[GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[Vignesh Raghavendra]

[-- Attachment #1.1: Type: text/plain, Size: 10418 bytes --]

Hi ARM SoC maintainers

Please pull DT updates for K3 Platforms for v7.1.
Note there is a patch touching embedded-controller/kontron,sl28cpld.yaml as it is part of 
series that removes of Kontron SMARC-sAM67 board support.


The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:

  Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v7.1

for you to fetch changes up to 47c806de9e9cf171d197f2f0df86df7f2bd1aa56:

  arm64: dts: ti: k3-pinctrl: sort shift values numerically (2026-03-27 19:55:06 +0530)

----------------------------------------------------------------
TI K3 device tree updates for v7.1

Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files

SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling

J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node

J722S:
- Add main_i2c4 device node

J7200:
- Make MAIN domain system control bus a simple-bus

Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support

AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup

AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22

AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states

AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node

AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
  wakeup
- Verdin: Add Zinnia support and misc cleanup

AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay

AM69 Aquila:
- Fix DP regulator enable GPIO

J721S2 CPB:
- Add QSPI flash partition details

Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
  are dropped as board is no longer planned for production

----------------------------------------------------------------
Andrew Davis (2):
      arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
      arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus

Aniket Limaye (1):
      arm64: dts: ti: k3-j722s: Add main_i2c4 device node

Anurag Dutta (1):
      arm64: dts: ti: k3-j721s2-common-proc-board: Add QSPI flash partition details

Dhruva Gole (1):
      arm64: dts: ti: k3-am62l: support cpufreq scaling

Dominik Haller (5):
      arm64: dts: ti: k3-am68-phyboard-izar: Assign dss clocks
      arm64: dts: ti: k3-am68-phycore-som: Add DSI->LVDS bridge
      arm64: dts: ti: k3-am68-phyboard-izar: Add LVDS-Display
      arm64: dts: ti: k3-j721s2-main: Add DSI1
      arm64: dts: ti: k3-am68-phyboard-izar: Add PEB-AV-15 overlay

Francesco Dolcini (8):
      arm64: dts: ti: am62-verdin: Enable pullup for eMMC data pins
      dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
      arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
      arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
      arm64: dts: ti: k3-am62-verdin: Add Zinnia
      arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
      arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
      arm64: dts: ti: k3-am62p-verdin: Add Zinnia

Franz Schnyder (2):
      arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
      arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO

Judith Mendez (3):
      arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
      arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
      arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins

Kendall Willis (10):
      arm64: dts: ti: k3-am62d2-evm: Set wakeup-source system-states
      arm64: dts: ti: k3-am62l: include WKUP_UART0 in wakeup peripheral window
      arm64: boot: dts: ti: k3-am62l-wakeup: create label for wkup_uart0 target-module
      arm64: boot: dts: ti: k3-am62l3-evm: define wkup_uart0 pins
      arm64: boot: dts: ti: k3-am62l3-evm: enable wkup_uart0_target node
      arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
      arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
      arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
      arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
      arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup

Meghana Malladi (1):
      arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support

Michael Walle (3):
      arm64: dts: ti: remove the Kontron SMARC-sAM67
      dt-bindings: mfd: sl28cpld: Drop sa67mcu compatible
      dt-bindings: arm: ti: Drop Kontron SMARC-sAM67 module

Rasmus Villemoes (2):
      arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
      arm64: dts: ti: k3-pinctrl: sort shift values numerically

Shiva Tripathi (1):
      arm64: dts: ti: k3-am62l-main: Add RNG node

Siddharth Vadapalli (5):
      arm64: dts: ti: k3-am642-{evm,sk}: add ti,min-output-impedance
      arm64: dts: ti: k3-am654-base-board: add ti,min-output-impedance
      arm64: dts: ti: k3-j7200-common-proc-board: add ti,min-output-impedance
      arm64: dts: ti: k3-j721e-common-proc-board: add ti,min-output-impedance
      arm64: dts: ti: k3-am62a7-sk: Fix pin name in comment from M19 to N22

Thomas Richard (TI) (1):
      arm64: dts: ti: k3-j721s2: Use ti,j7200-padconf compatible

Wadim Egorov (1):
      arm64: dts: ti: k3-am62-phycore-som: Add 128MiB of global CMA

 Documentation/devicetree/bindings/arm/ti/k3.yaml             |    5 +-
 .../bindings/embedded-controller/kontron,sl28cpld.yaml       |    7 +-
 arch/arm64/boot/dts/ti/Makefile                              |   27 +-
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts                     |   14 +-
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi              |    7 +
 arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi            |  493 +++++
 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi                   |   42 +-
 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts    |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts       |   22 +
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts                      |   15 +-
 arch/arm64/boot/dts/ti/k3-am62d2-evm.dts                     |   82 +-
 arch/arm64/boot/dts/ti/k3-am62l-main.dtsi                    |    7 +
 arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi                  |    7 +-
 arch/arm64/boot/dts/ti/k3-am62l.dtsi                         |    5 +-
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts                     |   32 +-
 arch/arm64/boot/dts/ti/k3-am62l3.dtsi                        |   47 +
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi       |   13 +-
 arch/arm64/boot/dts/ti/k3-am62p-verdin-zinnia.dtsi           |  469 ++++
 arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi                  |   29 +-
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                      |   19 +-
 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-zinnia.dts   |   22 +
 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-zinnia.dts      |   22 +
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi               |   13 +-
 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso              |  168 ++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts                      |    1 +
 arch/arm64/boot/dts/ti/k3-am642-sk.dts                       |    2 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts               |    1 +
 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso       |  146 --
 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts        | 1091 ----------
 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso       |   26 -
 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso      |   61 -
 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso |   31 -
 .../boot/dts/ti/k3-am68-phyboard-izar-lvds-ph128800t006.dtso |  125 ++
 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso  |  191 ++
 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts             |   17 +
 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi              |   17 +
 arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts             |    2 +-
 arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts                |    2 +-
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts        |    1 +
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi                    |    5 +-
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts        |    1 +
 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts       |   42 +
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi                   |   50 +-
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi             |   12 +-
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi                    |   13 +
 arch/arm64/boot/dts/ti/k3-j722s.dtsi                         |    3 +-
 arch/arm64/boot/dts/ti/k3-pinctrl.h                          |   82 +-
 47 files changed, 2030 insertions(+), 1481 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-verdin-zinnia.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-zinnia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-zinnia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso
 delete mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-lvds-ph128800t006.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]

[GIT PULL 2/2] arm64: defconfig: TI K3 updates for v7.1

[Vignesh Raghavendra]

The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:

  Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-config-for-v7.1

for you to fetch changes up to 079a2e18b776f391d6b16b8710af79976fba14aa:

  arm64: defconfig: Enable DP83TG720 PHY driver (2026-03-29 19:51:25 +0530)

----------------------------------------------------------------
TI K3 defconfig updates for v7.1

Generic Fixes/Cleanups:
- Remove SENSORS_SA67MCU as the driver is dropped

Board Specific Features and Fixes:
AM69:
- Enable configurations for Toradex Aquila AM69

AM64 / AM62:
- Enable DP83TG720 PHY driver

----------------------------------------------------------------
Francesco Dolcini (1):
      arm64: defconfig: Enable configurations for Toradex Aquila AM69

Meghana Malladi (1):
      arm64: defconfig: Enable DP83TG720 PHY driver

Michael Walle (1):
      arm64: defconfig: remove SENSORS_SA67MCU

 arch/arm64/configs/defconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Re: [GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Wed, 1 Apr 2026 22:44:03 +0530 you wrote:
> Hi ARM SoC maintainers
> 
> Please pull DT updates for K3 Platforms for v7.1.
> Note there is a patch touching embedded-controller/kontron,sl28cpld.yaml as it is part of
> series that removes of Kontron SMARC-sAM67 board support.
> 
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/2] arm64: dts: ti: K3 updates for v7.1
    (no matching commit)
  - [GIT,PULL,2/2] arm64: defconfig: TI K3 updates for v7.1
    https://git.kernel.org/soc/soc/c/1c4c5c50ec58

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[Arnd Bergmann]

On Wed, Apr 1, 2026, at 19:14, Vignesh Raghavendra wrote:

Hi Vignesh,

I've merged this now, but I see that there are a number of
patches that look like they should have been part of an
earlier pull request for 7.0 and possibly backports:

> Generic Fixes/Cleanups:
> - ti,min-output-impedance addition to all K3 board DT files
>
> AM69 Aquila:
> - Fix DP regulator enable GPIO
>
> AM62A7-SK:
> - Fix pin name in comment from M19 to N22
>
> AM62L3 EVM:
> - Disable MMC1 internal pulls on data pins
>
> AM62P:
> - SK: Disable MMC1 internal pulls on data pins and enable Main UART

Can you have a look to see if my intuition is right on these
ones, and make sure they get merged more quickly in the future?

    Arnd

Re: [GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[Vignesh Raghavendra]

Hi Arnd,

On 03/04/26 03:30, Arnd Bergmann wrote:
> On Wed, Apr 1, 2026, at 19:14, Vignesh Raghavendra wrote:
> 
> Hi Vignesh,
> 
> I've merged this now, but I see that there are a number of
> patches that look like they should have been part of an
> earlier pull request for 7.0 and possibly backports:
> 
>> Generic Fixes/Cleanups:
>> - ti,min-output-impedance addition to all K3 board DT files
>>
>> AM69 Aquila:
>> - Fix DP regulator enable GPIO
>>
>> AM62A7-SK:
>> - Fix pin name in comment from M19 to N22
>>
>> AM62L3 EVM:
>> - Disable MMC1 internal pulls on data pins
>>
>> AM62P:
>> - SK: Disable MMC1 internal pulls on data pins and enable Main UART
> 
> Can you have a look to see if my intuition is right on these
> ones, and make sure they get merged more quickly in the future?
> 

Ah yes. These are non urgent fixes in terms of impact on functionality
(except AM69 Aquila one perhaps), so decided to club them into the v7.1.
But, will keep in mind to send them earlier next time. Thanks!



-- 
Regards
Vignesh
https://ti.com/opensource

Re: [GIT PULL 1/2] arm64: dts: ti: K3 updates for v7.1

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Wed, 1 Apr 2026 22:44:03 +0530 you wrote:
> Hi ARM SoC maintainers
> 
> Please pull DT updates for K3 Platforms for v7.1.
> Note there is a patch touching embedded-controller/kontron,sl28cpld.yaml as it is part of
> series that removes of Kontron SMARC-sAM67 board support.
> 
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/2] arm64: dts: ti: K3 updates for v7.1
    https://git.kernel.org/soc/soc/c/44b5179e0924
  - [GIT,PULL,2/2] arm64: defconfig: TI K3 updates for v7.1
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html