From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=52.101.61.12 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1792490951; b=1qpZAWqsQbf2u+a9/1q4YboL0AVt7pwONuYOa/671xW+ZAkmRsddnq3YnLb4XG+RGcdb 4v4MjTx1AFPeeRAHsvT2NZn1ZbF8uLo2lWF0jRL2cPTucQM8ScFvdGZQgopVaCydtfuUH 6p2+8Z/EnajOZNrWPn/40D7eFdba64p+qE+3kSABZjf8Jm0evMGYVuwpEg98gjYw03Kd8 cjL1zqqSw8x2/xmBS/x30DBUlod9QfhwCxzu78gLqZj93gOnFQraKRLiUlD5zR4f0MD1/ dQmcKZH2FpWXp572BXVIINuj7mBzIflXa1Xq+N0QAJIk00Gti4ascGiP9vBAkZXPGUw== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1792490951; h=DMARC-Filter:DKIM-Signature:Received:Received:From:Date:Subject: Content-Type:Content-Transfer-Encoding:Message-Id:References: In-Reply-To:To:Cc:X-Mailer:X-ClientProxiedBy:MIME-Version: X-MS-PublicTrafficType:X-MS-TrafficTypeDiagnostic: X-MS-Office365-Filtering-Correlation-Id:X-MS-Exchange-SenderADCheck: X-MS-Exchange-AntiSpam-Relay:X-Microsoft-Antispam: X-Microsoft-Antispam-Message-Info:X-Forefront-Antispam-Report: X-MS-Exchange-AntiSpam-MessageData-ChunkCount: X-MS-Exchange-AntiSpam-MessageData-0: X-MS-Exchange-AntiSpam-MessageData-1:X-OriginatorOrg: X-MS-Exchange-CrossTenant-Network-Message-Id: X-MS-Exchange-CrossTenant-AuthSource:X-MS-Exchange-CrossTenant-AuthAs: X-MS-Exchange-CrossTenant-OriginalArrivalTime: X-MS-Exchange-CrossTenant-FromEntityHeader: X-MS-Exchange-CrossTenant-Id:X-MS-Exchange-CrossTenant-MailboxType: X-MS-Exchange-CrossTenant-UserPrincipalName: X-MS-Exchange-Transport-CrossTenantHeadersStamped; bh=ylL8bb5PKKrFVqlYMoRMp4V/h7Xt1iFQVSccb595qgk=; b=PYsPZxb+JqTz2ufxE7Uwzy6Y1AyBJN3wpL7pcZiX6EgCEXqGDpAwBicKJGfWjEFcNaiZ NqIC7DhTvTM9sGntRm+/dQUi8/if777QPMXku2z3ea79wc6Xm5ulqGvhzjKrPg8ns3eli JOjVu9djnPPxFrdHBJMh+aq66cZcuBxzFyzvXHAsKV9/+7v/opSAaHsB/CSOhRf+Ygtzw ZO3nMeNucJdZp5gEn+4ayBS+th1fcK+vCirt85E0w0QhTJIwglsWP11sO1gdu5gPS/711 /cIRTJYhRPQRckQWvo8+jeSHwbzC+T5klbJkkb0gXhwakuEmVGyFM/9ZpRCqbXHyK7w== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass header.from=nvidia.com; spf=fail smtp.mailfrom=nvidia.com; dkim=pass header.d=Nvidia.com header.i=@Nvidia.com header.a=rsa-sha256 header.s=selector2 header.b=SJuGIK6k; arc=pass header.oldest-pass=0 smtp.remote-ip=52.101.61.12 Received: from DM1PR04CU001.outbound.protection.outlook.com (mail-centralusazon11010012.outbound.protection.outlook.com [52.101.61.12]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (secp384r1) server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2ED2960A260F; Tue, 20 Oct 2026 10:09:10 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 2ED2960A260F Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=nvidia.com Authentication-Results: smtp.subspace.kernel.org; spf=fail smtp.mailfrom=nvidia.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=Nvidia.com header.i=@Nvidia.com header.a=rsa-sha256 header.s=selector2 header.b=SJuGIK6k ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=QdkUEIQ1I6gZrioL2KoIbZHnQ+as5PY5O9KEJ0syKiUX/oLaqe9ojYKh4Z2ipA8WxvC4G2IcBOh64yoboOSWI8hBdy1jIO4Jun1fIbRmyXkUAKf+l0XhERDOZ3JUqwo04G+64AVfGrkTTBkwM2XC6ph1yeKbuolbXi/HlwepoDkioRvS4M2vqc0sUeL1fGc6Z/jLZ3XzLbD8H6Oar6bIGDWxoH2LLqcmwjyHN5LgE/ipu5H5PilZOVG9p5UDA8etJDVrNoLQF1MSeI0bpATPzsnOQqj2+63NkrxzYc405fuxttNBq5tKaXXNcFHUd0oDouxy1P4X6ZUBjk7Lrphoqw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=ylL8bb5PKKrFVqlYMoRMp4V/h7Xt1iFQVSccb595qgk=; b=uOLyCCSNe8OfNI8ep3T6n3Fy/96zIurIWJoOgwBiOM7aXLpxU7WZTYIzahXG5GpH36Jm+LgoNaV4KTYeuHayJnhkLiTo216K5TGhkFh8bVgJ4fa8X1QlaNbiFFbyhDPf7HAWQMWQMHIs+Oef+9ZoTfiJDjiSogtTjRoADkSg6LhdiSZLi7Hx1gI4gM9fR0mh5uH8LY3g0bfKumWe22n8FHfmeznqm/VfGypO/IprczNREUKsrrJ5F6OPEbpNAT2vHcPXLaUFHWbaQmTo+9Jr2LbTIiPggGyukzEUPI8TH0pRGstgbD18L1j2O44Lu886DaJAp/sDkiYtne5KBvkxtw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nvidia.com; dmarc=pass action=none header.from=nvidia.com; dkim=pass header.d=nvidia.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=Nvidia.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=ylL8bb5PKKrFVqlYMoRMp4V/h7Xt1iFQVSccb595qgk=; b=SJuGIK6kZUmuSqaHp1aC7ht0232UE1pfbYpu+VZBOkVf4l9stub9yloY3Smh3C7Ws4ZNV40hFpH2VuzAHQNag0U/T28tdCWPD9Q3X4H64mqqmrJo9brFUh8dEWNNWreYtpym0ppBU5EmnIfFTTlEEm1qYRnMe8wQdVdrCW7J6BftF1xMcMURMKhXeuNBjFSHAwCNi0KA5kMMw13Z+70I5E8L9NfcwXYmfmMxkpRZJ8K6rPAezgR/xS4N+88xkWuFlpUycrx3Z+YNztK/STMbjCLNCoqgCbQJxCcNRsJpTenfYs/hDV8z3KRLNBhoQTQHMFuAz8KUWPoxe/pPxoQJcg== Authentication-Results: mx.microsoft.com 1; dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nvidia.com; Received: from MW4PR12MB6873.namprd12.prod.outlook.com (2603:10b6:303:20c::17) by SN7PR12MB6862.namprd12.prod.outlook.com (2603:10b6:806:265::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.522.19; Tue, 20 Oct 2026 10:09:06 +0000 Received: from MW4PR12MB6873.namprd12.prod.outlook.com ([fe80::a338:bd2c:3a38:ece1]) by MW4PR12MB6873.namprd12.prod.outlook.com ([fe80::a338:bd2c:3a38:ece1%5]) with mapi id 15.21.0546.012; Tue, 20 Oct 2026 10:09:06 +0000 From: Alexandre Courbot Date: Tue, 20 Oct 2026 19:08:33 +0900 Subject: [PATCH v5 12/14] gpu: nova-core: gsp: cmdq: move the RPC code into a sub-module Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20261020-cmdq-rpc-v5-12-dceeb8f360ec@nvidia.com> References: <20261020-cmdq-rpc-v5-0-dceeb8f360ec@nvidia.com> In-Reply-To: <20261020-cmdq-rpc-v5-0-dceeb8f360ec@nvidia.com> To: John Hubbard , Danilo Krummrich , Alice Ryhl , David Airlie , Simona Vetter , Benno Lossin , Gary Guo Cc: Alistair Popple , Timur Tabi , Eliot Courtney , Zhi Wang , nova-gpu@lists.linux.dev, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org, Alexandre Courbot X-Mailer: b4 0.15.2 X-ClientProxiedBy: TY6P286CA0035.JPNP286.PROD.OUTLOOK.COM (2603:1096:405:3b7::14) To MW4PR12MB6873.namprd12.prod.outlook.com (2603:10b6:303:20c::17) X-Mailing-List: rust-for-linux@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: MW4PR12MB6873:EE_|SN7PR12MB6862:EE_ X-MS-Office365-Filtering-Correlation-Id: 2c2d8d1f-3034-4191-e1f1-08df2e922cbc X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|366016|7416014|23010399003|376014|10070799003|1800799024|6133799003|18002099003|22082099003|10067099003|3023799007|11063799006|5023799004|261009223027099003|56012099006; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:MW4PR12MB6873.namprd12.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230040)(366016)(7416014)(23010399003)(376014)(10070799003)(1800799024)(6133799003)(18002099003)(22082099003)(10067099003)(3023799007)(11063799006)(5023799004)(261009223027099003)(56012099006);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 2 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?B?WjRkQjIySUJOVmw0RjN6NWp3WmlzMEQ1RndIVVYweW1TUGxDM09IdWQ5cEpl?= =?utf-8?B?WnJxWTh6d0FtWG1tQUgrZEJCVUpvQjREVHZCZ0FzT0hBTzlKSDA1dHhnNjJx?= =?utf-8?B?aUhUaXpZbmk1d1IwbHVpK2xOdngzc1JFZkdid0Nya3NNYUNxYXJINUJBcFlW?= =?utf-8?B?dU1iNVdEeXBwcUNTaWZvd1FpQnBsYUNjajJqY1BvNEpnZ1FQRFIxOEF5bEo1?= =?utf-8?B?K0h4aWJTT3dVd2ovM0UvRENjSFdTOGN2Sk5NdkZRcVVVU1FVelJmaTlhbVpK?= =?utf-8?B?TFJLUG5HajJ0OW4wNFF2dk9sNm9FdVN2a0l6MXhqcGhhajdJTUhTSHgxdi8v?= =?utf-8?B?NEJSUEszYmNoNXpqZGZaWE8wNGRzWFhHT1Q5K3VYSXE5RHM1ZFFVY2xEeEc3?= =?utf-8?B?c3ZaNUlmL0srb1JzRHdoWEpvNGV4cXpBTmhPZnJMMEV2RjAvdFg1WWEzR3Jz?= =?utf-8?B?eFhGTGhaMlQ0UEYrdjRxQXRmUWZMdXZkc2hwMzl2NXhiLytnQ05DQTBkeC9a?= =?utf-8?B?ZlcyM0VBYnpTc25iTEJPN3lPaDJNbE4vODNLMEErYmMvTGNKb004VGNEOHpY?= =?utf-8?B?QzN1bStuWVBISTJodmk2dm0vTzV1VzlrZU9PVzlMaHlVY21lQTIzWUlTLzBI?= =?utf-8?B?V0RVZ0VxQWNKbk1iblRSdDcxQWhkRHA0a2ExclNzR1d4OVBHemV6ZzduME9U?= =?utf-8?B?Ujl5c245bGFDcTV1UlQ5LzRWZDkxLzZyblJreTFoZnFwRkpadFJ0c3VVeC9y?= =?utf-8?B?dE1MN1lwd1YrQ3NRbzhXUDdwNFByVVF1U2RUSDJXbzB1cEN0QnZSeWpVaVlY?= =?utf-8?B?UFNjUDR0YTdnbktxN2pUd0hEN2Fib2l4Rko0NzJJQTlNeW9hVUNzVENISUx4?= =?utf-8?B?V3dhL3VVV0VVbVI0UkdWNUtYd0hFNUU5M1dDT0ZXOURWWFk0TWkvVEJoRWg0?= =?utf-8?B?WHM3dGdGOFZiOVIzYlhMZDk3SU91Yk00N2hqenM0MloyR0tPU0ROM0UzZmpS?= =?utf-8?B?NTdDR05Ccm1UdTJBK21HYXc2WjgyZ3NhYWt3UG1wWlY2amF6bnFiQnVaZlBs?= =?utf-8?B?d1J0WnR0cmVGS1c3VzNDNFM0RVQ5ZmQ4OFB1clJjcHh3eTZBS1hWU0xUcUZ4?= =?utf-8?B?Z0Nsc0htSFNkTXJyZUNYNDh1WVdJRFFiUllzSklyUkNIbUg4SVJWMXRsSHdm?= =?utf-8?B?MzhneHdUcUdRcHlYaHk1dmpWREFQb09FUHRwU0tmS3NlSXdFTVozb2RFNUwy?= =?utf-8?B?R1RUa1dlNi9XbWJSa2ZpeUdDM2g4eEdzZkZiWjJuUDFvNWJmdzlCTmVNRFIw?= =?utf-8?B?TDhDT2ZwVVA5aDlrTzZZcUU1VXVUUmV6eThpR2t3MDFHVUs1YWQyY0VGbWMr?= =?utf-8?B?OGVnZ1IzbTBiUXZWcllySEQ1eGtrdmh0TFpYa0xxd0w5clhWRktqRjV3cFhX?= =?utf-8?B?OStqcDhPcnphVnlHK1pjcjRGbXJTdVB1L2lnbVFxZERWb2RrRGdoRFg3SHQ1?= =?utf-8?B?YlVTQjlFcjN4TFJTaTZhMlovVWl3MlJYM3BSRzhnOW9nbVFiMUIvRTNoTHA1?= =?utf-8?B?VlhOZ0R1VHV3VU5jdE5rcGVndUdnUndqRVRGSXdSRDl4T3VRcVN4UWNXekVj?= =?utf-8?B?aVRSS3o5ZmNzRzhyS0RiWU9lc3lxNGJONGpqRFBsR3ZFVlBtSmlZdTdaUkNi?= =?utf-8?B?QWt3YXVITFdoTTJHR201WU9rdzRSV20rKzNKc2F2WnFaVi8vYmppdnRBTnBK?= =?utf-8?B?TGt2eG5VV1NscStlZnBYcERVTDY0aGpUcG9UZUIxNEs1WlJISjZrZHIrdkIz?= =?utf-8?B?WktFeklQMEpwb3FFSXR3amcrRE1ZRlpocVRvV0hCM20yTzI5NURGUEpSOGdE?= =?utf-8?B?eDA0SWZWY09QRU5LbHBFV3dNTmZOUFBlUjc3VThHbGd2OGlJZ2o5YWoySHVM?= =?utf-8?B?M3paSjcyYjliMzI1UlBmTW1BMXVzZlIzS3Z4L3J4ZFJqTWFMdUhINmYzMDYv?= =?utf-8?B?SEZ6by9mR1IyaWF5ZDBvNDBEVjVuTHB1c21YbjF5dTZ0VWxlaExpNTQ5SjlW?= =?utf-8?B?OTRTWEhOVkhHYmdLWmsrVVFNeVgvZnNNRTlKRkRDSWk2UytvS0hsd2NLNDhP?= =?utf-8?B?RStBOUxSWVUveW5GUkdtUVY4cmw5RVQ1RWpKREpSd0d4V1h5bmp4bVF1Qjhq?= =?utf-8?B?Z1Rkc1FCakFERUdISzBTNnJsSXVET0J3R29nZ055elpZWFd1RWJDSVA5NDZ6?= =?utf-8?B?Qm1RaDBhRzc5MnJrYTJoZzRuTndGb0QrN1BQT0MyRjFsR2NQbFZISE1DMHB3?= =?utf-8?B?UzNmQ1Fuc3Y5N3VYWTRZU1NFcUsrbi9tNWI5SU5tRnZRUkoxV0xJK3lsUWFX?= =?utf-8?Q?awk5VVnJ3quaru+jcuefbqncyDIrCgSTjThQcoS5S0oOH?= X-MS-Exchange-AntiSpam-MessageData-1: 7GMEgook7R4eyA== X-OriginatorOrg: Nvidia.com X-MS-Exchange-CrossTenant-Network-Message-Id: 2c2d8d1f-3034-4191-e1f1-08df2e922cbc X-MS-Exchange-CrossTenant-AuthSource: MW4PR12MB6873.namprd12.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Oct 2026 10:09:06.2743 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 43083d15-7273-40c1-b7db-39efd9ccc17a X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: E0pZPMadKWtgXi91HI7R9hbpopcesF3sqyFngoaF/tJJwmN26sap3+e7VaYFwes5k4fZoSPjjo50NU7+JCToug== X-MS-Exchange-Transport-CrossTenantHeadersStamped: SN7PR12MB6862 Move the types and code related to sending and receiving RPC commands and messages into the `rpc` sub-module. The methods are still declared as members of `CmdqInner` and `Cmdq`; only they are now in their own sub-module. This is a pure move commit, with no functional change intended. Signed-off-by: Alexandre Courbot Reviewed-by: Eliot Courtney --- drivers/gpu/nova-core/gsp/cmdq.rs | 387 +------------------ drivers/gpu/nova-core/gsp/cmdq/rpc.rs | 415 +++++++++++++++++++++ .../nova-core/gsp/cmdq/{ => rpc}/continuation.rs | 0 drivers/gpu/nova-core/gsp/commands.rs | 6 +- drivers/gpu/nova-core/gsp/sequencer.rs | 4 +- 5 files changed, 427 insertions(+), 385 deletions(-) diff --git a/drivers/gpu/nova-core/gsp/cmdq.rs b/drivers/gpu/nova-core/gsp/cmdq.rs index 54e87fd7158c..c5a2f08cda94 100644 --- a/drivers/gpu/nova-core/gsp/cmdq.rs +++ b/drivers/gpu/nova-core/gsp/cmdq.rs @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 +// SPDX-FileCopyrightText: Copyright (c) 2025-2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved. -mod continuation; +pub(super) mod rpc; use core::mem; @@ -28,8 +29,8 @@ }, Mutex, // }, + time::Delta, time::{ - Delta, Instant, Monotonic, // }, @@ -39,8 +40,6 @@ }, }; -use continuation::SplitState; - use pin_init::pin_init_scope; use crate::{ @@ -48,10 +47,8 @@ gsp::{ fw::{ GspMsgElement, - MsgFunction, MsgqRxHeader, MsgqTxHeader, - RpcMessageHeader, GSP_MSG_QUEUE_ELEMENT_SIZE_MAX, // }, PteArray, @@ -81,149 +78,6 @@ trait CommandElement { fn write(&self, dev: &device::Device, seq: u32, dst: &mut GspCommand<'_>) -> Result; } -/// Trait implemented by types representing a command to send to the GSP. -/// -/// The main purpose of this trait is to provide [`Cmdq`] with the information it needs to send -/// a given command. -/// -/// [`CommandToGsp::init`] in particular is responsible for initializing the command directly -/// into the space reserved for it in the command queue buffer. -/// -/// Some commands may be followed by a variable-length payload. For these, the -/// [`CommandToGsp::variable_payload_len`] and [`CommandToGsp::init_variable_payload`] need to be -/// defined as well. -pub(crate) trait CommandToGsp { - /// Function identifying this command to the GSP. - const FUNCTION: MsgFunction; - - /// Type generated by [`CommandToGsp::init`], to be written into the command queue buffer. - type Command: FromBytes + AsBytes; - - /// Type of the reply expected from the GSP, or [`NoReply`] for commands that don't - /// have a reply. - type Reply; - - /// Error type returned by [`CommandToGsp::init`]. - type InitError; - - /// In-place command initializer responsible for filling the command in the command queue - /// buffer. - fn init(&self) -> impl Init; - - /// Size of the variable-length payload following the command structure generated by - /// [`CommandToGsp::init`]. - /// - /// Most commands don't have a variable-length payload, so this is zero by default. - fn variable_payload_len(&self) -> usize { - 0 - } - - /// Method initializing the variable-length payload. - /// - /// The command buffer is circular, which means that we may need to jump back to its beginning - /// while in the middle of a command. For this reason, the variable-length payload is - /// initialized using a [`SBufferIter`]. - /// - /// This method will receive a buffer of the length returned by - /// [`CommandToGsp::variable_payload_len`], and must write every single byte of it. Leaving - /// unwritten space will lead to an error. - /// - /// Most commands don't have a variable-length payload, so this does nothing by default. - fn init_variable_payload( - &self, - _dst: &mut SBufferIter>, - ) -> Result { - Ok(()) - } - - /// Total size of the command (including its variable-length payload) without the - /// [`GspMsgElement`] header. - fn size(&self) -> usize { - size_of::() + self.variable_payload_len() - } -} - -/// Wrapper type for sending a RPC command as a command queue element. -/// -/// [`CommandElement`] cannot be directly implemented for all [`CommandToGsp`] with a blanket -/// implementation as it would conflict with other future command types. -struct RpcCommandElement(M); - -impl CommandElement for RpcCommandElement -where - M: CommandToGsp, - Error: From, -{ - fn size(&self) -> usize { - self.0.size() - } - - fn write(&self, dev: &device::Device, seq: u32, dst: &mut GspCommand<'_>) -> Result { - let command = &self.0; - let size_in_bytes = command.size(); - // Extract area for the command itself. The GSP message header and the command header - // together are guaranteed to fit entirely into a single page, so it's ok to only look - // at `dst.contents.0` here. - let (cmd, payload_1) = M::Command::from_bytes_mut_prefix(dst.contents.0).ok_or(EIO)?; - let rpc_header_init = RpcMessageHeader::init(size_in_bytes, M::FUNCTION); - // SAFETY: `dst.header.rpc_header_mut()` is a valid reference, and is not touched if the - // initializer fails. - unsafe { - pin_init::raw_try_init( - core::ptr::from_mut(dst.header.rpc_header_mut()), - rpc_header_init, - )?; - } - // SAFETY: `cmd` is a valid reference, and is not touched if the initializer fails. - unsafe { - pin_init::raw_try_init(core::ptr::from_mut(cmd), command.init())?; - } - - // Fill the variable-length payload, which may be empty. - let mut sbuffer = SBufferIter::new_writer([&mut payload_1[..], &mut dst.contents.1[..]]); - command.init_variable_payload(&mut sbuffer)?; - - if !sbuffer.is_empty() { - return Err(EIO); - } - - dev_dbg!( - dev, - "GSP RPC: send: seq# {}, function={:?}, length=0x{:x}\n", - seq, - M::FUNCTION, - size_in_bytes, - ); - - Ok(()) - } -} - -/// Trait representing messages received from the GSP. -/// -/// A reply that [`Cmdq::send_command`] waits for, or an event that [`Cmdq::await_msg`] waits for. -/// The receiver matches a message's function code against [`Self::FUNCTION`] and decodes the -/// message with [`Self::read`]. -pub(crate) trait MessageFromGsp: Sized { - /// Function identifying this message from the GSP. - const FUNCTION: MsgFunction; - - /// Error type returned by [`MessageFromGsp::read`]. - type InitError; - - /// Type containing the raw message to be read from the message queue. - type Message: FromBytes; - - /// Method reading the message from the message queue and returning it. - /// - /// From a `Self::Message` and a [`SBufferIter`], constructs an instance of `Self` and returns - /// it. - fn read( - msg: &Self::Message, - sbuffer: &mut SBufferIter>, - ) -> Result; -} - /// Number of GSP pages making the [`Msgq`]. pub(crate) const MSGQ_NUM_PAGES: u32 = 0x3f; @@ -559,96 +413,10 @@ struct GspMessage<'a> { contents: (&'a [u8], &'a [u8]), } -/// A RPC message ready to be processed from the message queue. -struct RpcMessage<'a> { - // Reference to the RPC header of the message. - header: &'a RpcMessageHeader, - // Slices to the contents of the message. The second slice is empty unless the message loops - // over the message queue. - contents: (&'a [u8], &'a [u8]), -} - -impl<'a> RpcMessage<'a> { - /// Validate the RPC layer of `element` and returns its RPC header and its contents trimmed down - /// to the RPC payload. - /// - /// # Errors - /// - /// - `EIO` if the element is shorter than the payload length advertised by the RPC header. - fn parse(dev: &device::Device, element: GspMessage<'a>) -> Result> { - let GspMessage { - header, - contents: (slice_1, slice_2), - } = element; - - let rpc_header = header.rpc_header(); - let payload_length = rpc_header.rpc_length(); - - dev_dbg!( - dev, - "GSP RPC: receive: seq# {}, function={:?}, length=0x{:x}\n", - rpc_header.sequence(), - rpc_header.function(), - payload_length, - ); - - // Check that the driver read area is large enough for the message. - if slice_1.len() + slice_2.len() < payload_length { - return Err(EIO); - } - - // Cut the message slices down to the actual length of the message. - let (slice_1, slice_2) = if slice_1.len() > payload_length { - // PANIC: we checked above that `slice_1` is at least as long as `payload_length`. - (slice_1.split_at(payload_length).0, &slice_2[0..0]) - } else { - ( - slice_1, - // PANIC: we checked above that `slice_1.len() + slice_2.len()` is at least as - // large as `payload_length`. - slice_2.split_at(payload_length - slice_1.len()).0, - ) - }; - - Ok(RpcMessage { - header: rpc_header, - contents: (slice_1, slice_2), - }) - } - - /// Logs an event, meaning a message that no caller was waiting for. - /// - /// An OS error or robust-channel record is logged at error level and an unknown function code - /// at warning level. Other events are not logged. - fn log(&self, dev: &device::Device) { - let function = self.header.function(); - let seq = self.header.sequence(); - - match function { - Ok(MsgFunction::OsErrorLog) => { - dev_err!(dev, "GSP reported an OS error (seq {})\n", seq); - } - Ok(MsgFunction::RcTriggered) => { - dev_err!(dev, "GSP triggered robust-channel recovery (seq {})\n", seq); - } - // Nothing to do for the remaining known function codes. - Ok(_) => {} - Err(raw) => { - dev_warn!( - dev, - "unknown GSP message function {:#x} (seq {})\n", - raw, - seq - ); - } - } - } -} - /// A message whose protocol layer has been parsed and validated. enum GspParsedMessage<'a> { - /// A [RPC message](RpcMessage). - Rpc(RpcMessage<'a>), + /// A [RPC message](rpc::RpcMessage). + Rpc(rpc::RpcMessage<'a>), } impl GspParsedMessage<'_> { @@ -731,73 +499,6 @@ fn notify_gsp(bar: Bar0<'_>) { bar.write_reg(regs::NV_PGSP_QUEUE_HEAD::zeroed().with_address(0u32)); } - /// Sends `command` to the GSP and waits for the reply. - /// - /// Events that arrive before the reply are logged and consumed. - /// - /// The queue is locked for the entire send+receive cycle to ensure that no other command can - /// be interleaved. - /// - /// # Errors - /// - /// - `ETIMEDOUT` if space does not become available to send the command, or if the reply does - /// not arrive within [`Self::RECEIVE_TIMEOUT`] of the send, however many events arrive - /// while waiting. - /// - `EIO` if the variable payload requested by the command has not been entirely - /// written to by its [`CommandToGsp::init_variable_payload`] method. - /// - /// Error codes returned by the command and reply initializers are propagated as-is. - pub(crate) fn send_command(&self, command: M) -> Result - where - M: CommandToGsp, - M::Reply: MessageFromGsp, - Error: From, - Error: From<::InitError>, - { - let mut inner = self.inner.lock(); - inner.send_command(command)?; - - inner.await_msg() - } - - /// Sends `command` to the GSP without waiting for a reply. - /// - /// # Errors - /// - /// - `ETIMEDOUT` if space does not become available within the timeout. - /// - `EIO` if the variable payload requested by the command has not been entirely - /// written to by its [`CommandToGsp::init_variable_payload`] method. - /// - /// Error codes returned by the command initializers are propagated as-is. - pub(crate) fn send_command_no_wait(&self, command: M) -> Result - where - M: CommandToGsp, - Error: From, - { - self.inner.lock().send_command(command) - } - - /// Waits for an unsolicited GSP event of type `M`. Events that arrive before it are logged and - /// consumed. - /// - /// The queue mutex is held for the whole wait, up to [`Self::RECEIVE_TIMEOUT`], so no other - /// caller can send a command or consume an event meanwhile. - /// - /// # Errors - /// - /// - `ETIMEDOUT` if the event does not arrive within [`Self::RECEIVE_TIMEOUT`] of the call, - /// however many other events arrive while waiting. - /// - `EIO` if a message fails framing or checksum validation. - /// - /// Error codes returned by [`MessageFromGsp::read`] are propagated as-is. - pub(crate) fn await_msg(&self) -> Result - where - // This allows all error types, including `Infallible`, to be used for `M::InitError`. - Error: From, - { - self.inner.lock().await_msg() - } - /// Logs and consumes every message the GSP has already posted, and returns without waiting for /// more. /// @@ -871,36 +572,6 @@ fn send_command_element(&mut self, command: E) -> Result { Ok(()) } - /// Sends `command` to the GSP. - /// - /// The command may be split into multiple messages if it is large. - /// - /// # Errors - /// - /// - `ETIMEDOUT` if space does not become available within the timeout. - /// - `EIO` if the variable payload requested by the command has not been entirely - /// written to by its [`CommandToGsp::init_variable_payload`] method. - /// - /// Error codes returned by the command initializers are propagated as-is. - fn send_command(&mut self, command: M) -> Result - where - M: CommandToGsp, - Error: From, - { - match SplitState::new(command)? { - SplitState::Single(command) => self.send_command_element(RpcCommandElement(command)), - SplitState::Split(command, mut continuations) => { - self.send_command_element(RpcCommandElement(command))?; - - while let Some(continuation) = continuations.next() { - self.send_command_element(RpcCommandElement(continuation))?; - } - - Ok(()) - } - } - } - /// Wait for a message to become available on the message queue. /// /// This works purely at the transport layer and does not interpret or validate the message @@ -970,7 +641,7 @@ fn consume_element( })?; // RPC is the only type of message supported for now. - let message = GspParsedMessage::Rpc(RpcMessage::parse(self.dev, message)?); + let message = GspParsedMessage::Rpc(rpc::RpcMessage::parse(self.dev, message)?); let res = f(message); @@ -1010,52 +681,6 @@ fn await_msg_with(&mut self, f: impl Fn(GspParsedMessage<'_>) -> Result) - } } - /// Receives a message of type `M`, waiting up to [`Cmdq::RECEIVE_TIMEOUT`] from the call. - /// - /// Any other message that arrives first is logged as an event and does not extend the - /// deadline. - /// - /// # Errors - /// - /// - `ETIMEDOUT` if no message of type `M` arrives before the deadline, however many other - /// messages arrive while waiting. - /// - `EIO` if a message fails framing or checksum validation. - /// - /// Error codes returned by [`MessageFromGsp::read`] are propagated as-is. - fn await_msg(&mut self) -> Result - where - // This allows all error types, including `Infallible`, to be used for `M::InitError`. - Error: From, - { - let f = |message: GspParsedMessage<'_>| { - let GspParsedMessage::Rpc(rpc_message) = message; - let function = rpc_message.header.function(); - if matches!(function, Ok(f) if f == M::FUNCTION) { - let (cmd, contents_1) = - M::Message::from_bytes_prefix(rpc_message.contents.0).ok_or(EIO)?; - let mut sbuffer = SBufferIter::new_reader([contents_1, rpc_message.contents.1]); - - M::read(cmd, &mut sbuffer) - .map_err(|e| e.into()) - .inspect(|_| { - if !sbuffer.is_empty() { - dev_warn!( - self.dev, - "GSP message {:?} has unprocessed data\n", - M::FUNCTION - ); - } - }) - } else { - rpc_message.log(self.dev); - - Err(ENOMSG) - } - }; - - self.await_msg_with(f) - } - /// Logs and consumes every message the queue holds. /// /// # Errors diff --git a/drivers/gpu/nova-core/gsp/cmdq/rpc.rs b/drivers/gpu/nova-core/gsp/cmdq/rpc.rs new file mode 100644 index 000000000000..13baf4398632 --- /dev/null +++ b/drivers/gpu/nova-core/gsp/cmdq/rpc.rs @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0 +// SPDX-FileCopyrightText: Copyright (c) 2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved. + +//! Support for the RPC message type on the GSP command queue. + +mod continuation; + +use kernel::{ + device, + prelude::*, + transmute::{ + AsBytes, + FromBytes, // + }, +}; + +use continuation::SplitState; + +use crate::{ + gsp::{ + cmdq::{ + GspCommand, + NoReply, // + }, + fw::{ + MsgFunction, + RpcMessageHeader, // + }, + }, + sbuffer::SBufferIter, +}; + +use super::{ + Cmdq, + CmdqInner, + CommandElement, + GspMessage, + GspParsedMessage, // +}; + +/// Trait implemented by types representing a command to send to the GSP. +/// +/// The main purpose of this trait is to provide [`Cmdq`] with the information it needs to send +/// a given command. +/// +/// [`CommandToGsp::init`] in particular is responsible for initializing the command directly +/// into the space reserved for it in the command queue buffer. +/// +/// Some commands may be followed by a variable-length payload. For these, the +/// [`CommandToGsp::variable_payload_len`] and [`CommandToGsp::init_variable_payload`] need to be +/// defined as well. +pub(crate) trait CommandToGsp { + /// Function identifying this command to the GSP. + const FUNCTION: MsgFunction; + + /// Type generated by [`CommandToGsp::init`], to be written into the command queue buffer. + type Command: FromBytes + AsBytes; + + /// Type of the reply expected from the GSP, or [`NoReply`] for commands that don't + /// have a reply. + type Reply; + + /// Error type returned by [`CommandToGsp::init`]. + type InitError; + + /// In-place command initializer responsible for filling the command in the command queue + /// buffer. + fn init(&self) -> impl Init; + + /// Size of the variable-length payload following the command structure generated by + /// [`CommandToGsp::init`]. + /// + /// Most commands don't have a variable-length payload, so this is zero by default. + fn variable_payload_len(&self) -> usize { + 0 + } + + /// Method initializing the variable-length payload. + /// + /// The command buffer is circular, which means that we may need to jump back to its beginning + /// while in the middle of a command. For this reason, the variable-length payload is + /// initialized using a [`SBufferIter`]. + /// + /// This method will receive a buffer of the length returned by + /// [`CommandToGsp::variable_payload_len`], and must write every single byte of it. Leaving + /// unwritten space will lead to an error. + /// + /// Most commands don't have a variable-length payload, so this does nothing by default. + fn init_variable_payload( + &self, + _dst: &mut SBufferIter>, + ) -> Result { + Ok(()) + } + + /// Total size of the command (including its variable-length payload) without the + /// [`GspMsgElement`] header. + fn size(&self) -> usize { + size_of::() + self.variable_payload_len() + } +} + +/// Wrapper type for sending a RPC command as a command queue element. +/// +/// [`CommandElement`] cannot be directly implemented for all [`CommandToGsp`] with a blanket +/// implementation as it would conflict with other future command types. +struct RpcCommandElement(M); + +impl CommandElement for RpcCommandElement +where + M: CommandToGsp, + Error: From, +{ + fn size(&self) -> usize { + self.0.size() + } + + fn write(&self, dev: &device::Device, seq: u32, dst: &mut GspCommand<'_>) -> Result { + let command = &self.0; + let size_in_bytes = command.size(); + // Extract area for the command itself. The GSP message header and the command header + // together are guaranteed to fit entirely into a single page, so it's ok to only look + // at `dst.contents.0` here. + let (cmd, payload_1) = M::Command::from_bytes_mut_prefix(dst.contents.0).ok_or(EIO)?; + let rpc_header_init = RpcMessageHeader::init(size_in_bytes, M::FUNCTION); + // SAFETY: `dst.header.rpc_header_mut()` is a valid reference, and is not touched if the + // initializer fails. + unsafe { + pin_init::raw_try_init( + core::ptr::from_mut(dst.header.rpc_header_mut()), + rpc_header_init, + )?; + } + // SAFETY: `cmd` is a valid reference, and is not touched if the initializer fails. + unsafe { + pin_init::raw_try_init(core::ptr::from_mut(cmd), command.init())?; + } + + // Fill the variable-length payload, which may be empty. + let mut sbuffer = SBufferIter::new_writer([&mut payload_1[..], &mut dst.contents.1[..]]); + command.init_variable_payload(&mut sbuffer)?; + + if !sbuffer.is_empty() { + return Err(EIO); + } + + dev_dbg!( + dev, + "GSP RPC: send: seq# {}, function={:?}, length=0x{:x}\n", + seq, + M::FUNCTION, + size_in_bytes, + ); + + Ok(()) + } +} + +/// Trait representing messages received from the GSP. +/// +/// A reply that [`Cmdq::send_command`] waits for, or an event that [`Cmdq::await_msg`] waits for. +/// The receiver matches a message's function code against [`Self::FUNCTION`] and decodes the +/// message with [`Self::read`]. +pub(crate) trait MessageFromGsp: Sized { + /// Function identifying this message from the GSP. + const FUNCTION: MsgFunction; + + /// Error type returned by [`MessageFromGsp::read`]. + type InitError; + + /// Type containing the raw message to be read from the message queue. + type Message: FromBytes; + + /// Method reading the message from the message queue and returning it. + /// + /// From a `Self::Message` and a [`SBufferIter`], constructs an instance of `Self` and returns + /// it. + fn read( + msg: &Self::Message, + sbuffer: &mut SBufferIter>, + ) -> Result; +} + +/// A RPC message ready to be processed from the message queue. +pub(super) struct RpcMessage<'a> { + // Reference to the RPC header of the message. + header: &'a RpcMessageHeader, + // Slices to the contents of the message. The second slice is empty unless the message loops + // over the message queue. + contents: (&'a [u8], &'a [u8]), +} + +impl<'a> RpcMessage<'a> { + /// Validate the RPC layer of `element` and returns its RPC header and its contents trimmed down + /// to the RPC payload. + /// + /// # Errors + /// + /// - `EIO` if the element is shorter than the payload length advertised by the RPC header. + pub(super) fn parse(dev: &device::Device, element: GspMessage<'a>) -> Result> { + let GspMessage { + header, + contents: (slice_1, slice_2), + } = element; + + let rpc_header = header.rpc_header(); + let payload_length = rpc_header.rpc_length(); + + dev_dbg!( + dev, + "GSP RPC: receive: seq# {}, function={:?}, length=0x{:x}\n", + rpc_header.sequence(), + rpc_header.function(), + payload_length, + ); + + // Check that the driver read area is large enough for the message. + if slice_1.len() + slice_2.len() < payload_length { + return Err(EIO); + } + + // Cut the message slices down to the actual length of the message. + let (slice_1, slice_2) = if slice_1.len() > payload_length { + // PANIC: we checked above that `slice_1` is at least as long as `payload_length`. + (slice_1.split_at(payload_length).0, &slice_2[0..0]) + } else { + ( + slice_1, + // PANIC: we checked above that `slice_1.len() + slice_2.len()` is at least as + // large as `payload_length`. + slice_2.split_at(payload_length - slice_1.len()).0, + ) + }; + + Ok(RpcMessage { + header: rpc_header, + contents: (slice_1, slice_2), + }) + } + + /// Logs an event, meaning a message that no caller was waiting for. + /// + /// An OS error or robust-channel record is logged at error level and an unknown function code + /// at warning level. Other events are not logged. + pub(super) fn log(&self, dev: &device::Device) { + let function = self.header.function(); + let seq = self.header.sequence(); + + match function { + Ok(MsgFunction::OsErrorLog) => { + dev_err!(dev, "GSP reported an OS error (seq {})\n", seq); + } + Ok(MsgFunction::RcTriggered) => { + dev_err!(dev, "GSP triggered robust-channel recovery (seq {})\n", seq); + } + // Nothing to do for the remaining known function codes. + Ok(_) => {} + Err(raw) => { + dev_warn!( + dev, + "unknown GSP message function {:#x} (seq {})\n", + raw, + seq + ); + } + } + } +} + +impl Cmdq<'_> { + /// Sends `command` to the GSP and waits for the reply. + /// + /// Events that arrive before the reply are logged and consumed. + /// + /// The queue is locked for the entire send+receive cycle to ensure that no other command can + /// be interleaved. + /// + /// # Errors + /// + /// - `ETIMEDOUT` if space does not become available to send the command, or if the reply does + /// not arrive within [`Self::RECEIVE_TIMEOUT`] of the send, however many events arrive + /// while waiting. + /// - `EIO` if the variable payload requested by the command has not been entirely + /// written to by its [`CommandToGsp::init_variable_payload`] method. + /// + /// Error codes returned by the command and reply initializers are propagated as-is. + pub(crate) fn send_command(&self, command: M) -> Result + where + M: CommandToGsp, + M::Reply: MessageFromGsp, + Error: From, + Error: From<::InitError>, + { + let mut inner = self.inner.lock(); + inner.send_command(command)?; + + inner.await_msg() + } + + /// Sends `command` to the GSP without waiting for a reply. + /// + /// # Errors + /// + /// - `ETIMEDOUT` if space does not become available within the timeout. + /// - `EIO` if the variable payload requested by the command has not been entirely + /// written to by its [`CommandToGsp::init_variable_payload`] method. + /// + /// Error codes returned by the command initializers are propagated as-is. + pub(crate) fn send_command_no_wait(&self, command: M) -> Result + where + M: CommandToGsp, + Error: From, + { + self.inner.lock().send_command(command) + } + + /// Waits for an unsolicited GSP event of type `M`. Events that arrive before it are logged and + /// consumed. + /// + /// The queue mutex is held for the whole wait, up to [`Self::RECEIVE_TIMEOUT`], so no other + /// caller can send a command or consume an event meanwhile. + /// + /// # Errors + /// + /// - `ETIMEDOUT` if the event does not arrive within [`Self::RECEIVE_TIMEOUT`] of the call, + /// however many other events arrive while waiting. + /// - `EIO` if a message fails framing or checksum validation. + /// + /// Error codes returned by [`MessageFromGsp::read`] are propagated as-is. + pub(crate) fn await_msg(&self) -> Result + where + // This allows all error types, including `Infallible`, to be used for `M::InitError`. + Error: From, + { + self.inner.lock().await_msg() + } +} + +impl CmdqInner<'_> { + /// Sends `command` to the GSP. + /// + /// The command may be split into multiple messages if it is large. + /// + /// # Errors + /// + /// - `ETIMEDOUT` if space does not become available within the timeout. + /// - `EIO` if the variable payload requested by the command has not been entirely + /// written to by its [`CommandToGsp::init_variable_payload`] method. + /// + /// Error codes returned by the command initializers are propagated as-is. + fn send_command(&mut self, command: M) -> Result + where + M: CommandToGsp, + Error: From, + { + match SplitState::new(command)? { + SplitState::Single(command) => self.send_command_element(RpcCommandElement(command)), + SplitState::Split(command, mut continuations) => { + self.send_command_element(RpcCommandElement(command))?; + + while let Some(continuation) = continuations.next() { + self.send_command_element(RpcCommandElement(continuation))?; + } + + Ok(()) + } + } + } + + /// Receives a message of type `M`, waiting up to [`Cmdq::RECEIVE_TIMEOUT`] from the call. + /// + /// Any other message that arrives first is logged as an event and does not extend the + /// deadline. + /// + /// # Errors + /// + /// - `ETIMEDOUT` if no message of type `M` arrives before the deadline, however many other + /// messages arrive while waiting. + /// - `EIO` if a message fails framing or checksum validation. + /// + /// Error codes returned by [`MessageFromGsp::read`] are propagated as-is. + fn await_msg(&mut self) -> Result + where + // This allows all error types, including `Infallible`, to be used for `M::InitError`. + Error: From, + { + let f = |message: GspParsedMessage<'_>| { + let GspParsedMessage::Rpc(rpc_message) = message; + let function = rpc_message.header.function(); + if matches!(function, Ok(f) if f == M::FUNCTION) { + let (cmd, contents_1) = + M::Message::from_bytes_prefix(rpc_message.contents.0).ok_or(EIO)?; + let mut sbuffer = SBufferIter::new_reader([contents_1, rpc_message.contents.1]); + + M::read(cmd, &mut sbuffer) + .map_err(|e| e.into()) + .inspect(|_| { + if !sbuffer.is_empty() { + dev_warn!( + self.dev, + "GSP message {:?} has unprocessed data\n", + M::FUNCTION + ); + } + }) + } else { + rpc_message.log(self.dev); + + Err(ENOMSG) + } + }; + + self.await_msg_with(f) + } +} diff --git a/drivers/gpu/nova-core/gsp/cmdq/continuation.rs b/drivers/gpu/nova-core/gsp/cmdq/rpc/continuation.rs similarity index 100% rename from drivers/gpu/nova-core/gsp/cmdq/continuation.rs rename to drivers/gpu/nova-core/gsp/cmdq/rpc/continuation.rs diff --git a/drivers/gpu/nova-core/gsp/commands.rs b/drivers/gpu/nova-core/gsp/commands.rs index cdbb13674f08..ceac0b0f9423 100644 --- a/drivers/gpu/nova-core/gsp/commands.rs +++ b/drivers/gpu/nova-core/gsp/commands.rs @@ -23,9 +23,11 @@ gpu::Chipset, gsp::{ cmdq::{ + rpc::{ + CommandToGsp, + MessageFromGsp, // + }, Cmdq, - CommandToGsp, - MessageFromGsp, NoReply, // }, fw::{ diff --git a/drivers/gpu/nova-core/gsp/sequencer.rs b/drivers/gpu/nova-core/gsp/sequencer.rs index 250adc9fe74f..9f5ab08def2c 100644 --- a/drivers/gpu/nova-core/gsp/sequencer.rs +++ b/drivers/gpu/nova-core/gsp/sequencer.rs @@ -28,8 +28,8 @@ }, gsp::{ cmdq::{ - Cmdq, - MessageFromGsp, // + rpc::MessageFromGsp, + Cmdq, // }, fw, GspBootContext, -- 2.56.0