(dev, bar, chipset, &bios, gsp_falcon, sec2_falcon)
+ .inspect_err(|e| {
+ dev_warn!(dev, "Failed to prepare unload firmware: {:?}\n", e);
+ dev_warn!(dev, "The GSP won't be able to unload properly on unbind.\n");
+ dev_warn!(
+ dev,
+ "The GPU will need to be reset before the driver can bind again.\n"
+ );
+ })
+ .ok()
+ .map(crate::gsp::UnloadBundle);
- // Wrap the unload bundle into a drop guard so it is automatically run upon failure.
- let unload_guard =
- BootUnloadGuard::new(gsp, dev, bar, gsp_falcon, sec2_falcon, unload_bundle);
+ // Wrap the unload bundle into a drop guard so it is automatically run upon failure.
+ let unload_guard =
+ BootUnloadGuard::new(gsp, dev, bar, gsp_falcon, sec2_falcon, unload_bundle);
- // FWSEC-FRTS is not executed on chips where the FRTS region size is 0 (e.g. GA100).
- if !fb_layout.frts.is_empty() {
- run_fwsec_frts(dev, chipset, gsp_falcon, bar, &bios, fb_layout)?;
- }
+ // FWSEC-FRTS is not executed on chips where the FRTS region size is 0 (e.g. GA100).
+ if !fb_layout.frts.is_empty() {
+ run_fwsec_frts(dev, chipset, gsp_falcon, bar, &bios, fb_layout)?;
+ }
- gsp_falcon.reset(bar)?;
- let libos_handle = gsp.libos.dma_handle();
- let (mbox0, mbox1) = gsp_falcon.boot(
- bar,
- Some(libos_handle as u32),
- Some((libos_handle >> 32) as u32),
- )?;
- dev_dbg!(dev, "GSP MBOX0: {:#x}, MBOX1: {:#x}\n", mbox0, mbox1);
+ gsp_falcon.reset(bar)?;
+ let libos_handle = gsp.libos.dma_handle();
+ let (mbox0, mbox1) = gsp_falcon.boot(
+ bar,
+ Some(libos_handle as u32),
+ Some((libos_handle >> 32) as u32),
+ )?;
+ dev_dbg!(dev, "GSP MBOX0: {:#x}, MBOX1: {:#x}\n", mbox0, mbox1);
- dev_dbg!(
- dev,
- "Using SEC2 to load and run the booter_load firmware...\n"
- );
+ dev_dbg!(
+ dev,
+ "Using SEC2 to load and run the booter_load firmware...\n"
+ );
- BooterFirmware::new(
- dev,
- BooterKind::Loader,
- chipset,
- FIRMWARE_VERSION,
- sec2_falcon,
- bar,
- )?
- .run(dev, bar, sec2_falcon, wpr_meta)?;
+ BooterFirmware::new(
+ dev,
+ BooterKind::Loader,
+ chipset,
+ FIRMWARE_VERSION,
+ sec2_falcon,
+ bar,
+ )?
+ .run(dev, bar, sec2_falcon, wpr_meta)?;
- Ok(unload_guard)
+ Ok(unload_guard)
+ })();
+
+ res
}
fn post_boot(&self, gsp: &Gsp, ctx: &GspBootContext<'_>, gsp_fw: &GspFirmware) -> Result {
--
2.54.0
next prev parent reply other threads:[~2026-06-19 13:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-19 13:42 [PATCH 0/6] gpu: nova-core: consolidate and streamline GSP boot process Alexandre Courbot
2026-06-19 13:42 ` [PATCH 1/6] gpu: nova-core: gsp: sequencer: use GspBootContext Alexandre Courbot
2026-06-19 13:42 ` [PATCH 2/6] gpu: nova-core: gsp: sequencer: do not store sequence into GspSequencer Alexandre Courbot
2026-06-19 13:42 ` Alexandre Courbot [this message]
2026-06-19 13:42 ` [PATCH 4/6] gpu: nova-core: gsp: replace BootUnloadGuard with local handler Alexandre Courbot
2026-06-19 13:42 ` [PATCH 5/6] gpu: nova-core: gsp: move unload bundle error handling to Gsp::boot Alexandre Courbot
2026-06-19 13:42 ` [PATCH 6/6] gpu: nova-core: gsp: make unload take GspBootContext Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260619-nova-bootcontext-v1-3-45193cd0a2e5@nvidia.com \
--to=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=dakr@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=ecourtney@nvidia.com \
--cc=gary@garyguo.net \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nova-gpu@lists.linux.dev \
--cc=rust-for-linux@vger.kernel.org \
--cc=simona@ffwll.ch \
--cc=ttabi@nvidia.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox