Linux SOC development
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Lee Jones <lee@kernel.org>
Cc: "Pavel Machek" <pavel@ucw.cz>,
	linux-leds@vger.kernel.org, "Arnd Bergmann" <arnd@arndb.de>,
	soc@kernel.org, "Gregory CLEMENT" <gregory.clement@bootlin.com>,
	arm@kernel.org, "Andy Shevchenko" <andy@kernel.org>,
	"Hans de Goede" <hdegoede@redhat.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH leds v6 07/12] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
Date: Fri,  8 Nov 2024 14:28:40 +0100	[thread overview]
Message-ID: <20241108132845.31005-8-kabel@kernel.org> (raw)
In-Reply-To: <20241108132845.31005-1-kabel@kernel.org>

Recall that on Turris Omnia, the LED controller has a global brightness
property, which allows the user to make the front LED panel dimmer.

There is also a button on the front panel, which by default is
configured so that pressing it changes the global brightness to a lower
value (unless it is at 0%, in which case pressing the button changes the
global brightness to 100%).

Newer versions of the MCU firmware support informing the SOC that the
brightness was changed by button press event via an interrupt.

Now that we have the turris-omnia-mcu driver, which adds support for MCU
interrupts, add the ability to inform the userspace (via a sysfs
notification) that the global brightness was changed.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/leds/Kconfig             |  1 +
 drivers/leds/leds-turris-omnia.c | 62 ++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index fcbe93b61e49..9ab6b56898c6 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -218,6 +218,7 @@ config LEDS_TURRIS_OMNIA
 	depends on MACH_ARMADA_38X || COMPILE_TEST
 	depends on OF
 	depends on TURRIS_OMNIA_MCU
+	depends on TURRIS_OMNIA_MCU_GPIO
 	select LEDS_TRIGGERS
 	help
 	  This option enables basic support for the LEDs found on the front
diff --git a/drivers/leds/leds-turris-omnia.c b/drivers/leds/leds-turris-omnia.c
index 7d2ed0c6500a..b2c37dd2e1cc 100644
--- a/drivers/leds/leds-turris-omnia.c
+++ b/drivers/leds/leds-turris-omnia.c
@@ -43,12 +43,15 @@ struct omnia_led {
  * @client:			I2C client device
  * @lock:			mutex to protect
  * @has_gamma_correction:	whether the MCU firmware supports gamma correction
+ * @brightness_knode:		kernel node of the "brightness" device sysfs attribute (this is the
+ *				driver specific global brightness, not the LED classdev brightness)
  * @leds:			flexible array of per-LED data
  */
 struct omnia_leds {
 	struct i2c_client *client;
 	struct mutex lock;
 	bool has_gamma_correction;
+	struct kernfs_node *brightness_knode;
 	struct omnia_led leds[];
 };
 
@@ -373,6 +376,59 @@ static struct attribute *omnia_led_controller_attrs[] = {
 };
 ATTRIBUTE_GROUPS(omnia_led_controller);
 
+static irqreturn_t omnia_brightness_changed_threaded_fn(int irq, void *data)
+{
+	struct omnia_leds *leds = data;
+
+	if (unlikely(!leds->brightness_knode)) {
+		/*
+		 * Note that sysfs_get_dirent() may sleep. This is okay, because we are in threaded
+		 * context.
+		 */
+		leds->brightness_knode = sysfs_get_dirent(leds->client->dev.kobj.sd, "brightness");
+		if (!leds->brightness_knode)
+			return IRQ_NONE;
+	}
+
+	sysfs_notify_dirent(leds->brightness_knode);
+
+	return IRQ_HANDLED;
+}
+
+static void omnia_brightness_knode_put(void *data)
+{
+	struct omnia_leds *leds = data;
+
+	if (leds->brightness_knode)
+		sysfs_put(leds->brightness_knode);
+}
+
+static int omnia_request_brightness_irq(struct omnia_leds *leds)
+{
+	struct device *dev = &leds->client->dev;
+	int ret;
+
+	if (!leds->client->irq) {
+		dev_info(dev,
+			 "Brightness change interrupt supported by MCU firmware but not described in device-tree\n");
+
+		return 0;
+	}
+
+	/*
+	 * Registering the brightness_knode destructor before requesting the IRQ ensures that on
+	 * removal the brightness_knode sysfs node is put only after the IRQ is freed.
+	 * This is needed because the interrupt handler uses the knode.
+	 */
+	ret = devm_add_action(dev, omnia_brightness_knode_put, leds);
+	if (ret < 0)
+		return ret;
+
+	return devm_request_threaded_irq(dev, leds->client->irq, NULL,
+					 omnia_brightness_changed_threaded_fn, IRQF_ONESHOT,
+					 "leds-turris-omnia", leds);
+}
+
 static int omnia_mcu_get_features(const struct i2c_client *mcu_client)
 {
 	u16 reply;
@@ -459,6 +515,12 @@ static int omnia_leds_probe(struct i2c_client *client)
 			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
 	}
 
+	if (ret & OMNIA_FEAT_BRIGHTNESS_INT) {
+		ret = omnia_request_brightness_irq(leds);
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "Cannot request brightness IRQ\n");
+	}
+
 	mutex_init(&leds->lock);
 
 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
-- 
2.45.2


  parent reply	other threads:[~2024-11-08 13:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-08 13:28 [PATCH leds v6 00/12] Turris Omnia LED driver changes Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 01/12] turris-omnia-mcu-interface.h: Move command execution function to global header Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 02/12] leds: turris-omnia: Use command execution functions from the MCU driver Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 03/12] turris-omnia-mcu-interface.h: Add LED commands related definitions to global header Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 04/12] leds: turris-omnia: Use global header for MCU command definitions Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 05/12] dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 06/12] leds: turris-omnia: Document driver private structures Marek Behún
2024-11-11  9:59   ` Marek Behún
2024-11-08 13:28 ` Marek Behún [this message]
2024-11-08 13:28 ` [PATCH leds v6 08/12] platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 09/12] leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 10/12] leds: turris-omnia: Use dev_err_probe() where appropriate Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 11/12] leds: turris-omnia: Use uppercase first letter in all comments Marek Behún
2024-11-08 13:28 ` [PATCH leds v6 12/12] ARM: dts: turris-omnia: Add global LED brightness change interrupt Marek Behún
2024-11-08 13:34   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241108132845.31005-8-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=andy@kernel.org \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox